With the progress of computer technology, CAD technique is urgent needed. In this paper, we conduct numerical and theoretical analysis and research on computer aided design technique and novel pattern for electronic a...With the progress of computer technology, CAD technique is urgent needed. In this paper, we conduct numerical and theoretical analysis and research on computer aided design technique and novel pattern for electronic architectural drawing and perspective. AUTOCAD drawing soRware because of its versatility and easy entry, in engineering has broad user base, but also because of the basis of general drawing software, often cannot directly use of the existing order efficiently complete professional drawing. We modify the current pattern and introduce our proposed pattern for advancement. The experiment proves the effectiveness of the pattern. In addition, we will conduct more insightful research in the future to nolish the current anoroach.展开更多
Aiming to increase the efficiency of gem design and manufacturing, a new method in computer-aided-design (CAD) of convex faceted gem cuts (CFGC) based on Half-edge data structure (HDS), including the algorithms for th...Aiming to increase the efficiency of gem design and manufacturing, a new method in computer-aided-design (CAD) of convex faceted gem cuts (CFGC) based on Half-edge data structure (HDS), including the algorithms for the implementation is presented in this work. By using object-oriented methods, geometrical elements of CFGC are classified and responding geometrical feature classes are established. Each class is implemented and embedded based on the gem process. Matrix arithmetic and analytical geometry are used to derive the affine transformation and the cutting algorithm. Based on the demand for a diversity of gem cuts, CAD functions both for free-style faceted cuts and parametric designs of typical cuts and visualization and human-computer interactions of the CAD system including two-dimensional and three-dimensional interactions have been realized which enhances the flexibility and universality of the CAD system. Furthermore, data in this CAD system can also be used directly by the gem CAM module, which will promote the gem CAD/CAM integration.展开更多
The general computer-aided design （CAD） software cannot meet the mould design requirement of the autoclave process for composites, because many parameters such as temperature and pressure should be considered in the...The general computer-aided design （CAD） software cannot meet the mould design requirement of the autoclave process for composites, because many parameters such as temperature and pressure should be considered in the mould design process, in addition to the material and geometry of the part. A framed-mould computer-aided design system （FMCAD） used in the autoclave moulding process is proposed in this paper. A function model of the software is presented, in which influence factors such as part structure, mould structure, and process parameters are considered; a design model of the software is established using object oriented （O-O） technology to integrate the stiffness calculation, temperature field calculation, and deformation field calculation of mould in the design, and in the design model, a hybrid model of mould based on calculation feature and form feature is presented to support those calculations. A prototype system is developed, in which a mould design process wizard is built to integrate the input information, calculation, analysis, data storage, display, and design results of mould design. Finally, three design examples are used to verify the prototype.展开更多
The finite element analysis and the optimum design of aluminum profile extrusion mould were investigated using the ANSYS software and its parameterized modeling method. The optimum dimensions of the mould were obtaine...The finite element analysis and the optimum design of aluminum profile extrusion mould were investigated using the ANSYS software and its parameterized modeling method. The optimum dimensions of the mould were obtained. It is found that the stress distribution is very uneven, and the stress convergence is rather severe in the bridge of the aluminum profile extrusion mould. The optimum height of the mould is 70.527 mm, and the optimum radius of dividing holes are 70.182 mm and 80.663 mm. Increasing the height of the mould in the range of 61.282 mm to 70.422 mm can prolong its longevity, but when the height is over 70.422 mm, its longevity reduces.展开更多
The improvement of machining behavior of prehardened-mould steel for plastic is realized by using computer-aided composition design in this work. The results showed that the matrix composition of large sectional preha...The improvement of machining behavior of prehardened-mould steel for plastic is realized by using computer-aided composition design in this work. The results showed that the matrix composition of large sectional prehardened mould steel for plastic markedly influences the precipitation of non-metallic inclusion and the control of composition aided by Thermo-Calc software package minimizes the amount of detrimental oxide inclusion. In addition the modification of calcium is optimized in the light of composition design.展开更多
Summary： Preoperative planning of corrective osteotomy with traditional radiography has limitations in regards to determining the ideal osteotomy location and orientation in three-dimensional femoral de- formities. T...Summary： Preoperative planning of corrective osteotomy with traditional radiography has limitations in regards to determining the ideal osteotomy location and orientation in three-dimensional femoral de- formities. Though a successful operation can be planned preoperatively, intraoperative contingencies might adhere to the procedural plan in the performance of operation. To efficiently perform a planned procedure, proposed is a design to implement three-dimensional reconstruction photography, based on computer-tomography （CT） scan. A custom-made guide was designed to navigate the osteotomy as planned, and additionally, a personalized intramedullary nail was used for fixation after osteotomy. Three-dimensional （3D） photography of deformed femur was established based on the CT dataset and transferred into 3D