Both M_(W) 7.8 and M_(W) 7.5 earthquakes occurred in southeastern Türkiye on February 6,2023,resulting in numerous buildings collapsing and serious casualties.Understanding the distribution of coseismic surface r...Both M_(W) 7.8 and M_(W) 7.5 earthquakes occurred in southeastern Türkiye on February 6,2023,resulting in numerous buildings collapsing and serious casualties.Understanding the distribution of coseismic surface ruptures and secondary disasters surrounding the epicentral area is important for post-earthquake emergency and disaster assessments.High-resolution Maxar and GF-2 satellite data were used after the events to extract the location of the rupture surrounding the first epicentral area.The results show that the length of the interpreted surface rupture zone(part of)is approximately 75 km,with a coseismic sinistral dislocation of 2-3 m near the epicenter;however,this reduced to zero at the tip of the southwest section of the East Anatolia Fault Zone.Moreover,dense soil liquefaction pits were triggered along the rupture trace.These events are in the western region of the Eurasian Seismic Belt and result from the subduction and collision of the Arabian and African Plates toward the Eurasian Plate.The western region of the Chinese mainland and its adjacent areas are in the eastern section of the Eurasian Seismic Belt,where seismic activity is controlled by the collision of the Indian and Eurasian Plates.Both China and Türkiye have independent tectonic histories.展开更多
At 02:04 on May 22,2021,an M_(S)7.4 earthquake occurred in Madoi County in Qinghai Province,China.This earthquake is the largest seismic event in China since the 2008M_(S) 8.0 Wenchuan earthquake.Thus,it is critical t...At 02:04 on May 22,2021,an M_(S)7.4 earthquake occurred in Madoi County in Qinghai Province,China.This earthquake is the largest seismic event in China since the 2008M_(S) 8.0 Wenchuan earthquake.Thus,it is critical to investigate surface deformation and damage in time to accurately understand the seismogenic structure of the Madoi earthquake and the seismogenic capacity of the blocks in this region.This study focuses on the Xuema Village,located at the eastern end of the coseismic surface ruptures produced by the event,and assesses the deformation and seismic damage in this area based on field surveys,UAV photogrammetry,and ground penetrating radar(GPR).The results indicate that the rupture scale is substantially smaller at the eastern end of the rupture zone compared to other segments.En echelon type shear tensile fractures are concentrated in a width range of 50–100 m,and the width of single fractures ranges from 20 to 30 cm.In contrast,the degree of seismic damage significantly increases at this site.All of the brick and timber houses are damaged or collapsed,while the steel frame structures and the color steel houses are slightly damaged.More than 80%of the bridge decks on the Changma River Bridge collapse,similar to the terraces along the Youerqu and Changma Rivers and the cut slopes of Provincial Highway S205.We infer that the seismogenic fault of the Madoi earthquake exerts a tail effect in this segment.The tension zone has led to a reduction at the eastern end of the rupture zone,causing shaking damage.Local topography and buildings without earthquake-resistant construction along the strike of the rupture zone have undergone different levels of seismic damage.展开更多
Objective Nowadays, high-resolution remote sensing technology has brought new changes to surveys of earthquakes, and the quantitative study of seismic faults based on this technology has become a trend in the world(Ba...Objective Nowadays, high-resolution remote sensing technology has brought new changes to surveys of earthquakes, and the quantitative study of seismic faults based on this technology has become a trend in the world(Barzegari et al., 2017). An Mw 7.2 earthquake occurred in Yutian of Xinjiang on the western end of the Altyn Tagh fault on March 21 st, 2008. It is difficult to access this depopulated zone because of the high altitude and only 1–2 months of snowmelt. This study utilized high-resolution展开更多
