Exploration of the Construction and Path Selection of the Deep Integration Model of Industry-Education in Universities

Against the backdrop of continuous development in the field of education,universities are encouraged to innovate their talent cultivation systems and objectives.The deep integration of industry and education has emerged as an effective strategy,aligning with the basic requirements of the new engineering education initiative and exerting a positive impact on socioeconomic development.However,an analysis of the current state of industry-education integration in universities reveals several issues that require optimization,affecting the ultimate effectiveness of integration.To optimize this phenomenon and achieve high-quality development,universities need to further explore the construction of a deep integration model of industry and education,adhering to corresponding principles to form a comprehensive system.On this basis,pathways for deep industry-education integration can be summarized.

3D Model Construction and Ecological Environment Investigation on a Regional Scale Using UAV Remote Sensing

The acquisition of digital regional-scale information and ecological environmental data has high requirements for structural texture,spatial res-olution,and multiple parameter categories,which is challenging to achieve using satellite remote sensing.Considering the convenient,facilitative,and flexible characteristics of UAV(unmanned air vehicle)remote sensing tech-nology,this study selects a campus as a typical research area and uses the Pegasus D2000 equipped with a D-MSPC2000 multi-spectral camera and a CAM3000 aerial camera to acquire oblique images and multi-spectral data.Using professional software,including Context Capture,ENVI,and ArcGIS,a 3D(three-dimensional)campus model,a digital orthophoto map,and multi-spectral remote sensing map drawing are realized,and the geometric accuracy of typical feature selection is evaluated.Based on a quantitative remote sensing model,the campus ecological environment assessment is performed from the perspectives of vegetation and water body.The results presented in this study could be of great significance to the scientific management and sustainable development of regional natural resources.

基于改进24Model-ISM-SNA建筑工人不安全行为关联路径研究

建筑施工现场环境复杂,为有效控制不安全行为发生,基于行为安全“2-4”模型对360份具有代表性的建筑安全事故调查报告进行分析,提取出22个不安全行为的主要影响因素。利用灰色关联分析方法(GRA)改进的集成ISM-SNA模型,将不安全行为风险因素划分为表层、过渡层与深层,然后对风险因素进行可视化分析、中心度分析及凝聚子群分析,揭示了各致因因素间的关联关系和传导路径。结果表明,建筑工人不安全行为影响因素可划分成7级3阶的多级递阶结构,安全意识、现场监管、外部环境是建筑工人不安全行为的关键影响因素,同时现场监管和隐患排查到位能有效降低不安全行为的发生。

Enhanced Constructability Using 4D Plus Modelling in Brownfield Sites

In the oil and gas industry, operations in greenfield sites are straightforward. However, there are increased risks, such as damage to existing facilities, unknown site conditions, and other complexities in brownfield sites. In addition to these physical risks, task scheduling is also complex, as vessels need to be replaced during a turnaround. To mitigate the risks of site conditions and realize a truncated schedule for Saudi Aramco’s operations, 3D laser scanning was combined with 3D modeling, clash detection, and time. This integrated approach minimized the shutdown period, which resulted in cost savings, heightened safety, and enhanced stakeholder communications.

Selection of New Countryside Construction Model and Enlightenment for Ganlu Town, Zizhong County, Neijiang City

Basic conditions and new countryside construction of Ganlu Town, Zizhong County, Neijiang City were analyzed, SWOT adopted to analyze internal strengths, weaknesses, external opportunities and threats of its new countryside construction. On this basis, positive and practical strategies were put forward to promote the new countryside construction in the local area, and provide references for the new countryside construction in other regions.

Construction and visualization of 3D vacant place model

The method of building 3D model was discussed at first. Aiming at the feature of mine vacant place,a method to build the 3D vacant place model based on multi TIN (triangular irregular network) was put forward, and the data structure and visualization of vacant place were discussed. Then some crucial technologies of realizing function in 3D-GIS were proposed. In addition,the software about special 3D mapping and assaying was introduced.

Research on Main Problems and Solutions of Construction Model of China's “Broadband Village”

Broadband network plays an increasingly important strategic role in the development of new rural economy,society and culture.Based on the analysis of the construction of rural agricultural informatization and existing problems in our country,this paper gives the path selection and measures of " broadband village" combined with regional characteristics to select the construction path of " broadband village",it needs to build the long term mechanism of " broadband village" investment and financing,determine the goal of the regional construction of " broadband village" and focus on promoting the development of rural informatization services.

