Constraining Equation of State of Dark Matter:Including Weak Gravitational Lensing

Usually the equation of state （EoS） of dark matter is zero when it is cold, however there exists the possibility of a （effective） nonzero EoS of dark matter due to its decay and interaction with dark energy. In this work, we try to constrain the EoS of dark matter/JAdm using the currently available cosmic observations which include the geometrical and dynamical measurements. For the geometrical measurements, the luminosity distance of type Ia supernovae, the angular diameter distance and comoving sound horizon from baryon acoustic oscillations and the cosmic microwave background radiation will be employed. The data points from the redshift-space distortion and weak gravitational lensing will be taken as dynamical measurements. Using the Markov chain Monte Carlomethod, we obtain a very tight constraint on the-EoS of dark matter：wdm=0.0000532 ＋0.000692＋0.00136＋0.00183 -0.000686-0.00136-0.00177.

Constraining the Generalized and Superfluid Chaplygin Gas Models with the Sandage-Loeb Test

The Sandage Loeb （SL） test is a direct measurement of the cosmic expansion by probing the redshift drifts of quasi-stellar objects in the ＇redshift desert＇ of 2 〈 z 〈 5. In this work, we investigate its constraints on the unified dark energy and dark matter models including the generalized Chaplygin gas and the superfluid Chaplygin gas. In addition, type Ia supernovae （SNIa） data and the distance ratios derived from the cosmic microwave background radiation and baryon acoustic oscillation observations （CMB/BAO） are also used. We find that the mock SL data gives the tightest constraints on the model parameters and it can help to reduce the parameter regions allowed by the present SNIa＋CMB/BAO by about 75% when all datasets considered are combined. Thus the SL test is a worthy and long awaited measurement to probe effectively the cosmic expanding history and the properties of dark energy.

Finite element formulation of active constraining layer damping plate using laminate theory

A new finite element modeling method has been developed using laminate theory in a virtual work principle for active constraining layer damping plate. The frequency dependent modulus of viscoelastic material is described by introducing a few dissipation coordinates, known as GHM (Golla-Hughes-McTavish) method, a standard linear system with constant coefficient. The effectiveness of this method is validated by experimental model. Compared with conventional methods, this method can reduce a number of degrees of freedom and improve accuracy, provides a good model for analogous configurations.

Constraining the Timing of the Molopo Farms Complex Emplacement and Provenance of Its Country Rock

The Molopo Farms Complex(MFC)is a 13000 km2layered,mafic-ultramafic intrusion straddling the southern border of Botswana with South Africa.It does not outcrop due to Cenozoic cover,but is believed to intrude the

Constraining Forces Causing the Meissner Effect

As shown in former papers, the nonadiabatic Heisenberg model presents a novel mechanism of Cooper pair formation which is not the result of an attractive electron-electron interaction but can be described in terms of quantum mechanical constraining forces. This mechanism operates in narrow, roughly half-filled superconducting bands of special symmetry and is evidently responsible for the formation of Cooper pairs in all superconductors. Here we consider this new mechanism within an outer magnetic field. We show that in the magnetic field the constraining forces produce Cooper pairs of non-vanishing total momentum with the consequence that an electric current flows within the superconductor. This current satisfies the London equations and, consequently, leads to the Meissner effect. This theoretical result is confirmed by the experimental observation that all superconductors, whether conventional or unconventional, exhibit the Meissner effect.

Modelling and analysis of metal flowing behaviors in constraining ring rolling of tapered ring with thin wall and three high ribs

