Stabilization of a Lateric Clay from Burkina Faso with Cement-Metakaolin for an Application in Road Construction

The objective of this work is to obtain a composite of clay-cement-metakaolin having good mechanical properties and geotechnical. To do this, a lateritic clay from Burkina Faso referenced ALK was characterized by various methods (X-ray diffraction, infrared spectrometry, thermal analysis and Inductively Coupled Plasma, Atomic Emission Spectrometry) in order to be used as a base course after adding cement and metakaolin. The results of the mineralogical characterization of this clay showed that it is composed of kaolinite (65.7 wt.%), quartz (19.3 wt.%) and goethite (10.8 wt.%). The geotechnical tests carried out showed that ALK is moderately plastic with a plasticity index Ip = 22%. The optimum moisture content and the maximum dry density are respectively 15.9% and 1.76 g∙cm-3. Simple compressive strength and splitting tensile strength are Rc = 1.59 MPa and ft = 0.149 MPa respectively. The California Bearing Ratio (CBR) index at 95% is 40% and above the minimum value of 30% shows that ALK can be used as a sub-base course in road construction. The addition of cement and metakaolin in various proportions improved the CBR index and the mechanical strength of the composites produced. This improvement is due to the formation of hydrated calcium silicate (CSH) resulting from the pozzolanic reaction between the portlandite of the cement and the amorphous silica of the metakaolin. Thus the 2 wt.% metakaolin and 6 wt.% cement formulation with a 95%CBR index of 81% is suitable for the development of a base course in road construction.

Evaluating the Impact of Workshop Management on the Progress of Road Construction Projects(Case Study:Road Construction Projects of Tehran Province)

Construction projects,including road construction,are very important.Therefore,a lot of money is spent on these projects every year.So,the lack of proper planning will increase the cost and cause irreparable damage to the country.The role of workshop management is one of the most important factors in increasing the cost of these types of projects.Generally,workshop management plays a very important role in improving the quality and quantity of projects and has an important place in the project implementation process.Therefore,this study evaluated the impact of workshop management on the progress of road construction projects on a case-by-case basis in road construction projects in Tehran province.According to the purpose of the research,this study was a descriptive-survey type.In addition,the tool used in this research was a questionnaire.The statistical population of this research included all experts and specialists in road construction projects,among whom 65 people were selected by snowball method.Then the collected data were analyzed using SPSS software.The results of this study showed that the management of the workshop and its role in the control and implementation of projects is a complex process,which can be implemented at high levels and effectively by combining scientific and experimental training.And a very important point in the discussion of workshop management is applying scientific management to the use of valuable experiences from others.Because management knowledge not only does not negate the use of these experiences,but also emphasizes the necessity of using them.In other words,improving the knowledge of workshop management is one of the requirements for the implementation of value engineering in construction projects,especially road construction,and it is very important.

Analysis of New Materials Application in Municipal Road Construction

In order to promote the development of road traffic in our country,it is necessary to strengthen the research on municipal road construction technology,constantly innovate construction technology and construction technique,and then effectively ensure the rapid development of urban traffic.This paper mainly elaborates on asphalt road surface regeneration technology,modified asphalt concrete,concrete road surface anti-cracking technology,three-dimensional printing technology,composite material road surface,polymer composite materials,etc.,to ensure the development of urban transportation and the quality of municipal road projects.

Application of BIM + Virtual Simulation Technology in Road Engineering Construction Technology and Organization Course

We focus on the goal of undergraduate talent training,consider the course features of Road Engineering Construction Technology and Organization,analyze the problems existing in the practical teaching of the course,use the advantages of BIM+virtual simulation technology,design a scientific and reasonable practical teaching content of Road Engineering Construction Technology and Organization,and address the contrast between the strong practical aspect of the traditional Road Engineering Construction Technology and Organization course and the lack of practical instruments in hope to improve students’learning autonomy,enhance the quality of practical teaching,achieve the training objectives of the course,and nurture applied technical talents.

Technologies for Asphalt Pavement Surface Testing in Road and Bridge Construction

Asphalt pavement is currently one of the main components in the construction of roads and bridges.However,from a practical point of view,various quality problems are prone to occur in the surface layer of asphalt pavement,which will lead to the poor overall quality of road and bridge projects.Therefore,it should be applied reasonably.Advanced testing technologies are used to test the mixture quality,compaction,segregation,thickness,and other aspects of the asphalt pavement surface layer,so as to improve the quality of the asphalt pavement surface layer,and then improve the overall quality of road and bridge construction.Therefore,this paper mainly analyzes the technologies for asphalt pavement surface layer testing in road and bridge engineering construction.

