Determination of the metastable zone and induction time of thiourea for cooling crystallization

The solubility,metastable zone width(MSZW),and induction time of thiourea for cooling crystallization were experimentally determined in the temperature range of 283-323 K.The solubility data could be well described by the Apelblat equation model as lnx=-99.55+1071.66/T+16.27 lnT.The determinations of the effects of various stirring and cooling rates indicated that the MSZW increased with increasing and decreasing cooling and stirring rates,respectively.Furthermore,the induction times at various temperatures and supersaturation ratios were also measured.The results indicated that homogeneous nucleation could occur at high supersaturation,whereas heterogeneous nucleation was more likely to occur at low supersaturation.Based on the classical nucleation theory and induction period data,the calculated solid-liquid interfacial tensions of thiourea in deionized water at 302.46 and 312.58 K were 2.86 and 2.94 mJ·m^(-2),respectively.

Kinetic parameter estimation for cooling crystallization process based on cell average technique and automatic differentiation

In this paper,a cell average technique(CAT)based parameter estimation method is proposed for cooling crystallization involved with particle growth,aggregation and breakage,by establishing a more efficient and accurate solution in terms of the automatic differentiation(AD)algorithm.To overcome the deficiency of CAT that demands high computation cost for implementation,a set of ordinary differential equations(ODEs)entailed from CAT based discretized population balance equation(PBE)are solved by using the AD based high-order Taylor expansion.Moreover,an AD based trust-region reflective(TRR)algorithm and another interior-point(IP)algorithm are established for estimating the kinetic parameters associated with particle growth,aggregation and breakage.As a result,the estimation accuracy can be further improved while the computation cost can be significantly reduced,compared to the existing algorithms.Benchmark examples from the literature are used to illustrate the accuracy and efficiency of the AD-based CAT,TRR and IP algorithms in comparison with the existing algorithms.Moreover,seeded batch cooling crystallization experiments ofβform L-glutamic acid are performed to validate the proposed method.

Production of Sucrose Crystals of Uni-Modal Size Distribution by Seeded Batch Cooling Crystallization

From sucrose aqueous solution of high viscosity, sucrose was crystallized by seeded cooling in a batch crystallizer. At low seed loadings, the product crystal size distribution (CSD) was wide-spread because of enormous secondary and primary nucleation. However, at high seed loadings, it became uni-modal, where the crystallization was dominated by seed growth with practically no secondary nucleation. Enough seeding was thus effective in suppressing nucleation even during batch crystallization with high viscosity solution. The volume mean size of the product crystals obtained at high seed loadings agreed with that calculated by a simple mass balance assuming growth-dominated crystallization with no change in the number of crystals.

Characterization of recrystallized itraconazole prepared by cooling and anti-solvent crystallization

The objective of the present study was to alter the crystal habit of itraconazole(ITZ)by cooling and anti-solvent crystallization and characterize its properties.ITZ was recrystallized in different solvents and the effects of each solvent on morphology of crystals,dissolution behavior and solid state of recrystallized drug particles were investigated.The results revealed that ITZ crystals recrystallized by cooling and anti-solvent crystallization showed the different crystal habits from the untreated ITZ.Using cooling crystallization tended to provide needle-shaped crystals while the crystals obtained from anti-solvent crystallization showed more flaky,plate shape.This indicated the importance of preparation method on nucleation and crystal growth.No change in drug polymorphism was observed,according to determination of thermal property and crystalline state by differential scanning calorimetry and powder X-ray diffractometry,respectively.The recrystallized ITZ showed higher drug dissolution than untreated ITZ and the highest drug dissolution was observed from the samples recrystallized in the presence of PEG 200,which provided the small plate-shaped crystals with tremendously increased in surface area.However,the increasing of drug dissolution is relatively small,therefore,further development may be required.

Effect of cooling rate on the crystallization behavior of perovskite in high titanium-bearing blast furnace slag

The effect of cooling rate on the crystallization of perovskite in high Ti-bearing blast furnace（BF） slag was studied using confocal scanning laser microscopy（CSLM）. Results showed that perovskite was the primary phase formed during the cooling of slag. On the slag surface, the growth of perovskite proceeded via the successive production of quasi-particles along straight lines, which further extended in certain directions. The morphology and structure of perovskite was found to vary as a function of cooling rate. At cooling rates of 10 and 30 K/min, the dendritic arms of perovskite crossed obliquely, while they were orthogonal at a cooling rate of 20 K/min and hexagonal at cooling rates of 40 and 50 K/min. These three crystal morphologies thus obtained at different cooling rates respectively corresponded to the orthorhombic, cubic and hexagonal crystal structures of perovskite. The observed change in the structure of perovskite could probably be attributed to the deficiency of O^2-, when Ti2O3 was involved in the formation of perovskite.

