Cooperative Rate Splitting Transmit Design for Full-Duplex-Enabled Multiple Multicast Communication Systems

This paper examines the performance of Full-Duplex Cooperative Rate Splitting(FD-CRS)with Simultaneous Wireless Information and Power Transfer(SWIPT)support in Multiple Input Single Output(MISO)networks.In a Rate Splitting Multiple Access(RSMA)multicast system with two local users and one remote user,the common data stream contains the needs of all users,and all users can decode the common data stream.Therefore,each user can receive some information that other users need,and local users with better channel conditions can use this information to further enhance the reception reliability and data rate of users with poor channel quality.Even using Cell-Center-Users(CCUs)as a cooperative relay to assist the transmission of common data can improve the average system speed.To maximize the minimum achievable rate,we optimize the beamforming vector of Base Station(BS),the common streamsplitting vector,the cooperative distributed beamvector and the strong user transmission power under the power budget constraints of BS and relay devices and the service quality requirements constraints of users.Since the whole problem is not convex,we cannot solve it directly.Therefore,we propose a low complexity algorithm based on Successive Convex Approximation(SCA)technology to find the optimal solution to the problemunder consideration.The simulation results show that FD C-RSMA has better gain andmore powerful than FD C-NOMA,HD C-RSMA,RSMA and NOMA.

Joint computation offloading and parallel scheduling to maximize delay-guarantee in cooperative MEC systems

The growing development of the Internet of Things(IoT)is accelerating the emergence and growth of new IoT services and applications,which will result in massive amounts of data being generated,transmitted and pro-cessed in wireless communication networks.Mobile Edge Computing(MEC)is a desired paradigm to timely process the data from IoT for value maximization.In MEC,a number of computing-capable devices are deployed at the network edge near data sources to support edge computing,such that the long network transmission delay in cloud computing paradigm could be avoided.Since an edge device might not always have sufficient resources to process the massive amount of data,computation offloading is significantly important considering the coop-eration among edge devices.However,the dynamic traffic characteristics and heterogeneous computing capa-bilities of edge devices challenge the offloading.In addition,different scheduling schemes might provide different computation delays to the offloaded tasks.Thus,offloading in mobile nodes and scheduling in the MEC server are coupled to determine service delay.This paper seeks to guarantee low delay for computation intensive applica-tions by jointly optimizing the offloading and scheduling in such an MEC system.We propose a Delay-Greedy Computation Offloading(DGCO)algorithm to make offloading decisions for new tasks in distributed computing-enabled mobile devices.A Reinforcement Learning-based Parallel Scheduling(RLPS)algorithm is further designed to schedule offloaded tasks in the multi-core MEC server.With an offloading delay broadcast mechanism,the DGCO and RLPS cooperate to achieve the goal of delay-guarantee-ratio maximization.Finally,the simulation results show that our proposal can bound the end-to-end delay of various tasks.Even under slightly heavy task load,the delay-guarantee-ratio given by DGCO-RLPS can still approximate 95%,while that given by benchmarked algorithms is reduced to intolerable value.The simulation results are demonstrated the effective-ness of DGCO-RLPS for delay guarantee in MEC.

Resilience-driven cooperative reconfiguration strategy for unmanned weapon system-of-systems

As the unmanned weap system-of systems(UWSoS)becomes complex,the inevitable uncertain interference gradu-ally increases,which leads to a strong emphasis on the resilience of UWSoS.Hence,this paper presents a resilience-driven cooperative reconfiguration strategy to enhance the resilience of UWSoS.First,a unified resilience-driven coopera-tive reconfiguration strategy framework is designed to guide the UWSoS resilience enhancement.Subsequently,a cooperative reconfiguration strategy algorithm is proposed to identify the optimal cooperative reconfiguration sequence,combining the cooperative pair resilience contribution index(CPRCI)and coop-erative pair importance index(CPII).At last,the effectiveness and superiority of the proposed algorithm are demonstrated through various attack scenario simulations that include differ-ent attack modes and intensities.The analysis results can pro-vide a reference for decision-makers to manage UWSoS.

Robust adaptive leaderless consensus of unknown non-minimum phase linear multi-agent systems subject to disturbances and/or unmodeled dynamics

This article investigates the problem of robust adaptive leaderless consensus for heterogeneous uncertain nonminimumphase linear multi-agent systems over directed communication graphs. Each agent is assumed tobe of unknown nominal dynamics and also subject to external disturbances and/or unmodeled dynamics. Anovel distributed robust adaptive control strategy is proposed. It is shown that the robust adaptive leaderlessconsensus problem is solved with the proposed control strategy under some sufficient conditions. Two examplesare provided to demonstrate the efficacy of the proposed control strategy.