Large-scale detailed mapping plays a key role in revealing the rupture characteristics and mechanisms of strong earthquakes.Relatively few studies have been performed on the surface ruptures of large earthquakes in ce...Large-scale detailed mapping plays a key role in revealing the rupture characteristics and mechanisms of strong earthquakes.Relatively few studies have been performed on the surface ruptures of large earthquakes in central and western Tibet due to its remote nature and high elevation.Based on high-resolution unmanned aerial vehicle(UAV)photography,we mapped the coseismic surface rupture of the 2014 Yutian M_s7.3 earthquake.Along the western Altyn Tagh fault system,the earthquake produced~37 km of surface rupture along the South Xor Kol fault(southern section S1),Xor Kol fault(central section S2)and Ashikule fault(northern section S3).Section S1 has a 16-km-long surface rupture with an average sinistral offset of 52±25 cm and a maximum offset of~90 cm,while section S3 has a 14.2-km-long surface rupture with an average sinistral offset of 36±21 cm and a maximum offset of~84 cm.A compilation of 5308 cracks yields an average crack width along the southern section of 85±71 cm and a maximum width of~700 cm;the average width along the central section is 39±21 cm,and the maximum width is 243 cm;and the average width along the northern section is 61±44 cm with a maximum of~340 cm.In addition,the average cumulative opening across rupture zone is 3.4±2.9 m along the southern section,with a maximum of~17 m;4.3±3.6 m along the central section,with a maximum of~13 m;and 1.7±1.6 m along the northern section,with a maximum of~6 m.Evidently,the average crack width and cumulative opening decrease towards bends and steps along the fault.A global synthesis of surface rupture distributions corresponding to strike-slip earthquakes indicates that the rupture zone is wider near the complex parts of fault geometries(such as bends,steps and fault bifurcations)than along straight sections,suggesting that the fault geometry has an obvious control on the surface rupture width.The widespread cracks at the intersection between the Xor Kol and South Xor Kol faults may indicate that an extensional regime is more likely to produce distributed offfault deformation,which provides an observational constraint for the numerical simulation of dynamic rupture on a fault.In addition to coseismic surface rupture,the Yutian earthquake also produced a large number of gravity-driven slides on alluvial fans with gentle slopes.The friction efficiency of the water-bearing salt layer beneath fans could decrease the sliding threshold and trigger instability under surface shaking.These distributed deformations and gravity-driven slides reflect the coupling between the rupture propagation and fault geometry and indicate that the rupture may have propagated in two directions along the Ashikule fault after passing through a step.Therefore,the investigation of coseismic surface rupture provides important observational constraints on the dynamic rupture process.展开更多
基金funded by the Basic Research Program of the Institute of Earthquake Forecasting,China Earthquake Administration(Grant Nos.CEAIEF20220102,2021IEF0505,and CEAIEF2022050502)the National Natural Science Foundation of China(Grant Nos.42072248 and 42041006)the National Key Research and Development Program of China(Grant Nos.2021YFC3000601-3 and 2019YFE0108900)。
文摘Both M_(W) 7.8 and M_(W) 7.5 earthquakes occurred in southeastern Türkiye on February 6,2023,resulting in numerous buildings collapsing and serious casualties.Understanding the distribution of coseismic surface ruptures and secondary disasters surrounding the epicentral area is important for post-earthquake emergency and disaster assessments.High-resolution Maxar and GF-2 satellite data were used after the events to extract the location of the rupture surrounding the first epicentral area.The results show that the length of the interpreted surface rupture zone(part of)is approximately 75 km,with a coseismic sinistral dislocation of 2-3 m near the epicenter;however,this reduced to zero at the tip of the southwest section of the East Anatolia Fault Zone.Moreover,dense soil liquefaction pits were triggered along the rupture trace.These events are in the western region of the Eurasian Seismic Belt and result from the subduction and collision of the Arabian and African Plates toward the Eurasian Plate.The western region of the Chinese mainland and its adjacent areas are in the eastern section of the Eurasian Seismic Belt,where seismic activity is controlled by the collision of the Indian and Eurasian Plates.Both China and Türkiye have independent tectonic histories.
基金This research was supported by the National Natural Science Foundation of China(42072248,42041006)the National Key Research and Development Program(2021YFC3000601-3,2019YFE0108900)Scientific Research Project of China Datang Corporation Ltd.(DTXZ-02-2021).
