A core-shell copper oxides-cobalt oxides heterostructure nanowire arrays for nitrate reduction to ammonia with high yield rate

Electrochemical nitrate reduction to ammonia(NRA) can realize the green synthesis of ammonia(NH3) at ambient conditions, and also remove nitrate contamination in water. However, the current catalysts for NRA still face relatively low NH3yield rate and poor stability. We present here a core-shell heterostructure comprising cobalt oxide anchored on copper oxide nanowire arrays(CuO NWAs@Co_(3)O_(4)) for efficient NRA. The CuO NWAs@Co_(3)O_(4)demonstrates significantly enhanced NRA performance in alkaline media in comparison with plain CuO NWAs and Co_(3)O_(4)flocs. Especially, at-0.23 V vs. RHE, NH_(3) yield rate of the CuO NWAs@Co_(3)O_(4)reaches 1.915 mmol h^(-1)cm^(-2),much higher than those of CuO NWAs(1.472 mmol h^(-1)cm^(-2)), Co_(3)O_(4)flocs(1.222 mmol h^(-1)cm^(-2)) and recent reported Cu-based catalysts.It is proposed that the synergetic effects of the heterostructure combing atom hydrogen adsorption and nitrate reduction lead to the enhanced NRA performance.

The Antibacterial Activities of Copper Oxide Nanoparticles Synthesized Using Laser Ablation in Different Surfactants against Streptococcus mutans

Copper oxide nanoparticles(CuO NPs)were synthesised with laser ablation of a copper sheet immersed in deionized water(DW),cetrimonium bromide(CTAB),and sodium dodecyl sulphate(SDS),respectively.The target was irradiated with a pulsed Nd:YAG laser at 1064 nm,600 mJ,a pulse duration of 10 ns,and a repetition rate of 5 Hz.The CuO NPs colloidal were analyzed using UV–Vis spectroscopy,the Fourier transform infrared(FTIR)spectrometer,zeta potential(ZP),X-ray diffraction(XRD),transmission electron microscope(TEM)and field emission scanning electron microscopy(FESEM).The absorption spectra of CuO NPs colloidal showed peaks at 214,215 and 220 nm and low-intensity peaks at 645,650 and 680 nm for SDS,CTAB and DW,respectively.CuO NPs’colloidal results are(−21.6,1.2,and 80 mV)for negatively,neutrally,and positively charged SDS,DW,and CTAB,respectively.The XRD pattern of the NPs revealed the presence of CuO phase planes(110)(111),(20-2)and(11-1).The TEM images revealed nearly spherical NPs,with sizes ranging from 10–90,10–50,and 10–210 nm for CuO NPs mixed with DW,SDS and CTAB,respectively.FESEM images of all the synthesized samples illustrate the formation of spherical nanostructure and large particles are observable.The CuO NPs were tested for antibacterial activity against Streptococcus mutans by using the well diffusion method.In this method,CuO NPs prepared in DW at a concentration of 200μg/mL showed a greater inhibition zone against Streptococcus mutans.

Dispersion of copper oxide supported on γ-alumina and its sulfation properties

CuO/γ-Al2O3 catalysts were prepared by impregnation with different CuO loadings. The dispersion of CuO supported on γ-Al2O3 support was studied using X-ray diffraction （XRD）, scanning electron microscopy （SEM）, and temperature programmed reduction （TPR）. The dispersion threshold of CuO in γ-Al2O3 determined by X-ray quantitative analysis was 0.275 g/g, i.e., 0.275CuAl. Highly dispersed CuO or crystalline CuO would appear on the γ-Al2O3 support when CuO loading was below or more than its dispersion threshold. TPR experiments show that reduction peak temperature ranges of 0.1CuAl and pure CuO are 420-690 °C and 290-380 °C, respectively. 0.1CuAl is not easily reduced due to interaction between CuO and γ-Al2O3. 0.5CuAl shows a two-step reduction range during 210-300 °C and 410-730 °C, which confirms the existence of highly dispersed CuO and crystalline CuO. The sulfation experiments show the optimal CuO loading amount is far below its dispersion threshold, and copper oxide supported on γ-Al2O3 is in the form of submonolayer.