Road construction and landscape fragmentation in China

The landscape fragmentation caused by road construction has many direct and indirect impacts on wildlife and ecosystems. By using the GIS and statistic software of fragmentation computation, a comprehensive index, road-induced landscape fragmentation index (RLFI), is proposed to quantify the degree of landscape fragmentation resulting from different levels of road constructions. The results show that road-induced fragmentation index in China ranges from 0.987 to 3.357, with a mean of 1.846 in 2002. The regional differences of landscape fragmentation are obvious and scoring sequence is: North China (2.65) > East China (2.62) > Central China (2.60) > South China (2.51) > Southwest China (2.34) > Northeast China (2.19) > Inner Mongolia (1.88) > Northwest China (1.67) > Qinghai-Tibet Plateau (1.65). The anisotropic analysis indicates that the variation of fragmentation index in east-west direction is larger than that in south-north direction.

Measurement of dust emission from a road construction using exposure-profiling method

Road construction is one example of heavy constructions that may have a substantial temporary impact on local air quality. Construction of Lule? Road during the summer of 2013 generated a great deal of dust emission. US EPA recommended exposure-profiling method was used to measure dust emission. Inexpensive BSNE dust samplers were used instead of high volume samplers. The objective was to give a general idea of the amount of dust generated due to the construction work. Dust generation related to weather was discussed under conditions. Estimated threshold wind velocities for road surface materials at the height of 2 m were 12.88 m/s, 12.88 m/s and 24.76 m/s which were lower measured wind velocities, indicating no dust generated from wind erosion. Dust masses for 7 sampling periods show dust generation had a close relation with moisture content of surface material. Wind speed, humidity had minor or no effect. The estimated dust emission rate in the construction work during the measuring period was 22.86 kg TSP/d, 6 kg/d was from construction work and 16.86 kg/d was generated due to traffic on temporary roads.

The distribution and frequency of damage to roadside trees in low-volume road construction

We investigated the distribution and frequency of damage to tree stands adjacent to low-volume roads according to the type of hillside materials involved（soil or rock） and hillside gradient in mountainous forests of northern Iran. A total of 80 plots were systematically and randomly sampled to record damaged trees（bending,crushing and wounding） by class of hillside gradient and materials at the edge of road. Tree wounding and crushing at rock slopes was significantly greater than at hillsides with a mix of clay soil（p ／ 0.05）. Damage on hillsides with slope gradients[45% were 2, 8.5 and 2.3 times more frequent than on hillsides with slope gradient／15% for bending, crushing and wounding, respectively. The damage distribution varied according by type and the most frequent damage was tree wounding（p ／ 0.05）. The damage distribution was measured at distances of 4, 5 and 8 m from the road fillslope for tree bending, crushing and wounding, respectively. Using hydraulic excavators and physical barriers（wooden obstruction and synthetic holder） during earthworks for road construction could reduce these damage.

Traffic organization during urban road constructions

This research presented a bi-level programming approach to optimize the schedule of ur- ban road construction activities based on a hypothetical transport network, with an objective of mini- mizing the overall traffic delays. A heuristic algorithm was utilized to identify a set of road construction schedules, while PARAMICS was adopted to estimate the total travel time in the network under each road construction scenario. To test the performance of proposed heuristics-simulation methodology, a numerical test was implemented. The overall results suggested that the proposed methodol- ogy could quickly find the optimum solution with good convergence.

China ＆ Mexico Have Many Cooperation Opportunities During Belt and Road Construction

"The Mexico-China relationship is in its best phase,and the political and economic cooperation is undergoing better growth.Mexican produce has more competitiveness in China and Mexico is attracting more and more Chinese investments.The bilateral trade value surpassed USD 75 billion last year,"said Jose Bernal,Mexico’s Ambassador to China.Strong complementary effects According to Mexico’s National Statistics Bureau,the bilateral

Analysis of the Application of Windbreak and Sand Fixation Technology in Desert Roads

In order to solve the problems in the construction of desert roads and improve the quality of desert roads in China,this paper discusses the current windbreak and sand fixation technologies in desert areas in China,and puts forward relevant suggestions and corresponding solutions for each problem.This paper is written with hopes of contributing to the development of windbreak and sand fixation technologies in China as well as the development of the economy,society and environment in China's deserts.