Scheme of Constructing CGE Model of China's Direct Grain Subsidy Policy

This paper introduces the model of China's direct grain subsidy policy, adopts computable general equilibrium (CGE) theory, and advances the scheme of constructing the model of China's direct grain subsidy policy. On the basis of some assumptions, such as conforming to the complete competition of market, inexistence of move of capital and labor forces among countries, unchanged exchange rate and incomplete substitution, and the main body of behavior comprising representative households, producers, local government and central government, the model established in this paper includes production module and demand module. Moreover, the model takes into account equilibrium structure, the definition of profiting and macro condition for closure, the related coefficients this CGE model needs include Armingtion substitution elasticity of intermediate composite product, investment composite product and consumption composite product between import and domestic production; substitution elasticity among production factors; conversion elasticity of total sales between domestic absorption and export; elasticity of residents' expenditure; elasticity of price; elasticity of export demand; the relative share of all sectors in capital stock. This paper also points out the advantages and limitations of CGE model in analyzing direct grain subsidy policy.

Geometry model construction in infrared image theory simulation of buildings

Geometric model construction is the basis of infrared image theory simulation. Taking the construction of the geometric model of one building in Harbin as an example, this paper analyzes the theoretical groundings of simplification and principles of geometric model construction of buildings. It then discusses some particular treatment methods in calculating the radiation transfer coefficient in geometric model construction using the Monte Carlo Method.

Countermeasures for Solving the Environmental Problems and Accelerating the Model City Construction of Xi'an

Through careful study, it found that the key and difficult points of affecting and restricting Xi＇an to reach the model city construction standards in provincial and national levels were ＂urban air environment quality standards＂ and ＂water qualification rate of urban water environment function area＂. In order to tackle with the weak links, highlight the important points and focus on the difficult points to strengthen scientific and technological innovation, we actively explored new ideas and ways to resolve the dilemma in meeting the two standards of model city construction, and we managed to put forward the countermeasures to resolve the dilemma through innovating system and mechanism. ＂Place master system＂ should be carded out quickly to meet the ＂urban air environment quality standards＂, while ＂river master system＂ should be implemented as soon as possible to reach the ＂water qualification rate of urban water environment function area＂. The aim of this study was to enhance the qualification rates of the indicators for model city construction to make Xi＇an successfully pass the provincial and national assessment of model city construction through dealing with the weak links to accelerate the realization of becoming model environmental protection city.

Model Construct Based Enterprise Model Architecture and Its Modeling Approach

In order to support enterprise integration, a kind of model construct based enterprise model architecture and its modeling approach are studied in this paper. First, the structural makeup and internal relationships of enterprise model architecture are discussed. Then, the concept of reusable model construct (MC) which belongs to the control view and can help to derive other views is proposed. The modeling approach based on model construct consists of three steps, reference model architecture synthesis, enterprise model customization, system design and implementation. According to MC based modeling approach a case study with the background of one-kind-product machinery manufacturing enterprises is illustrated. It is shown that proposal model construct based enterprise model architecture and modeling approach are practical and efficient.

Research on regional capability constructive models of clean development mechanism

Global climate change has been identified as the first of the top ten environmental problems in the world. As climate change will have serious effects on the social and economic development and everyday living of people in the world, many of the countries and governments are taking untiring efforts to combat climate change. As one of the important mechanisms of reducing greenhouse gas (GHG) emissions in the Kyoto Protocol, Clean Development Mechanism (CDM) has not only provided chance for developed countries to fulf ill greenhouse emission reduction obligations, but also provided an opportunity for developing countries to combat climate change under the sustainable development frame. The dual objectives of developed countries' GHG emissions' reduction obligation achievement and developing countries' sustainable development will be achieved under the CDM. As a country with responsibility, China has been positively developing CDM projects and promoting energy saving and emissions reduction during the three years after the Kyoto Protocol came into force, and CDM projects development has always been in the front tank in the world. However, as the vast clime within China, notable differences occur in different regions. In order to promote the CDM development in China, it is necessary to have regional CDM capability construction in accordance with the practicality in different regions. Based on the Slat Analysis of developed CDM projects and current CDM development status in China, problems in the CDM development of China, including the inefficiency in small and medium-sized CDM Projects development, over centralization of CDM development scope and especially the differentiated provincial CDM projects developing capability are pointed out in the paper. What's more, reasons for the problems are analyzed from the leading factors, including policy orient, information asymmetry and weak CDM capability. In order to promote CDM projects development in China, a new CDM capability construction model is put forward in the paper.

