In contrast to marine deposits, continental deposits in China are characterized by diverse sedimentary types, rapid changes in sedimentary facies, complex lithology, and thin, small sand bodies. In seismic sedimentolo...In contrast to marine deposits, continental deposits in China are characterized by diverse sedimentary types, rapid changes in sedimentary facies, complex lithology, and thin, small sand bodies. In seismic sedimentology studies on continental lacustrine basins, new thinking and more detailed and effective technical means are needed to generate lithological data cubes and conduct seismic geo- morphologic analyses. Based on a series of tests and studies, this paper presents the concepts of time-equivalent seismic attributes and seismic sedimentary bodies and a "four-step approach" for the seismic sedimentologic study of conti- nental basins: Step 1, build a time-equivalent stratigraphic framework based on vertical analysis and horizontal corre- lation of lithofacies, electrofacies, seismic facies, and pale- ontological combinations; Step 2, further build a sedimentary facies model based on the analysis of single- well facies with outcrop, coring, and lab test data; Step 3, convert the seismic data into a lithological data cube reflecting different lithologies by means of seismic tech- niques; and Step 4, perform a time-equivalent attribute analysis and convert the planar attribute into a sedimentary facies map under the guidance of the sedimentary facies model. The whole process, highlighting the verification and calibration of geological data, is an iteration and feedback procedure of geoseismic data. The key technologies include the following: (1) a seismic data-lithology conversion technique applicable to complex lithology, which can convert the seismic reflection from interface types to rock layers; and (2) time-equivalent seismic unit analysis and a time- equivalent seismic attribute extraction technique. Finally, this paper demonstrates the validity of the approach with an example from the Qikou Sag in the Bohai Bay Basin and subsequent drilling results.展开更多
According to the characteristics of sedimentary facies and their vertical associations, sequence association of sedimentary facies can be divided into 2 types and 28 subtypes. The first type(type A)is a sedimentary se...According to the characteristics of sedimentary facies and their vertical associations, sequence association of sedimentary facies can be divided into 2 types and 28 subtypes. The first type(type A)is a sedimentary sequence without volcanic rocks, including 18 subtypes. The second type(type B)is a volcanogenic succession including 10 subtypes. Each subtype may reflect certain filling condition under certain sedimentary environment. Time and space distribution of different types of sequence associations can reflect tectonics that controlled the basin evolution, sedimentary environments and palaeogeography.展开更多
By benchmarking with the iteration of drilling technology,fracturing technology and well placement mode for shale oil and gas development in the United States and considering the geological characteristics and develop...By benchmarking with the iteration of drilling technology,fracturing technology and well placement mode for shale oil and gas development in the United States and considering the geological characteristics and development difficulties of shale oil in the Jiyang continental rift lake basin,East China,the development technology system suitable for the geological characteristics of shale oil in continental rift lake basins has been primarily formed through innovation and iteration of the development,drilling and fracturing technologies.The technology system supports the rapid growth of shale oil production and reduces the development investment cost.By comparing it with the shale oil development technology in the United States,the prospect of the shale oil development technology iteration in continental rift lake basins is proposed.It is suggested to continuously strengthen the overall three-dimensional development,improve the precision level of engineering technology,upgrade the engineering technical indicator system,accelerate the intelligent optimization of engineering equipment,explore the application of complex structure wells,form a whole-process integrated quality management system from design to implementation,and constantly innovate the concept and technology of shale oil development,so as to promote the realization of extensive,beneficial and high-quality development of shale oil in continental rift lake basins.展开更多
A large quantity of drilling core, paleontology, geochemistry and geophysics data revealed several features of the Jiyang subbasin during the deposition of the Ekl-ES4x members: (1) the paleotopography of the gentl...A large quantity of drilling core, paleontology, geochemistry and geophysics data revealed several features of the Jiyang subbasin during the deposition of the Ekl-ES4x members: (1) the paleotopography of the gentle slope belt had an extremely low gradient; (2) the paleoclimate frequently alternated between dry and wet periods in a generally arid setting; (3) there was strong weathering around the periphery of the basin; (4) the lake was very shallow; (5) the lake level frequently rose and fell; and (6) the sedimentary environment of the gentle slope belt was an over- flooding lake. All of these factors provided favorable geological conditions for the development of an over-flooding lake delta. The lithologies of the continental over-flooding lake delta deposits are complex and diverse. The compositional maturity is moderate to low, and the grain size distribution curves and sedimentary structures indicate the presence of both gravity and traction currents. The sedimentary microfacies associations consist of a combination of ordered superposition of flood channels, distributary channels and sheet sands. The delta exhibits a weak foreset seismic reflection. The over-flooding lake delta deposits are laterally extensive. The sandstone content is high, and the individual sandstone beds are thin. The flood channel and distributary channel deposits exhibit evidence of bifurcation and lateral migration. The distribution of the sandbodies and the oxidation color of the mudstones provide evidence of cyclic deposition. The paleoclimate was the dominant factor controlling the development of the over-flooding lake delta. Due to the frequently alternating wet and dry paleoclimates, the over-flooding lake delta is characterized by the development of a broad upper plain and a lower delta plain. The upper delta plain is characterized by flood channel deposits, whereas the lower delta plain is represented by distributary channel deposits. The transition zone is characterized by the interaction of flood channels and distributary channels. Due to fault activity, the sandbodies of the over-flooding lake delta were juxtaposed against hydrocarbon source rocks, which was favorable for the development of lithologic reservoirs or structural-lithologic reservoirs. The lower delta plain deposits comprise the most favorable reservoirs.展开更多
Objective Researchers have recently discovered that sublacustrine sedimentary exhalative mechanism associated with volcanism,is the principle way to form lacustrine exhalative rocks.These rocks differentiate themselve...Objective Researchers have recently discovered that sublacustrine sedimentary exhalative mechanism associated with volcanism,is the principle way to form lacustrine exhalative rocks.These rocks differentiate themselves from normal sedimentary rocks in their specificpetrofabric and material composition.展开更多