文摘At 02:04 on May 22,2021,an M_(S)7.4 earthquake occurred in Madoi County in Qinghai Province,China.This earthquake is the largest seismic event in China since the 2008M_(S) 8.0 Wenchuan earthquake.Thus,it is critical to investigate surface deformation and damage in time to accurately understand the seismogenic structure of the Madoi earthquake and the seismogenic capacity of the blocks in this region.This study focuses on the Xuema Village,located at the eastern end of the coseismic surface ruptures produced by the event,and assesses the deformation and seismic damage in this area based on field surveys,UAV photogrammetry,and ground penetrating radar(GPR).The results indicate that the rupture scale is substantially smaller at the eastern end of the rupture zone compared to other segments.En echelon type shear tensile fractures are concentrated in a width range of 50–100 m,and the width of single fractures ranges from 20 to 30 cm.In contrast,the degree of seismic damage significantly increases at this site.All of the brick and timber houses are damaged or collapsed,while the steel frame structures and the color steel houses are slightly damaged.More than 80%of the bridge decks on the Changma River Bridge collapse,similar to the terraces along the Youerqu and Changma Rivers and the cut slopes of Provincial Highway S205.We infer that the seismogenic fault of the Madoi earthquake exerts a tail effect in this segment.The tension zone has led to a reduction at the eastern end of the rupture zone,causing shaking damage.Local topography and buildings without earthquake-resistant construction along the strike of the rupture zone have undergone different levels of seismic damage.
基金supported by the National Natural Science Foundation of China (grants No. 41461164002 and 41631073)
文摘Objective Nowadays, high-resolution remote sensing technology has brought new changes to surveys of earthquakes, and the quantitative study of seismic faults based on this technology has become a trend in the world(Barzegari et al., 2017). An Mw 7.2 earthquake occurred in Yutian of Xinjiang on the western end of the Altyn Tagh fault on March 21 st, 2008. It is difficult to access this depopulated zone because of the high altitude and only 1–2 months of snowmelt. This study utilized high-resolution
基金supported by the National Natural Science Foundation of China(Grant Nos.41902216,U1839203)Central Public-Interest Scientific Institution Basal Research Fund(Grant Nos.IGCEA1814,IGCEA1812)。
文摘Large-scale detailed mapping plays a key role in revealing the rupture characteristics and mechanisms of strong earthquakes.Relatively few studies have been performed on the surface ruptures of large earthquakes in central and western Tibet due to its remote nature and high elevation.Based on high-resolution unmanned aerial vehicle(UAV)photography,we mapped the coseismic surface rupture of the 2014 Yutian M_s7.3 earthquake.Along the western Altyn Tagh fault system,the earthquake produced~37 km of surface rupture along the South Xor Kol fault(southern section S1),Xor Kol fault(central section S2)and Ashikule fault(northern section S3).Section S1 has a 16-km-long surface rupture with an average sinistral offset of 52±25 cm and a maximum offset of~90 cm,while section S3 has a 14.2-km-long surface rupture with an average sinistral offset of 36±21 cm and a maximum offset of~84 cm.A compilation of 5308 cracks yields an average crack width along the southern section of 85±71 cm and a maximum width of~700 cm;the average width along the central section is 39±21 cm,and the maximum width is 243 cm;and the average width along the northern section is 61±44 cm with a maximum of~340 cm.In addition,the average cumulative opening across rupture zone is 3.4±2.9 m along the southern section,with a maximum of~17 m;4.3±3.6 m along the central section,with a maximum of~13 m;and 1.7±1.6 m along the northern section,with a maximum of~6 m.Evidently,the average crack width and cumulative opening decrease towards bends and steps along the fault.A global synthesis of surface rupture distributions corresponding to strike-slip earthquakes indicates that the rupture zone is wider near the complex parts of fault geometries(such as bends,steps and fault bifurcations)than along straight sections,suggesting that the fault geometry has an obvious control on the surface rupture width.The widespread cracks at the intersection between the Xor Kol and South Xor Kol faults may indicate that an extensional regime is more likely to produce distributed offfault deformation,which provides an observational constraint for the numerical simulation of dynamic rupture on a fault.In addition to coseismic surface rupture,the Yutian earthquake also produced a large number of gravity-driven slides on alluvial fans with gentle slopes.The friction efficiency of the water-bearing salt layer beneath fans could decrease the sliding threshold and trigger instability under surface shaking.These distributed deformations and gravity-driven slides reflect the coupling between the rupture propagation and fault geometry and indicate that the rupture may have propagated in two directions along the Ashikule fault after passing through a step.Therefore,the investigation of coseismic surface rupture provides important observational constraints on the dynamic rupture process.