Research on the Construction Priority Model of Bus Lanes

Priority of public transport is one of the important means to enhance the attraction of ground public transportation, and also an important content in the construction of a public transport city. In recent years, Beijing has witnessed large-scale construction of Bus Lane. Based on the current situation that the construction of Bus Lane lacks scientific decision-making methods, this study establishes the time sequence evaluation indicator system for the construction of Bus Lane by analyzing the influencing factors, builds a ranking model of the importance degree of the construction of Bus Lane, and conducts case verification.

Construction of a model of autologous blood intracerebral hemorrhage in rats with a double injection and double needle withdrawal and the characteristics of the operative technique

BACKGROUND ： Experimental animal models of intracerebral hemorrhag （ICH） are greatly needed, so the process of establishment should be ideal in hematoma formation and easy to operate. OBJECTIVE ： To construct model of ICH in rats with double injection of autologous blood taken from the cut tail cut and double withdrawal of the needle （shortened as two-step injection model）, and compare with those induced by single and double injections. DESIGN ： A randomized controlled tria SETTING： Department of Neurology, General Hospital of Military Area Command of Chinese PLA. MATERIALS： Thirty male Wistar rats of 10 to 12 months, weighing （400±25） g, provided by the Experimental Center of Medical Animals, General Hospital of Shenyang Military Area Command of Chinese PLA, were divided randomly into 3 groups with 10 rats in each group： two-step injection group, single injection group, double injection group. METHODS ： The experiment was carried out in the Department of Neurology, General Hospital of Military Area Command of Chinese PLA from March to June in 2004. Autologous blood ICH model in rats were established as follows： In the two-step injection group, 50 μL unclotted autologous blood was taken from the rat tail cut, then injected with microsyringe into the caudate nucleus, 10 μL injected at first, paused for 2 minutes, and then the rest 40 μL injected slowly and continuously within 2 minutes. After the injection, the needle was kept immovable for about 4 minutes, withdrawn 2.0 mm, again kept immovable for about 4 minute, and then removed wholly at a slow speed. In the single injection group, 50 μL unclotted tail blood was injected slowly and continuously all within 2 minutes and the needle was slowly removed;（4） In the double injection group, 10 mL blood was injected at first, paused for 2 minutes, the rest 40 μL injected evenly within 2 minutes, and then the needle was withdrawn slowly and uninterruptedly. Neurologic findings were scored in accordance with Longa＇s five-point scale （0-4 scores, the higher the score, the severer the neurological dysfunction）. The rats were killed to remove and sections were prepared, the morphological features of hematomas were grossly observed, the maximal diameter and size of hematomas in each slice were measured with the imaging analytical system, and the volume was calculated. Meanwhile, the conveniences of the techniques were compared. MAIN OUTCOME MEASURES： The morphological features and volume of hematomas, neurologic deficit score （NDS）, and the convenience of the techniques were compared. RESULTS： All the 30 rats were involved in the analysis of results without deletion. （1） Results of the morphological observation of volume of hematoma： In the two-step injection group, hematomas located in the right caudate nucleus area regularly in circular or analogously circular shape in each slice. The formation rate of hematomas in the single injection group and double injection group were lower than those in the two-step injection group [60% （6/10）, 80% （8/10）, 100% （10/10）, P〈 0.01, 0.05]. The volume of hematomas in the single injection group and double injection group were smaller than those in the two-step injection group [（28.5±14.8）, （33.4±7.4）, （41.6±3.9） mm3, P〈 0.01, 0.05]. （2） NDS results： The NDS scores in the single injection group and double injection group were smaller than that in the two-step injection group （0.90±0.83, 1.30±0.78, 1.90±0.57, P〈 0.05）. （3）Comparison of the convenience of the techniques： The double injection method allowed generating reproducible hematomas in rats with shortcomings that it needed autologous arterial blood from femoral artery, and precision instruments such as microinfusion pump. The two-step injection injected fresh unclotting blood taken directly from the tail cut with microsyringe into the rat brain, and it has the advantages of easy operation, no influence on the activity of thrombase, shorter duration for model establishment, and higher rate of hematoma formation, which could generate ideal and economical models of ICH. The two-step injection induced hemotoma regularly in circular or analogously circular shape in each slice, but those induced by single and double injections were mostly in strip or fusiform shapes and extending along the needle tracks or into the ventricle or subarachnoid space. CONCLUSION ： The autologous blood ICH model induced by the two-step injection method is a reproducible and reliable one in regular shape, which is better than those induced by double and single injections.