photography processing software for further planning. Osteotomy planes were de- signed and adjusted at deformity sites to correct the 3D deformities. The methodology of a custom-made osteotomy guide was introduced in femoral corrective osteotomy, for the first time, to navigate the op- eration as planned. After the virtual osteotomy and reduction of bone segments, the parameters of a custom-made intramedullary nail were measured for manufacturing. Findings Virtual operation in computer shows complete correction of the 3D deformity. The osteotomy guide, obtained by rapid-prototyping techniques, navigates mimicking surgery on rapid-prototyping model of the involved femur as planned. Internal fixation was achieved using the custom-made intramedullary nail. Interpreta- tion three-dimensional visualization introduces an advantage in preoperative planning for corrective os- teotomy of 3D femoral deformity, and the custom-made osteotomy guide is crucial to realize such a de- liberate plan during the actual procedures. The internal fixator, such as an intramedullary nail, can be modified or personalized for fixation in unique cases.展开更多
Objectives Renal replacement therapy(RRT)is increasingly adopted for critically ill patients diagnosed with acute kidney injury,but the optimal time for initiation remains unclear and prognosis is uncertain,leading to...Objectives Renal replacement therapy(RRT)is increasingly adopted for critically ill patients diagnosed with acute kidney injury,but the optimal time for initiation remains unclear and prognosis is uncertain,leading to medical complexity,ethical conflicts,and decision dilemmas in intensive care unit(ICU)settings.This study aimed to develop a decision aid(DA)for the family surrogate of critically ill patients to support their engagement in shared decision-making process with clinicians.Methods Development of DA employed a systematic process with user-centered design(UCD)principle,which included:(i)competitive analysis:searched,screened,and assessed the existing DAs to gather insights for design strategies,developmental techniques,and functionalities;(ii)user needs assessment:interviewed family surrogates in our hospital to explore target user group's decision-making experience and identify their unmet needs;(iii)evidence syntheses:integrate latest clinical evidence and pertinent information to inform the content development of DA.Results The competitive analysis included 16 relevant DAs,from which we derived valuable insights using existing resources.User decision needs were explored among a cohort of 15 family surrogates,revealing four thematic issues in decision-making,including stuck into dilemmas,sense of uncertainty,limited capacity,and delayed decision confirmation.A total of 27 articles were included for evidence syntheses.Relevant decision making knowledge on disease and treatment,as delineated in the literature sourced from decision support system or clinical guidelines,were formatted as the foundational knowledge base.Twenty-one items of evidence were extracted and integrated into the content panels of benefits and risks of RRT,possible outcomes,and reasons to choose.The DA was drafted into a web-based phototype using the elements of UCD.This platform could guide users in their preparation of decision-making through a sequential four-step process:identifying treatment options,weighing the benefits and risks,clarifying personal preferences and values,and formulating a schedule for formal shared decision-making with clinicians.Conclusions We developed a rapid prototype of DA tailored for family surrogate decision makers of critically ill patients in need of RRT in ICU setting.Future studies are needed to evaluate its usability,feasibility,and clinical effects of this intervention.展开更多
The paper gives a detail analysis on the necessity of rapid hydraulic support design, and presents a computer-aided rapid variant design system for hydraulic support. The system integrates the type selection and embod...The paper gives a detail analysis on the necessity of rapid hydraulic support design, and presents a computer-aided rapid variant design system for hydraulic support. The system integrates the type selection and embodiment design of hydraulic support. Case-based reasoning and rule-based reasoning are the main reasoning methods. Several crucial problems are discussed.展开更多
This paper proposes a new computer aided pattern design system(CAPDS)in which a uniformmathematical expression is used to construct different objects. In the geometric model, 3 B-splineis adopted as a line model. The ...This paper proposes a new computer aided pattern design system(CAPDS)in which a uniformmathematical expression is used to construct different objects. In the geometric model, 3 B-splineis adopted as a line model. The new system with uniform mathematical expression has the distin-guishing features: curve smoothness and fidelity, convenience to process graphic data in thedatabase and etc.. This paper presents the data structure, the program structure and also the implementation.展开更多
Suitable optimization and simulation were performed using a powerful software package with a mature database as well as modem measurement facilities, which led to the successful designing and manufacturing of advanced...Suitable optimization and simulation were performed using a powerful software package with a mature database as well as modem measurement facilities, which led to the successful designing and manufacturing of advanced steels. In the course of designing, the composition of a large section of prehardened mold steel for plastics was estimated so as to lower the quantities of oxide inclusions to change the type of carbides and to raise the machinability. The composition and process were adjusted to obtain satisfactory surface quality for the prevailing galvanization in transformation-induced plasticity （TRIP） steel. The refuting process of low-carbon steel was simulated in the light of both Thermo-Calc and Factsage. Thermodynamic and kinetic analyses were always conducted during the test and the procedure.展开更多
This paper describes a method of the computer aided garment design,and discusses 3-D humanbody,wire frame modelling,approaches of expressing and a shading model of the 3-D garment.