Crystallization thermodynamics of 2,4(5)-dinitroimidazole in binary solvents

2,4(5)-Dinitroimidazole(2,4(5)-DNI)is an important organic intermediate,and itself can also be used for energetic material.In this work,the solubility of 2,4(5)-DNI in(methanol+water,acetonitrile+water,acetone+water)binary solvents were measured by using a dynamic test method from 278.15 K to 323.15 K under 101.1 k Pa.The Jouyban–Acree model,van't Hoff–Jouyban–Acree model,Apelblat–Jouyb an–Acree model,Ma model,and Sun model were used to correlate the experimental data.The values of relative average deviation(RAD)and root-mean-square deviation(RMSD)were very small,indicating that the error between the experimental value and the correlated value was very small.The thermodynamic parameters such as dissolution enthalpy,dissolution entropy and Gibbs energy were calculated based on solubility data.High-purity of 2,4(5)-DNI was efficiently obtained by using cooling and dilution crystallization method.

Crystallization thermodynamics of 2,4(5)-dinitroimidazole in eleven pure solvents

2,4(5)-Dinitroimidazole(2,4(5)-DNI) is an important energetic material, and it is also an important precursor for the preparation of drugs and energetic materials. In this study, the solubility of 2,4(5)-DNI in eleven pure solvents(chlorobenzene, benzene, 1,2-dichloroethane, toluene, water, isopropyl alcohol,ethyl acetate, acetonitrile, methanol, 1,4-dioxane and acetone) were measured by using a dynamic test method from 278.15 K to 323.15 K under 101.1 kPa. Four solubility models were used to fit the experimental data, which were ideal model, modified Apelblat equation, polynomial empirical equation, and λh equation. Meanwhile, the relative average deviation and root-mean-square deviation between the experimental data and the fitted data were also calculated. Furthermore, the three thermodynamic parameters,i.e., dissolution enthalpy, dissolution entropy and Gibbs energy were obtained based on solubility data.Finally, the crude product of 2,4(5)-DNI was crystallized with acetone as solvent, and the purity of the crystalline product was greater than 99.5%.

Polymeric hollow fiber membrane for cooling crystallization seeding:On the mechanism of induced nucleation based on thermal transfer Author links open overlay panel

Cooling crystallization is an important separation process and particuology technology that requires accurate nucleation control strategies.Herein,we introduced the polymeric hollow fiber membrane with proper thermal properties as the effective nucleation induction interface during cooling crystallization.The heterogeneous nucleation control mechanism was introduced based on classical nucleation theory and the thermal transfer process.Interfacial properties and the thermal conductivity of two kinds of polymeric membranes,polytetrafluoroethylene(PTFE)and polyethersulfone(PES),were measured and simulated with the developed model.These two membranes possessed different nucleation induction periods,nucleation rates and crystallization performances,which validated that the hollow fiber membrane module could effectively accelerate the nucleation process compared to conventional cooling crystallization owing to the shorter nucleation induction period and the reduced solution surface tension.Due to the higher hydrophobicity and the lower roughness of the membrane surface,the PTFE membrane possessed a more moderate performance in generating stable heterogeneous nucleation than the one of PES membrane.Thus,the adjustable membrane property enabled the hollow fiber membrane-assisted cooling crystallization to possess the accurate nucleation control and desired terminal particle products.

Simultaneous characterization of multiple properties of solid and liquid phases in crystallization processes using NIR

Near infrared spectroscopy （NIR） is now probably the most popular process analytical technology （PAT） for pharmaceutical and some other industries. However, unlike mid-IR, NIR is known to have difficulties in monitoring crystallization or precipitation processes because the existence of solids could cause distortion of the spectra. This phenomenon, seen as unfavorable previously, is however an indication that NIR spectra contain rich information about both solids and liquids, giving the possibility of using the same instrument for multiple property characterization. In this study, transflectance NIR calibration data was obtained using solutions and slurries of varied solution concentration, particle size, solid concentration and temperature. The data was used to build calibration models for prediction of the multiple properties of both phases. Predictive models were developed for this challenging application using an approach that combines genetic algorithm （GA） and support vector machine （SVM）. GA is used for wavelength selection and SVM for mode building. The new GA-SVM approach is shown to outperform other methods including GA-PLS （partial least squares） and traditional SVM. NIR is thus successfully applied to monitoring seeded and unseeded cooling crystallization processes of L-glutamic acid.

Green process to recover magnesium chloride from residue solution of potassium chloride production plant

The green process to recover magnesium chlor-ide from the residue solution of a potassium chloride pro-duction plant,which comes from the leach solution of a potash mine in Laos,is designed and optimized.The res-idue solution contains magnesium chloride above 25 wt-%,potassium chloride and sodium chloride together below 5 wt-%and a few other ions such as Br-,SO_(2)-4and Ca2+.The recovery process contains two steps:the previous impurity removal operation and the two-stage evapora-tion-cooling crystallization procedure to produce magnes-ium chloride.The crystallized impurity carnallite obtained from the first step is recycled to the potassium chloride plant to recover the potassium salt.The developed process is a zero discharge one and thus fulfills the requirements for green chemical industrial production.The produced magnesium chloride is up to industrial criteria.