Research on the railway construction process quality model based on the state space method

In the ISO9000"input-output"process model,the concept of process quality is difficult to get the correct interpretation. From the"white box"theory of process,this paper puts forward the scientific meaning of the concept of process quality and the process quality model by taking the basic operating unit of 6M1E in the railway construction project for example. The basic operating unit system consists of technological natural process,operation process and management process;the process quality of the basic operating unit system depends on the interrelation and interaction among those three sub-processes,and also subjects to the impact of the external disturbance input factors. Finally,the cast-in-situ prestressed concrete continuous box girder construction process is utilized to elaborate the specific application of this theory in the quality management of the railway construction project.

Solving the Jaynes-Cummings Model with Shift Operators Constructed by Means of the Matrix-Diagonalizing Technique

The Jaynes-Cummings model is solved with the raising and lowering（shift） operators using the matrix-diagonalizing technique. Bell nonlocality is also found to be present ubiquitously in the excitation states of the model.

Knowledge Economy: Model Construction and Development Trend of Online Education

In regard to knowledge economy,the current concept in the model construction of online education,including distance education and online learning,generally refers to a kind of network-based learning behavior,similar to the concept of online training.Compared with traditional offline education methods,through the application of information technology and internet technology for content dissemination and rapid learning,online education has the characteristics of high efficiency,convenience,low threshold,and rich teaching resources.Online education covers a wide range of people,different forms of learning,and its classification methods are more diverse.Online education services are the fastest growing field of education informatization.At the moment,the most pressing problems include effectively integrating educational resources with internet technology,launching online education services and products that are highly interactive and would encourage personalized learning,increasing user stickiness,as well as avoiding trend-following and conceptualized investment.

Marketing Model Analysis of Fashion Communication Based on the Visual Analysis of Neutrosophic Systems

In order to Improvement the Neutrosophic sets as effective tools to deal with uncertain and inconsistent information.The research takes method-ology of combined single-valued neutrosophic rough set and multi-scale deci-sion systems.This paper proposes the optimal scale selection and reduction algorithms based on multi-scale single-valued neutrosophic dominance rough set model.User requirements were analyzed using KJ method to construct a hierarchical model.According to the statistics of representative studies from China and the West,we found that,on the one hand,classical theory has been expanded and supplemented in fashion culture communication and market-ing.The topics are more micro-diverse,and the research methods are inspired by other disciplines;on the other hand,Chinese practice and Chinese cultural perspective need to fill the gap.The fashion content in the new fashion,however,needs to broaden its boundaries,and in addition to integrating with cultural theory and sociology,it needs to be integrated with fashion products,including product design,visual communication,image design and so on.Aesthetic communication needs to be taken into account as an important connotation,with visual communication and the communication of images as important research elements.On the whole,this research abroad inspires the development of domestic fashion culture communication and marketing research.

Analytic model of deformation of construction interfaces of rolled control concrete dam

The construction interfaces of RCCD have a distinct influence on the deformation of dams. The characters and rules on deformation of construction interfaces are studied. The methods simulating the deformation of the interfaces at different stages are proposed. A thickness analytic model and a no-thickness analytic model of construction interfaces are built. These models can reflect the elastic deformation, the attenuation creep deformation, the irreversible creep deformation and the accelerating creep defor- mation of interfaces. The example shows that these proposed models can simulate the deformation of the dam structure objectively. Especially, the results of the thickness analytic model which simulates the gradual changing regularities of interfaces can tally with those of monitoring in situ preferably. The methods proposed and the analytic models can be generalized and applied to general concrete dams, especially to the analysis on deformation rules of fault and interlayer in dam base.