The conventional lithofacies and facies model of subaerial and marine pyroclastic rocks cannot reflect the characteristics of subaqueous volcanic edifice in lacustrine basins.In order to solve this problem,the lithofa...The conventional lithofacies and facies model of subaerial and marine pyroclastic rocks cannot reflect the characteristics of subaqueous volcanic edifice in lacustrine basins.In order to solve this problem,the lithofacies of subaqueous eruptive pyroclastic rocks is discussed and the facies model is established by taking the tuff cone of Cretaceous Huoshiling Formation in the Chaganhua area of the Changling fault depression,Songliao Basin as the research object.The results indicate that the subaqueous eruptive pyroclastic rocks in the Songliao Basin can be divided into two facies and four subfacies.The two facies are the subaqueous explosive facies and the volcanic sedimentary facies that is formed during the eruption interval.The subaqueous explosive facies can be further divided into three subfacies:gas-supported hot pyroclastic flow subfacies,water-laid density current subfacies and subaqueous fallout subfacies.The volcanic sedimentary facies consists of pyroclastic sedimentary rocks containing terrigenous clast subfacies.A typical facies model of the tuff cone that is formed by subaqueous eruptions in the Songliao Basin was established.The tuff cone is generally composed of multiple subaqueous eruption depositional units and can be divided into two facies associations:near-source facies association and far-source facies association.The complete vertical succession of one depositional unit of the near-source facies association is composed of pyroclastic sedimentary rocks containing terrigenous clast subfacies,gas-supported hot pyroclastic flow subfacies,water-laid density current subfacies and subaqueous fallout subfacies from bottom to top.The depositional unit of the far-source facies association is dominated by the subaqueous fallout subfacies and contains several thin interlayered deposits of the water-laid density current subfacies.The gas-supported hot pyroclastic flow subfacies and the pyroclastic sedimentary rocks containing terrigenous clast subfacies are favorable subaqueous eruptive facies for reservoirs in continental lacustrine basins.展开更多
Based on the typical dissection of various onshore tight oil fields in China,the tight oil migration and accumulation mechanism and enrichment-controlling factors in continental lake basins are analyzed through nuclea...Based on the typical dissection of various onshore tight oil fields in China,the tight oil migration and accumulation mechanism and enrichment-controlling factors in continental lake basins are analyzed through nuclear magnetic resonance(NMR)displacement physical simulation and Lattice Boltzmann numerical simulation by using the samples of source rock,reservoir rock and crude oil.In continental lake basins,the dynamic forces driving hydrocarbon generation and expulsion of high-quality source rocks are the foundational power that determines the charging efficiency and accumulation effect of tight oil,the oil migration resistance is a key element that influences the charging efficiency and accumulation effect of tight oil,and the coupling of charging force with pore-throat resistance in tight reservoir controls the tight oil accumulation and sweet spot enrichment.The degree of tight oil enrichment in continental lake basins is controlled by four factors:source rock,reservoir pore-throat size,anisotropy of reservoir structure,and fractures.The high-quality source rocks control the near-source distribution of tight oil,reservoir physical properties and pore-throat size are positively correlated with the degree of tight oil enrichment,the anisotropy of reservoir structure reveals that the parallel migration rate is the highest,and intralayer fractures can improve the migration and accumulation efficiency and the oil saturation.展开更多
The Fushan Depression is a half-graben rifted sub-basin located in the southeast of the Beibuwan Basin, South China Sea. The Paleogene Liushagang sequence is the main hydrocarbon-bearing stratigraphic unit in the sub-...The Fushan Depression is a half-graben rifted sub-basin located in the southeast of the Beibuwan Basin, South China Sea. The Paleogene Liushagang sequence is the main hydrocarbon-bearing stratigraphic unit in the sub-basin. Using three-dimensional(3-D)seismic data and logging data over the sub-basin, we analyzed structural styles and sedimentary characteristics of the Liushagang sequence. Five types of structural styles were defined: ancient horst, traditional slope, flexure slope-break, faulted slope-break and multiple-stage faults slope, and interpretations for positions, background and development formations of each structural style were discussed. Structural framework across the sub-basin reveals that the most remarkable tectonic setting is represented by the central transfer zone(CTZ) which divides the sub-basin into two independent depressions, and two kinds of sequence architectures are summarized:(i) the western multi-stage faults slope;(ii) the eastern flexure slope break belt. Combined with regional stress field of the Fushan Depression, we got plane combinations of the faults, and finally built up plan distribution maps of structural system for main sequence. Also, we discussed the controlling factors mainly focused on subsidence history and background tectonic activities such as volcanic activity and earthquakes. The analysis of structural styles and tectonic evolution provides strong theoretical support for future prospecting in the Fushan subbasin and other similar rifted basins of the Beibuwan Basin in South China Sea.展开更多
Taking lake basin shales of the Triassic Yanchang Formation in the Ordos Basin,NW China and the Cretaceous Qingshankou Formation in the Songliao Basin,NE China as research objects,the characteristics and origins of di...Taking lake basin shales of the Triassic Yanchang Formation in the Ordos Basin,NW China and the Cretaceous Qingshankou Formation in the Songliao Basin,NE China as research objects,the characteristics and origins of different types of silica in the shales have been studied by means of core observation,thin section identification,cathodoluminescence,X-ray diffraction analysis,scanning electron microscope(SEM),electron probe and rock pyrolysis.The results shows that the origins of silica include felsic mineral dissolution,tuffite devitrification,clay mineral transformation and siliceous mineral metasomatism.The silica formed by feldspar dissolution commonly appears as spots and veins,with low degree of crystallization,and is largely aqueous opal mineral,with an average Si O2 content of 67.2%.Silica formed by devitrification of tuffite mainly occurs in two forms,amorphous silica and authigenic quartz with better crystal shape.The authigenic silica formed during the transformation of clay minerals is embedded in the clay minerals in the form of micron-scale plates and small flakes,or mixed with clay minerals in a dispersed state.The authigenic quartz formed by siliceous mineral metasomatism is in better angular crystal shape,and has an average Si O2 content of 87%.The authigenic siliceous mineral content is positively correlated with the content of terrigenous felsic minerals.The pressure solution of felsic minerals is the main source of authigenic siliceous minerals,followed by the transformation of clay minerals,and the organic matter has some boost on the formation of authigenic silica.The authigenic siliceous materials of different origins have different geological characteristics and occurrence states from terrigenous quartz,which would affect the storage performance,seepage capacity and fracturing effect of continental shale.Although the organic-rich shale has high silica content,different from terrigenous quartz,authigenic silica in this kind of shale mostly floats and disperse in clay minerals,which would have negative effect on the formation of complex fractures in fracturing,fracture support ability after fracturing,and formation of effective seepage channels.Calculating the brittleness index of shale intervals only based on the composition of brittle minerals cannot accurately characterize mechanical characteristics of continental shale oil reservoirs,and would affect comprehensive evaluation and selection of continental shale oil“sweet spots”.展开更多
Continental extensional basin is one of the most important oil and ga s bearing basin types in the world and is main basin type in east China. The qu antitative analysis for this kind of basins has important significa...Continental extensional basin is one of the most important oil and ga s bearing basin types in the world and is main basin type in east China. The qu antitative analysis for this kind of basins has important significance for oil a nd gas exploration and development in east China. Sedimentary basin is a geodyna mic system including sedimentary basin itself, the crust and the mantle under it . Basin evolution is affected by regional structure stress field geophysical sta tus in the deep of the earth and outer condition, such as climate changes, water supplying etc. Based on the concept of basin dynamic system, the authors develo ped a geological process modeling and analyzing system-Continental Extensional B asin Quantitative Analysis System (CEBQAS). The system consists of basin geodyna mic modeling, structural modeling, sedimentary modeling, geologic analysis, data base and display subsystem. The system can reappear structural and sedimentary e volution history to an extent and provide basin geodynamic information as well a s retrieving parameter for modeling from original data such as logging, core an d seismic data .展开更多