Synthesis and characterization of porous cobalt oxide/copper oxide nanoplate as novel electrode material for supercapacitors

A promising Co3O4/Cu O composite electrode material was successfully synthesized through a facile hydrothermal and calcination process. Effects of the surfactants hexadecyltrimethyl ammonium bromide（CTAB） and polyvinylpyrrolidone（PVP） on the morphology and electrochemical performance of the composite were investigated. Powder X-ray diffraction（XRD）, scanning electron microscopy（SEM）, transmission electron microscopy（TEM） and nitrogen adsorption-desorption experiment were employed to characterize the microstructures and morphologies of the composite. Meanwhile, the electrochemical performances of the samples were studied using cyclic voltammetry（CV）, galvanostatic charge-discharge test and electrochemical impedance spectroscopy（EIS）. The results show that the porous Co3O4/Cu O-CTAB nanoplates own the best performance and exhibits a high specific capacitance of 398 F/g at 1 A/g with almost 100% capacitance retention over 2000 cycles, and it retains 90% of capacitance at 10 A/g.

Mechanism and application on sulphidizing flotation of copper oxide with combined collectors

The effect of sodium butyl xanthate (NaBX) and dodecylamine (DDA) as combined collector on the sulphidizing flotation of copper oxide was investigated by flotation test, fluorescent pyrene probe, zeta potential, and infrared spectroscopy analyses. The micro-flotation results show that combined use of NaBX+DDA yields better effect than using NaBX at pH 7-11 only, and the optimal molar ratio of NaBX to DDA is 2: 1. The actual ores flotation shows that when the dosage of NaBX+DDA is (100+54) g/t, the copper concentrate grade and recovery are 15.93% and 76.73%, respectively. The fluorescent pyrene probe test demonstrates that the NaBX+DDA can reduce the micelle concentration in the pulp. The zeta potential and the infrared spectroscopy analyses indicate that chemical adsorption, hydrogen-bonding and electrostatic interaction can help to adsorb NaBX+DDA on the surface of malachite. Meantime, copper xanthate and copper-amine complexes may be generated during the adsorption process.

Technological conditions and kinetics of leaching copper from complex copper oxide ore

The kinetic behavior of leaching copper from low grade copper oxide ore was investigated. The effects of leaching temperature, H2SO4 concentration, particle size of crude ore and agitation rate on the leaching efficiency of copper were also evaluated. And the kinetic equations of the leaching process were obtained. The results show that the leaching process can be described with a reaction model of shrinking core. The reaction can be divided into three stages. The first stage is the dissolution of free copper oxide and copper oxide wrapped by hematite-limonite ore. At this stage, the leaching efficiency is very fast （leaching efficiency is larger than 60%）. The second stage is the leaching of diffiuent copper oxides, whose apparent activation energy is 43.26 kJ/mol. During this process, the chemical reaction is the control step, and the reaction order of H2SO4 is 0.433 84. The third stage is the leaching of copper oxide wrapped by hematite-limonite and silicate ore with apparent activation energy of 16.08 kJ/mol, which belongs to the mixed control.

Flotation of copper oxide minerals:A review

Copper oxide minerals are important copper resources,which include malachite,azurite,chrysocolla,cuprite,etc.Flotation is the most widely used method for the enrichment of copper oxide minerals in the mineral processing industry.In this paper,the surface properties of copper oxide minerals and their effects on the mineral flotation behavior are systematically summarized.The flotation methods of copper oxide minerals and the interaction mechanism with reagents are reviewed in detail.Flotation methods include direct flotation(using chelating reagents or a fatty acid as collector),sulfidization flotation(using xanthate as collector),and activation flotation(using chelating reagents,ammonium/amine salts,metal ions,and oxidant for activation).An effective way to realize efficient flotation of copper oxide minerals is to increase active sites on the surface of copper oxide minerals to enhance the interaction of collector with the mineral surface.Besides,various perspectives for further investigation on the efficient recovery of copper oxide minerals are proposed.

