Study on the Structures and Properties of Copper Removal Adsorbent Prepared from Sinter-free Pulverized Oyster Shell Materials

A hollow tubular copper removal adsorbent was prepared with oyster shell and cement as the main raw materials. The effects of different formulas, different initial copper concentrations and different pH values of samples on the copper removal efficiency were investigated to determine the optimal conditions for copper removal. The content of copper in the wastewater is determined by Atomic Absorption Spectrophotometer. The microstructure and elemental composition of the samples were characterized by scanning electron microscopy（SEM） and EDS. As a result, the formula with the content of cement to be 8 wt% and the oyster shell powder of 92 wt% is optimal. Under the condition of 30 ℃, when the pH value was 9.0, the Cu2＋ adsorption capacity of the sample could reach 0.59 mg/g at 48 h. SEM analysis revealed that there are abundant pores in the sample, which is beneficial for Cu2＋ absorption on the adsorbent.

Copper Removal from Molten Steel by Gasification

A novel method is proposed to enhance the gasification and removal of copper from molten steel by adding ammonium salts or urea into molten steel under normal pressure.The decopperization experiments were conducted in a molybdenum-wire resistance furnace at 1 873 K.The copper content of about 400 g of a mild steel was reduced from 0.49%(mass fraction,the same below) and 0.51% to 0.31% and 0.38% using 0.7 g of NHC1 and 0.5 g of(NH)COrespectively,while the copper content of the molten steel was reduced from 0.61%to 0.56% using 2.00 g of NHCONH.

Study on the Structure and Characteristics of Recyclable Copper Removal Adsorbent

A recyclable copper removal adsorbent was developed from diatomite and alu- minum sludge composite materials. The. effects of different formulas on the adsorption of Cu2~ under different conditions were discussed. The properties and rnicrostructures of the samples were characterized. The results showed that the optimum pH value, contacting time and raw materials proportion for copper removal are 6, 90 min and 40：60 （sludge： diatomite）, respectively, The copper removal capacity could reach 0.46 mg/g at the initial copper concentration of 5 mg/L. There was no change in the composition of crystal phase before and after copper removal, so physical adsorption was dominant during the adsorption process.

Deep removal of copper from nickel electrolyte using manganese sulfide

Copper is difficult to separate from nickel electrolyte due to low concentration of copper (0.53 g/L) with high concentration of nickel (75 g/L). Manganese sulfide (MnS) was used to deeply remove copper from the electrolyte. Experimental results show that the concentration of copper (ρ(Cu)) decreases from 530 to 3 mg/L and the mass ratio of copper to nickel (RCu/Ni) in the residue reaches above 15 when the MnS dosage is 1.4 times the theoretical valueDt,MnS (Dt,MnS=0.74 g) and the pH value of electrolyte is 4?5 with reaction time more than 60 min at temperatures above 60 °C. The concentration of newly generated Mn2+(ρ(Mn)) in the solution is also reduced to 3 mg/L by the oxidation reaction. The values ofρ(Cu),ρ(Mn)andRCu/Ni meet the requirements of copper removal from the electrolyte. It is shown that MnS can be considered a highly effective decoppering reagent.

Preparation and characterization of eco-friendly poly(p-phenylenediamine) and its composite with chitosan for removal of copper ions from aqueous solutions

Poly(p-phenylenediamine)/chitosan (PPPDA/Chi) composite was prepared by in situ chemical oxidative polymerization of p-phenylenediamine (PPPDA) into chitosan (Chi) using ammonium persulphate (APS) as an oxidant. PPPDA and PPPDA/Chi composite were characterized by FT-IR spectra and SEM before and after copper loading. In batch adsorption method, the maximum removal of copper was experienced when 1 g/L of PPPDA and PPPDA/Chi composite dosages were used at pH 5.0 for PPPDA and 6.0 for PPPDA/Chi composite for 360 min for both sorbents. PPPDA showed adsorption capacity qemax of 650 mg/g whereas its composite achieved qemax of 573 mg/g. The experimental data correlate well with the Freundlich isotherm equation and the pseudo-second order kinetic model. The Cu(II), loaded PPPDA and its composite can be efficiently reused for as many as four cycles. The Cu(II)-loaded sorbents showed high antibacterial efficiency against Gram-positive and Gram-negative bacteria than their unloaded forms.