In response to the problems of unclear distribution of deep-water pre-salt carbonate reservoirs and formation conditions of large oil fields in the Santos passive continental margin basin,based on comprehensive utiliz...In response to the problems of unclear distribution of deep-water pre-salt carbonate reservoirs and formation conditions of large oil fields in the Santos passive continental margin basin,based on comprehensive utilization of geological,seismic,and core data,and reconstruction of Early Cretaceous prototype basin and lithofacies paleogeography,it is proposed for the first time that the construction of pre-salt carbonate build-ups was controlled by two types of isolated platforms:inter-depression fault-uplift and intra-depression fault-high.The inter-depression fault-uplift isolated platforms are distributed on the present-day pre-salt uplifted zones between depressions,and are built on half-and fault-horst blocks that were inherited and developed in the early intra-continental and inter-continental rift stages.The late intra-continental rift coquinas of the ITP Formation and the early inter-continental rift microbial limestones of the BVE Formation are continuously constructed;intra-depression fault-high isolated platforms are distributed in the current pre-salt depression zones,built on the uplifted zones formed by volcanic rock build-ups in the early prototype stage of intra-continental rifts,and only the BVE microbial limestones are developed.Both types of limestones formed into mound-shoal bodies,that have the characteristics of large reservoir thickness and good physical properties.Based on the dissection of large pre-salt oil fields discovered in the Santos Basin,it has been found that both types of platforms could form large-scale combined structural-stratigraphic traps,surrounded by high-quality lacustrine and lagoon source rocks at the periphery,and efficiently sealed by thick high-quality evaporite rocks above,forming the optimal combination of source,reservoir and cap in the form of“lower generation,middle storage,and upper cap”,with a high degree of oil and gas enrichment.It has been found that the large oil fields are all bottom water massive oil fields with a unified pressure system,and they are all filled to the spill-point.The future exploration is recommended to focus on the inter-depression fault-uplift isolated platforms in the western uplift zone and the southern section of eastern uplift zones,as well as intra-depression fault-high isolated platforms in the central depression zone.The result not only provides an important basis for the advanced selection of potential play fairways,bidding of new blocks,and deployment of awarded exploration blocks in the Santos Basin,but also provides a reference for the global selection of deep-water exploration blocks in passive continental margin basins.展开更多
In Northern China, sandstone-type uranium (U) deposits are mostly developed in Mesozoic-Cenozoic basins. These U deposits are usually hosted in unvarying horizons within the basins and exhibit typical U-forming sedi...In Northern China, sandstone-type uranium (U) deposits are mostly developed in Mesozoic-Cenozoic basins. These U deposits are usually hosted in unvarying horizons within the basins and exhibit typical U-forming sedimentary associations, which is referred to as U-bearing rock series. This study describes the structural features of U-bearing rock series within the main Mesozoic-Cenozoic U-producing continental basins in Kazakhstan, Uzbekistan, and Russia in the western segment of the Central Asian Metallogenic Belt (CAMB), and Northern China in the eastern segment of the CAMB. We analyze the basic structural conditions and sedimentary environments of U-bearing rock series in Northern China and classify their structural styles in typical basins into river valley, basin margin, and intrabasin uplift margin types. The intrabasin uplift margin structural style proposed in this study can be used to indicate directions for the exploration of sandstone-type U deposits hosted in the center of a basin. At the same time, the study of structural style provides a new idea for exploring sandstone-type U deposits in Mesozoic-Cenozoic basins and it is of great significance to prospecting of sandstone-type uranium deposits.展开更多
Paleoproterozoic granitoids are an important constituent of the Jiao-Liao-Ji Belt(JLJB). The spatial-temporal distribution and types of Paleoproterozoic granitoids are closely related to the evolution of the JLJB. In ...Paleoproterozoic granitoids are an important constituent of the Jiao-Liao-Ji Belt(JLJB). The spatial-temporal distribution and types of Paleoproterozoic granitoids are closely related to the evolution of the JLJB. In this paper, we review the field occurrence, petrography, geochronology, and geochemistry of Paleoproterozoic granitoids on Liaodong Peninsula, northeast China. The Paleoproterozoic granitoids can be divided into pre-tectonic(~2.15 Ga;peak age=2.18 Ga) and post-tectonic(~1.85 Ga) granitoids. The pre-tectonic granitoids are magnetite and hornblende-biotite monzogranites and granodiorites. Pre-tectonic monzogranites are widespread in the JLJB and have A2-type affinities. In contrast, pretectonic granodiorites are only present in the Simenzi area and have adakitic affinities. The post-tectonic granitoids consist of porphyritic monzogranite, syenite, diorite, granodiorite, quartz monzonite, monzogranite, and granitic pegmatite, which are adakitic rocks and I-, S-, and A2-type granitoids. The assemblage of pre-tectonic A2-type granitoids and adakitic rocks indicates the initial tectonic setting of the JLJB was a continental back-arc basin. The assemblage of post-tectonic adakitic rocks and I-, S-, and A2-type granitoids indicates a post-collisional setting. The 2.20-2.15 Ga A2-type granitoids and adakitic rocks were associated with the initial stage of back-arc extension, and the peak of back-arc extension is inferred from the subsequent(2.15-2.10 Ga) mafic intrusive activity. The ~1.90 Ga adakitic rocks mark the beginning of the postcollisional stage, which was followed by the intrusion of low-temperature S-and I-type granitoids. High-to low-pressure granitoids(S-type) were generated during the peak of post-collisional lithospheric delamination and asthenospheric upwelling. The emplacement of later granitic pegmatites occurred during the waning of the orogeny.展开更多
Aeromagnetic anomaly zonation of the Ordos Basin and adjacent areas was obtained by processing high-precision and large-scale aeromagnetic anomalies with an approach of reduction to the pole upward continuation. Compa...Aeromagnetic anomaly zonation of the Ordos Basin and adjacent areas was obtained by processing high-precision and large-scale aeromagnetic anomalies with an approach of reduction to the pole upward continuation. Comparative study on aeromagnetic and seismic tomography suggests that aeromagnetic anomalies in this area are influenced by both the magnetic property of the rock and the burial depth of the Precambrian crystalline basement. Basement depth might be the fundamental control factor for aeromagnetic anomalies because the positive and negative anomalies on the reduction to the pole- upward-continuation anomaly maps roughly coincide with the uplifts and depressions of the crystalline basement in the basin. The results, together with the latest understanding of basement faults, SHRIMP U-Pb zircon dating of metamorphic rock and granite, drilling data, detrital zircon ages, and gravity data interpretation, suggest that the Ordos block is not an entirety of Archean.展开更多