Cooperative Distributed Beamforming Design for Multi-RIS Aided Cell-Free Systems

Cell-free systems significantly improve network capacity by enabling joint user service without cell boundaries,eliminating intercell interference.However,to satisfy further capacity demands,it leads to high-cost problems of both hardware and power consumption.In this paper,we investigate multiple reconfigurable intelligent surfaces(RISs)aided cell-free systems where RISs are introduced to improve spectrum efficiency in an energy-efficient way.To overcome the centralized high complexity and avoid frequent information exchanges,a cooperative distributed beamforming design is proposed to maximize the weighted sum-rate performance.In particular,the alternating optimization method is utilized with the distributed closed-form solution of active beamforming being derived locally at access points,and phase shifts are obtained centrally based on the Riemannian conjugate gradient(RCG)manifold method.Simulation results verify the effectiveness of the proposed design whose performance is comparable to the centralized scheme and show great superiority of the RISs-aided system over the conventional cellular and cell-free system.

Energy Efficiency in ARQ-Based Multi-Hop Systems and the Tradeoff with Throughput

The minimum energy per bit(EPB)as the energy efficiency(EE)metric in an automatic retransmission request(ARQ)based multi-hop system is analyzed under power and throughput constraints.Two ARQ protocols including type-I(ARQ-I)and repetition redundancy(ARQ-RR)are considered and expressions for the optimal power allocation(PA)are obtained.Using the obtained optimal powers,the EE-throughput tradeoff(EETT)is analyzed and the EETT closed-form expressions for both ARQ protocols and in arbitrary average channel gain values are obtained.It is shown that how different throughput requirements,especially the high levels,affect the EE performance.Additionally,asymptotic analysis is made in the feasible high throughput values and lower and upper EETT bounds are derived for ARQ-I protocol.To evaluate the EE a distributed PA scenario,as a benchmark,is presented and the energy savinggain obtained from the optimal PA in comparison with the distributed PA for ARQ-I and ARQ-RR protocols is discussed in different throughput values and node locations.

Optimization Task Scheduling Using Cooperation Search Algorithm for Heterogeneous Cloud Computing Systems

Cloud computing has taken over the high-performance distributed computing area,and it currently provides on-demand services and resource polling over the web.As a result of constantly changing user service demand,the task scheduling problem has emerged as a critical analytical topic in cloud computing.The primary goal of scheduling tasks is to distribute tasks to available processors to construct the shortest possible schedule without breaching precedence restrictions.Assignments and schedules of tasks substantially influence system operation in a heterogeneous multiprocessor system.The diverse processes inside the heuristic-based task scheduling method will result in varying makespan in the heterogeneous computing system.As a result,an intelligent scheduling algorithm should efficiently determine the priority of every subtask based on the resources necessary to lower the makespan.This research introduced a novel efficient scheduling task method in cloud computing systems based on the cooperation search algorithm to tackle an essential task and schedule a heterogeneous cloud computing problem.The basic idea of thismethod is to use the advantages of meta-heuristic algorithms to get the optimal solution.We assess our algorithm’s performance by running it through three scenarios with varying numbers of tasks.The findings demonstrate that the suggested technique beats existingmethods NewGenetic Algorithm(NGA),Genetic Algorithm(GA),Whale Optimization Algorithm(WOA),Gravitational Search Algorithm(GSA),and Hybrid Heuristic and Genetic(HHG)by 7.9%,2.1%,8.8%,7.7%,3.4%respectively according to makespan.

SR-DCSK Cooperative Communication System with Code Index Modulation:A New Design for 6G New Radios

This paper proposes a high-throughput short reference differential chaos shift keying cooperative communication system with the aid of code index modulation,referred to as CIM-SR-DCSK-CC system.In the proposed CIM-SR-DCSK-CC system,the source transmits information bits to both the relay and destination in the first time slot,while the relay not only forwards the source information bits but also sends new information bits to the destination in the second time slot.To be specific,the relay employs an N-order Walsh code to carry additional log_(2)N information bits,which are superimposed onto the SRDCSK signal carrying the decoded source information bits.Subsequently,the superimposed signal carrying both the source and relay information bits is transmitted to the destination.Moreover,the theoretical bit error rate(BER)expressions of the proposed CIMSR-DCSK-CC system are derived over additive white Gaussian noise(AWGN)and multipath Rayleigh fading channels.Compared with the conventional DCSKCC system and SR-DCSK-CC system,the proposed CIM-SR-DCSK-CC system can significantly improve the throughput without deteriorating any BER performance.As a consequence,the proposed system is very promising for the applications of the 6G-enabled lowpower and high-rate communication.

