Analysis of Microbial Contamination Factors and Critical Control Points in the Process of Hog Slaughter and Production

In order to provide a reference for the further study of microbial contamination in the pork production process. Microbial contamination of pigs came from three slaughterhouses were detected, and critical control points in the progress of hog slaughter and processing were analyzed. The results showed that microbial con- taminatian existed in the entire slaughter and processing progress, including shower and assassination bloodletting, separation of the internal organs, chopping boards, workshop environment, personal hygiene of the operators, etc. , which should be paid more attention to. The results indicated that reasonable protection measures should be carried out, disinfection awareness of the operators should be improved, and regular disinfection should be ruled under the condition of continu- ous operation.

The Research on the Methods to Confirm the Key Control Points of the Internal Accounting Control

The control points are the key issue of the internal control, and the key control points mean the control joints that play an important part in the process of the operation. If these key control points are not well controlled, the process of the operation disposal will be mistaken and cannot reach the goal. However, for the confirmation of the control points, many studies only do qualitative research from the important aspect instead of quantificational research. They are devoid of a series of scientific methods. This paper advances quantificational methods to confirm the key control points from two aspects of job evaluation and mathematics model.

AUTOMATIC SEARCHING OF CONTROL POINT IN NOAA AVHRR IMAGE

This paper discusses the approaches for automatical searching of control points in the NOAA AVHRR image on the basis of data rearrangement in the form of latitude and longitude grid. The vegetation index transformation and multi-level matching strategies have been proven effective and successful as the experiments show while the control point database is established.

Bezier Control Points Method to Solve Scheduling of Injections of Immunotherapeutic Agents

Cancer immunotherapy aims at enhancing immune system to defend against the tumor. However, it is associated with injecting small doses of tumor-bearing molecules or even using drugs. The problem is that how to schedule these injections effectively and/or how to apply drugs in a way to decrease toxic side effects of drugs such that the tumor growth to be stopped or at least to be limited. Here, the theory of optimal control has been applied to find the optimal schedule of injections of an immunotherapeutic agent against cancer. The numerical method employed works for any dynamic linear system and has almost precise solution. In this work, it was tested for a well known model of the tumor immune system interaction.

The Bezier Control Points Method for Solving Delay Differential Equation

In this paper, Bezier surface form is used to find the approximate solution of delay differential equations (DDE’s). By using a recurrence relation and the traditional least square minimization method, the best control points of residual function can be found where those control points determine the approximate solution of DDE. Some examples are given to show efficiency of the proposed method.

Precision Point to Point Control of Proportional Valve Controlled Motor with a Time Varying Load

Aim In accordance with the positioning control for valve controlled motor electrohydraulic proportional servo systems driving the static load torque, the positioning performance was studied in the presence of the time? varying deadzone and gain. Methods The large positioning errors caused by the time varying deadzone were significantly reduced by using the dynamic compensation method for the deadzone; and the large overshoot caused by the time varying gain were dramatically reduced by using the three section intelligent control schemes. Results Experimental results demonstrated that the positioning performance of rapid response, high accuracy and smaller or even no overshoot was achieved under a wide variations of load torque. Conclusion The good positioning performance for valve controlled motor servo systems has been achieved in the presence of the time varying deadzone and gain.

The Determination of the Optimal Buffer Size Based on the Control Point Policy

The failure prone production systems are examined. For the hybrid systems, the failure of machines is unavoidable. By introduced the idea of purchasing extra capacity to the system, a so-call blockage hedging point is obtained. Meanwhile, a near-optimal method is presented to determine the optimal buffer sizes. The continuous flow model of the unreliable manufacturing systems is considered and the control point policy is involved in. Numerical results not only testify the method and show us its application but also to some extent show the impact of the machines＇ failure rate on the optimal buffer size.

Construction Project Management and Construction Quality Control Strategy

With the gradual acceleration of the urbanization process,the construction industry has been developing rapidly.As the key link to ensure the quality and safety of the project,construction management and construction quality control are of great significance to enhance the competitiveness of construction enterprises and realize sustainable development.In this paper,the effective strategy of construction management and the effective strategy of construction quality control will be discussed in depth,aiming at providing useful management and quality control strategies for construction enterprises.