Tectonic movements in the North Slope of Biyang Depression are comparatively mild and stable, thus generating two categories of deltas. Elementary reasons for the coexistence of deltas are the existence of the palaeod...Tectonic movements in the North Slope of Biyang Depression are comparatively mild and stable, thus generating two categories of deltas. Elementary reasons for the coexistence of deltas are the existence of the palaeodrainage pattern and the effect of palaeotopography. The sedimentary facies is the most elementary factor controlling the physical property of reservoirs. The layout and spatial combination model of the sand body and faults are the major influential factors on the occurrence of hydrocarbons. Comparative study on Houzhang and Yanglou Braided Deltas as well as Zhangchang and Gucheng Meandering Deltas suggests that the hydrocarbons distribute primarily in the mouth bar subfacies and secondarily in the distal bar subfacies of the braided delta, while the oil-water and aqueous layers are mainly found in the subaquatic distributary channel. Although the sand body of the meandering delta has excellent stratification and high porosity, the thickness is far less than that of the braided delta. Therefore, the yield of hydrocarbon is relatively low. The mudstone of the delta front subfacies is a kind of source rock with a high content of organic matter. The conducting system for oil/gas migration in the North Slope is a composite one comprising faults and sand- stone reservoirs. A large amount of oil/gas from the deep depression first migrated towards the slope along the sand body which stretches and connects with the source rocks, and then redistributed along the faults in the slope. After the movement reached a standstill, the faults formed the occlusion in the up-dip direction of the sand body, generating a great quantity of fault block hydrocarbon reservoirs in the Noah Slope.展开更多
According to the ideas and concepts of systems dynamic of continent structure, using previous information related to the study area, combining analyses on orogenic belt, basin and magmatic rock, the present paper synt...According to the ideas and concepts of systems dynamic of continent structure, using previous information related to the study area, combining analyses on orogenic belt, basin and magmatic rock, the present paper synthesizes the tectono - sedimentary development of southeastern coast region, China, with special emphasis on the mountain making, basining and magmatic activity. The tectonic evolution after Late Caledonian orogeny was dominated by alternating rifting and converging, subsiding and uplifting, mountain making and basining in central and southern parts of southeastern China and the adjacent regions to the east and west. Seventeen geologic events , nine events of plate or terrain convergence , and continental crust accretion , as well as eight events of intracontinental rifting and basin faulting , are closely related to the tectonic and sedimentary evolution of the study area . The accompanied intense and frequent sedimentation , folding , faulting , magmatism and ore- forming process allowed huge coal , multimetal and potential petroleum source rocks to form in local depressions throughout the Caledonian to Himalavan time .展开更多
Continental rifting and magmatism has been extensively studied worldwide as it is believed that continental rifting, break up of continents and associated magmatism lead to genesis of new oceanic crust. However, vario...Continental rifting and magmatism has been extensively studied worldwide as it is believed that continental rifting, break up of continents and associated magmatism lead to genesis of new oceanic crust. However, various regions of the world show that these processes may lead to genesis of other types of crust than the oceanic crust. Laxmi Basin in the western continental margin of the India is one such region with an enigmatic crust.Due to its extreme strategic significance for the palaeogeographic reconstruction of continents during Cretaceous continental breakup of India, this basin has attracted various workers for more than two decades. However, still the issue of nature of crust in the basin remains controversial. In this contribution, in order to identify nature of crust, mechanism of continental extension in the Laxmi Basin has been studied for the first time through newly acquired seismic data from the basin. Here, we propose a plausible mechanism of crustal extension in the Laxmi Basin which eventually constrains the nature of crust of the Laxmi Basin. We have demonstrated that the crust in the Laxmi Basin can be categorised in two zones of stretched and transitional crust. In the stretched zone several fault bounded horst and graben structures are identified which preserve syn- and post-rift sediments along with different periods of hiatus in sedimentations as unconformities. These faults are identified as listric faults in the upper crust which sole out in the detachment faults.Detachment faults decouples the upper brittle and lower ductile crust. The transitional crust is identified as heavily intruded by sills and basaltic volcanic which were emplaced due to melting of subcontinental mantle(SCM) after hyper-stretching of crust and serpentinisation of the SCM. Panikkar Ridge is proposed to be one such basaltic volcanic body derived from melting of lower part of the SCM.展开更多
The Shilu Fe-polymetallic ore deposit,a famous hematite-rich Fe-ore deposit,is situated at the western Hainan Province of south China.The deposit characterizes the upper Fe ores and the lower Co-Cu ores,which are main...The Shilu Fe-polymetallic ore deposit,a famous hematite-rich Fe-ore deposit,is situated at the western Hainan Province of south China.The deposit characterizes the upper Fe ores and the lower Co-Cu ores,which are mainly hosted within a low-grade to medium-grade,dominantly submarine metamorphosed siliciclastic and carbonate sedimentary succession of the Neoproterozoic Shilu Group.Three facies types of metamorphosed BIFs,i.e.the oxide facies,the silicate-oxide facies and the sulfide-carbonate facies BIFs,are identified within the sixth sequence of the Shilu Group.The oxide facies BIF(i.e.the Fe-rich itabirites or ores)consists of alternating hematite-rich microbands with quartz-rich microbands;the silicate-oxide facies BIF(i.e.the Fe-poor itabirites or ores)comprises alternating millimeter-to a few tens meter-scale,magnetite-hematite-rich bands with calcsilicate-rich(garnet+actinolite+diopside+epidote+quartz)meso-to microbands;and the sulfide-carbonate facies BIF(i.e.the Co-Cu ores)contains alternating macro-to mesobands of Co-bearing pyrite and pyrrhotite,and chalcopyrite with mesobands of dolomite+calcite+diopside+quartz and/or chlorite+sericite+quartz.The blastooolitic,blastopelletoid blastocolloidal and blastopsammitic textures,and blasobedding structures which most likely represent primary sedimentation are often observed in these BIF facies.The interbedded host rocks with the BIFs mainly are the pyroxene-amphibole rocks and the banded or impure dolostones,and also contain banded or laminated structures,and lepido-gra-noblastic,nematoblastic and/or blastoclastic textures.Compositionally,the main host rocks,the pyroxene-amphibole rocks contain basic-intermediate SiO_2(~54.00 wt.%),CaO(~14.19 wt.%),MgO(~9.68 wt.%)and Al_2O_3(~8.49 wt.%)with a positive correlation between Al_2O_3 and TiO_2.The UCC-like Zr and Hf abundances,high Ba content andεNd(t)value(^-5.99)as well as the ratios of La/YbPAAS(0.17~1.00),δEuPAAS(0.88~1.12)andδCePAAS(0.93~1.13)commonly reveal that the protoliths to this type rocks are hydrogenic with a large contribution of terrigenous sediments and minor hydrothermal input.The high CaO+MgO+LOI contents and the extremely low trace element and REEconcentrations as well as the ratios of Y/Ho(44~45),δEuPAAS(1.13~1.57)andδCePAAS(0.69~0.98)reflect a marine origin with minor terrigenous materials for the banded or impure dolostones.Moreover,this type rocks also account for a negativeεNd(t)value(^-7.49).The oxide facies BIF is dominated by Fe_2O_3+FeO(~75.59wt.%)and SiO_2(~20.47 wt.%)with aεNd(t)value of^-6.10.The variable contents in Al_2O_3,TiO 2,K2O,Na2O,Zr,Hf and∑REE,and variable ratios of Y/Ho(24~39)andδEuPAAS(0.86~11.07)suggest the precursor sediments to this facies BIF are admixtures of sea-floor hydrothermal fluids and seawaters with minor involvement of detrital components.Compared to the oxide facies BIF,the silicate-oxide facies BIF is lower in Fe_2O_3+Fe O(~39.81wt.%)and Ba but higher in SiO_2(~42.54 wt.%),Al2O3(~3.60 wt.%),TiO_2(~0.19 wt.%),MgO(~1.12 wt.%),CaO(~9.06 wt.%),K_2O(~0.98 wt.%),Mn and Zr.The ratios of Y/Ho(25~34),La/YbPAAS(0.14-0.74)andδEuPAAS(0.91~1.12)most likely are linked to higher degree of detrital contamintants.While the sulfide-caronate facies BIF is main but variable in Fe_2O_3+Fe O(15.79~57.91 wt.%),SiO 2(0.54~61.52 wt.%),MgO(0.12~16.09wt.%),CaO(0.17~23.41 wt.%)and LOI(8.28-30.06 wt.%).The generally low contents in trace elements(including REE)except for an obvious enrichment in Pb,and the positive Ce anomalies(δCePAAS=1.04~1.95)and negative Pr anomalies(δPrPAAS=0.67~0.93),as well as the variable ratios ofδEuPAAS(0.72~1.71),La/YbPAAS(0.26~1.60)and Y/Ho(26~57)suggest that the precursors to the sulfide-carbonate facies BIF mainly are metalliferious sediments from deep-marine hydrotheral source with minor detrital components.The T2DM ages(ca.2.0 Ga)imply that the Shilu BIFs and interbedded host rocks contain a component with Paleoproterozoic crustal residence age due to a significant crustal accretion event at ca.2.0 Ga in Hainan Island.In connection with the petrographical and mineralogical relationship,we conclude that the precursor precipitates to the Shilu BIFs are variable degree of admixtures of the Fe-Co-Cu-(Si)-rich hydrothermal fluids and detrital components from seawater and fresh water carring continental landmass;whereas the protolith to the main interbedded host rocks,i.e.the pyroxene-amphibole rocks,most likely was terrigenous,fine-grained clastic-sediments but with significant input of hydrothermal fluids in a seawater environment.As a result,a continent marginal marine basin is proposed for deposition of the Shilu BIFs and interbedded host rocks.Sea-level fluctuations caused by marine transgression–regressions possibly contributed to changes in the composition and varied input of the terrigenous sediments.展开更多
