On Some Properties of Neutrosophic Semi Continuous and Almost Continuous Mapping

The neutrality’s origin,character,and extent are studied in the Neutrosophic set.The neutrosophic set is an essential issue to research since it opens the door to a wide range of scientific and technological applications.The neutrosophic set can find its spot to research because the universe is filled with indeterminacy.Neutrosophic set is currently being developed to express uncertain,imprecise,partial,and inconsistent data.Truth membership function,indeterminacymembership function,and falsitymembership function are used to express a neutrosophic set in order to address uncertainty.The neutrosophic set producesmore rational conclusions in a variety of practical problems.The neutrosophic set displays inconsistencies in data and can solve real-world problems.We are directed to do our work in semi-continuous and almost continuous mapping on the basis of the neutrosophic set by observing these.Since we are going to study the properties of semi continuous and almost continuous mapping,we present the meaning of N-semi-open set,N-semi-closed set,N-regularly open set,N-regularly closed set,N-continuous mapping,N-open mapping,N-closed mapping,Nsemi-continuous mapping,N-semi-open mapping,N-semi-closed mapping.Additionally,we attempt to demonstrate a portion of their properties and furthermore referred to some examples.

Fatigue Topology Optimization Design Based on Distortion Energy Theory and Independent Continuous Mapping Method

Fatigue failure is a common failure mode under the action of cyclic loads in engineering applications,which often occurs with no obvious signal.The maximum structural stress is far below the allowable stress when the structures are damaged.Aiming at the lightweight structure,fatigue topology optimization design is investigated to avoid the occurrence of fatigue failure in the structural conceptual design beforehand.Firstly,the fatigue life is expressed by topology variables and the fatigue life filter function.The continuum fatigue optimization model is established with the independent continuous mapping(ICM)method.Secondly,fatigue life constraints are transformed to distortion energy constraints explicitly by taking advantage of the distortion energy theory.Thirdly,the optimization formulation is solved by the dual sequence quadratic programming(DSQP).And the design scheme of lightweight structure considering the fatigue characteristics is obtained.Finally,numerical examples illustrate the practicality and effectiveness of the fatigue optimization method.This method further expands the theoretical application of the ICM method and provides a novel approach for the fatigue optimization problem.

Block and parallel modelling of broad domain nonlinear continuous mapping based on NN

The necessity of the use of the block and parallel modeling of the nonlinear continuous mappings with NN is firstly expounded quantitatively. Then, a practical approach for the block and parallel modeling of the nonlinear continuous mappings with NN is proposed. Finally, an example indicating that the method raised in this paper can be realized by suitable existed software is given. The results of the experiment of the model discussed on the 3-D Mexican straw hat indicate that the block and parallel modeling based on NN is more precise and faster in computation than the direct ones and it is obviously a concrete example and the development of the large-scale general model established by Tu Xuyan.

Viscosity approximation methods with weakly contractive mappings for nonexpansive mappings

Let K be a closed convex subset of a real reflexive Banach space E, T：K→K be a nonexpansive mapping, and f：K→K be a fixed weakly contractive （may not be contractive） mapping. Then for any t∈（0, 1）, let x1∈K be the unique fixed point of the weak contraction x1→tf（x）＋（1-t）Tx. If T has a fixed point and E admits a weakly sequentially continuous duality mapping from E to E^＊, then it is shown that {xt} converges to a fixed point of T as t→0. The results presented here improve and generalize the corresponding results in （Xu, 2004）.

ON PROBLEM OF NEAREST COMMON FIXED POINT OF NONEXPANSIVE MAPPINGS

The purpose is by using the viscosity approximation method to study the convergence problem of the iterative scheme for an infinite family of nonexpansive mappings and a given contractive mapping in a reflexive Banach space. Under suitable conditions, it was proved that the iterative sequence converges strongly to a common fixed point which was also the unique solution of some variational inequality in a reflexive Banach space. The results presented extend and improve some recent results.