Removal of copper from molybdenite concentrate by mesophilic and extreme thermophilic microorganisms

Mixed mesophilic and extreme thermophilic bioleaching were evaluated to remove copper from the molybdenite concentrate.Bioleaching tests were carried out in shake flasks and in a 50-L bioreactor.The shake flask tests were performed with different inoculum size,solids density,pH.and temperature in order to identify optimum conditions.The highest amount of copper elimination,75%was obtained with extreme thermophilic microorganisms(at 12%inoculation,10%solids,65℃and a pH of 1.5).The highest copper elimination by mesophilic microorganisms was 55%(at 12%inoculation,5%solids,30℃at pH 2).The optimum conditions in shake flask tests were applied to 7 days batch tests in a50-L bioreactor.Extreme thermophilic experiment gave the best copper elimination of 60%(at 12%inoculation,10%solids,65℃and pH 1.5).Mesophilic test removed 50%of the copper(at 12%inoculation,10%solids,35℃at pH 2).

Smelting chlorination method applied to removal of copper from copper slags

In order to reasonably utilize the iron resources of copper slags, the smelting chlorination process was used to remove copper from copper slags. Higher holding temperature and O2 flow rate are beneficial to increasing copper removal rate. However,the Cu2O mode is formed by the reaction of surplus O2 and CuCl with O2 flow rate increasing over 0.4 L/min, causing CuCl volatilization rate and copper removal rate to decrease. The resulting copper removal rate of 84.34% is obtained under the optimum conditions of holding temperature of 1573 K, residence time of 10 min, Ca Cl2 addition amount of 0.1(mass ratio of CaCl2 and the copper slag) and oxygen flow rate of 0.4 L/min. The efficient removal of copper from copper slags through chlorination is feasible.

Study on the mechanism of copper-ammonia complex decomposition in struvite formation process and enhanced ammonia and copper removal

Heavy metals and ammonia are difficult to remove from wastewater,as they easily combine into refractory complexes.The struvite formation method（SFM） was applied for the complex decomposition and simultaneous removal of heavy metal and ammonia.The results indicated that ammonia deprivation by SFM was the key factor leading to the decomposition of the copper-ammonia complex ion.Ammonia was separated from solution as crystalline struvite,and the copper mainly co-precipitated as copper hydroxide together with struvite.Hydrogen bonding and electrostatic attraction were considered to be the main surface interactions between struvite and copper hydroxide.Hydrogen bonding was concluded to be the key factor leading to the co-precipitation.In addition,incorporation of copper ions into the struvite crystal also occurred during the treatment process.

Fixed-bed column study for deep removal of copper(Ⅱ) from simulated cobalt electrolyte using polystyrene-supported 2-aminomethylpyridine chelating resin

This study presents the deep removal of copper (Ⅱ) from the simulated cobalt electrolyte using fabricated polystyrene-supported 2-aminomethylpyridine chelating resin (PS-AMP) in a fixed-bed.The effects of bed height (7.0–14.0 cm),feed flow rate (4.5–9.0 mL/min),initial copper (Ⅱ) concentration of the feed (250–1000 mg/L),feed temperature (25–40 ℃) and the value of pH (2.0–4.0) on the adsorption process of the PS-AMP resin were investigated.The experimental data showed that the PS-AMP resin can deeply eliminate copper (Ⅱ) from the simulated cobalt electrolyte.The bed height,feed flow rate,initial copper (Ⅱ) concentration of the feed,feed temperature and feed pH value which corresponded to the highest removal of copper (Ⅱ) were 7.0 cm with 35 mm of the column diameter,4.5 mL/min,40℃,1000 mg/L and 4.0,respectively.The breakthrough capacity,the saturated capacity of the column and the mass ratio of Cu/Co (g/g) in the saturated resin were correspondingly 16.51 mg/g dry resin,61.72 mg/g dry resin and 37.67 under the optimal experimental conditions.The copper (Ⅱ) breakthrough curves were fitted by the empirical models of Thomas,Yoon-Nelson and Adam-Bohart,respectively.The Thomas model was found to be the most suitable one for predicting how the concentration of copper (Ⅱ) in the effluent changes with the adsorption time.

Deep removal of copper from cobalt sulfate electrolyte by ion-exchange

SP-C was applied for the removal of Cu^2＋ from simulated cobalt sulfate electrolyte containing Co2＋ 50 g/L and Cu2＋ 0.5-2.0 g/L. Experimental conditions included pH of 2-4, temperature of 20-60℃ and contact time of 10-40 min. The investigation demonstrated that SP-C had recommendable efficiency in adsorbing Cu2＋ from the electrolyte with 25- to 100-fold of Co2＋ The optimal adsorption conditions of SP-C were pH of 4, contact time of 30 min and ambient temperature. The study also showed that the loaded resin could be effectively eluted with 2.0 mol/L H2SO4 solution at a contact time of 40 min; the peak concentration of Cu2＋ in the eluate was about 35 g/L. The sorption characteristics of Cu2＋ by SP-C could be described by Langrnuir isotherm and the pseudo second-order kinetic equation. Infrared spectra showed that nitrogen atoms in the functional group coordinated with Cu2＋ to form coordination bands.