基金supported by the Key Scientific and Technological Project‘‘Seismic-Sedimentology Software System Investigation and Application’’of Petro China Company Limited(2012B-3709)
文摘In contrast to marine deposits, continental deposits in China are characterized by diverse sedimentary types, rapid changes in sedimentary facies, complex lithology, and thin, small sand bodies. In seismic sedimentology studies on continental lacustrine basins, new thinking and more detailed and effective technical means are needed to generate lithological data cubes and conduct seismic geo- morphologic analyses. Based on a series of tests and studies, this paper presents the concepts of time-equivalent seismic attributes and seismic sedimentary bodies and a "four-step approach" for the seismic sedimentologic study of conti- nental basins: Step 1, build a time-equivalent stratigraphic framework based on vertical analysis and horizontal corre- lation of lithofacies, electrofacies, seismic facies, and pale- ontological combinations; Step 2, further build a sedimentary facies model based on the analysis of single- well facies with outcrop, coring, and lab test data; Step 3, convert the seismic data into a lithological data cube reflecting different lithologies by means of seismic tech- niques; and Step 4, perform a time-equivalent attribute analysis and convert the planar attribute into a sedimentary facies map under the guidance of the sedimentary facies model. The whole process, highlighting the verification and calibration of geological data, is an iteration and feedback procedure of geoseismic data. The key technologies include the following: (1) a seismic data-lithology conversion technique applicable to complex lithology, which can convert the seismic reflection from interface types to rock layers; and (2) time-equivalent seismic unit analysis and a time- equivalent seismic attribute extraction technique. Finally, this paper demonstrates the validity of the approach with an example from the Qikou Sag in the Bohai Bay Basin and subsequent drilling results.
文摘According to the characteristics of sedimentary facies and their vertical associations, sequence association of sedimentary facies can be divided into 2 types and 28 subtypes. The first type(type A)is a sedimentary sequence without volcanic rocks, including 18 subtypes. The second type(type B)is a volcanogenic succession including 10 subtypes. Each subtype may reflect certain filling condition under certain sedimentary environment. Time and space distribution of different types of sequence associations can reflect tectonics that controlled the basin evolution, sedimentary environments and palaeogeography.
基金Supported by the Strategic Research and Technical Consultation Project of Sinopec Science and Technology CommissionSinopec Major Science and Technology Project(P22037)。
文摘By benchmarking with the iteration of drilling technology,fracturing technology and well placement mode for shale oil and gas development in the United States and considering the geological characteristics and development difficulties of shale oil in the Jiyang continental rift lake basin,East China,the development technology system suitable for the geological characteristics of shale oil in continental rift lake basins has been primarily formed through innovation and iteration of the development,drilling and fracturing technologies.The technology system supports the rapid growth of shale oil production and reduces the development investment cost.By comparing it with the shale oil development technology in the United States,the prospect of the shale oil development technology iteration in continental rift lake basins is proposed.It is suggested to continuously strengthen the overall three-dimensional development,improve the precision level of engineering technology,upgrade the engineering technical indicator system,accelerate the intelligent optimization of engineering equipment,explore the application of complex structure wells,form a whole-process integrated quality management system from design to implementation,and constantly innovate the concept and technology of shale oil development,so as to promote the realization of extensive,beneficial and high-quality development of shale oil in continental rift lake basins.
基金jointly supported by the National Nature Science Foundation of China(No.41402095)the Chinese Postdoctoral Science Foundation(No.2014M550380)+1 种基金National Nature Science Foundation of China(No.U1262203)the Special Foundation of Postdoctoral Innovation Project of Shandong Province
文摘A large quantity of drilling core, paleontology, geochemistry and geophysics data revealed several features of the Jiyang subbasin during the deposition of the Ekl-ES4x members: (1) the paleotopography of the gentle slope belt had an extremely low gradient; (2) the paleoclimate frequently alternated between dry and wet periods in a generally arid setting; (3) there was strong weathering around the periphery of the basin; (4) the lake was very shallow; (5) the lake level frequently rose and fell; and (6) the sedimentary environment of the gentle slope belt was an over- flooding lake. All of these factors provided favorable geological conditions for the development of an over-flooding lake delta. The lithologies of the continental over-flooding lake delta deposits are complex and diverse. The compositional maturity is moderate to low, and the grain size distribution curves and sedimentary structures indicate the presence of both gravity and traction currents. The sedimentary microfacies associations consist of a combination of ordered superposition of flood channels, distributary channels and sheet sands. The delta exhibits a weak foreset seismic reflection. The over-flooding lake delta deposits are laterally extensive. The sandstone content is high, and the individual sandstone beds are thin. The flood channel and distributary channel deposits exhibit evidence of bifurcation and lateral migration. The distribution of the sandbodies and the oxidation color of the mudstones provide evidence of cyclic deposition. The paleoclimate was the dominant factor controlling the development of the over-flooding lake delta. Due to the frequently alternating wet and dry paleoclimates, the over-flooding lake delta is characterized by the development of a broad upper plain and a lower delta plain. The upper delta plain is characterized by flood channel deposits, whereas the lower delta plain is represented by distributary channel deposits. The transition zone is characterized by the interaction of flood channels and distributary channels. Due to fault activity, the sandbodies of the over-flooding lake delta were juxtaposed against hydrocarbon source rocks, which was favorable for the development of lithologic reservoirs or structural-lithologic reservoirs. The lower delta plain deposits comprise the most favorable reservoirs.
基金financially supported by the National Natural Science Foundation of China(grants No.41572097,41472088 and 41002033)the State Scholarship Fund of China Scholarship Council
文摘Objective Researchers have recently discovered that sublacustrine sedimentary exhalative mechanism associated with volcanism,is the principle way to form lacustrine exhalative rocks.These rocks differentiate themselves from normal sedimentary rocks in their specificpetrofabric and material composition.