Tapered ring with thin wall and three high ribs(TRTWTHR),showing complicated geometry(wall thickness is less than 4 mm and rib height exceeds 20 mm),is extensively utilized to fabricate the critical structural parts of aerospace equipment such as spacecraft cabin,rocket body and fuel tank because of light weight and high carrying capacity.How to fabricate TRTWTHR with high performance is a critical problem that aerospace area needs to solve.In this work,constraining ring rolling(CRR)technique is first adopted to form TRTWTHR.However.unreasonable metal streamlines(UMS)and uncoordinated growth of three ribs easily occur in CRR of TRTWTHR,which makes the forming quality of TRTWTHR difficult to be controlled.Faced with this difficulty,an analytical model that can predict UMS and the height of three ribs in CRR of TRTWTHR is established so as to guide the process design of CRR.Subsequently,the reliability of the established analytical model and the feasibility of CRR of TRTWTHR are confirmed by FE simulation and experiment.Then,using the established analytical model,the window of UMS occurring relevant to the tapered angle of TRTWTHR and the location of the rib of middle end is developed.Finally,three uncoordinated growth modes among three ribs are found when the width of three ribs is identical and UMS do not occur,and the mechanisms of three uncoordinated growth modes are revealed.

Constraining the stepwise migration of the eastern Tibetan Plateau margin by apatite fission track thermochronology

Granites sampled from Garzê-Litang thrust, Longmen Shan thrust, Garzê and Litang strike-slip faults in the eastern Tibetan Plateau have been analyzed with apatite fission track thermochronological method in this study. The measured fission track apparent ages, combined with the simulated annealing mod- eling of the thermal history, have been used to reconstruct the thermal evolutionary histories of the samples and interpret the active history of the thrusts and faults in these areas. Thermal history mod- eling shows that earlier tectonic cooling occurred in the Garzê-Litang thrust in Miocene (~20―16 Ma) whereas the later cooling occurred mainly in the Longmen Shan thrust since ~5 Ma. Our study sug- gests that the margin of eastern Tibetan Plateau was extended by stages: through strike-slip faults deformations and related thrusts, the upper crust formed the Garzê-Litang margin in the Miocene epoch and then moved to the Longmen Shan margin since ~5 Ma. During this process, the deformations of different phases in the eastern Tibetan Plateau were absorbed by the thrusts within them and conse- quently the tectonic events of long-distance slip and extrusion up to hundreds of kilometers have not been found.

A Novel Trajectory Tracking Control of AGV Based on Udwadia-Kalaba Approach

Dear Editor,This letter is about an automated guided vehicle(AGV)trajectory tracking control method based on Udwadia-Kalaba(U-K)approach.This method provides a novel,concise and explicit motion equation for constrained mechanical systems with holonomic and/or nonholonomic constraints as well as constraints that may be ideal or nonideal.In this letter.

Application of novel constrained friction processing method to produce fine grained biomedical Mg-Zn-Ca alloy

In order to obtain Mg alloys with fine microstructures and high mechanical performances,a novel friction-based processing method,name as“constrained friction processing(CFP)”,was investigated.Via CFP,defect-free Mg-Zn-Ca rods with greatly refined grains and high mechanical properties were produced.Compared to the previous as-cast microstructure,the grain size was reduced from more than 1 mm to around 4μm within 3 s by a single process cycle.The compressive yield strength was increased by 350%while the ultimate compressive strength by 53%.According to the established material flow behaviors by“tracer material”,the plastic material was transported by shear deformation.From the base material to the rod,the material experienced three stages,i.e.deformation by the tool,upward flow with additional tilt,followed by upward transportation.The microstructural evolution was revealed by“stop-action”technique.The microstructural development at regions adjacent to the rod is mainly controlled by twinning,dynamic recrystallization(DRX)as well as particle stimulated nucleation,while that within the rod is related to DRX combined with grain growth.

Even Search in a Promising Region for Constrained Multi-Objective Optimization

In recent years, a large number of approaches to constrained multi-objective optimization problems(CMOPs) have been proposed, focusing on developing tweaked strategies and techniques for handling constraints. However, an overly finetuned strategy or technique might overfit some problem types,resulting in a lack of versatility. In this article, we propose a generic search strategy that performs an even search in a promising region. The promising region, determined by obtained feasible non-dominated solutions, possesses two general properties.First, the constrained Pareto front(CPF) is included in the promising region. Second, as the number of feasible solutions increases or the convergence performance(i.e., approximation to the CPF) of these solutions improves, the promising region shrinks. Then we develop a new strategy named even search,which utilizes the non-dominated solutions to accelerate convergence and escape from local optima, and the feasible solutions under a constraint relaxation condition to exploit and detect feasible regions. Finally, a diversity measure is adopted to make sure that the individuals in the population evenly cover the valuable areas in the promising region. Experimental results on 45 instances from four benchmark test suites and 14 real-world CMOPs have demonstrated that searching evenly in the promising region can achieve competitive performance and excellent versatility compared to 11 most state-of-the-art methods tailored for CMOPs.