Research on Copper Removal from Composite Wires of Copper-Stainless Steel Fibers

A method of copper removal from composite wires of copper stainless steel fibers by means of sulfuric acid solution with hydrogen dioxide is described. After removing copper, the stainless steel fibers remain smooth and uniform, keep high strength and are arranged in order. The copper sulfate with 5 H 2O (CuSO 4 5H 2O) can be crystallized directly from the reaction solution.

ELECTROLYTIC REMOVAL OF COPPER FROM GUANYL-O-ALKYL-ISOUREA COPPER COMPLEX

A facile method for removing copper from guanyl-0-alkylisourea copper complex was found by using electrolysis.The complex was electrolyzed at a copper cathode in dilute hydrochloric or nitric acid to give guanyl-O- alkylisourea salt in high yield and current efficiency.

Removal of Cu2＋ from Aqueous Solutions Using Na-A Zeolite from Oil Shale Ash

Na-A zeolite was synthesized using oil shale ash （OSA）, which is a solid by-product of oil shale proc- essing. The samples were characterized by various techniques, such as scanning electron microscopy, X-ray diffrac- tion and Brunaner Emmet Teller method. The batch isothermal equilibrium adsorption experiments were performed to evaluate the ability of Na-A zeolite for removal of Cu （II） from aqueous solutions. The effects of operating pa- rameters, such as concentration of copper solutions, adsorbent dosages, pH value of solutions and temperature, on the adsorption efficiency were investigated. The equilibrium adsorption data were fitted with Langmuir and Freundlich models. The maximum adsorption capacity of Na-A zeolite obtained from the Langmuir adsorption iso- therm is 156.7 mg.g-t of Cu （lI）. The increase of pH level in the adsorption process suggests that the uptake of heavy metals on the zeolite follows an ion exchange mechanism. The batch kinetic data fit the pseudo-second order equation well. The thermodynamic parameters, such as changes in Gibbs free energy （AG）, enthalpy （AH） and en- tropy （AS）, are used to predict the nature of the adsorption process. The negative AG values at different tempera- tures confirm that the adsorption processes are spontaneous.

Synthesis of novel silica-supported chelating resin containing tert-butyl 2-picolyamino-N-acetate and its properties for selective adsorption of copper from simulated nickel electrolyte

A novel silica-supported tert-butyl 2-picolyamino-N-acetate chelating resin (Si-AMPY-1) was successfully synthesized and characterized by elemental analysis, FT-IR, SEM and 13 C CP/MAS NMR. The adsorption behaviors of the Si-AMPY-1 resin for Cu(Ⅱ) and Ni(Ⅱ) were studied with batch and column methods. The batch experiments indicated that the Si-AMPY-1 resin adsorbed Ni(Ⅱ) mainly via physisorption, while adsorbed Cu(II) via chemisorption. The column dynamic breakthrough curves revealed thatthe Si-AMPY-1 resin can efficiently separate Cu(Ⅱ) from the simulated nickel electrolyte before the breakthrough point. Moreover, the concentration of Cu(Ⅱ) in the column effluent was decreased to be less than 3 mg/L within the first 43 BV (bed volumes), and the mass ratio of Cu/Ni was 21:1 in the saturated resin, which completely satisfied the industrial requirements of the nickel electrorefining process. Therefore, it was concluded that the Si-AMPY-1 resin can be a promising candidate for the deep removal of Cu(Ⅱ) from the nickel electrolyte.

Copper Elimination from the Molten Steel by Addition of Hydronitrogens

A novel method has been proposed to remove copper from molten steel by adding the compounds of hydrogen and nitrogen into the melt at normal pressure. Feasibility experiments were carried out in Mo-wire resistance furnace at 1600℃. The copper content of about 400 g 45 steel were reduced from 0.60% and 0.57% to 0.41% and 0.51% with 3.25g and 1.20 g NH_4Cl respectively, while the copper contents of about 300 g steel melt were reduced from 1.15% and 0.61% to 0.90% and 0.56% with 4.10 g and 2.00 g NH_2CONH_2. These results indicate that the proposed method is very promising to be put into practical and worthwhile of further study.