基金Supported by the National Natural Science Foundation of China (41790453,41972313)。
文摘The conventional lithofacies and facies model of subaerial and marine pyroclastic rocks cannot reflect the characteristics of subaqueous volcanic edifice in lacustrine basins.In order to solve this problem,the lithofacies of subaqueous eruptive pyroclastic rocks is discussed and the facies model is established by taking the tuff cone of Cretaceous Huoshiling Formation in the Chaganhua area of the Changling fault depression,Songliao Basin as the research object.The results indicate that the subaqueous eruptive pyroclastic rocks in the Songliao Basin can be divided into two facies and four subfacies.The two facies are the subaqueous explosive facies and the volcanic sedimentary facies that is formed during the eruption interval.The subaqueous explosive facies can be further divided into three subfacies:gas-supported hot pyroclastic flow subfacies,water-laid density current subfacies and subaqueous fallout subfacies.The volcanic sedimentary facies consists of pyroclastic sedimentary rocks containing terrigenous clast subfacies.A typical facies model of the tuff cone that is formed by subaqueous eruptions in the Songliao Basin was established.The tuff cone is generally composed of multiple subaqueous eruption depositional units and can be divided into two facies associations:near-source facies association and far-source facies association.The complete vertical succession of one depositional unit of the near-source facies association is composed of pyroclastic sedimentary rocks containing terrigenous clast subfacies,gas-supported hot pyroclastic flow subfacies,water-laid density current subfacies and subaqueous fallout subfacies from bottom to top.The depositional unit of the far-source facies association is dominated by the subaqueous fallout subfacies and contains several thin interlayered deposits of the water-laid density current subfacies.The gas-supported hot pyroclastic flow subfacies and the pyroclastic sedimentary rocks containing terrigenous clast subfacies are favorable subaqueous eruptive facies for reservoirs in continental lacustrine basins.
基金Supported by the National Science and Technology Major Project of China(2016ZX05046-001).
文摘Based on the typical dissection of various onshore tight oil fields in China,the tight oil migration and accumulation mechanism and enrichment-controlling factors in continental lake basins are analyzed through nuclear magnetic resonance(NMR)displacement physical simulation and Lattice Boltzmann numerical simulation by using the samples of source rock,reservoir rock and crude oil.In continental lake basins,the dynamic forces driving hydrocarbon generation and expulsion of high-quality source rocks are the foundational power that determines the charging efficiency and accumulation effect of tight oil,the oil migration resistance is a key element that influences the charging efficiency and accumulation effect of tight oil,and the coupling of charging force with pore-throat resistance in tight reservoir controls the tight oil accumulation and sweet spot enrichment.The degree of tight oil enrichment in continental lake basins is controlled by four factors:source rock,reservoir pore-throat size,anisotropy of reservoir structure,and fractures.The high-quality source rocks control the near-source distribution of tight oil,reservoir physical properties and pore-throat size are positively correlated with the degree of tight oil enrichment,the anisotropy of reservoir structure reveals that the parallel migration rate is the highest,and intralayer fractures can improve the migration and accumulation efficiency and the oil saturation.
基金the National Natural Science Foundation of China(NSFC)program(41472084)the China Earthquake Administration,Institute of Seismology Foundation(IS201526246)for providing funding and for allowing publication of this paper
文摘The Fushan Depression is a half-graben rifted sub-basin located in the southeast of the Beibuwan Basin, South China Sea. The Paleogene Liushagang sequence is the main hydrocarbon-bearing stratigraphic unit in the sub-basin. Using three-dimensional(3-D)seismic data and logging data over the sub-basin, we analyzed structural styles and sedimentary characteristics of the Liushagang sequence. Five types of structural styles were defined: ancient horst, traditional slope, flexure slope-break, faulted slope-break and multiple-stage faults slope, and interpretations for positions, background and development formations of each structural style were discussed. Structural framework across the sub-basin reveals that the most remarkable tectonic setting is represented by the central transfer zone(CTZ) which divides the sub-basin into two independent depressions, and two kinds of sequence architectures are summarized:(i) the western multi-stage faults slope;(ii) the eastern flexure slope break belt. Combined with regional stress field of the Fushan Depression, we got plane combinations of the faults, and finally built up plan distribution maps of structural system for main sequence. Also, we discussed the controlling factors mainly focused on subsidence history and background tectonic activities such as volcanic activity and earthquakes. The analysis of structural styles and tectonic evolution provides strong theoretical support for future prospecting in the Fushan subbasin and other similar rifted basins of the Beibuwan Basin in South China Sea.
基金National Natural Science Foundation of China(42072186)Science and Technology Project of Petro China(2021-DJ2203)Scientific Research and Technology Development Project of Petro China(2022KT0302-1)。
文摘Taking lake basin shales of the Triassic Yanchang Formation in the Ordos Basin,NW China and the Cretaceous Qingshankou Formation in the Songliao Basin,NE China as research objects,the characteristics and origins of different types of silica in the shales have been studied by means of core observation,thin section identification,cathodoluminescence,X-ray diffraction analysis,scanning electron microscope(SEM),electron probe and rock pyrolysis.The results shows that the origins of silica include felsic mineral dissolution,tuffite devitrification,clay mineral transformation and siliceous mineral metasomatism.The silica formed by feldspar dissolution commonly appears as spots and veins,with low degree of crystallization,and is largely aqueous opal mineral,with an average Si O2 content of 67.2%.Silica formed by devitrification of tuffite mainly occurs in two forms,amorphous silica and authigenic quartz with better crystal shape.The authigenic silica formed during the transformation of clay minerals is embedded in the clay minerals in the form of micron-scale plates and small flakes,or mixed with clay minerals in a dispersed state.The authigenic quartz formed by siliceous mineral metasomatism is in better angular crystal shape,and has an average Si O2 content of 87%.The authigenic siliceous mineral content is positively correlated with the content of terrigenous felsic minerals.The pressure solution of felsic minerals is the main source of authigenic siliceous minerals,followed by the transformation of clay minerals,and the organic matter has some boost on the formation of authigenic silica.The authigenic siliceous materials of different origins have different geological characteristics and occurrence states from terrigenous quartz,which would affect the storage performance,seepage capacity and fracturing effect of continental shale.Although the organic-rich shale has high silica content,different from terrigenous quartz,authigenic silica in this kind of shale mostly floats and disperse in clay minerals,which would have negative effect on the formation of complex fractures in fracturing,fracture support ability after fracturing,and formation of effective seepage channels.Calculating the brittleness index of shale intervals only based on the composition of brittle minerals cannot accurately characterize mechanical characteristics of continental shale oil reservoirs,and would affect comprehensive evaluation and selection of continental shale oil“sweet spots”.
文摘Continental extensional basin is one of the most important oil and ga s bearing basin types in the world and is main basin type in east China. The qu antitative analysis for this kind of basins has important significance for oil a nd gas exploration and development in east China. Sedimentary basin is a geodyna mic system including sedimentary basin itself, the crust and the mantle under it . Basin evolution is affected by regional structure stress field geophysical sta tus in the deep of the earth and outer condition, such as climate changes, water supplying etc. Based on the concept of basin dynamic system, the authors develo ped a geological process modeling and analyzing system-Continental Extensional B asin Quantitative Analysis System (CEBQAS). The system consists of basin geodyna mic modeling, structural modeling, sedimentary modeling, geologic analysis, data base and display subsystem. The system can reappear structural and sedimentary e volution history to an extent and provide basin geodynamic information as well a s retrieving parameter for modeling from original data such as logging, core an d seismic data .