Fixed-Time Gradient Flows for Solving Constrained Optimization: A Unified Approach

The accelerated method in solving optimization problems has always been an absorbing topic.Based on the fixedtime(FxT)stability of nonlinear dynamical systems,we provide a unified approach for designing FxT gradient flows(FxTGFs).First,a general class of nonlinear functions in designing FxTGFs is provided.A unified method for designing first-order FxTGFs is shown under Polyak-Łjasiewicz inequality assumption,a weaker condition than strong convexity.When there exist both bounded and vanishing disturbances in the gradient flow,a specific class of nonsmooth robust FxTGFs with disturbance rejection is presented.Under the strict convexity assumption,Newton-based FxTGFs is given and further extended to solve time-varying optimization.Besides,the proposed FxTGFs are further used for solving equation-constrained optimization.Moreover,an FxT proximal gradient flow with a wide range of parameters is provided for solving nonsmooth composite optimization.To show the effectiveness of various FxTGFs,the static regret analyses for several typical FxTGFs are also provided in detail.Finally,the proposed FxTGFs are applied to solve two network problems,i.e.,the network consensus problem and solving a system linear equations,respectively,from the perspective of optimization.Particularly,by choosing component-wisely sign-preserving functions,these problems can be solved in a distributed way,which extends the existing results.The accelerated convergence and robustness of the proposed FxTGFs are validated in several numerical examples stemming from practical applications.

Aseismic performances of constrained damping lining structures made of rubber-sand-concrete

Flexible damping technology considering aseismic materials and aseismic structures seems be a good solution for engineering structures.In this study,a constrained damping structure for underground tunnel lining,using a rubber-sand-concrete(RSC)as the aseismic material,is proposed.The aseismic performances of constrained damping structure were investigated by a series of hammer impact tests.The damping layer thickness and shape effects on the aseismic performance such as effective duration and acceleration amplitude of time-domain analysis,composite loss factor and damping ratio of the transfer function analysis,and total vibration level of octave spectrum analysis were discussed.The hammer impact tests revealed that the relationship between the aseismic performance and damping layer thickness was not linear,and that the hollow damping layer had a better aseismic performance than the flat damping layer one.The aseismic performances of constrained damping structure under different seismicity magnitudes and geological conditions were investigated.The effects of the peak ground acceleration(PGA)and tunnel overburden depth on the aseismic performances such as the maximum principal stress and equivalent plastic strain(PEEQ)were discussed.The numerical results show the constrained damping structure proposed in this paper has a good aseismic performance,with PGA in the range(0.2-1.2)g and tunnel overburden depth in the range of 0-300 m.

Dynamic Event-Triggered Consensus Control for Input Constrained Multi-Agent Systems With a Designable Minimum Inter-Event Time

This paper investigates the consensus control of multi-agent systems(MASs) with constrained input using the dynamic event-triggered mechanism(ETM).Consider the MASs with small-scale networks where a centralized dynamic ETM with global information of the MASs is first designed.Then,a distributed dynamic ETM which only uses local information is developed for the MASs with large-scale networks.It is shown that the semi-global consensus of the MASs can be achieved by the designed bounded control protocol where the Zeno phenomenon is eliminated by a designable minimum inter-event time.In addition,it is easier to find a trade-off between the convergence rate and the minimum inter-event time by an adjustable parameter.Furthermore,the results are extended to regional consensus of the MASs with the bounded control protocol.Numerical simulations show the effectiveness of the proposed approach.

