Comparison of Collocation of Solar Concentrators with Bean Fields in Mexico and Potato Fields in Canada and Micromechanical Equipment for Their Production

There is an increased interest in renewable forms of energy across the world,with solar energy being one of the most promising forms.Over the last couple of years,we have developed the MET(MicroEquipment Technology).As an application of the MET,we selected the task of production of solar concentrators.Different types of solar concentrators with flat mirrors were developed and prototypes of these solar concentrators(approximately 1 m in diameter)were made.The proposed solar concentrators were developed on the basis of concentrators patented in Mexico,Spain,and USA.It may be possible to install these concentrators on horizontal roofs of buildings.However,installing them on agricultural fields has become the new trend.As an example,we propose to use them in the potato fields in Canada to obtain dual advantages such as for electrical energy generation and for the minimal loss of agricultural harvest.The second example was analyzed for bean fields,in Mexico.In this paper,we describe the main results in regard to microequipment development for solar concentrator production,several prototypes of solar concentrators with flat mirrors and their co-location and agricultural fields.

Application of millimeter-sized polymer cylindrical lens array concentrators in solar cells

A unique method is proposed to encapsulate solar cells and improve their power conversion efficiency by using a millimeter-sized cylindrical lens array concentrator. Millimeter-sized epoxy resin polymer（ERP） cylindrical lens array concentrators are fabricated by the soft imprint technique based on polydimethylsiloxane stamps. The photovoltaic measurements show that millimeter-sized ERP cylindrical lens array concentrators can considerably improve the power conversion efficiency of silicon solar cells. The validity of the proposed method is proved by the coupled optical and electrical simulations. The designed solar cell devices with the advantages of high-efficiency and convenient cleaning are very useful in practical applications.

Characteristics and Energy Efficiency of the Industrial Concentrators with Thermocompression

An analysis of the thermal characteristics of the industrial thermocompression heat pump systems is presented in this paper By using thermocompression, waste heat is thermotransformed to a higher temperature level to be convenient for its usage in thermal processes. The thermocompression heat pumps can be optimally applied in various industrial plants （production of fruit, grape and tomato concentrates, in beer, sugar and dairy industries, in chemical and pharmaceutical industries etc.）. The range of optimal application of the turbo compressor, screw compressor and ejector thermocompression is estimated. The complex thermal and flow phenomena in the processes of thermocompression, evaporation and condensation are discussed. The theoretical and experimental results of the investigations on the experimental grape vacuum concentrator and on the industrial NaOH concentrator are presented. A significant increment of the energy efficiency can be achieved by optimal application of the thermocompression in the thermal concentrating processes. A significant feature and great advantage of the concentrating technology with thermocompression are a possibility for realization of the low temperature concentrating processes, which is very important for the quality of many concentrating products with high energy efficiency technology.

Test Standards for Direct Steam Generating Solar Concentrators

There are a few standards reported in the literature for testing and evaluation of thermal performance of solar concentrators based on sensible heating of working fluid. The preceding standard measures only the cooking efficiency and cooking capacity. Apart from thermal efficiency, there is an imperative need for other important parameters of the solar concentrators such as its stagnation temperature, cooking capacity, cost per watts delivered, weight of the cooker, ease of handling and aesthetics. The characterization of a concentrator at its operating temperature settles appropriate size and type of concentrator for any thermal application. The performance test is conducted at Chandwad (20.3292°N, 74.2444°E), Maharashtra and the proposed protocol aims for evaluation of thermal performance of solar cooking system and standardization of reporting the test results so that anyone can easily recognize and use it.

Combinations of Solar Concentrators with Agricultural Plants

A new trend involving the combination of solar concentrators and agricultural plants on the same piece of land offers the possibility of realizing both electricity generation and a good crop harvest.Authors analyze this situation for different countries,including Mexico,and based on authors’experience regarding the development of new solar concentrator prototypes,authors’primary objective was to describe the development of compact,light,and inexpensive solar concentrator prototypes that can be collocated on horizontal roofs.Authors’second objective was to investigate the combination of such solar concentrator prototypes with agricultural plants on the same field.Thus,several studies related to the combination of renewable energy generation and agricultural crops were reviewed.Many such systems involving the combination of PV(Photovoltaic)panels with different types of vegetables exist in the USA,France(lettuce production),Japan(tomato production),India(aloe and corn),northern Italy(maize),Spain and México.

