Research and Design of Reconfigurable Composite Field Multiplication in Symmetric Cipher Algorithms

The composite field multiplication is an important and complex module in symmetric cipher algorithms, and its realization performance directly restricts the processing speed of symmetric cipher algorithms. Based on the characteristics of composite field multiplication in symmetric cipher algorithms and the realization principle of its reconfigurable architectures, this paper describes the reconfigurable composite field multiplication over GF（（2^8）k） （k=1,2,3,4） in RISC （reduced instruction set computer） processor and VLIW （very long instruction word） processor architecture, respectively. Through configuration, the architectures can realize the composite field multiplication over GF（2^8）, GF （（2^8）2）, GF（（28）3） and GF（（28）4） flexibly and efficiently. We simulated the function of circuits and synthesized the reconfigurable design based on the 0.18 μm CMOS （complementary metal oxide semiconductor） standard cell library and the comparison with other same kind designs. The result shows that the reconfigurable design proposed in the paper can provide higher efficiency under the premise of flexibility.

A New Interpretation of the Higgs Vacuum Potential Energy Based on a Planckion Composite Model for the Higgs

We present a new interpretation of the Higgs field as a composite particle made up of a positive, with, a negative mass Planck particle. According to the Winterberg hypothesis, space, i.e., the vacuum, consists of both positive and negative physical massive particles, which he called planckions, interacting through strong superfluid forces. In our composite model for the Higgs boson, there is an intrinsic length scale associated with the vacuum, different from the one introduced by Winterberg, where, when the vacuum is in a perfectly balanced state, the number density of positive Planck particles equals the number density of negative Planck particles. Due to the mass compensating effect, the vacuum thus appears massless, chargeless, without pressure, energy density, or entropy. However, a situation can arise where there is an effective mass density imbalance due to the two species of Planck particle not matching in terms of populations, within their respective excited energy states. This does not require the physical addition or removal of either positive or negative Planck particles, within a given region of space, as originally thought. Ordinary matter, dark matter, and dark energy can thus be given a new interpretation as residual vacuum energies within the context of a greater vacuum, where the populations of the positive and negative energy states exactly balance. In the present epoch, it is estimated that the dark energy number density imbalance amounts to, , per cubic meter, when cosmic distance scales in excess of, 100 Mpc, are considered. Compared to a strictly balanced vacuum, where we estimate that the positive, and the negative Planck number density, is of the order, 7.85E54 particles per cubic meter, the above is a very small perturbation. This slight imbalance, we argue, would dramatically alleviate, if not altogether eliminate, the long standing cosmological constant problem.

INFILTRATION KINETICS MODEL OF LIQUID METAL INTO A FIBROUS PREFORM IN CENTRIFUGAL ACCELERATING FIELD

The infiltration kinetics of the metal melt into a fibrous preform in centrifugal accelerating field is analyzed on the basis of Darcy's law and the assumption that the fibrous preform is treated as 'bundle of capillaries' The critical rotating speed is analyzed with the established model The influences of the metal melt mass,the rotating speed of the equipment,the casting height, the original outer radius of the metal melt and the fibrous volume fraction in fibrous preform on infilatration are studied The results show that the critical rotating speed is dependent on critical pressure, casting height, metal melt mass and the character of fibrous preform With the increase in the metal melt mass, rotating speed of the equipment and original outer radius of the metal melt, or the decrease in casting height and fibrous volume fraction in fibrous of the metal melt,or the decrease in casting height and fibrous volume fraction in fibrous preform,infiltration of metal melt for fibrous preform becomes easier.

Microstructure evolution of immiscible alloy solidified under the effect of composite electric and magnetic fields

Solidification experiments were performed with Lead-Aluminum immiscible alloy under the effect of composite electric and magnetic fields(CEMFs).The results demonstrate that CEMFs not only decrease the size of minority phase particles(MPPs)but also promote a more uniform distribution of the MPPs.A theoretical model was built to describe the microstructure evolution during cooling the immiscible alloy.The solidification process of Pb-0.4 wt.%Al alloy under the effect of the CEMFs was simulated.The numerical results are well consistent with the experimental data.These results demonstrate that CEMFs affect the solidification process through changing melt convection and the nucleation behavior of minority phase droplets(MPDs).On one hand,the CEMFs can inhibit the convection and lead to the homogeneous distribution of MPPs along the radial direction of the sample.On the other hand,the CEMFs can increase the nucleation driving force for the MPDs,which decreases the average radius of MPDs and boosts the formation of dispersed solidification structures.This research indicates that the application of CEMFs is a promising strategy for controlling the microstructure of immiscible alloys.