Numerical and experimental investigation into the evolution of the shock wave when a muzzle jet impacts a constrained moving body

The gun-track launch system is a new special launch device that connects the track outside the muzzle.Because it is constrained by the track,the characteristics of development of the muzzle jet differ from those of the traditional muzzle jet.Specifically,it changes from freely developing to doing so in a constrained manner,where this results in an asymmetric direction of flow as well as spatio-temporal coupling-induced interference between various shock waves and the formation of vortices.In this background,the authors of this article formulate and consider the development and characteristics of evolution of the muzzle jet as it impacts a constrained moving body.We designed simulations to test the gun-track launch system,and established a numerical model based on the dynamic grid method to explore the development and characteristics of propagation of disturbances when the muzzle jet impacted a constrained moving body.We also considered models without a constrained track for the sake of comparison.The results showed that the muzzle jet assumed a circumferential asymmetric shape,and tended to develop in the area above the muzzle.Because the test platform was close to the ground,the muzzle jet was subjected to reflections from it that enhanced the development and evolution of various forms of shock waves and vortices in the muzzle jet to exacerbate its rate of distortion and asymmetric characteristics.This in turn led to significant differences in the changes in pressure at symmetric points that would otherwise have been identical.The results of a comparative analysis showed that the constrained track could hinder the influence of reflections from the ground on the muzzle jet to some extent,and could reduce the velocity of the shock waves inducing the motion of the muzzle as well as the Mach number of the moving body.The work here provides a theoretical basis and the requisite technical support for applications of the gun-track launch system.It also sheds light on the technical bottlenecks that need to be considered to recover high-value warheads.

Constraints Separation Based Evolutionary Multitasking for Constrained Multi-Objective Optimization Problems

Constrained multi-objective optimization problems(CMOPs)generally contain multiple constraints,which not only form multiple discrete feasible regions but also reduce the size of optimal feasible regions,thus they propose serious challenges for solvers.Among all constraints,some constraints are highly correlated with optimal feasible regions;thus they can provide effective help to find feasible Pareto front.However,most of the existing constrained multi-objective evolutionary algorithms tackle constraints by regarding all constraints as a whole or directly ignoring all constraints,and do not consider judging the relations among constraints and do not utilize the information from promising single constraints.Therefore,this paper attempts to identify promising single constraints and utilize them to help solve CMOPs.To be specific,a CMOP is transformed into a multitasking optimization problem,where multiple auxiliary tasks are created to search for the Pareto fronts that only consider a single constraint respectively.Besides,an auxiliary task priority method is designed to identify and retain some high-related auxiliary tasks according to the information of relative positions and dominance relationships.Moreover,an improved tentative method is designed to find and transfer useful knowledge among tasks.Experimental results on three benchmark test suites and 11 realworld problems with different numbers of constraints show better or competitive performance of the proposed method when compared with eight state-of-the-art peer methods.

Real-time tracking of fast-moving object in occlusion scene

Tracking the fast-moving object in occlusion situations is an important research topic in computer vision. Despite numerous notable contributions have been made in this field,few of them simultaneously incorporate both object's extrinsic features and intrinsic motion patterns into their methodologies,thereby restricting the potential for tracking accuracy improvement. In this paper, on the basis of efficient convolution operators(ECO) model, a speed-accuracy-balanced model is put forward. This model uses the simple correlation filter to track the object in real-time, and adopts the sophisticated deep-learning neural network to extract high-level features to train a more complex filter correcting the tracking mistakes, when the tracking state is judged to be poor. Furthermore, in the context of scenarios involving regular fast-moving, a motion model based on Kalman filter is designed which greatly promotes the tracking stability, because this motion model could predict the object's future location from its previous movement pattern. Additionally,instead of periodically updating our tracking model and training samples, a constrained condition for updating is proposed,which effectively mitigates contamination to the tracker from the background and undesirable samples avoiding model degradation when occlusion happens. From comprehensive experiments, our tracking model obtains better performance than ECO on object tracking benchmark 2015(OTB100), and improves the area under curve(AUC) by about 8% and 32% compared with ECO, in the scenarios of fast-moving and occlusion on our own collected dataset.