Techniques of copper recovery from Mexican copper oxide ore

Mexican copper ore is a mixed ore containing mainly copper oxide and some copper sulfide that responds well to flotation. The joint techniques of flotation and leaching were studied. The results indicate that an ore containing 19.01% copper could be obtained at a recovery ratio of 35.02% by using sodium sulfide and butyl xanthate flotation. Over 83.33% of the copper oxide can be recovered from the railings by leaching in suitable conditions, such as 1 h stirring at a temperature around 25 ℃with a mixing speed of S00 r/min, an H2SO4 concentration of 1.0 mol/L and a mass ratio of the ore-slurry-liquid to solid （mL/ms） of 3. The overall yield of refined ore after flotation and leaching is over 89.18% of the copper, which is much better than sole flotation or leaching. A copper product containing more than 99.9% copper was obtained by using the process： flotation-agitation leaching- solvent extraction-electro-winning.

Effect of temperature on leaching behavior of copper minerals with different occurrence states in complex copper oxide ores

The effect of temperature on leaching behavior of copper minerals with different occurrence states in complex copper oxide ores was carried out by phase analysis means of XRD, optical microscopy and SEM-EDS. The results indicated that at ambient temperature, the easily leached copper oxide minerals were completely dissolved, while the bonded copper minerals were insoluble. At lukewarm temperature of 40℃, it was mainly the dissolution of copper in isomorphism state. With increasing temperature to 60℃, the copper leaching rate in the adsorbed state was significantly accelerated. In addition, when the temperature increased to 80℃, the isomorphic copper was completely leached, leaving 11.2% adsorbed copper un-leached. However, the copper in feldspar-quartz-copper-iron colloid state was not dissolved throughout the leaching process. Overall, the leaching rates of copper in different copper minerals decreased in the order: malachite, pseudo-malachite > chrysocolla > copper-bearing chlorite > copper-bearing muscovite > copper-bearing biotite > copper-bearing limonite > feldspar-quartz-copper-iron colloid.

Agglomeration and leaching behaviors of copper oxides with different chemical binders

The chemical binder is one of the critical factors affecting ore agglomeration behavior and leaching efficiency.In this study,we in-vestigated the effect of the type of binder and mass fraction of the H_(2)SO_(4)solution used on the curing,soaking,and leaching behavior of ag-glomerations.The results revealed that Portland cement(3CaO·SiO_(2),2CaO·SiO_(2),and 3CaO·Al_(2)O_(3))was the optimal binder for obtaining a well-shaped,stable agglomeration structure.A higher extraction rate was achieved when using Portland cement than that obtained using sodi-um silicate,gypsum,or acid-proof cement.An excessive geometric mean size is not conducive to obtaining well-shaped agglomerations and desirable porosity.Using computed tomography(CT)and MATLAB,the porosity of two-dimensional CT images in sample concentrations L1-L3 was observed to increase at least 4.5vol%after acid leaching.Ore agglomerations began to be heavily destroyed and even to disinteg-rate when the sulfuric acid solution concentration was higher than 30 g/L,which was caused by the excessive accumulation of reaction products and residuals.

Electric-magnetic-force characteristics of rare earth barium copper oxide superconductor high-field coils based on screening effect and strain sensitivity

Rare earth barium copper oxide(REBCO)is the most researched and commercialized second-generation high-temperature superconducting material.Due to the anisotropic structure,strong deformation sensitivity,and central field errors caused by screening current effects,it is still a challenge for commercialization applications.In this study,the transversely isotropic constitutive relationship is selected as the mechanical model based on the structural characteristics of REBCO tapes,and suitable microelements are selected to equate the elastic constants using their average stress-strain relationships.Then,a two-dimensional axisymmetric model for coils wound by single-layer tapes is constructed to analyze the dependence of the electric-magnetic-force distribution in the tape on the strain.Finally,the anisotropic approximation of the homogenized bulk method is used to equate large-turn high-field coils,and the electric-magnetic-force distribution characteristics of the coils with/without screening effects and mechanical strain conditions are investigated,respectively.The results reveal that the mechanical strain has a weakening effect on the electromagnetic field distribution of superconducting tapes,but causes a significant enhancement in the force field distribution.In the presence of 0.5% mechanical strain,the maximum weakening of the peak value of the current density and the critical current density inside the high-field coil can reach about 8% and 13%,respectively,with a nearly 5 times increase in the peak stress.The screening current makes the current field distribution inside the coil improve by about 10 times.The screening current induced magnetic field can reach up to 0.8 T,making the relative error of the high-field coil center up to 7.8%.