文摘With the progress of computer technology, CAD technique is urgent needed. In this paper, we conduct numerical and theoretical analysis and research on computer aided design technique and novel pattern for electronic architectural drawing and perspective. AUTOCAD drawing soRware because of its versatility and easy entry, in engineering has broad user base, but also because of the basis of general drawing software, often cannot directly use of the existing order efficiently complete professional drawing. We modify the current pattern and introduce our proposed pattern for advancement. The experiment proves the effectiveness of the pattern. In addition, we will conduct more insightful research in the future to nolish the current anoroach.
基金Supported by the National Natural Science Foundation of China(21576240)Experimental Technology Research Program of China University of Geosciences(Key Program)(SJ-201422)
文摘Aiming to increase the efficiency of gem design and manufacturing, a new method in computer-aided-design (CAD) of convex faceted gem cuts (CFGC) based on Half-edge data structure (HDS), including the algorithms for the implementation is presented in this work. By using object-oriented methods, geometrical elements of CFGC are classified and responding geometrical feature classes are established. Each class is implemented and embedded based on the gem process. Matrix arithmetic and analytical geometry are used to derive the affine transformation and the cutting algorithm. Based on the demand for a diversity of gem cuts, CAD functions both for free-style faceted cuts and parametric designs of typical cuts and visualization and human-computer interactions of the CAD system including two-dimensional and three-dimensional interactions have been realized which enhances the flexibility and universality of the CAD system. Furthermore, data in this CAD system can also be used directly by the gem CAM module, which will promote the gem CAD/CAM integration.
文摘The general computer-aided design （CAD） software cannot meet the mould design requirement of the autoclave process for composites, because many parameters such as temperature and pressure should be considered in the mould design process, in addition to the material and geometry of the part. A framed-mould computer-aided design system （FMCAD） used in the autoclave moulding process is proposed in this paper. A function model of the software is presented, in which influence factors such as part structure, mould structure, and process parameters are considered; a design model of the software is established using object oriented （O-O） technology to integrate the stiffness calculation, temperature field calculation, and deformation field calculation of mould in the design, and in the design model, a hybrid model of mould based on calculation feature and form feature is presented to support those calculations. A prototype system is developed, in which a mould design process wizard is built to integrate the input information, calculation, analysis, data storage, display, and design results of mould design. Finally, three design examples are used to verify the prototype.
文摘The finite element analysis and the optimum design of aluminum profile extrusion mould were investigated using the ANSYS software and its parameterized modeling method. The optimum dimensions of the mould were obtained. It is found that the stress distribution is very uneven, and the stress convergence is rather severe in the bridge of the aluminum profile extrusion mould. The optimum height of the mould is 70.527 mm, and the optimum radius of dividing holes are 70.182 mm and 80.663 mm. Increasing the height of the mould in the range of 61.282 mm to 70.422 mm can prolong its longevity, but when the height is over 70.422 mm, its longevity reduces.
文摘The improvement of machining behavior of prehardened-mould steel for plastic is realized by using computer-aided composition design in this work. The results showed that the matrix composition of large sectional prehardened mould steel for plastic markedly influences the precipitation of non-metallic inclusion and the control of composition aided by Thermo-Calc software package minimizes the amount of detrimental oxide inclusion. In addition the modification of calcium is optimized in the light of composition design.