A collaborative approach to integrated energy systems that consider direct trading of multiple energy derivatives

The cooperative model of a multi-subject Regional Integrated Energy System(RIES)is no longer limited to the trading of traditional energy,but the trading of new energy derivatives such as Green Certificates(GC),Service Power(SP),and CO_(2) will be more involved in the energy allocation of the cooperative model.This study was conducted for the multi-entity RIES cooperative model considering the trading of electronics,GC,SP,and CO_(2).First,a cooperative framework including wind-photovoltaic generation system(WG),combined heat and power system(CHP),and power-carbon-hydrogen load(PCH)is proposed,and the mechanism of energy derivatives trading is also analyzed.Then,the sub-models of each agent in the cooperative model are established separately so that WG has the capability of GC generation,CHP has the capability of GC and CO_(2) absorption,and PCH can realize the effective utilization of CO_(2).Then,the WG–CHP–PCH cooperative model is established and equated into two sub-problems of cooperative benefit maximization and transaction payment negotiation,which are solved in a distributed manner by the alternating directed multiplier method(ADMM).Finally,the effectiveness of the proposed cooperative model and distributed solution is verified by simulation.The simulation results show that the WG–CHP–PCH cooperative model can substantially improve the operational efficiency of each agent and realize the efficient redistribution of energy and its derivatives.In addition,the dynamic parameter adjustment algorithm(DP)is further applied in the solving process to improve its convergence speed.By updating the step size during each iteration,the computational cost,the number of iterations,and the apparent oscillations are reduced,and the convergence performance of the algorithm is improved.

Cooperative game theory-based steering law design of a CMG system

Spacecraft require a large-angle manoeuvre when performing agile manoeuvring tasks, therefore a control moment gyroscope(CMG) is employed to provide a strong moment.However, the control of the CMG system easily falls into singularity, which renders the actuator unable to output the required moment. To solve the singularity problem of CMGs, the control law design of a CMG system based on a cooperative game is proposed. First, the cooperative game model is constructed according to the quadratic programming problem, and the cooperative strategy is constructed. When the strategy falls into singularity, the weighting coefficient is introduced to carry out the strategy game to achieve the optimal strategy. In theory, it is proven that the cooperative game manipulation law of the CMG system converges, the sum of the CMG frame angular velocities is minimized, the energy consumption is small, and there is no output torque error. Then, the CMG group system is simulated.When the CMG system is near the singular point, it can quickly escape the singularity. When the CMG system falls into the singularity, it can also escape the singularity. Considering the optimization of angular momentum and energy consumption, the feasibility of the CMG system steering law based on a cooperative game is proven.

Delivery Invoice Information Classification System for Joint Courier Logistics Infrastructure

With the growth of the online market,demand for logistics and courier cargo is increasing rapidly.Accordingly,in the case of urban areas,road congestion and environmental problems due to cargo vehicles are mainly occurring.The joint courier logistics system,a plan to solve this problem,aims to establish an efficient logistics transportation system by utilizing one joint logistics delivery terminal by several logistics and delivery companies.However,several courier companies use different types of courier invoices.Such a system has a problem of information data transmission interruption.Therefore,the data processing process was systematically analyzed,a practically feasible methodology was devised,and delivery invoice information processing standards were established for this.In addition,the importance of this paper can be emphasized in terms of data processing in the logistics sector,which is expected to grow rapidly in the future.The results of this study can be used as basic data for the implementation of the logistics joint delivery terminal system in the future.And it can be used as a basis for securing the operational reliability of the joint courier logistics system.

MUTS-Based Cooperative Target Stalking for A Multi-USV System

This paper is concerned with the cooperative target stalking for a multi-unmanned surface vehicle(multi-USV)system.Based on the multi-agent deep deterministic policy gradient(MADDPG)algorithm,a multi-USV target stalking(MUTS)algorithm is proposed.Firstly,a V-type probabilistic data extraction method is proposed for the first time to overcome shortcomings of the MADDPG algorithm.The advantages of the proposed method are twofold:1)it can reduce the amount of data and shorten training time;2)it can filter out more important data in the experience buffer for training.Secondly,in order to avoid the collisions of USVs during the stalking process,an action constraint method called Safe DDPG is introduced.Finally,the MUTS algorithm and some existing algorithms are compared in cooperative target stalking scenarios.In order to demonstrate the effectiveness of the proposed MUTS algorithm in stalking tasks,mission operating scenarios and reward functions are well designed in this paper.The proposed MUTS algorithm can help the multi-USV system avoid internal collisions during the mission execution.Moreover,compared with some existing algorithms,the newly proposed one can provide a higher convergence speed and a narrower convergence domain.