A pyrazine based metal-organic framework for selective removal of copper from strongly acidic solutions

The selective capture of copper from strongly acidic solutions is of vital importance from the perspective of sustainable development and environmental protection.Metal organic frameworks(MOFs)have attracted the interest of many scholars for adsorption due to their fascinating physicochemical characteristics,including adjustable structure,strong stability and porosity.Herein,pz-UiO-66 containing a pyrazine structure is successfully synthesized for the efficient separation of copper from strongly acidic conditions.Selective copper removal at low pH values is accomplished by using this material that is not available in previously reported metal–organic frameworks.Furthermore,the material exhibits excellent adsorption capacity,with a theoretical maximum copper uptake of 247 mg/g.As proven by XPS and FT-IR analysis,the coordination of pyrazine nitrogen atoms with copper ions is the dominant adsorption mechanism of copper by pz-UiO-66.This work provides an opportunity for efficient and selective copper removal under strongly acidic conditions,and promises extensive application prospects for the removal of copper in the treatment for acid metallurgical wastewater.

镍精矿除铜的单纯形优化

本文简要叙述了单纯形优化的基本思想与寻优步骤。应用单纯形法对镍精矿—阳极泥—镍电解阳极液反应体系的深度除铜条件进行了寻优试验,其结果与前人的试验及工业实践基本相同,表明单纯形优化方法是确定多变量湿法冶金体系中某些重要因素的一种快速而简单的方法。

Removal of copper by modified chitosan adsorptive membrane

In this study,a novel adsorptive membrane was prepared from chitosan as the functional polymer and some additive blend solutions by solution casting method.The modified chitosan membrane was characterized by FTIR and its Water Swelling Ratio(WSR).The adsorption of copper ions on the adsorptive membrane was investi-gated in batch experiments.The results obtained from the experiments indicated that the membrane had a good adsorption capacity for copper ions,the optimal ionic strength and pH were 0.1 and 5–6,respectively.Compared with the Langmuir isotherm model,the experimental data were found to be following the Freundlich model.

Insights into influence of aging processes on zero-valent iron modified biochar in copper(II) immobilization: from batch solution to pilot-scale investigation

The zero-valent iron modified biochar materials are widely employed for heavy metals immobilization.However,these materials would be inevitably aged by natural forces after entering into the environment,while there are seldom studies reported the aging effects of zero-valent iron modified biochar.In this work,the hydrogen peroxide and hydrochloric acid solution were applied to simulate aging conditions of zero-valent iron modified biochar.According to the results,the adsorption capacity of copper(II)contaminants on biochar,zero-valent iron modified biochar-1,and zero-valent iron modified biochar-2 after aging was decreased by 15.36%,22.65%and 23.26%,respectively.The surface interactions were assigned with chemisorption occurred on multi-molecular layers,which were proved by the pseudo-second-order and Langmuir models.After aging,the decreasing of capacity could be mainly attributed to the inhibition of ion-exchange and zero-valent iron oxidation.Moreover,the plant growth and soil leaching experiments also proved the effects of aging treatment,the zero-valent iron modified biochar reduced the inhibition of copper(II)bioavailability and increased the mobility of copper(II)after aging.All these results bridged the gaps between bio-adsorbents customization and their environmental behaviors during practical agro-industrial application.

Preparation of Dicarboxyl Cellulose Nanocrystals from Agricultural Wastes by Sequential Periodate-Chlorite Oxidation

Agricultural waste straw is the renewable resource with the highest annual yield in the world.In value-added applications of agricultural waste,dicarboxyl cellulose nanocrystals(DCCs)are prepared from rice,wheat,and corn straw by sequential periodate-chlorite oxidation.In this study,DCCs from rice,wheat,and corn straw were characterized by transmission electron microscopy(TEM),Fourier transform infrared spectrometer,X-ray diffractometer(XRD),and thermal gravimetric analysis(TGA).The carboxyl content of the DCCs was also investigated.XRD results show that the crystallinity index decreased after sequential periodate-chlorite oxidation;however,the cellulose I structure was maintained.TEM results show that rod-shaped DCCs with an average length and width of 287.0 nm and 9.9 nm,respectively,were successfully prepared by sequential periodate-chlorite oxidation.The carboxyl content of the DCCs was around 3.9 mmol/g,and not affected by the type of straw.Experiments to study the removal of copper ions in aqueous medium were performed with the prepared DCCs.The adsorption capacities of copper ions were 131,162,and 144 mg/g for DCCs prepared from rice,wheat,and corn straws,respectively.The results show that DCCs prepared from rice,wheat,and corn straws by sequential periodatechlorite oxidation have potential for the removal of copper ions from aqueous medium.