Solid superacid catalysts promote high-performance carbon dots with narrow-band fluorescence emission for luminescence solar concentrators

Facile and efficient method for constructing carbon dots(CDs)with narrow full width at half maximum(FWHM)is a major challenge in the field,and researches on regulating the FWHM of CDs are also rare and scarce.In this work,we delved into the synthesis of CDs with narrow fluorescence emission FWHM(NFEF-CDs)in the m-phenylenediamine(m-PD)/ethanol system,utilizing solid superacid resin as cata-lyst with solvothermal method.The resulting NFEF-CDs exhibit a photoluminescent(PL)emission peak at 521 nm with a narrow FWHM of 41 nm,an absolute PL quantum yield(QY)of 80%,and display excitation-independent PL behavior.Through comprehensive characterization,we identified the protonation of edge amino on NFEF-CDs as the key factor in achieving the narrow FWHM.Subsequently,we validated the broad applicability of solid superacid resins as catalysts for synthesizing CDs with narrow FWHM in the m-PD/ethanol system.Finally,we utilized a self-leveling method to prepare NFEF-CDs film on the surface of poly(methyl methacrylate)(PMMA)substrate and investigated the solid-state fluorescence properties of NFEF-CDs as well as their performance as luminescence solar concentrator(LSC)for photovoltaic conver-sion.The results revealed that the as-prepared LSC exhibit an internal quantum efficiency(η_(int))of 42.39%and an optical efficiency(η_(opt))of 0.68%.These findings demonstrate the promising prospects of NFEF-CDs in the field of LSCs and provide a theoretical basis for their application in photovoltaic conversion.

Charting the course to solid-state dual-ion batteries

An electrolyte destined for use in a dual-ion battery(DIB)must be stable at the inherently high potential required for anion intercalation in the graphite electrode,while also protecting the Al current collector from anodic dissolution.A higher salt concentration is needed in the electrolyte,in comparison to typical battery electrolytes,to maximize energy density,while ensuring acceptable ionic conductivity and operational safety.In recent years,studies have demonstrated that highly concentrated organic electrolytes,ionic liquids,gel polymer electrolytes(GPEs),ionogels,and water-in-salt electrolytes can potentially be used in DIBs.GPEs can help reduce the use of solvents and thus lead to a substantial change in the Coulombic efficiency,energy density,and long-term cycle life of DIBs.Furthermore,GPEs are suited to manufacture compact DIB designs without separators by virtue of their mechanical strength and electrical performance.In this review,we highlight the latest advances in the application of different electrolytes in DIBs,with particular emphasis on GPEs.

Dynamics and genetic regulation of macronutrient concentrations during grain development in maize

Nitrogen(N), phosphorus(P), and potassium(K) are essential macronutrients that are crucial not only for maize growth and development, but also for crop yield and quality. The genetic basis of macronutrient dynamics and accumulation during grain filling in maize remains largely unknown. In this study, we evaluated grain N, P, and K concentrations in 206 recombinant inbred lines generated from a cross of DH1M and T877 at six time points after pollination. We then calculated conditional phenotypic values at different time intervals to explore the dynamic characteristics of the N, P, and K concentrations. Abundant phenotypic variations were observed in the concentrations and net changes of these nutrients. Unconditional quantitative trait locus(QTL) mapping revealed 41 non-redundant QTLs, including 17, 16, and 14 for the N, P, and K concentrations, respectively. Conditional QTL mapping uncovered 39 non-redundant QTLs related to net changes in the N, P, and K concentrations. By combining QTL, gene expression, co-expression analysis, and comparative genomic data, we identified 44, 36, and 44 candidate genes for the N, P, and K concentrations, respectively, including GRMZM2G371058 encoding a Doftype zinc finger DNA-binding family protein, which was associated with the N concentration, and GRMZM2G113967encoding a CBL-interacting protein kinase, which was related to the K concentration. The results deepen our understanding of the genetic factors controlling N, P, and K accumulation during maize grain development and provide valuable genes for the genetic improvement of nutrient concentrations in maize.

Rheological properties and concentration evolution of thickened tailings under the coupling effect of compression and shear