Design and Implementation of Multi-collaborative Training System

With the rapid development of computer technology,network and information technology have been widely used in people’s daily lives,which has brought great convenience to labor and life.At the same time,people are increasingly dependent on computer technology.In this case,the social demand for computer professionals is increasing.However,due to the rapid changes and continuous updates of computer technology,the training of talents in computer specialty in China is far from meeting the demand and quality requirements of the society for this kind of talents.Colleges and universities are the important departments that cultivate computer professionals and technicians for the society.When cultivating talents in computer specialty,colleges and universities must conform to the requirements of the development of the times,adjust teaching strategies in a timely manner according to the actual needs of the society,build a talent training system,build a practical training teaching system of computer specialty,innovate teaching modes and teaching contents,and improve students’professional skills through perfect practical teaching,so as to ensure that they can skillfully apply computer technology to solve practical problems in the learning process and further improve their employment competitiveness.Therefore,this paper analyzes the practical teaching system of computer specialty,puts forward corresponding solutions to the existing problems,constructs a multi-collaborative practical training system,and implements the system.The implementation results show that the system can better meet the needs of students at different levels,and the results are fairer.Students’recognition and sense of acquisition of courses have also been greatly improved.The accumulated experience and data also provide good support for our continuous improvement of the system in the future.

Multi-subject and multi-objective integrated optimization system and implementation strategy for energy-saving renovation of the existing residential buildings

The core of the healthy and orderly operation of the existing residential building energy-saving renovation market lies in the exploration of the implementation mechanism of multi-subject and multi-objective integrated optimization.The multi-agent and multi-objective integrated optimization system framework is a powerful tool to guide the scientific decision-making of the market core structural entities in the future market practice. This paper analyzes the practical dilemma of energy-saving renovation of theexisting residential buildings in China, summarizes the practical experience of multi-subject and multi-objective integrated optimization of energy-saving renovation of the existing residential buildings in foreign countries, and puts forward beneficial practical enlightenment on the basis of comparison at home and abroad;The design principles of the target integrated optimization system have established a multi-subject and multi-objective integrated optimization system framework for the energy-saving renovation of the existing residential buildings, from six aspects: government guidance, trust consensus, value co-creation, risk sharing, revenue sharing, and social responsibility sharing. This paper proposes a multi-subject and multi-objective integrated practice strategy, in order to promote the efficient and orderly development of China's existing residential building energy-saving renovation market.

Research on the cooperative train control method in the metro system for energy saving

Purpose–To address the problem that the current train operation mode that train selects one of several offline pre-generated control schemes before the departure and operates following the scheme after the departure,energy-saving performance of the whole metro system cannot be guaranteed.Design/methodology/approach–A cooperative train control framework is formulated to regulate a novel train operation mode.The classic train four-phase control strategy is improved for generating specific energy-efficient control schemes for each train.An improved brute force(BF)algorithm with a two-layer searching idea is designed to solve the optimisation model of energy-efficient train control schemes.Findings–Case studies on the actual metro line in Guangzhou,China verify the effectiveness of the proposed train control methods compared with four-phase control strategy under different kinds of train operation scenarios and calculation parameters.The verification on the computation efficiency as well as accuracy of the proposed algorithm indicates that it meets the requirement of online optimisation.Originality/value–Most existing studies optimised energy-efficient train timetable or train control strategies through an offline process,which has a defect in coping with the disturbance or delays effectively and promptly during real-time train operation.This paper studies an online optimisation of cooperative train control based on the rolling optimisation idea,where energy-efficient train operation can be realised once train running time is determined,thus mitigating the impact of unpredictable operation situations on the energy-saving performance of trains.

Evaluation of Linear Precoding Schemes for Cooperative Multi-Cell MU MIMO in Future Mobile Communication Systems

In Mobile Communication Systems, inter-cell interference becomes one of the challenges that degrade the system’s performance, especially in the region with massive mobile users. The linear precoding schemes were proposed to mitigate interferences between the base stations (inter-cell). These schemes are categorized into linear and non-linear;this study focused on linear precoding schemes, which are grounded into three types, namely Zero Forcing (ZF), Block Diagonalization (BD), and Signal Leakage Noise Ratio (SLNR). The study included the Cooperative Multi-cell Multi Input Multi Output (MIMO) System, whereby each Base Station serves more than one mobile station and all Base Stations on the system are assisted by each other by shared the Channel State Information (CSI). Based on the Multi-Cell Multiuser MIMO system, each Base Station on the cell is intended to maximize the data transmission rate by its mobile users by increasing the Signal Interference to Noise Ratio after the interference has been mitigated due to the usefully of linear precoding schemes on the transmitter. Moreover, these schemes used different approaches to mitigate interference. This study mainly concentrates on evaluating the performance of these schemes through the channel distribution models such as Ray-leigh and Rician included in the presence of noise errors. The results show that the SLNR scheme outperforms ZF and BD schemes overall scenario. This implied that when the value of SNR increased the performance of SLNR increased by 21.4% and 45.7% for ZF and BD respectively.