A Note on Topological Entropy of Continuous Self-Maps

Topological entropy can be an indicator of complicated behavior in dynamical systems. It is first introduce by Adler, Konheim and McAndrew by using open covers in 1965. After that it is still an active research by many researchers to produce more properties and applications up to nowadays. The purpose of this paper is to review and explain most important concepts and results of topological entropies of continuous self-maps for dynamical systems on compact and non-compact topological and metric spaces. We give proofs for some of its elementary properties of the topological entropy. Slight modification on Adler＇s topological entropy is also presented.

On the Category of L-fuzzifying TOP

In this paper, the category of L-FTOP and the relations with the categories of TOP,L α-FTOP are discussed.

Concurrent topology optimization for minimization of total mass considering load-carrying capabilities and thermal insulation simultaneously

The present work introduces a novel concurrent optimization formulation to meet the requirements of lightweight design and various constraints simultaneously.Nodal displacement of macrostructure and effective thermal conductivity of microstructure are regarded as the constraint functions, which means taking into account both the loadcarrying capabilities and the thermal insulation properties.The effective properties of porous material derived from numerical homogenization are used for macrostructural analysis. Meanwhile, displacement vectors of macrostructures from original and adjoint load cases are used for sensitivity analysis of the microstructure. Design variables in the form of reciprocal functions of relative densities are introduced and used for linearization of the constraint function. The objective function of total mass is approximately expressed by the second order Taylor series expansion. Then, the proposed concurrent optimization problem is solved using a sequential quadratic programming algorithm, by splitting into a series of sub-problems in the form of the quadratic program. Finally, several numerical examples are presented to validate the effectiveness of the proposed optimization method. The various effects including initial designs, prescribed limits of nodal displacement, and effective thermal conductivity on optimized designs are also investigated. An amount of optimized macrostructures and their corresponding microstructures are achieved.

A coastal acoustic tomography experiment in the Tokyo Bay

Eight sets of coastal acoustic tomography (CAT) systems were deployed during November 29 to December 10, 2002 at the coasts on both sides of Tokyo Bay to measure tidal current structures at 15-min interval.Sound transmission across the Tokyo Bay (between Yokohama and Chiba)was successfully traced,even under severe interference from ship generated wakes and bubbles.Tidal current fields changing from northward to southward flow are well reconstructed by the inverse analysis of travel-time difference data for a period with the best sound transmission condition. It is suggested that the CAT is the most powerful tool to continuously map tidal current fields in the coastal seas with heavy shipping traffic and fisheries activity.

Generalized Strongly Nonlinear Quasi-Complementarity Problems

Using the algorithm in this paper, we prove the existence of solutions to the gene-ralized strongly nonlinear quasi-complementarity problems and the convergence of theiterative sequences generated by the algorithm. Our results improve and extend thecorresponding results of Noor and Chang-Huang. Moreover, a more general iterativealgorithm for finding the approximate solution of generalized strongly nonlinear quasi-complementarity problems is also given. It is shown that the approximate solution ob-tained by the iterative scheme converges to the exact solution of this quasi-com-plementarity problem.

Existence of Solutions to Differential-Iterative Equation

The existence and the behavior of solutions to the differential-iterative equation arestudied without the restriction that f is monotone An error in and available paper is correctedhere.

Uniqueness of Solutions to Differential-Iterative Equation

Conditions for the uniqueness of solutions to the differential-iterative equations x'(t)=f(x(x(t))) are given by use of fixed point theorems.

ICM Method Combined with Meshfree Approximation for Continuum Structure

The independent continuous mapping（ICM） method is integrated into element free Galerkin method and a new implementation of topology optimization for continuum structure is presented.To facilitate the enforcement of the essential boundary condition and derivative of various sensitivities,a singular weight function in element free Galerkin method is introduced.Material point variable is defined to illustrate the condition of material point and its vicinity instead of element or node.The topological variables field is constructed by moving least square approximation which inherits the continuity and smoothness of the weight function.Due to reciprocal relationships between the topological variables and design variables,various structural responses sensitivities are derived according to the method for calculating the partial derivatives of compound functions.Numerical examples indicate that checkerboard pattern and mesh-dependence phenomena are overcome without additional restriction methods.

