Study on Characteristics of Consumption Demand and Its Constraints of Rural Areas in China

Combining the statistic data of 1997~2009,this paper analyzes the income of farmers in eight minority areas, structure of consumption demand, the marginal propensity to consume and its constraints factors on eight minority provinces,finally, concludes with some specific proposals. That includes increasing peasant’s income, strengthening rural infrastructure construction, establishing perfect rural social security system and promoting reasonable and healthy consumption of peasants.

OUT-OF-PLANE COMPRESSIVE PROPERTIES OF HEXAGONAL PAPER HONEYCOMBS

The compressive behaviour of paper honeycombs is studied by means of an experimental analysis. Experiment results show how geometry aspects of hexagonal paper honeycombs, e.g. the height of paper honeycomb, the thickness and length of honeycomb cell-wall, the drawing ratio of hexagonal honeycomb, affect the compressive properties of the paper honeycombs. It is in good agreement with the theory model. The constraint factor K of the critical buckling stress is mainly determined by the length of honeycomb cell-wail. It can be described as K=1.54 for B type paper honeycombs and K=3.32 for D type paper honeycombs. The plateau stress is the power exponent function of the thickness to length ratio of honeycomb cell-wall, and the experiment results show that the constant is 13.2 and the power exponent is 1.77. The research results can be used to characterize and improve efficiently the compressive properties of paper honeycombs.

Modeling of Fatigue Crack Growth Closure Considering the Integrative Effect of Cyclic Stress Ratio,Specimen Thickness and Poisson's Ratio

Key components of large structures in aeronautics industry are required to be made light and have long enough fatigue lives.It is of vital importance to estimate the fatigue life of these structures accurately.Since the FCG process is affected by various factors,no universal model exists due to the complexity of the mechanisms.Most of the existing models are obtained by fitting the experimental data and could hardly describe the integrative effect of most existing factors simultaneously.In order to account for the integrative effect of specimen parameters,material property and loading conditions on FCG process,a new model named integrative influence factor model（IIF） is proposed based on the plasticity-induced crack closure theory.Accordingly to the predictions of crack opening ratio（γ） and effective stress intensity factor range ratio（U） with different material under various loading conditions,predictions of γ and U by the IIF model are completely identical to the theoretical results from the plane stress state to the plane strain state when Poisson＇s ratio equals 1/3.When Poisson＇s ratio equals 0.3,predictions of γ and U by the IIF model are larger than the predictions by the existing model,and more close to the theoretical results.In addition,it describes the influence of R ratios on γ and U effectively in the whole region from-1.0 to 1.0.Moreover,several sets of test data of FCG rates in 5 kinds of aluminum alloys with various specimen thicknesses under different loading conditions are used to validate the IIF model,most of the test data are situated on the predicted curves or between the two curves that represent the specimen with different thicknesses under the same stress ratio.Some of the test data slightly departure from the predictions by the IIF model due to the surface roughness and errors in measurement.Besides,based on the analysis of the physical rule of crack opening ratios,a relative thickness of specimen is defined to describe the influence of material property,specimen thickness and so forth on FCG characteristics conveniently.In conclusion,the relative thickness of specimen simplifies the expression of FCG characteristic and provides a general parameter to analyze the fatigue characteristics of different materials with various thicknesses under different loading conditions.The IIF model describes the integrative effect of existing influence factors explicitly and quantitatively,and provides a helpful tool for fatigue property estimation of practical component and experiment design.

An Effective Feature Modeling Approach for 3D Structural Topology Design Optimization

This paper presents a feature modeling approach to address the 3D structural topology design optimization withfeature constraints. In the proposed algorithm, various features are formed into searchable shape features bythe feature modeling technology, and the models of feature elements are established. The feature elements thatmeet the design requirements are found by employing a feature matching technology, and the constraint factorscombined with the pseudo density of elements are initialized according to the optimized feature elements. Then,through controlling the constraint factors and utilizing the optimization criterion method along with the filteringtechnology of independent mesh, the structural design optimization is implemented. The present feature modelingapproach is applied to the feature-based structural topology optimization using empirical data. Meanwhile, theimproved mathematical model based on the density method with the constraint factors and the correspondingsolution processes are also presented. Compared with the traditional method which requires complicated constraintprocessing, the present approach is flexibly applied to the 3D structural design optimization with added holesby changing the constraint factors, thus it can design a structure with predetermined features more directly andeasily. Numerical examples show effectiveness of the proposed feature modeling approach, which is suitable for thepractical engineering design.

Effect of three dimensional stress state on unstable fracture condition and crack opening level in a new crack growth model

A new model for the analysis of fatigue crack growth in the metal structures was proposed. This model shows a promising capability of explaining various fatigue phenomena. The new crack growth model is further completed by a continuous empirical formula for estimating the value of variable fracture toughness during crack propagation and a modified continuous equation for the crack tip stress/strain constraint factor used to calculate the stress intensity factor at the opening level. The prediction results are proved to agree well with the observed phenomena in test.

Characterisation of flowability of cohesive powders by testing small quantities of weak compacts

Characterisation of flowability of small quantities of cohesive powders is of great industrial interest, particularly for the pharmaceutical sec- tors, where a limited amount of material is available or the material is not easily accessible. In this paper, ball indentation on a powder bed is evaluated for flow characterisation of small quantities of cohesive powders at low levels of consolidation pressures. In parallel, the bulk powder is subjected to the common test method of unconfined direct compression. Analogous to indentation hardness testing, for which the indentation pressure is related to the flow stress, a constraint factor (C) is defined relating the unconfined yield stress and indentation pres- sure. The constraint factors for the test powders have been evaluated, enabling an easy method to characterize the flow behaviour of cohesive powders.