基金Supported by the National Science and Technology Major Project(2016ZX05029001)CNPC Science and Technology Project(2019D-4310)。
文摘In response to the problems of unclear distribution of deep-water pre-salt carbonate reservoirs and formation conditions of large oil fields in the Santos passive continental margin basin,based on comprehensive utilization of geological,seismic,and core data,and reconstruction of Early Cretaceous prototype basin and lithofacies paleogeography,it is proposed for the first time that the construction of pre-salt carbonate build-ups was controlled by two types of isolated platforms:inter-depression fault-uplift and intra-depression fault-high.The inter-depression fault-uplift isolated platforms are distributed on the present-day pre-salt uplifted zones between depressions,and are built on half-and fault-horst blocks that were inherited and developed in the early intra-continental and inter-continental rift stages.The late intra-continental rift coquinas of the ITP Formation and the early inter-continental rift microbial limestones of the BVE Formation are continuously constructed;intra-depression fault-high isolated platforms are distributed in the current pre-salt depression zones,built on the uplifted zones formed by volcanic rock build-ups in the early prototype stage of intra-continental rifts,and only the BVE microbial limestones are developed.Both types of limestones formed into mound-shoal bodies,that have the characteristics of large reservoir thickness and good physical properties.Based on the dissection of large pre-salt oil fields discovered in the Santos Basin,it has been found that both types of platforms could form large-scale combined structural-stratigraphic traps,surrounded by high-quality lacustrine and lagoon source rocks at the periphery,and efficiently sealed by thick high-quality evaporite rocks above,forming the optimal combination of source,reservoir and cap in the form of“lower generation,middle storage,and upper cap”,with a high degree of oil and gas enrichment.It has been found that the large oil fields are all bottom water massive oil fields with a unified pressure system,and they are all filled to the spill-point.The future exploration is recommended to focus on the inter-depression fault-uplift isolated platforms in the western uplift zone and the southern section of eastern uplift zones,as well as intra-depression fault-high isolated platforms in the central depression zone.The result not only provides an important basis for the advanced selection of potential play fairways,bidding of new blocks,and deployment of awarded exploration blocks in the Santos Basin,but also provides a reference for the global selection of deep-water exploration blocks in passive continental margin basins.
基金supported by the undertaken units of subprojects of the Program of Survey on Sandstone-Type Uranium Deposits in Northern Chinathe Ministry of Science and Technology of China(Grant 2015CB453000)the Geological Survey project of China(Grant No.DD20160128)
文摘In Northern China, sandstone-type uranium (U) deposits are mostly developed in Mesozoic-Cenozoic basins. These U deposits are usually hosted in unvarying horizons within the basins and exhibit typical U-forming sedimentary associations, which is referred to as U-bearing rock series. This study describes the structural features of U-bearing rock series within the main Mesozoic-Cenozoic U-producing continental basins in Kazakhstan, Uzbekistan, and Russia in the western segment of the Central Asian Metallogenic Belt (CAMB), and Northern China in the eastern segment of the CAMB. We analyze the basic structural conditions and sedimentary environments of U-bearing rock series in Northern China and classify their structural styles in typical basins into river valley, basin margin, and intrabasin uplift margin types. The intrabasin uplift margin structural style proposed in this study can be used to indicate directions for the exploration of sandstone-type U deposits hosted in the center of a basin. At the same time, the study of structural style provides a new idea for exploring sandstone-type U deposits in Mesozoic-Cenozoic basins and it is of great significance to prospecting of sandstone-type uranium deposits.
基金financially supported by the 3D Geological Mapping and Deep Geological Survey of the China Geological Survey under a pilot project entitled Deep Geological Survey of the Benxi–Linjiang Area (Project No. 1212011220247)
文摘Paleoproterozoic granitoids are an important constituent of the Jiao-Liao-Ji Belt(JLJB). The spatial-temporal distribution and types of Paleoproterozoic granitoids are closely related to the evolution of the JLJB. In this paper, we review the field occurrence, petrography, geochronology, and geochemistry of Paleoproterozoic granitoids on Liaodong Peninsula, northeast China. The Paleoproterozoic granitoids can be divided into pre-tectonic(~2.15 Ga;peak age=2.18 Ga) and post-tectonic(~1.85 Ga) granitoids. The pre-tectonic granitoids are magnetite and hornblende-biotite monzogranites and granodiorites. Pre-tectonic monzogranites are widespread in the JLJB and have A2-type affinities. In contrast, pretectonic granodiorites are only present in the Simenzi area and have adakitic affinities. The post-tectonic granitoids consist of porphyritic monzogranite, syenite, diorite, granodiorite, quartz monzonite, monzogranite, and granitic pegmatite, which are adakitic rocks and I-, S-, and A2-type granitoids. The assemblage of pre-tectonic A2-type granitoids and adakitic rocks indicates the initial tectonic setting of the JLJB was a continental back-arc basin. The assemblage of post-tectonic adakitic rocks and I-, S-, and A2-type granitoids indicates a post-collisional setting. The 2.20-2.15 Ga A2-type granitoids and adakitic rocks were associated with the initial stage of back-arc extension, and the peak of back-arc extension is inferred from the subsequent(2.15-2.10 Ga) mafic intrusive activity. The ~1.90 Ga adakitic rocks mark the beginning of the postcollisional stage, which was followed by the intrusion of low-temperature S-and I-type granitoids. High-to low-pressure granitoids(S-type) were generated during the peak of post-collisional lithospheric delamination and asthenospheric upwelling. The emplacement of later granitic pegmatites occurred during the waning of the orogeny.
基金financially supported by the National Basic Research Program of China(NBRPC,973 program)(2011CB403001)
文摘Aeromagnetic anomaly zonation of the Ordos Basin and adjacent areas was obtained by processing high-precision and large-scale aeromagnetic anomalies with an approach of reduction to the pole upward continuation. Comparative study on aeromagnetic and seismic tomography suggests that aeromagnetic anomalies in this area are influenced by both the magnetic property of the rock and the burial depth of the Precambrian crystalline basement. Basement depth might be the fundamental control factor for aeromagnetic anomalies because the positive and negative anomalies on the reduction to the pole- upward-continuation anomaly maps roughly coincide with the uplifts and depressions of the crystalline basement in the basin. The results, together with the latest understanding of basement faults, SHRIMP U-Pb zircon dating of metamorphic rock and granite, drilling data, detrital zircon ages, and gravity data interpretation, suggest that the Ordos block is not an entirety of Archean.
文摘Tectonic movements in the North Slope of Biyang Depression are comparatively mild and stable, thus generating two categories of deltas. Elementary reasons for the coexistence of deltas are the existence of the palaeodrainage pattern and the effect of palaeotopography. The sedimentary facies is the most elementary factor controlling the physical property of reservoirs. The layout and spatial combination model of the sand body and faults are the major influential factors on the occurrence of hydrocarbons. Comparative study on Houzhang and Yanglou Braided Deltas as well as Zhangchang and Gucheng Meandering Deltas suggests that the hydrocarbons distribute primarily in the mouth bar subfacies and secondarily in the distal bar subfacies of the braided delta, while the oil-water and aqueous layers are mainly found in the subaquatic distributary channel. Although the sand body of the meandering delta has excellent stratification and high porosity, the thickness is far less than that of the braided delta. Therefore, the yield of hydrocarbon is relatively low. The mudstone of the delta front subfacies is a kind of source rock with a high content of organic matter. The conducting system for oil/gas migration in the North Slope is a composite one comprising faults and sand- stone reservoirs. A large amount of oil/gas from the deep depression first migrated towards the slope along the sand body which stretches and connects with the source rocks, and then redistributed along the faults in the slope. After the movement reached a standstill, the faults formed the occlusion in the up-dip direction of the sand body, generating a great quantity of fault block hydrocarbon reservoirs in the Noah Slope.
