Effect of Irrigation and Rainfall on Water Consumption Characteristics and Yield of High Yield Highland Barley in Tibet River Valley

This paper was to study the effect of irrigation and rainfall on water consumption characteristics and yield of high yield highland barley in Tibet river valley.In pots, highland barley-25 of Tibet was used as the test material to provide eight water stress treatments： normal water, slight water stress, middle water stress, and severe water stress in two environmental conditions（the whole growth period water stress and the rainwater irrigation after filling stage）. Test results indicated that water consumption increased with soil water rise. The maximum consumption of water was at the joining stage and filling stage. And then, the results showed that under rainwater irrigation treatment, the more the soil moisture was, the more the water consumption was. The water stress in whole highland barely growth period reduced biomass and yield. Compared with that of normal water treatment, biomass of slight water stress, middle water stress and severe water stress treatment was decreased by 29.9%, 41.7% and 47.6%, respectively, and yield of the three treatments was decreased by 15.8%, 43.7% and 57.2%, respectively. But rainfall after filling stage was beneficial to biomass and yield of highland barely. Compared with water stress on whole growth period, the biomass and yield of rainfall treatments after the filling stage were increased by 13%, 75.8%, 128.1%, 157.8% and 42.8%, 84%, 201.6%,and 269.5%. The results indicated that biomass and yield of rainwater irrigation after the filling stage had compensatory effect for highland barley growth under water stress, and could improve the water use efficiency. Therefore, properly rainwater usage is beneficial to the increase of yield and water use efficiency of Tibet highland barley-25 under water stress.

Design aspect of a novel L-shaped pulsed column for liquid–liquid extraction applications: Energy consumption and the characteristics velocity concept

This article deals with the evaluation of the consumption of energy for a steady state solvent extraction in a novel L-shaped pulsed sieve-plate column, which is highly required for design and optimization of the periodic flow processes for industrial applications. In this regard, a comprehensive evaluation on the energy consumption in case of a pulsed flow for three different chemical systems is conducted and besides the influence of pulsation intensity, the effect of geometrical parameters including the plate spacing and the plate free area is investigated as well. Moreover, the concept of characteristic velocity models at flooding points is evaluated with respect to the variation of pressure drop along the column at different operational conditions.

Effects of Tillage Practices on Water Consumption, Water Use Efficiency and Grain Yield in Wheat Field

Water shortage is a serious issue threatening the sustainable development of agriculture in the North China Plain, with the winter wheat （Triticum aestivum L.） as its largest water-consuming crop. The effects of tillage practices on the water consumption and water use efifciency （WUE） of wheat under high-yield conditions using supplemental irrigation based on testing soil moisture dynamic change were examined in this study. This experiment was conducted from 2007 to 2010, with ifve tillage practice treatments, namely, strip rotary tillage （SR）, strip rotary tillage after subsoiling （SRS）, rotary tillage （R）, rotary tillage after subsoiling （RS）, and plowing tillage （P）. The results showed that in the SRS and RS treatments the total water and soil water consumptions were 11.81, 25.18%and 12.16, 14.75%higher than those in SR and R treatments, respectively. The lowest ratio of irrigation consumption to total water consumption in the SRS treatment was 18.53 and 21.88%for the 2008-2009 and 2009-2010 growing seasons, respectively. However, the highest percentage of water consumption was found in the SRS treatment from anthesis to maturity. No signiifcant difference was found between the WUE of the lfag leaf at the later iflling stage in the SRS and RS treatments, but the lfag leaf WUE at these stages were higher than those of other treatments. The SRS and RS treatments exhibited the highest grain yield （9 573.76 and 9 507.49 kg ha-1 for 3-yr average） with no signiifcant difference between the two treatments, followed by P, R and SR treatments. But the SRS treatment had the highest WUE. Thus, the 1-yr subsoiling tillage, plus 2 yr of strip rotary planting operation may be an efifcient measure to increase wheat yield and WUE.

Natural gas consumption forecasting model based on coal-to-gas project in China

Natural gas is widely used because it is environmentally friendly,particularly in reducing carbon emission and improving the Air Quality Index(AQI)around densely populated cities.China has initiated a coal-to-gas project(CGP)to improve the air quality in northern China.As a subcompany of China National Petroleum Corporation,PetroChina Natural Gas Marketing North Company has been focusing on natural gas resource allocation while considering numerous issues such as ensuring the bottom line of livelihood requirements in winter and the performance of economic indicators for an entire calendar year in the northern part of China.Therefore,the accurate prediction of natural gas consumption is important to PetroChina Natural Gas Marketing North Company.It has become a challenge to forecast natural gas consumption because the natural gas market has changed considerably because of the CGP.Natural gas consumption cannot be forecasted using conventional models.This study analyzes the characteristics of the CGP based on the data obtained from rural individual users and company users.Based on the analysis,the gas consumption in winter is predicted using two different forecasting approaches.The methods presented in this paper provide a basis for formulating effective measures for natural gas scheduling in the northern part of China.

Effects of rotor and stator geometry on dissolution process and power consumption in jet-flow high shear mixers

The jet-flow high shear mixer(JF-HSM)is a new type of intensified equipment with special configurations of the rotor and the stator.The mass transfer property and power consumption were studied in the solid-liquid system for a series of JF-HSMs involving different configuration parameters,such as rotor diameter,rotor blade inclination,rotor blade bending direction,stator diameter,and stator bottom opening diameter.The flow characteristics were examined by computational fluid dynamic simulations.Results indicate that the turbulent power consumption of the JF-HSM is affected by the change in rotor blade inclination and stator bottom opening.With the increase in the shear head size and the change in the rotor into a backward-curved blade,the solid-liquid mass transfer rate can be remarkably increased under the same input power.Dimensionless correlations for the mass transfer coefficient and power consumption were obtained to guide the scale-up design and selection of such a new type of equipment to intensify the overall mixing efficiency.