Preparation of chain copper oxide nanoparticles by microwave

Cu（OH）2 nano-fibers were prepared by chemical precipitation with CuSO4·5H2O and NaOH as raw materials. The Cu（OH）2 nano-fibers have a diameter of 10-30 nm and a length of 1-6 μm. The reaction conditions were as follows： the concentration of CuSO4 solution was 0.1 mol·L^-1,NaOH solution 4 mol·L^-1,the dropping rate of the NaOH solution 50 mL·min^-1,the reaction temperature 20℃the pH value of the reaction terminal 13,and the stirring rate 1200 r·min^-1. The chain nano-CuO grains were obtained through the microwave radiation of the Cu（OH）2 nano-fibers.

Recovery prediction of copper oxide ore column leaching by hybrid neural genetic algorithm

The artificial neural network(ANN)and hybrid of artificial neural network and genetic algorithm(GANN)were appliedto predict the optimized conditions of column leaching of copper oxide ore with relations of input and output data.The leachingexperiments were performed in three columns with the heights of2,4and6m and in particle size of<25.4and<50.8mm.Theeffects of different operating parameters such as column height,particle size,acid flow rate and leaching time were studied tooptimize the conditions to achieve the maximum recovery of copper using column leaching in pilot scale.It was found that therecovery increased with increasing the acid flow rate and leaching time and decreasing particle size and column height.Theefficiency of GANN and ANN algorithms was compared with each other.The results showed that GANN is more efficient than ANNin predicting copper recovery.The proposed model can be used to predict the Cu recovery with a reasonable error.

Quench characteristics and mechanical responses during quench propagation in rare earth barium copper oxide pancake coils

Quench and mechanical behaviors are critical issues in high temperature superconducting(HTS)coils.In this paper,the quench characteristics in the rare earth barium copper oxide(REBCO)pancake coil at 4.2K are analyzed,and a two-dimensional(2D)axisymmetric electro-magneto-thermal model is presented.The effects of the constituent materials,background field,and coil size are analyzed.An elastoplastic mechanical model is used to study the corresponding mechanical responses during the quench propagation.The variations of the temperature and strain in superconducting layers are compared.The results indicate that the radial strain evolutions can reflect the transverse quench propagation and the tensile hoop and radial stresses in superconducting layers increase with the quench propagation.The possible damages are discussed with the consideration of the effects of the background field and coil size.It is concluded that the high background field significantly increases the maximum tensile hoop and radial stresses in quenching coils and local damage may be caused.

Bioleaching of a kind of alkaline mixed copper oxide and sulphide mineral

We conducted two-stage acidification-bioleaching experiments to probe the feasibility of bioleaching for a kind of mixed alkaline copper oxide and sulphide mineral. We used the uniform design method for data analysis and experimental optimization, with initial pH value, pulp density, inoculation of bacteria and ferrous iron concentration selected as the influential factors. Polynomial regression shows that the four factors sequentially influence the copper recovery by 14.430%, 8.555%, 1.982% and 3.895%. Acid equilibrium in the bioleaching system is mainly influenced by alkaline gangue content, chemical reactions and bacterial activity. A maximal portion of refractory copper extracted reaches 71.08%. The dynamic analysis of copper recovery indicates that bioleaching goes through a lag leaching phase, prime leaching phase and leaching stationary phase corresponding to the growth phases of bacteria. Compared with the predicted value of 80.87%, the confirmatory experiment observes a 78.21% copper recovery under the optimal conditions of pH of 1.5, pulp density of 5%, bacteria inoculation of 30% and initial ferrous iron concentration of 9 g L-1. Results suggest that bioleaching is technically feasible to improving total copper recovery.

Comparison of desulfurization kinetics of copper oxide sorbent

Desulfurization experiments of CuO, γ-Al2O3 and CuO/γ-Al2O3 were made in simulated flue gas by means of thermogravimetric analysis. It is found that reaction activities of CuO supported on γ-Al2O3 could be highly improved. Desulfurization kinetics of CuO/γ-Al2O3 was studied in the temperature range of 250 °C-400 °C and SO2 concentration of 0.1%-0.9%. The experimental data were tested and compared with kinetics models of volume reaction model(VRM), grain size model(GSM), random pore model(RPM) and pore-blocking model(PBM). Correlation analysis shows that VRM and RPM models do not fit experimental data well. GSM contradicts with the changes in the physical and chemical properties of Cu O/γ-Al2O3 as the desulfurization proceeds. It is found that PBM is consistent with the change of pore structure of CuO/γ-Al2O3 sorbent during desulfurization process and predicts the conversion-time curves of the sorbent well. Meanwhile, kinetics parameters are obtained and discussed.