Cemented paste backfill(CPB)is a key technology for green mining in metal mines,in which tailings thickening comprises the primary link of CPB technology.However,difficult flocculation and substandard concentrations of thickened tailings often occur.The rheological properties and concentration evolution in the thickened tailings remain unclear.Moreover,traditional indoor thickening experiments have yet to quantitatively characterize their rheological properties.An experiment of flocculation condition optimization based on the Box-Behnken design(BBD)was performed in the study,and the two response values were investigated:concentration and the mean weighted chord length(MWCL)of flocs.Thus,optimal flocculation conditions were obtained.In addition,the rheological properties and concentration evolution of different flocculant dosages and ultrafine tailing contents under shear,compression,and compression-shear coupling experimental conditions were tested and compared.The results show that the shear yield stress under compression and compression-shear coupling increases with the growth of compressive yield stress,while the shear yield stress increases slightly under shear.The order of shear yield stress from low to high under different thickening conditions is shear,compression,and compression-shear coupling.Under compression and compression-shear coupling,the concentration first rapidly increases with the growth of compressive yield stress and then slowly increases,while concentration increases slightly under shear.The order of concentration from low to high under different thickening conditions is shear,compression,and compression-shear coupling.Finally,the evolution mechanism of the flocs and drainage channels during the thickening of the thickened tailings under different experimental conditions was revealed.

Solar spectral conversion based on plastic films of lanthanide-doped ionosilicas for photovoltaics:Down-shifting layers and luminescent solar concentrators

The mismatch between the photovoltaic(PV)cells absorption and the solar irradiance on earth is one of the major limitations towards more efficient PV energy conversion.This aspect was addressed by downshifting the solar irradiance on Earth through luminescent down-shifting layers based on lanthanidedoped surface-functionalized ionosilicas(ISs)embedded in poly(methyl methacrylate)(PMMA)coated on the surface of commercial Si-based PV cells.The IS-PMMA hybrid materials exhibit efficient solar radiation harvesting(spectral overlap of^9.5×10^19 photons/(s·m2))and conversion(quantum yield^52%).The direct solar radiation and the down-shifted radiation are partially guided and lost through total internal reflection to the layer edges being unavailable for PV conversion of the coated PV cell.By tuning the down-shifting layer thickness,it also acts as luminescent solar concentrator enabling the collection of the guided radiation by flexible PV cells applied on the borders of the down-shifting layer leading to an enhancement of the PV energy conversion from^5%(in the case of the single-use of the luminescent down-shifting layer)to^13%comparing with the bare PV cell.The overall electrical output of the device resulted in an absolute external quantum efficiency increase of^32%for the optimized Eu^3+-based films in the UV spectral region(compared with the bare PV device,which is among the best values reported so far).

Efficient desorption and reuse of collector from the flotation concentrate:A case study of scheelite

Flotation is the most common method to obtain concentrate through the selective adsorption of collectors on target minerals to make them hydrophobic and floatable.In the hydrometallurgy of concentrate,collectors adsorbed on concentrate can damage ion-exchange resin and increase the chemical oxygen demand(COD)value of wastewater.In this work,we proposed a new scheme,i.e.,desorbing the collectors from concentrate in ore dressing plant and reusing them in flotation flowsheet.Lead nitrate and benzohydroxamic acid(Pb-BHA)complex is a common collector in scheelite flotation.In this study,different physical(stirring or ultrasonic waves)and chemical(strong acid or alkali environment)methods for facilitating the desorption of Pb-BHA collector from scheelite concentrate were explored.Single-mineral desorption tests showed that under the condition of pulp pH 13 and ultrasonic treatment for 15 min,the highest desorption rates of Pb and BHA from the scheelite concentrate were 90.48%and 63.75%,respectively.Run-of-mine ore flotation tests revealed that the reuse of desorbed Pb and BHA reduced the collector dosage by 30%for BHA and 25%for Pb.The strong alkali environment broke the chemical bonds between Pb and BHA.The cavitation effect of ultrasonic waves effectively reduced the interaction intensity between Pb-BHA collector and scheelite surfaces.This method combining ultrasonic waves and strong alkali environment can effectively desorb the collectors from concentrate and provide“clean”scheelite concentrate for metallurgic plants;the reuse of desorbed collector in flotation flowsheet can reduce reagent cost for ore dressing plants.

Features of rare earth elements geochemistry in coals of Central Kazakhstan

This research presents the results of a comprehensive study of mineralogical and geochemical features of REE distribution in coals of Central Kazakhstan deposits—Karaganda coal basin and Shubarkol deposit,which have large hard coal reserves and are industrially important for the coal industry of Kazakhstan;the research is based on 205 samples of clayey interlayers and coal seams.It shows basic patterns of distribution and features of concentration for impurity elements,gives an estimate of the impurity elements concentration,including REE,defines conditions and factors of their accumulation,and studies features of their forms in coal and coal-bearing rocks,which allows estimating the mechanisms of their migration and conditions of accumulation.According to the results of geochemical indicators,the article establishes the factors of REE dislocation,reveals the composition of margin rocks that have influenced REE concentration in coal seams,and the presented latest data on mineralogy allowed to establish the ways of their transportation to the paleobasin during the synand epigenetic periods of formation of the coal deposits of Central Kazakhstan being researched.It was found that the coals are insignificantly enriched with heavy lanthanides from Ho to Lu.The distribution curves of UCC normalized REE values in the coals are similar and coincide,but they are less than the average value for world coal,and amount to only one-third of the UCC.It was found that the highest concentrations of all REE are characteristic of clayey interlayers and oxidized coals.The La/Yb ratio in this case increases upwards along the section,indicating mainly clastogenic mechanism of REE delivery to the coals.In coal and clay samples,the predominant mineral form of REE is light lanthanide phosphates.Identified particles of REE from minerals and their composition peculiarities suppose autigene nature of their formation.The formation of the bulk of autigene minerals occurred during the maturation of brown coals and their transformation into hard ones.