Effects of Tidal Channels and Roads on Landscape Dynamic Distribution in the Yellow River Delta, China

Landscape characters in estuarine regions generally controlled by tidal regimes and human activities like road construction.In this work,tidal channels and road construction in the Yellow River Delta(YRD)were extracted by visual interpretation methods so as to decipher impacts of tidal channel development and road construction on landscape patch change during 1989–2016.Spatial distribution history of three wetlands,which covered by Phragmites australis(freshwater marsh,FM),Suaeda salsa(salt marsh,SM),and mudflats(MD)were also established.Results indicated that tidal channel,number,frequency,and fractal dimension were all the maximum in 2003,and the minimum in 1998,respectively.Road length,number,and density showed increasing trend during 1989–2016.MD were the predominant landscape type,followed by FM and SM during 1989-2016.Principal component analysis implied two extracted factors,F1 and F2,which could represent 91.93% of the total variations.F1 mainly proxied tidal channel development,while F2 represented road construction.A multiple linear regression analysis showed positive effects of both F1 and F2 on FM patch numbers and negative impacts on SM patch areaes with R^2 values of 0.416 and 0.599,respectively.Tidal channels were negatively related to MD patch numbers,while roads were positively related to that.In any case,road construction showed larger impacts on landscape type shifting than that of tidal channel development in the YRD.

壮族医学“三道两路”核心理论的建构

"三道两路"是壮族医学理论体系中的核心理论,其建构过程受到社会、文化等多方面因素的影响,是壮医研究者对壮族民间医药经验说法进行选择、提炼、整合的结果。在这一核心理论的确立过程中,相关研究者排除了"鬼神—巫医"解释而选取"三道两路"概念,如此既符合现代医学理论的要求,又兼顾自身的独特性以及与中医、西医理论的相通性,最后被成功纳入国家认可的民族医学体系,体现出壮医研究者独特的建构策略。

Modeling the effect of a freeway road construction project on link-level travel times

Drivers experience variations in travel time due to congestion and delays associated with road construction projects on existing transportation facilities. The effect on the travel time of a link decreases as its distance from the road construction project increases. In addition, the effect could extend to the connecting arterial street links within the vicinity of the road construction project. Therefore, the focus of this research is to model the effect of a road construction project on the freeway and connecting arterial street link-level travel times. Data pertaining to a resurfacing construction project, which lasted for six months,was gathered from the traffic incident management systems(TIMS). The travel time data was collected and processed, for each selected freeway and connecting arterial street link,for six months before the start of the resurfacing construction project and six months during the construction of the resurfacing project. Generalized linear models(GLM) were developed and validated for before and during the construction project periods with the average travel time on a link as the dependent variable. Data such as time-of-the-day, dayof-the-week, the distance of a link from the work zone, subject link characteristics, and upstream and downstream link characteristics were collected and used as the predictor variables. The results indicate that the subject link, upstream link and downstream link characteristics have a significant effect on the freeway and connecting arterial street linklevel travel times due to the resurfacing construction project.

Advanced industrial informatics towards smart,safe and sustainable roads:A state of the art

The road is one of the most important civil infrastructures for serving society,where its service quality and life have direct impacts on the safety and comfort of users.Therefore,road construction,condition detection and monitoring,and timely maintenance are particularly important for engineers.Many engineering applications of industrial informatics approaches,like image processing technology,widely used computer-based algorithms,and advanced sensors,have been initially and gradually applied to roads.This state-of-the-art review first summarized the research on industrial applications of advanced information technologies in recent years,while analyzing and comparing the advantages and disadvantages of each technology.Especially,five topics were focused on road construction,road maintenance with decision strategy,road structure evaluation,smart sensing in the road,and cooperative vehicle infrastructure system.It is expected that advanced industrial informatics can help engineers promote the development of smart,safe,and sustainable roads.

PERTURBATION SOLUTION FOR THERMAL EXPANSION BUCKLING OF NO EXPANSION JOINT SLOPE PAVEMENT PLATE

The mechanical mechanism of thermal expansion buckling of no expansion joint slope pavement undergoing the action of a temperature field was analyzed. By using the regular perturbation method, the formula of perturbation solution for this problem was derived, the relationship between critical laying temperature difference of slope pavement and of level straight pavement was studied, and the unified solution as well as its numerical results was also obtained. In terms of this research, the reasonable laying temperature of no expansion joint slope pavement was given.

Effect of performed operations management on the amount of sediment production in natural forests

The present study on the sediment production in natural forests was carried out on an 13,284 ha area,ocated in Guilan Province, in the north of Iran. This area is under intensive management. We first analyzed the physi- sal factors of the area. Then, the amount of road construction, afforestation and harvested wood volume, as well as the harvesting method in the region were determined for the years between 1993 and 2010. The results show that the aver- age annual amount of sediment production in the entire region, over this 18-year period, has increased annually at a rate of 3.54 t.km-2 （R2 = 0.56） at a confidence level of 95%. Operations management and management methods used in ：his forest area has affected the amount of sediment production. Clear cutting and extensive harvesting methods in the region caused an increase in the amount of sediment production, as indicated by a coefficient of determination of 0.71, mplying that forest management may be considered effective and in harmony with the environment.