Intuitionistic Fuzzy α-Generalized Closed Sets in Terms of Minimal Structure Spaces

In this paper, we introduce the notion of intuitionistic fuzzy α-generalized closed sets in intuitionistic fuzzy minimal structure spaces and investigate some of their properties. Further, we introduce and study the concept of intuitionistic fuzzy α-generalized minimal continuous functions.

Strong convergence theorems for nonexpansive semi-groups in Banach spaces

Some strong convergence theorems of explicit composite iteration scheme for nonexpansive semi-groups in the framework of Banach spaces are established. Results presented in the paper not only extend and improve the corresponding results of ShiojiTakahashi, Suzuki, Xu and Aleyner-Reich, but also give a partially affirmative answer to the open questions raised by Suzuki and Xu.

ALGORITHMS FOR A SYSTEM OF GENERALIZED MIXED EQUILIBRIUM PROBLEMS AND A COUNTABLE FAMILY OF SOME NONLINEAR MULTI-VALUED NONEXPANSIVE-TYPE MAPS

In this paper, relaxed iterative algorithms of Krasnoselskii-type and Halpern-type that approximate a solution of a system of a generalized mixed equilibrium problem anda common fixed point of a countable family of totally quasi-C-asymptotically nonexpansivemulti-valued maps are constructed. Strong convergence of the sequence generated by thesealgorithms is proved in uniformly smooth and strictly convex real Banach spaces with Kadec-Klee property. Furthermore, several applications of our theorems are also presented. Finally,our theorems are significant improvements on several important recent results for this classof nonlinear problems.

Merit functions for nonsmooth complementarity problems and related descent algorithm

Under some assumptions, the solution set of a nonlinear complementarity problem coincides with the set of local minima of the corresponding minimization problem. This paper uses a family of new merit functions to deal with nonlinear complementarity problem where the underlying function is assumed to be a continuous but not necessarily locally Lipschitzian map and gives a descent algorithm for solving the nonsmooth continuous complementarity problems. In addition, the global convergence of the derivative free descent algorithm is also proved.

p-order Feigenbaum's Maps

A continuous map f from the unit closed interval into itself is called a p-order Feigenbaum's map if fp(λx) = λf(x),f(O)=1 and f|[λ,1] is univallecular. In this paper, some characterizations of p order Feigenbaum's maps are discussed and the existence for both types of such maps is proven.

Continuous selections for pseudo-lower semicontinuous set-valued mappings on convex structure spaces and hyperspace contractibility

SINCE 1956, Michael’s continuous selection theory has been applied to functional analysis,topology, approximation theory and other mathematical fields. In this letter, the concept ofthe pseudo-lower semicontinuity is introduced, and a convex structure of metric space is de-fined. A continuous selection theorem for pseudo-lower semicontinuity is given. This

A topological position of the set of continuous maps in the set of upper semicontinuous maps

Let (X, ρ) be a metric space and ↓USCC(X) and ↓CC(X) be the families of the regions below all upper semi-continuous compact-supported maps and below all continuous compact-supported maps from X to I = [0,1], respectively. With the Hausdorff-metric, they are topological spaces. In this paper, we prove that, if X is an infinite compact metric space with a dense set of isolated points, then (↓USCC(X), ↓CC(X)) ≈ (Q, c 0 ∪ (Q Σ)), i.e., there is a homeomorphism h:↓USCC(X) → Q such that h(↓CC(X)) = c 0 ∪ (Q Σ), where Q = [?1,1]ω, Σ = {(x n ) n∈? ∈ Q: sup|x n | < 1} and c 0 = {(x n ) n∈? ∈ Σ: lim n→+∞ x n = 0}. Combining this statement with a result in our previous paper, we have $$ ( \downarrow USCC(X), \downarrow CC(X)) \approx \left\{ \begin{gathered} (Q,c_0 \cup (Q\backslash \Sigma )), if the set of isolanted points is dense in X, \hfill \\ (Q,c_0 ),otherwise, \hfill \\ \end{gathered} \right. $$ if X is an infinite compact metric space. We also prove that, for a metric space X, (↓USCC(X), ↓CC(X)) ≈ (Σ, c 0) if and only if X is non-compact, locally compact, non-discrete and separable.