Effect of composite supports on the methanation activity of Co-Mo-based sulphur-resistant catalysts

The effects of composite supports of CeO2-Al2O3, MgO-Al2O3, TiO2-Al2O3 or ZrO2-Al2O3 on the methanation activity of supported Co-Mo-based sulphur-resistant catalysts were investigated. The catalysts were further characterized by nitrogen adsorption measurement, X-ray diffraction and X-ray photoelectron spectroscopy. The catalyst of 5%CoO-15%MoO3 supported on CeO2-Al2O3, MgO-Al2O3, TiO2-Al2O3 or ZrO2-Al2O3 composite oxides, respectively, showed different catalytic performances of syngas methanation in the presence of hydrogen sulphide as compared with that of the 5%CoO-15%MoO3/Al2O3 catalyst. The Co-Mo/CeO2-Al2O3 catalyst shows the highest methanation activity among the tested catalysts. The enhanced methanation activity may be attributed to the improvement of the dispersion of active metal species and the inhibition of the formation of S6＋.

Preparation and Characterization of Nanosized CeO2/γ-Al2O3 Composite Supports

Based on the γ-Al2O3 support with large-size pores, impregnation-deposition method was adopted to prepare the nano CeO_2/γ-Al2O3 composite supports. The results of XRD showed that there was no CeO_2-Al2O3 mixture or solid solution, indicating that CeO_2 was only loaded on the surface of Al2O3. The CeO_2/γ-Al2O3 composite support had larger specific surface area (170 m2·g-1), while for the non-loaded nanosized CeO_2, the specific surface area was small(～50 m2·g-1). The influence of impregnation and drying methods on the surface properties, thermal stability and crystal structure of composite supports was characterized by XRD, DTA and BET. The CeO_2/γ-Al2O3 composite support prepared by vacuum impregnation and microwave drying was better than that prepared by conventional impregnation and drying.

Effects of preparation conditions of Au/FeO_x /Al_2O_3 catalysts prepared by a modified two-step method on the stability for CO oxidation

Composite oxide FeO x /Al 2 O 3 -supported gold catalysts were prepared by a modified two-step method. The effects of preparation conditions on the initial catalytic activity and long-time stability were studied for CO oxidation. XRD, XPS and in situ FTIR were employed to investigate the state of FeO x and the species on the catalyst surface. The results showed that Au/FeO x /Al 2 O 3 catalysts prepared by this method exhibited high activity and high stability in a wide pH value range. Calcination pretreatment was proved to be beneficial to improving the activity and stability. The beneficial effects of FeO x acting as a structural promoter could be ascribed to the ability to supply active oxygen species. As the precursor of FeO x , Fe（NO 3 ） 3 is superior to FeCl 3 for obtaining higher stability.

High-rise building fire pre-warning model based on the support vector regression

Aiming at reducing the deficiency of the traditional fire pre-warning algorithms and the intelligent fire pre-warning algorithms such as artificial neural network,and then to improve the accuracy of fire prewarning for high-rise buildings,a composite fire pre-warning controller is designed according to the characteristic（ nonlinear,less historical data,many influence factors）,also a high-rise building fire pre-warning model is set up based on the support vector regression（ SV R）. Then the wood fire standard history data is applied to make empirical analysis. The research results can provide a reliable decision support framework for high-rise building fire pre-warning.

Effects of support property on the catalytic performance of CeO_2-ZrO_2-CrO_x for 1,2-dichloroethane oxidation

HZSM-5, Al_2O_3, TiO_2 and SiO_2 supported CeO_2-ZrO_2-CrO_x catalysts were prepared by deposition-precipitation method and tested for deep catalytic oxidation of 1,2-dichloroethane（DCE）, as one of the common chlorinated organic pollutants. All the catalysts were characterized by means of N_2 adsorption-desorption, X-ray photoelectron spectroscopy（XPS）, ammonia-temperatureprogrammed desorption（NH_3-TPD） and hydrogen temperature-programmed reduction（H2-TPR）. The characterization results revealed that there was strongly synergistic effect between the oxidizability of CZCr species and the acidity of supports, which obviously promoted the catalytic activity for DCE degradation. 20% CZCr/HZSM-5 showed the highest activity and good durability during the long-term continuous test. The catalytic activity decreased in the order： 20%CZCr/HZSM-5〉CZCr〉20%CZCr/TiO_2〉20%CZCr/Al_2O_3〉20%CZCr/SiO_2.

Ni-Co bimetallic catalyst for CH_(4) reforming with CO_(2)

A co-precipitation method was employed to prepare Ni/Al_(2)O_(3)-ZrO_(2),Co/Al_(2)O_(3)-ZrO_(2)and Ni-Co/Al_(2)O_(3)-ZrO_(2)catalysts.Their properties were characterized by N_(2) adsorption(BET),thermogravimetric analysis(TGA),temperature-programmed reduction(TPR),temperature-programmed desorption(CO_(2)-TPD),and temperature-programmed surface reaction(CH_(4)-TPSR and CO_(2)-TPSR).Ni-Co/Al_(2)O_(3)-ZrO_(2)bimetallic catalyst has good performance in the reduction of active components Ni,Co and CO_(2)adsorption.Compared with mono-metallic catalyst,bimetallic catalyst could provide more active sites and CO_(2)adsorption sites(C+CO_(2)=2CO)for the methane-reforming reaction,and a more appropriate force formed between active components and composite support(SMSI)for the catalytic reaction.According to the CH_(4)-CO_(2)-TPSR,there were 80.9%and 81.5%higher CH_(4) and CO_(2)conversion over Ni-Co/Al_(2)O_(3)-ZrO_(2)catalyst,and its better resistance to carbon deposition,less than 0.5%of coke after 4 h reaction,was found by TGA.The high activity and excellent anti-coking of the Ni-Co/Al_(2)O_(3)-ZrO_(2)catalyst were closely related to the synergy between Ni and Co active metal,the strong metal-support interaction and the use of composite support.