Failure Analysis of Dissimilar Metal Welds between Ferritic Heat Resistant Steels and Austenitic Stainless Steels in Power Plant

This study analysed the failure of dissimilar metal welds(DMWs)between ferritic heat resistant steels and austenitic stainless steels and investigated its influencing factors by means of numerical simulation,microstructure characterization and mechanical property test.Under the long-term high-temperature service condition in practical power plant,the DMW failure mode was along the interface between nickel-based weld metal(WM)and ferritic heat resistant steel,and the failure mechanism was stress/strain concentration,microstructure degradation and oxidation coupling acting on the interface.The numerical simulation results show that interface stress/strain concentration was due to the differences in coefficient of thermal expansion and creep strength,and the degree of stress/strain concentration was related to service time.The ferrite band formed at the WM/ferritic steel interface was prone to cracking,attracting the fracture along the interface.The interface crack allowed oxidation to develop along the WM/ferritic steel interface.During long-term service,the interface stress/strain concentration,microstructure and oxidation all evolved,which synergistically promoted interface failure of DMW.However,only under the long-term service of low stress conditions could trigger the interface failure of DMW.Meanwhile,long-term service would reduce the mechanical strength and plasticity of DMW.

Achievable hole concentration at room temperature as a function of Mg concentration for MOCVD-grown p-GaN after sufficient annealing

Relationship between the hole concentration at room temperature and the Mg doping concentration in p-GaN grown by MOCVD after sufficient annealing was studied in this paper.Different annealing conditions were applied to obtain sufficient activation for p-GaN samples with different Mg doping ranges.Hole concentration,resistivity and mobility were characterized by room-temperature Hall measurements.The Mg doping concentration and the residual impurities such as H,C,O and Si were measured by secondary ion mass spectroscopy,confirming negligible compensations by the impurities.The hole concentration,resistivity and mobility data are presented as a function of Mg concentration,and are compared with literature data.The appropriate curve relating the Mg doping concentration to the hole concentration is derived using a charge neutrality equation and the ionized-acceptor-density[N-(A)^(-)](cm^(−3))dependent ionization energy of Mg acceptor was determined asE_(A)^(Mg)=184−2.66×10^(−5)×[N_(A)^(-)]1/3 meV.

New process for treating boron-bearing iron ore by flash reduction coupled with magnetic separation

Boron is an important industrial raw material often sourced from minerals containing different compounds that cocrystallize,which makes it difficult to separate the mineral phases through conventional beneficiation.This study proposed a new treatment called flash reduction-melting separation(FRMS)for boron-bearing iron concentrates.In this method,the concentrates were first flash-reduced at the temperature under which the particles melt,and the slag and the reduced iron phases disengaged at the particle scale.Good reduc-tion and melting effects were achieved above 1550℃.The B_(2)O_(3) content in the separated slag was over 18wt%,and the B content in the iron was less than 0.03wt%.The proposed FRMS method was tested to investigate the effects of factors such as ore particle size and tem-perature on the reduction and melting steps with and without pre-reducing the raw concentrate.The mineral phase transformation and morphology evolution in the ore particles during FRMS were also comprehensively analyzed.

Solar fuel production through concentrating light irradiation

The climate crisis necessitates the development of non-fossil energy sources.Harnessing solar energy for fuel production shows promise and offers the potential to utilize existing energy infrastructure.However,solar fuel production is in its early stages of development,constrained by low conversion efficiency and challenges in scaling up production.Concentrated solar energy(CSE)technology has matured alongside the rapid growth of solar thermal power plants.This review provides an overview of current CSE methods and solar fuel production,analyzes their integration compatibility,and delves into the theoretical mechanisms by which CSE impacts solar energy conversion efficiency and product selectivity in the context of photo-electrochemistry,thermochemistry,and photo-thermal co-catalysis for solar fuel production.The review also summarizes approaches to studying the photoelectric and photothermal effects of CSE.Lastly,it explores emerging novel CSE technology methods in the field of solar fuel production.