Three-dimensional constrained gravity inversion of Moho depth and crustal structural characteristics at Mozambique continental margin

Mozambique's continental margin in East Africa was formed during the break-off stage of the east and west Gondwana lands. Studying the geological structure and division of continent-ocean boundary(COB) in Mozambique's continental margin is considered of great significance to rebuild Gondwana land and understand its movement mode. Along these lines, in this work, the initial Moho was fit using the known Moho depth from reflection seismic profiles, and a 3D multi-point constrained gravity inversion was carried out. Thus, highaccuracy Moho depth and crustal thickness in the study area were acquired. According to the crustal structure distribution based on the inversion results, the continental crust at the narrowest position of the Mozambique Channel was detected. According to the analysis of the crustal thickness, the Mozambique ridge is generally oceanic crust and the COB of the whole Mozambique continental margin is divided.

Constrained Multi-Objective Optimization With Deep Reinforcement Learning Assisted Operator Selection

Solving constrained multi-objective optimization problems with evolutionary algorithms has attracted considerable attention.Various constrained multi-objective optimization evolutionary algorithms(CMOEAs)have been developed with the use of different algorithmic strategies,evolutionary operators,and constraint-handling techniques.The performance of CMOEAs may be heavily dependent on the operators used,however,it is usually difficult to select suitable operators for the problem at hand.Hence,improving operator selection is promising and necessary for CMOEAs.This work proposes an online operator selection framework assisted by Deep Reinforcement Learning.The dynamics of the population,including convergence,diversity,and feasibility,are regarded as the state;the candidate operators are considered as actions;and the improvement of the population state is treated as the reward.By using a Q-network to learn a policy to estimate the Q-values of all actions,the proposed approach can adaptively select an operator that maximizes the improvement of the population according to the current state and thereby improve the algorithmic performance.The framework is embedded into four popular CMOEAs and assessed on 42 benchmark problems.The experimental results reveal that the proposed Deep Reinforcement Learning-assisted operator selection significantly improves the performance of these CMOEAs and the resulting algorithm obtains better versatility compared to nine state-of-the-art CMOEAs.

Summer Atmospheric Water Cycle under the Transition Influence of the Westerly and Summer Monsoon over the Yarlung Zangbo River Basin in the Southern Tibetan Plateau

This study compares the summer atmospheric water cycle,including moisture sources and consumption,in the upstream,midstream,and downstream regions of the Yarlung Zangbo River Basin in the southern Tibetan Plateau.The evolutions of moisture properties under the influence of the westerly and summer southerly monsoon are examined using 5-yr multi-source measurements and ERA5 reanalysis data.Note that moisture consumption in this study is associated with clouds,precipitation,and diabatic heating.Compared to the midstream and downstream regions,the upstream region has less moisture,clouds,and precipitation,where the moisture is brought by the westerly.In early August,the vertical wet advection over this region becomes enhanced and generates more high clouds and precipitation.The midstream region has moisture carried by the westerly in June and by the southerly monsoon from July to August.The higher vertical wet advection maximum here forms more high clouds,with a precipitation peak in early July.The downstream region is mainly affected by the southerly-driven wet advection.The rich moisture and strong vertical wet advection here produce the most clouds and precipitation among the three regions,with a precipitation peak in late June.The height of the maximum moisture condensation is different between the midstream region(325 hPa)and the other two regions(375 hPa),due to the higher upward motion maximum in the midstream region.The diabatic heating structures show that stratiform clouds dominate the upstream region,stratiform clouds and deep convection co-exist in the midstream region,and deep convection systems characterize the downstream region.

Optimality Conditions for Double-sparsity Constrained Optimization

Sparse optimization has witnessed advancements in recent decades,and the step function finds extensive applications across various machine learning and signal processing domains.This paper integrates zero norm and the step function to formulate a doublesparsity constrained optimization problem,wherein a linear equality constraint is also taken into consideration.By defining aτ-Lagrangian stationary point and a KKT point,we establish the first-order and second-order necessary and sufficient optimality conditions for the problem.Furthermore,we thoroughly elucidate their relationships to local and global optimal solutions.Finally,special cases and examples are presented to illustrate the obtained theorems.