The finite element analysis and the optimum design of aluminum profile extrusion mould were investigated using the ANSYS software and its parameterized modeling method. The optimum dimensions of the mould were obtaine...The finite element analysis and the optimum design of aluminum profile extrusion mould were investigated using the ANSYS software and its parameterized modeling method. The optimum dimensions of the mould were obtained. It is found that the stress distribution is very uneven, and the stress convergence is rather severe in the bridge of the aluminum profile extrusion mould. The optimum height of the mould is 70.527 mm, and the optimum radius of dividing holes are 70.182 mm and 80.663 mm. Increasing the height of the mould in the range of 61.282 mm to 70.422 mm can prolong its longevity, but when the height is over 70.422 mm, its longevity reduces.展开更多
With the progress of computer technology, CAD technique is urgent needed. In this paper, we conduct numerical and theoretical analysis and research on computer aided design technique and novel pattern for electronic a...With the progress of computer technology, CAD technique is urgent needed. In this paper, we conduct numerical and theoretical analysis and research on computer aided design technique and novel pattern for electronic architectural drawing and perspective. AUTOCAD drawing soRware because of its versatility and easy entry, in engineering has broad user base, but also because of the basis of general drawing software, often cannot directly use of the existing order efficiently complete professional drawing. We modify the current pattern and introduce our proposed pattern for advancement. The experiment proves the effectiveness of the pattern. In addition, we will conduct more insightful research in the future to nolish the current anoroach.展开更多
Aiming to increase the efficiency of gem design and manufacturing, a new method in computer-aided-design (CAD) of convex faceted gem cuts (CFGC) based on Half-edge data structure (HDS), including the algorithms for th...Aiming to increase the efficiency of gem design and manufacturing, a new method in computer-aided-design (CAD) of convex faceted gem cuts (CFGC) based on Half-edge data structure (HDS), including the algorithms for the implementation is presented in this work. By using object-oriented methods, geometrical elements of CFGC are classified and responding geometrical feature classes are established. Each class is implemented and embedded based on the gem process. Matrix arithmetic and analytical geometry are used to derive the affine transformation and the cutting algorithm. Based on the demand for a diversity of gem cuts, CAD functions both for free-style faceted cuts and parametric designs of typical cuts and visualization and human-computer interactions of the CAD system including two-dimensional and three-dimensional interactions have been realized which enhances the flexibility and universality of the CAD system. Furthermore, data in this CAD system can also be used directly by the gem CAM module, which will promote the gem CAD/CAM integration.展开更多
The general computer-aided design （CAD） software cannot meet the mould design requirement of the autoclave process for composites, because many parameters such as temperature and pressure should be considered in the...The general computer-aided design （CAD） software cannot meet the mould design requirement of the autoclave process for composites, because many parameters such as temperature and pressure should be considered in the mould design process, in addition to the material and geometry of the part. A framed-mould computer-aided design system （FMCAD） used in the autoclave moulding process is proposed in this paper. A function model of the software is presented, in which influence factors such as part structure, mould structure, and process parameters are considered; a design model of the software is established using object oriented （O-O） technology to integrate the stiffness calculation, temperature field calculation, and deformation field calculation of mould in the design, and in the design model, a hybrid model of mould based on calculation feature and form feature is presented to support those calculations. A prototype system is developed, in which a mould design process wizard is built to integrate the input information, calculation, analysis, data storage, display, and design results of mould design. Finally, three design examples are used to verify the prototype.展开更多
文摘The finite element analysis and the optimum design of aluminum profile extrusion mould were investigated using the ANSYS software and its parameterized modeling method. The optimum dimensions of the mould were obtained. It is found that the stress distribution is very uneven, and the stress convergence is rather severe in the bridge of the aluminum profile extrusion mould. The optimum height of the mould is 70.527 mm, and the optimum radius of dividing holes are 70.182 mm and 80.663 mm. Increasing the height of the mould in the range of 61.282 mm to 70.422 mm can prolong its longevity, but when the height is over 70.422 mm, its longevity reduces.
文摘With the progress of computer technology, CAD technique is urgent needed. In this paper, we conduct numerical and theoretical analysis and research on computer aided design technique and novel pattern for electronic architectural drawing and perspective. AUTOCAD drawing soRware because of its versatility and easy entry, in engineering has broad user base, but also because of the basis of general drawing software, often cannot directly use of the existing order efficiently complete professional drawing. We modify the current pattern and introduce our proposed pattern for advancement. The experiment proves the effectiveness of the pattern. In addition, we will conduct more insightful research in the future to nolish the current anoroach.
基金Supported by the National Natural Science Foundation of China(21576240)Experimental Technology Research Program of China University of Geosciences(Key Program)(SJ-201422)
文摘Aiming to increase the efficiency of gem design and manufacturing, a new method in computer-aided-design (CAD) of convex faceted gem cuts (CFGC) based on Half-edge data structure (HDS), including the algorithms for the implementation is presented in this work. By using object-oriented methods, geometrical elements of CFGC are classified and responding geometrical feature classes are established. Each class is implemented and embedded based on the gem process. Matrix arithmetic and analytical geometry are used to derive the affine transformation and the cutting algorithm. Based on the demand for a diversity of gem cuts, CAD functions both for free-style faceted cuts and parametric designs of typical cuts and visualization and human-computer interactions of the CAD system including two-dimensional and three-dimensional interactions have been realized which enhances the flexibility and universality of the CAD system. Furthermore, data in this CAD system can also be used directly by the gem CAM module, which will promote the gem CAD/CAM integration.
文摘The general computer-aided design （CAD） software cannot meet the mould design requirement of the autoclave process for composites, because many parameters such as temperature and pressure should be considered in the mould design process, in addition to the material and geometry of the part. A framed-mould computer-aided design system （FMCAD） used in the autoclave moulding process is proposed in this paper. A function model of the software is presented, in which influence factors such as part structure, mould structure, and process parameters are considered; a design model of the software is established using object oriented （O-O） technology to integrate the stiffness calculation, temperature field calculation, and deformation field calculation of mould in the design, and in the design model, a hybrid model of mould based on calculation feature and form feature is presented to support those calculations. A prototype system is developed, in which a mould design process wizard is built to integrate the input information, calculation, analysis, data storage, display, and design results of mould design. Finally, three design examples are used to verify the prototype.