Accurate disparity estimation in light field using ground control points

The recent development of light field cameras has received growing interest, as their rich angular information has potential benefits for many computer vision tasks. In this paper, we introduce a novel method to obtain a dense disparity map by use of ground control points(GCPs) in the light field.Previous work optimizes the disparity map by local estimation which includes both reliable points and unreliable points. To reduce the negative effect of the unreliable points, we predict the disparity at non-GCPs from GCPs. Our method performs more robustly in shadow areas than previous methods based on GCP work, since we combine color information and local disparity. Experiments and comparisons on a public dataset demonstrate the effectiveness of our proposed method.

NN adaptive pole placement method for sintering finish point control

A neural network model with a special structure, which is divided into linearand nonlinear parts, was proposed for identification of a nonlinear system. In this model, thenonlinear part of the object is treated as a measured disturbance, and is compensated by a feedforward method; an adaptive pole placement algorithm is used to control the linear part of theobject. The simulation results show that the identification efficiency and accuracy are improvedwhen the new controller is applied to sintering finish point control.

CONSTANT WORK-POINT CONTROL FOR PARALLEL HYBRID SYSTEM WITH CAPACITOR ACCUMULATOR IN HYDRAULIC EXCAVATOR

Limitations of various accumulators in hybrid hydraulic excavator are analyzed. A program using capacitor as the accumulator based on constant work-point control is put forward. A simulating experimental system of hybrid construction machinery is established, and experimental study on constant work-point control for parallel hybrid system with capacitor accumulator is carried out using the pressure and flow rate derived from boom cylinder of hydraulic excavator in actual work as the simulating loads. A program of double work-point control is proposed and proved by further experiments.

Strike Point Control on EAST Using an Isoflux Control Method

For the advanced tokamak,the particle deposition and thermal load on the divertor is a big challenge.By moving the strike points on divertor target plates,the position of particle deposition and thermal load can be shifted.We could adjust the Poloidal Field（PF） coil current to achieve the strike point position feedback control.Using isoflux control method,the strike point position can be controlled by controlling the X point position.On the basis of experimental data,we establish relational expressions between X point position and strike point position.Benchmark experiments are carried out to validate the correctness and robustness of the control methods.The strike point position is successfully controlled following our command in the EAST operation.

The Roles of Countrywomen in Controlling Non-point Source Pollution

The main causes of non-point source pollution in Taihu Lake are the improper ways of crop production, animal husbandry, and daily runoff. The paper discusses the relationship between countrywomen and non-point source pollution control by 731 questionnaires in Weidu village and 466 questionnaires in Dapu Town. The roles of countrywomen have changed in families and they have close relationship with non-point source pollution. Furthermore, we discuss the possibility and methods of organizing countrywomen in non-point source pollution control.

NUMERICAL SIMULATION OF MOLTEN POOL AND CONTROL STRATEGY OF KISS POINT IN A TWIN-ROLL STRIP CASTING PROCESS

Coupled turbulent flow, temperature fields of the twin-roll casting strip process were simulated by three-dimensional finite element method. Based on the heat balance calculation and using inverse methods between the simulations and real experiments, the relational models among casting speed, location, and coefficient of heat transfer between molten metal and rolls in different regions are given. In the simulation, the calculated surface temperatures are in good agreement with the measured values. An on-line model of kiss point is derived by simulations and the geometry of molten pool, corresponding control strategy is also proposed.

Study on the Control Model of Rural Non-point Source Pollution——Taking Ninghe County in Tianjin as an Example

[Objective] The aim was to study the control model of rural non-point source pollution.[Method] Taking Ninghe County(a typical agricultural county in Tianjin) as an example,the current development of local economy and society and characteristics of rural non-point source pollution were studied firstly,then the control model of rural non-point source pollution suitable for Ninghe County was constructed,and its environmental and economic benefits were analyzed finally.[Result] According to the sources of non-point source pollution,the control model of rural non-point source pollution in Ninghe County was divided into three modules from the aspects of planting industry,livestock raising industry and rural living.The main content of non-point source pollution control module of planting industry was composed of rational utilization of chemicals,water-saving irrigation,diversified utilization of straw etc.Non-point source pollution control module of livestock raising industry focused on the site selection of farm or raising zones,choice of raising mode,comprehensive utilization of livestock waste etc.In the non-point source pollution control module of rural living,villages were divided into two types(small town and ecological village) based on various geographical positions.In a word,these three modules were interrelated and targeted for non-point source pollution control in villages under different development situations.[Conclusion] The study could provide references for the rural non-point source pollution control in Hai River basin and other regions of Northern China.