On the Cosmic Evolution of the Quantum Vacuum Using Two Variable G Models and Winterberg’s Thesis

We work within a Winterberg framework where space, i.e., the vacuum, consists of a two component superfluid/super-solid made up of a vast assembly (sea) of positive and negative mass Planck particles, called planckions. These material particles interact indirectly, and have very strong restoring forces keeping them a finite distance apart from each other within their respective species. Because of their mass compensating effect, the vacuum appears massless, charge-less, without pressure, net energy density or entropy. In addition, we consider two varying G models, where G, is Newton’s constant, and G-1, increases with an increase in cosmological time. We argue that there are at least two competing models for the quantum vacuum within such a framework. The first follows a strict extension of Winterberg’s model. This leads to nonsensible results, if G increases, going back in cosmological time, as the length scale inherent in such a model will not scale properly. The second model introduces a different length scale, which does scale properly, but keeps the mass of the Planck particle as, ± the Planck mass. Moreover we establish a connection between ordinary matter, dark matter, and dark energy, where all three mass densities within the Friedman equation must be interpreted as residual vacuum energies, which only surface, once aggregate matter has formed, at relatively low CMB temperatures. The symmetry of the vacuum will be shown to be broken, because of the different scaling laws, beginning with the formation of elementary particles. Much like waves on an ocean where positive and negative planckion mass densities effectively cancel each other out and form a zero vacuum energy density/zero vacuum pressure surface, these positive mass densities are very small perturbations (anomalies) about the mean. This greatly alleviates, i.e., minimizes the cosmological constant problem, a long standing problem associated with the vacuum.

Research on corona discharge suppression of high-voltage direct-current transmission lines based on dielectric-film-covered conductor

Corona discharge suppression for high-voltage direct-current(HVDC)transmission lines at line terminals such as converter stations is a subject that requires attention.In this paper,a method based on a conductor covered with dielectric film is proposed and implemented through a bench-scale setup.Compared with the bare conductor,the corona discharge suppression effect of the dielectric-film-covered conductor under positive polarity is studied from the composite field strength and ion current density using a line-plate experimental device.The influences of film thickness and film material on the corona discharge suppression effect are investigated.The charge accumulation and dissipation characteristics of different film materials are also studied.The results show that the conductor covered with dielectric film has excellent ability to inhibit corona discharge.The ground-level composite field strength of the conductor covered with dielectric film is lower than its nominal field strength,and its ion current density is at the nA m^(−2) level.The corona threshold voltage can be promoted by increasing the film thickness,but the ability to inhibit corona discharge becomes weak.The larger the surface electric field strength,the more charge accumulated,but the faster the charge dissipation rate.Compared with polyvinyl chloride film,cross-linked polyethylene film has stronger charge accumulation ability and slower charge dissipation rate,which can better restrain the corona discharge of HVDC transmission lines.

Elastic deformation behavior of CuZrAlNb metallic glass matrix composites with different crystallization degrees

The room temperature brittleness has been a long standing problem in bulk metallic glasses realm.This has seriously limited the application potential of metallic glasses and their composites.The elastic deformation behaviors of metallic glass matrix composites are closely related to their plastic deformation states.The elastic deformation behaviors of Cu48-xZr48Al4Nbx（x=0,3at.%）metallic glass matrix composites（MGMCs）with different crystallization degrees were investigated using an in-situ digital image correlation（DIC）technique during tensile process.With decreasing crystallization degree,MGMC exhibits obvious elastic deformation ability and an increased tensile fracture strength.The notable tensile elasticity is attributed to the larger shear strain heterogeneity emerging on the surface of the sample.This finding has implications for the development of MGMCs with excellent tensile properties.

Novel quantum circuit implementation of Advanced Encryption Standard with low costs

In this study, we examine how the quantum circuit of the Advanced Encryption Standard(AES) can be optimized from two aspects, i.e., number of qubits and T-depth. To reduce the number of qubits, we present three kinds of improved quantum circuits of S-box for different phases in the AES. We found that the number of qubits in the round function can be decreased by introducing the circuit sending |a> to |S(a)>. As a result, compared with the previous quantum circuits where 400/640/768 qubits are required,our circuits of AES-128/-192/-256 only require 270/334/398 qubits. To reduce the T-depth, we propose a new circuit of AES's S-box with a T-depth of 4. Accordingly, the T-depth of our AES-128/-192/-256 quantum circuits become 80/80/84 instead of120/120/126 in a previous study.

Low-power clock-less hardware implementation of the rijndael S-box for wireless sensor networks

The recent development of microelectronics techniques and advances in wireless communications have made it feasible to design low-cost, low-power, multifunctional and intelligent sensor nodes for wireless sensor networks （WSN）. The design challenges for an efficient WSN mainly lie in two issues： power and security. The Rijindael algorithm is a candidate algorithm for encrypting data in WSN. The SubByte （S-box） transformation is the main building block of the Rijindael algorithm. It dominates the hardware complexity and power consumption of the Rijindael cryptographic engine. This article proposes a clock-less hardware implementation of the S-box. In this S-box, l） The composite field arithmetic in GF（（2^4））2 was used to implement the compact datapath circuit; 2） A high-efficiency latch controller was attained by utilizing the four-phase micropipeline. The presented hardware circuit is an application specific integrated circuit （ASIC） on 0.25 μm complementary mental oxide semiconductor （CMOS） process using three metal layers. The layout simulation results show that the proposed S-box offers low-power consumption and high speed with moderate area penalty. This study also proves that the clock-less design methodology can implement high- performance cryptographic intellectual property （IP） core for the wireless sensor node chips.