基金supported by grants from the National Natural Science Foundation of China (No. 81141022)the General Hospital of Chinese Liberation Army (No. 10KMM09)
文摘Summary： Preoperative planning of corrective osteotomy with traditional radiography has limitations in regards to determining the ideal osteotomy location and orientation in three-dimensional femoral de- formities. Though a successful operation can be planned preoperatively, intraoperative contingencies might adhere to the procedural plan in the performance of operation. To efficiently perform a planned procedure, proposed is a design to implement three-dimensional reconstruction photography, based on computer-tomography （CT） scan. A custom-made guide was designed to navigate the osteotomy as planned, and additionally, a personalized intramedullary nail was used for fixation after osteotomy. Three-dimensional （3D） photography of deformed femur was established based on the CT dataset and transferred into 3D photography processing software for further planning. Osteotomy planes were de- signed and adjusted at deformity sites to correct the 3D deformities. The methodology of a custom-made osteotomy guide was introduced in femoral corrective osteotomy, for the first time, to navigate the op- eration as planned. After the virtual osteotomy and reduction of bone segments, the parameters of a custom-made intramedullary nail were measured for manufacturing. Findings Virtual operation in computer shows complete correction of the 3D deformity. The osteotomy guide, obtained by rapid-prototyping techniques, navigates mimicking surgery on rapid-prototyping model of the involved femur as planned. Internal fixation was achieved using the custom-made intramedullary nail. Interpreta- tion three-dimensional visualization introduces an advantage in preoperative planning for corrective os- teotomy of 3D femoral deformity, and the custom-made osteotomy guide is crucial to realize such a de- liberate plan during the actual procedures. The internal fixator, such as an intramedullary nail, can be modified or personalized for fixation in unique cases.
文摘Objectives Renal replacement therapy(RRT)is increasingly adopted for critically ill patients diagnosed with acute kidney injury,but the optimal time for initiation remains unclear and prognosis is uncertain,leading to medical complexity,ethical conflicts,and decision dilemmas in intensive care unit(ICU)settings.This study aimed to develop a decision aid(DA)for the family surrogate of critically ill patients to support their engagement in shared decision-making process with clinicians.Methods Development of DA employed a systematic process with user-centered design(UCD)principle,which included:(i)competitive analysis:searched,screened,and assessed the existing DAs to gather insights for design strategies,developmental techniques,and functionalities;(ii)user needs assessment:interviewed family surrogates in our hospital to explore target user group's decision-making experience and identify their unmet needs;(iii)evidence syntheses:integrate latest clinical evidence and pertinent information to inform the content development of DA.Results The competitive analysis included 16 relevant DAs,from which we derived valuable insights using existing resources.User decision needs were explored among a cohort of 15 family surrogates,revealing four thematic issues in decision-making,including stuck into dilemmas,sense of uncertainty,limited capacity,and delayed decision confirmation.A total of 27 articles were included for evidence syntheses.Relevant decision making knowledge on disease and treatment,as delineated in the literature sourced from decision support system or clinical guidelines,were formatted as the foundational knowledge base.Twenty-one items of evidence were extracted and integrated into the content panels of benefits and risks of RRT,possible outcomes,and reasons to choose.The DA was drafted into a web-based phototype using the elements of UCD.This platform could guide users in their preparation of decision-making through a sequential four-step process:identifying treatment options,weighing the benefits and risks,clarifying personal preferences and values,and formulating a schedule for formal shared decision-making with clinicians.Conclusions We developed a rapid prototype of DA tailored for family surrogate decision makers of critically ill patients in need of RRT in ICU setting.Future studies are needed to evaluate its usability,feasibility,and clinical effects of this intervention.
文摘The paper gives a detail analysis on the necessity of rapid hydraulic support design, and presents a computer-aided rapid variant design system for hydraulic support. The system integrates the type selection and embodiment design of hydraulic support. Case-based reasoning and rule-based reasoning are the main reasoning methods. Several crucial problems are discussed.
文摘This paper proposes a new computer aided pattern design system(CAPDS)in which a uniformmathematical expression is used to construct different objects. In the geometric model, 3 B-splineis adopted as a line model. The new system with uniform mathematical expression has the distin-guishing features: curve smoothness and fidelity, convenience to process graphic data in thedatabase and etc.. This paper presents the data structure, the program structure and also the implementation.
基金The study was financially supported by the key project of Science and Technology Commission of Shanghai Local Gov-ernment (No. 015211010), the National Natural Science Foundation of China (No. 50171038) and the China-Belgium bi-lateral project (No. 2001-242).
文摘Suitable optimization and simulation were performed using a powerful software package with a mature database as well as modem measurement facilities, which led to the successful designing and manufacturing of advanced steels. In the course of designing, the composition of a large section of prehardened mold steel for plastics was estimated so as to lower the quantities of oxide inclusions to change the type of carbides and to raise the machinability. The composition and process were adjusted to obtain satisfactory surface quality for the prevailing galvanization in transformation-induced plasticity （TRIP） steel. The refuting process of low-carbon steel was simulated in the light of both Thermo-Calc and Factsage. Thermodynamic and kinetic analyses were always conducted during the test and the procedure.
文摘This paper describes a method of the computer aided garment design,and discusses 3-D humanbody,wire frame modelling,approaches of expressing and a shading model of the 3-D garment.