法国阿尔斯通公司的Point-on-Wave Controller

本文介绍了大唐韩城第二发电有限责任公司工期2×600 MW工程中采用的国内首次引进法国阿尔斯通公司生产的断路器控制器RPH2的工作原理。以及在不同工况下,如何通过控制断路器各相的分/合闸时间点,来减少断路器正常分/合闸对设备和系统造成冲击。最后介绍了该装置的环境补偿、自适应和负荷电流测量功能。

Controlled-release fertilizer(CRF): A green fertilizer for controlling non-point contamination in agriculture

Fertilizers contribute greatly to high yields but also result in environmental non-point contamination, including the emission of greenhouse gas(N 2O) and eutrophication of water bodies. How to solve this problem has become a serious challenge, especially for China as its high ecological pressure. Controlled-release fertilizer(CRF) has been developed to minimize the contamination while keeping high yield and has become a green fertilizer for agriculture. Several CRFs made with special coating technology were used for testing the fertilizer effects in yield and environment through pot experiment and field trial. The result indicated that the CRFs had higher N use efficiency, thus reducing N loss through leaching and volatilization while keeping higher yields. Comparing with imported standard CRFs, the test on CRFs showed similar fertilizer effect but with much lower cost. CRFs application is becoming a new approach for minimizing non-point contamination in agriculture.

Set-point Filter Design for a Two-degree-of-freedom Fractional Control System

This paper focuses on a new approach to design(possibly fractional) set-point filters for fractional control systems.After designing a smooth and monotonic desired output signal,the necessary command signal is obtained via fractional input-output inversion.Then,a set-point filter is determined based on the synthesized command signal.The filter is computed by minimizing the 2-norm of the difference between the command signal and the filter step response.The proposed methodology allows the designer to synthesize both integer and fractional setpoint filters.The pros and cons of both solutions are discussed in details.This approach is suitable for the design of two degreeof-freedom controllers capable to make the set-point tracking performance almost independent from the feedback part of the controller.Simulation results show the effectiveness of the proposed methodology.

Control Access Point of Devices for Delay Reduction in WBAN Systems with CSMA/CA

Due to the gathering of sickrooms and consultation rooms in almost all hospitals, the performance of wireless devices system is deteriorated by the increase of collision probability and waiting time. In order to improve the performance of wireless devices system, relay is added to control the access point and then the access of devices is distributed. The concentration of access point is avoided and then the performance of system is expected to be improved. The discrete time Markov chain (DTMC) is proposed to calculate the access probability of devices in a duration time slot. The collision probability, throughput, delay, bandwidth and so on are theoretically calculated based on the standard IEEE802.15.6 and the performance of the system with and without relay is compared. The numerical result indicates that the performance of the system with control access point is higher than that of the system without control access point when the number of devices and/or packet arrive rate are high. However, the system with control access point is more complicated. It is the trade-off between the performance and the complication.

Variable Parameter Nonlinear Control for Maximum Power Point Tracking Considering Mitigation of Drive-train Load

Since mechanical loads exert a significant influence on the life span of wind turbines, the reduction of transient load on drive-train shaft has received more attention when implementing a maximum power point tracking U+0028 MPPT U+0029 controller. Moreover, a trade-off between the efficiency of wind energy extraction and the load level of drive-train shaft becomes a key issue. However, for the existing control strategies based on nonlinear model of wind turbines, the MPPT efficiencies are improved at the cost of the intensive fluctuation of generator torque and significant increase of transient load on drive train shaft. Hence, in this paper, a nonlinear controller with variable parameter is proposed for improving MPPT efficiency and mitigating transient load on drive-train simultaneously. Then, simulations on FAST U+0028 Fatigue, Aerodynamics, Structures, and Turbulence U+0029 code and experiments on the wind turbine simulator U+0028 WTS U+0029 based test bench are presented to verify the efficiency improvement of the proposed control strategy with less cost of drive-train load. © 2017 Chinese Association of Automation.