文摘According to the ideas and concepts of systems dynamic of continent structure, using previous information related to the study area, combining analyses on orogenic belt, basin and magmatic rock, the present paper synthesizes the tectono - sedimentary development of southeastern coast region, China, with special emphasis on the mountain making, basining and magmatic activity. The tectonic evolution after Late Caledonian orogeny was dominated by alternating rifting and converging, subsiding and uplifting, mountain making and basining in central and southern parts of southeastern China and the adjacent regions to the east and west. Seventeen geologic events , nine events of plate or terrain convergence , and continental crust accretion , as well as eight events of intracontinental rifting and basin faulting , are closely related to the tectonic and sedimentary evolution of the study area . The accompanied intense and frequent sedimentation , folding , faulting , magmatism and ore- forming process allowed huge coal , multimetal and potential petroleum source rocks to form in local depressions throughout the Caledonian to Himalavan time .
文摘Continental rifting and magmatism has been extensively studied worldwide as it is believed that continental rifting, break up of continents and associated magmatism lead to genesis of new oceanic crust. However, various regions of the world show that these processes may lead to genesis of other types of crust than the oceanic crust. Laxmi Basin in the western continental margin of the India is one such region with an enigmatic crust.Due to its extreme strategic significance for the palaeogeographic reconstruction of continents during Cretaceous continental breakup of India, this basin has attracted various workers for more than two decades. However, still the issue of nature of crust in the basin remains controversial. In this contribution, in order to identify nature of crust, mechanism of continental extension in the Laxmi Basin has been studied for the first time through newly acquired seismic data from the basin. Here, we propose a plausible mechanism of crustal extension in the Laxmi Basin which eventually constrains the nature of crust of the Laxmi Basin. We have demonstrated that the crust in the Laxmi Basin can be categorised in two zones of stretched and transitional crust. In the stretched zone several fault bounded horst and graben structures are identified which preserve syn- and post-rift sediments along with different periods of hiatus in sedimentations as unconformities. These faults are identified as listric faults in the upper crust which sole out in the detachment faults.Detachment faults decouples the upper brittle and lower ductile crust. The transitional crust is identified as heavily intruded by sills and basaltic volcanic which were emplaced due to melting of subcontinental mantle(SCM) after hyper-stretching of crust and serpentinisation of the SCM. Panikkar Ridge is proposed to be one such basaltic volcanic body derived from melting of lower part of the SCM.
文摘The Shilu Fe-polymetallic ore deposit,a famous hematite-rich Fe-ore deposit,is situated at the western Hainan Province of south China.The deposit characterizes the upper Fe ores and the lower Co-Cu ores,which are mainly hosted within a low-grade to medium-grade,dominantly submarine metamorphosed siliciclastic and carbonate sedimentary succession of the Neoproterozoic Shilu Group.Three facies types of metamorphosed BIFs,i.e.the oxide facies,the silicate-oxide facies and the sulfide-carbonate facies BIFs,are identified within the sixth sequence of the Shilu Group.The oxide facies BIF(i.e.the Fe-rich itabirites or ores)consists of alternating hematite-rich microbands with quartz-rich microbands;the silicate-oxide facies BIF(i.e.the Fe-poor itabirites or ores)comprises alternating millimeter-to a few tens meter-scale,magnetite-hematite-rich bands with calcsilicate-rich(garnet+actinolite+diopside+epidote+quartz)meso-to microbands;and the sulfide-carbonate facies BIF(i.e.the Co-Cu ores)contains alternating macro-to mesobands of Co-bearing pyrite and pyrrhotite,and chalcopyrite with mesobands of dolomite+calcite+diopside+quartz and/or chlorite+sericite+quartz.The blastooolitic,blastopelletoid blastocolloidal and blastopsammitic textures,and blasobedding structures which most likely represent primary sedimentation are often observed in these BIF facies.The interbedded host rocks with the BIFs mainly are the pyroxene-amphibole rocks and the banded or impure dolostones,and also contain banded or laminated structures,and lepido-gra-noblastic,nematoblastic and/or blastoclastic textures.Compositionally,the main host rocks,the pyroxene-amphibole rocks contain basic-intermediate SiO_2(~54.00 wt.%),CaO(~14.19 wt.%),MgO(~9.68 wt.%)and Al_2O_3(~8.49 wt.%)with a positive correlation between Al_2O_3 and TiO_2.The UCC-like Zr and Hf abundances,high Ba content andεNd(t)value(^-5.99)as well as the ratios of La/YbPAAS(0.17~1.00),δEuPAAS(0.88~1.12)andδCePAAS(0.93~1.13)commonly reveal that the protoliths to this type rocks are hydrogenic with a large contribution of terrigenous sediments and minor hydrothermal input.The high CaO+MgO+LOI contents and the extremely low trace element and REEconcentrations as well as the ratios of Y/Ho(44~45),δEuPAAS(1.13~1.57)andδCePAAS(0.69~0.98)reflect a marine origin with minor terrigenous materials for the banded or impure dolostones.Moreover,this type rocks also account for a negativeεNd(t)value(^-7.49).The oxide facies BIF is dominated by Fe_2O_3+FeO(~75.59wt.%)and SiO_2(~20.47 wt.%)with aεNd(t)value of^-6.10.The variable contents in Al_2O_3,TiO 2,K2O,Na2O,Zr,Hf and∑REE,and variable ratios of Y/Ho(24~39)andδEuPAAS(0.86~11.07)suggest the precursor sediments to this facies BIF are admixtures of sea-floor hydrothermal fluids and seawaters with minor involvement of detrital components.Compared to the oxide facies BIF,the silicate-oxide facies BIF is lower in Fe_2O_3+Fe O(~39.81wt.%)and Ba but higher in SiO_2(~42.54 wt.%),Al2O3(~3.60 wt.%),TiO_2(~0.19 wt.%),MgO(~1.12 wt.%),CaO(~9.06 wt.%),K_2O(~0.98 wt.%),Mn and Zr.The ratios of Y/Ho(25~34),La/YbPAAS(0.14-0.74)andδEuPAAS(0.91~1.12)most likely are linked to higher degree of detrital contamintants.While the sulfide-caronate facies BIF is main but variable in Fe_2O_3+Fe O(15.79~57.91 wt.%),SiO 2(0.54~61.52 wt.%),MgO(0.12~16.09wt.%),CaO(0.17~23.41 wt.%)and LOI(8.28-30.06 wt.%).The generally low contents in trace elements(including REE)except for an obvious enrichment in Pb,and the positive Ce anomalies(δCePAAS=1.04~1.95)and negative Pr anomalies(δPrPAAS=0.67~0.93),as well as the variable ratios ofδEuPAAS(0.72~1.71),La/YbPAAS(0.26~1.60)and Y/Ho(26~57)suggest that the precursors to the sulfide-carbonate facies BIF mainly are metalliferious sediments from deep-marine hydrotheral source with minor detrital components.The T2DM ages(ca.2.0 Ga)imply that the Shilu BIFs and interbedded host rocks contain a component with Paleoproterozoic crustal residence age due to a significant crustal accretion event at ca.2.0 Ga in Hainan Island.In connection with the petrographical and mineralogical relationship,we conclude that the precursor precipitates to the Shilu BIFs are variable degree of admixtures of the Fe-Co-Cu-(Si)-rich hydrothermal fluids and detrital components from seawater and fresh water carring continental landmass;whereas the protolith to the main interbedded host rocks,i.e.the pyroxene-amphibole rocks,most likely was terrigenous,fine-grained clastic-sediments but with significant input of hydrothermal fluids in a seawater environment.As a result,a continent marginal marine basin is proposed for deposition of the Shilu BIFs and interbedded host rocks.Sea-level fluctuations caused by marine transgression–regressions possibly contributed to changes in the composition and varied input of the terrigenous sediments.