Low temperature H_2S sensor based on copper oxide/tin dioxide thick film

Nanostructured tin dioxide （SnO2） powders were prepared by a sol-gel dialytic process and and the doping of CuO on it was completed by a deposition-precipitation method.The thick film sensors were fabricated from the CuO/SnO2 polycrystalline powders.Sensing behavior of the sensor was investigated with various gases including CO,H2,NH3,hexane,acetone,ethanol,methanol and H2S in air.The as-synthesized gas sensor had much better response to H2S than to other gases.At the same time,the CuO/SnO2 sensor had enough sensitivity,together with fast response and recovery,to distinguish H2S from those gases at 160 and 210 ℃.Therefore,it might have promising applications in the future.

Bioleaching of copper oxide ore by P seudomonas aeruginosa

Bioleaching is an environmentally friendly method for extraction of metal from ores. In this study, bioleaching of copper oxide ore by Pseudomonas aeruginosa was investigated. Pseudomonas aeruginosa is a heterotrophic bactermm that can produce various organic acids in an appropriate culture medium, and these acids can operate as leaching agents. The parameters, such as particle size, glucose percentage in the culture medium, bioleaching time, and solid/liquid ratio were optimized. Optimum bioleaching conditions were found as follows： particle size of 150-177 μm, glucose percentage of 6%, bioleaching time of 8 d, and solid/liquid ratio of 1：80. Under these conditions, 53% of copper was extracted.

Highly effective electrochemical water oxidation by copper oxide film generated in situ from Cu(Ⅱ) tricine complex

Developing highly efficient and stable water oxidation catalysts based on abundant metallic elements is a challenge that must be met to fulfill the promise of water splitting for clean energy production.In this work,we developed an oxygen evolution reaction catalyst consisting of a nanostructured film electrodeposited from a phosphate buffer solution(0.2mol/L,pH=12.0)containing Cu‐tricine complex.A Tafel plot showed that the required overpotential for a current densityof1.0mA/cm2was only395mV and the Tafel slope was46.7mV/decade.In addition,the Cu‐tricine film maintained a stable current density of7.5mA/cm2for the oxygen evolution reaction in phosphate buffer solution for10h,and a Faradaic efficiency of99%was obtained.

Design of Copper Oxide Nanosheets-Loaded Zeolite with Efficient Inhibition of Marine Bacteria

Copper oxide-loaded zeolite 4A nanocomposites(CuO-zeolite NCs)were successfully prepared by modifying zeolite 4A with CuSO_(4)aqueous solution as the copper source.Zeolite 4A showed an important role in hosting copper oxide,and CuO-zeolite NCs exhibited a controlled release of copper ions.XRD patterns confirmed the appearance of new diffraction peaks of copper oxide at 35.83°and 38.83°.CuO nanosheets formed on the surface of zeolite 4A were about 30–40 nm thick over a width of 200–300 nm.CuO-zeolite NCs were primarily composed of Cu,Si,Al and O,as measured by XPS.Cu 2p_(3/2) and Cu 2p_(1/2) peaks were fitted into two main peaks centered at 934.7 eV and 954.6 eV,which were attributed to Cu(II).Zeolite 4A and CuO-zeolite NC displayed reversible Langmuir isotherm(type-I)characteristics and showed maximum adsorption quantities of almost 200 cm^(3) g^(−1) at a relative pressure of 1.0 by CO_(2)adsorption-desorption experiments.The antibacterial efficiencies of the CuO-zeolite NC were 99.4%,96.7%,and 96.8%against Pseudoalteromonas tetraodonis(P.tetraodonis),Micrococcus luteus(M.luteus),and Shewanella putrefaciens(S.putrefaciens),respectively.These values showed that nano CuO-loaded zeolite 4A acted as a strong bactericide against marine bacteria.CuO-zeolite NCs can be further applied to marine antifouling coating.