Long-term operation optimization of circulating cooling water systems under fouling conditions

Fouling caused by excess metal ions in hard water can negatively impact the performance of the circulating cooling water system(CCWS)by depositing ions on the heat exchanger's surface.Currently,the operation optimization of CCWS often prioritizes short-term flow velocity optimization for minimizing power consumption,without considering fouling.However,low flow velocity promotes fouling.Therefore,it's crucial to balance fouling and energy/water conservation for optimal CCWS long-term operation.This study proposes a mixed-integer nonlinear programming(MINLP)model to achieve this goal.The model considers fouling in the pipeline,dynamic concentration cycle,and variable frequency drive to optimize the synergy between heat transfer,pressure drop,and fouling.By optimizing the concentration cycle of the CCWS,water conservation and fouling control can be achieved.The model can obtain the optimal operating parameters for different operation intervals,including the number of pumps,frequency,and valve local resistance coefficient.Sensitivity experiments on cycle and environmental temperature reveal that as the cycle increases,the marginal benefits of energy/water conservation decrease.In periods with minimal impact on fouling rate,energy/water conservation can be achieved by increasing the cycle while maintaining a low fouling rate.Overall,the proposed model has significant energy/water saving effects and can comprehensively optimize the CCWS through its incorporation of fouling and cycle optimization.

MINIMIZERS OF L^(2)-SUBCRITICAL VARIATIONAL PROBLEMS WITH SPATIALLY DECAYING NONLINEARITIES IN BOUNDED DOMAINS

This paper is concerned with the minimizers of L^(2)-subcritical constraint variar tional problems with spatially decaying nonlinearities in a bounded domain Ω of R~N(N≥1).We prove that the problem admits minimizers for any M> 0.Moreover,the limiting behavior of minimizers as M→∞ is also analyzed rigorously.

Physical mechanism of secondary-electron emission in Si wafers

CMOS-compatible RF/microwave devices,such as filters and amplifiers,have been widely used in wireless communication systems.However,secondary-electron emission phenomena often occur in RF/microwave devices based on silicon(Si)wafers,especially in the high-frequency range.In this paper,we have studied the major factors that influence the secondary-electron yield(SEY)in commercial Si wafers with different doping concentrations.We show that the SEY is suppressed as the doping concentration increases,corresponding to a relatively short effective escape depthλ.Meanwhile,the reduced narrow band gap is beneficial in suppressing the SEY,in which the absence of a shallow energy band below the conduction band will easily capture electrons,as revealed by first-principles calculations.Thus,the new physical mechanism combined with the effective escape depth and band gap can provide useful guidance for the design of integrated RF/microwave devices based on Si wafers.

Identifying the Hydrochemical Characteristics,Genetic Mechanisms and Potential Human Health Risks of Fluoride and Nitrate Enriched Groundwater in the Tongzhou District,Beijing,North China

Fluoride and nitrate enriched groundwater are potential threats to the safety of the groundwater supply that may cause significant effects on human health and public safety,especially in aggregated population areas and economic hubs.This study focuses on the high F^(−)and NO_(3)^(−)concentration groundwater in Tongzhou District,Beijing,North China.A total of 36 groundwater samples were collected to analyze the hydrochemical characteristics,elucidate genetic mechanisms and evaluate the potential human health risks.The results of the analysis indicate:Firstly,most of the groundwater samples are characterized by Mg-HCO_(3) and Na-HCO_(3) with the pH ranging from 7.19 to 8.28 and TDS with a large variation across the range 471-2337 mg/L.The NO_(3)^(−)concentration in 38.89%groundwater samples and the F^(−)concentration in 66.67%groundwater samples exceed the permissible limited value.Secondly,F^(−)in groundwater originates predominantly from water-rock interactions and the fluorite dissolution,which is also regulated by cation exchange,competitive adsorption of HCO_(3)−and an alkaline environment.Thirdly,the effect of sewage disposal and agricultural activities have a significant effect on high NO3-concentration,while the high F^(−)concentration is less influenced by anthropogenic activity.The alkaline environment favors nitrification,thus being conducive to the production of NO_(3)^(−).Finally,the health risk assessment is evaluated for different population groups.The results indicate that high NO_(3)^(−)and F^(−)concentration in groundwater would have the largest threat to children’s health.The findings of this study could contribute to the provision of a scientific basis for groundwater supply policy formulation relating to public health in Tongzhou District.