Cooperative Relaying in a Three User Downlink NOMA System Using Dynamic Power Allocation

Non-orthogonal multiple access(NOMA)represents the latest addition to the array of multiple access techniques,enabling simultaneous servicing of multiple users within a singular resource block in terms of time,frequency,and code.A typical NOMA configuration comprises a base station along with proximate and distant users.The proximity users experience more favorable channel conditions in contrast to distant users,resulting in a compromised performance for the latter due to the less favorable channel conditions.When cooperative communication is integrated with NOMA,the overall system performance,including spectral efficiency and capacity,is further elevated.This study introduces a cooperative NOMA setup in the downlink,involving three users,and employs dynamic power allocation(DPA).Within this framework,User 2 acts as a relay,functioning under the decode-and-forward protocol,forwarding signals to both User 1 and User 3.This arrangement aims to bolster the performance of the user positioned farthest from the base station,who is adversely affected by weaker channel conditions.Theoretical and simulation outcomes reveal enhancements within the system’s performance.

Communication Resource-Efficient Vehicle Platooning Control With Various Spacing Policies

Platooning represents one of the key features that connected automated vehicles may possess as it allows multiple automated vehicles to be maneuvered cooperatively with small headways on roads. However, a critical challenge in accomplishing automated vehicle platoons is to deal with the effects of intermittent and sporadic vehicle-to-vehicle data transmissions caused by limited wireless communication resources. This paper addresses the co-design problem of dynamic event-triggered communication scheduling and cooperative adaptive cruise control for a convoy of automated vehicles with diverse spacing policies. The central aim is to achieve automated vehicle platooning under various gap references with desired platoon stability and spacing performance requirements, while simultaneously improving communication efficiency. Toward this aim, a dynamic event-triggered scheduling mechanism is developed such that the intervehicle data transmissions are scheduled dynamically and efficiently over time. Then, a tractable co-design criterion on the existence of both the admissible event-driven cooperative adaptive cruise control law and the desired scheduling mechanism is derived. Finally, comparative simulation results are presented to substantiate the effectiveness and merits of the obtained results.

Cooperative UAV search strategy based on DMPC-AACO algorithm in restricted communication scenarios

Improvement of integrated battlefield situational awareness in complex environments involving dynamic factors such as restricted communications and electromagnetic interference(EMI)has become a contentious research problem.In certain mission environments,due to the impact of many interference sources on real-time communication or mission requirements such as the need to implement communication regulations,the mission stages are represented as a dynamic combination of several communication-available and communication-unavailable stages.Furthermore,the data interaction between unmanned aerial vehicles(UAVs)can only be performed in specific communication-available stages.Traditional cooperative search algorithms cannot handle such situations well.To solve this problem,this study constructed a distributed model predictive control(DMPC)architecture for a collaborative control of UAVs and used the Voronoi diagram generation method to re-plan the search areas of all UAVs in real time to avoid repetition of search areas and UAV collisions while improving the search efficiency and safety factor.An attention mechanism ant-colony optimization(AACO)algorithm is proposed for UAV search-control decision planning.The search strategy is adaptively updated by introducing an attention mechanism for regular instruction information,a priori information,and emergent information of the mission to satisfy different search expectations to the maximum extent.Simulation results show that the proposed algorithm achieves better search performance than traditional algorithms in restricted communication constraint scenarios.

STABILITY ANALYSIS AND COOPERATIVE CONTROL OF DISTRIBUTED MULTI-AGENT SYSTEM WITH SAMPLED COMMUNICATION

The cooperative control and stability analysis problems for the multi-agent system with sampled com- munication are investigated. Distributed state feedback controllers are adopted for the cooperation of networked agents. A theorem in the form of linear matrix inequalities（LMI） is derived to analyze the system stability. An- other theorem in the form of optimization problem subject to LMI constraints is proposed to design the controller, and then the algorithm is presented. The simulation results verify the validity and the effectiveness of the pro- posed approach.