Influence of water coupling coefficient on the blasting effect of red sandstone specimens

This study investigates the impact of different water coupling coefficients on the blasting effect of red sandstone.The analysis is based on the theories of detonation wave and elastic wave,focusing on the variation in wall pressure of the blasting holes.Using DDNP explosive as the explosive load,blasting tests were conducted on red sandstone specimens with four different water coupling coefficients:1.20,1.33,1.50,and 2.00.The study examines the morphologies of the rock specimens after blasting under these different water coupling coefficients.Additionally,the fractal dimensions of the surface cracks resulting from the blasting were calculated to provide a quantitative evaluation of the extent of rock damage.CT scanning and 3D reconstruction were performed on the post-blasting specimens to visually depict the extent of damage and fractures within the rock.Additionally,the volume fractal dimension and damage degree of the post-blasting specimens are calculated.The findings are then combined with numerical simulation to facilitate auxiliary analysis.The results demonstrate that an increase in the water coupling coefficient leads to a reduction in the peak pressure on the hole wall and the crushing zone,enabling more of the explosion energy to be utilized for crack propagation following the explosion.The specimens exhibited distinct failure patterns,resulting in corresponding changes in fractal dimensions.The simulated pore wall pressure–time curve validated the derived theoretical results,whereas the stress cloud map and explosion energy-time curve demonstrated the buffering effect of the water medium.As the water coupling coefficient increases,the buffering effect of the water medium becomes increasingly prominent.

Nondegenerate solitons of the(2+1)-dimensional coupled nonlinear Schrodinger equations with variable coefficients in nonlinear optical fibers

We derive the multi-hump nondegenerate solitons for the(2+1)-dimensional coupled nonlinear Schrodinger equations with propagation distance dependent diffraction,nonlinearity and gain(loss)using the developing Hirota bilinear method,and analyze the dynamical behaviors of these nondegenerate solitons.The results show that the shapes of the nondegenerate solitons are controllable by selecting different wave numbers,varying diffraction and nonlinearity parameters.In addition,when all the variable coefficients are chosen to be constant,the solutions obtained in this study reduce to the shape-preserving nondegenerate solitons.Finally,it is found that the nondegenerate two-soliton solutions can be bounded to form a double-hump two-soliton molecule after making the velocity of one double-hump soliton resonate with that of the other one.

A Coupled Variable Coefficient Modified KdV Equation Arising from a Two-Layer Fluid System

A quite general coupled variable coefficient modified KdV (VCmKdV) equation in a two-layer fluid systemis derived by means of the reductive perturbation method.Making use of the CK's direct method,some similarityreductions of the coupled VCmKdV equation are obtained and their corresponding group explanations are discussed.Some exact solutions of the coupled equations are also presented.

EXPLICIT SOLUTIONS TO THE COUPLED KdV EQUATIONS WITH VARIABLE COEFFICIENTS

By means of sn-function expansion method and cn-function expansion method, several kinds of explicit solutions to the coupled KdV equations with variable coefficients are obtained, which include three sets of periodic wave-like solutions. These solutions degenerate to solitary wave-like solutions at a certain limit. Some new solutions are presented.

Lax pair and vector semi-rational nonautonomous rogue waves for a coupled time-dependent coefficient fourth-order nonlinear Schrodinger system in an inhomogeneous optical fiber

Optical fibers are seen in the optical sensing and optical fiber communication. Simultaneous propagation of optical pulses in an inhomogeneous optical fiber is described by a coupled time-dependent coefficient fourth-order nonlinear Schr?dinger system, which is discussed in this paper. For such a system, we work out the Lax pair, Darboux transformation, and corresponding vector semi-rational nonautonomous rogue wave solutions. When the group velocity dispersion(GVD) and fourth-order dispersion(FOD) coefficients are the constants, we exhibit the first-and second-order vector semirational rogue waves which are composed of the four-petalled rogue waves and eye-shaped breathers. Both the width of the rogue wave along the time axis and temporal separation between the adjacent peaks of the breather decrease with the GVD coefficient or FOD coefficient. With the GVD and FOD coefficients as the linear, cosine, and exponential functions, we respectively present the first-and second-order periodic vector semi-rational rogue waves, first-and second-order asymmetry vector semi-rational rogue waves, and interactions between the eye-shaped breathers and the composite rogue waves.

The BTFR and MOND with Redshifts of Graviton Energy

This report is about the graviton redshift theory (GRST) which hypothesises the redshift of the energy of gravitons traveling in fields. A new source of energy loss in galaxy dynamics is introduced. Due to the hypothetical interactions of gravitons with the expansion of the universe, which causes an energy loss of the gravitons due to cosmological redshift, the rotation equation for galaxies, which previously had the Newtonian potential energy and the graviton gravitational redshift energy loss, is now updated with the graviton cosmological redshift energy loss. From the galaxy rotation equation, the baryonic Tully-Fisher relation (BTFR) and the modified Newtonian dynamics (MOND) are defined in radial distribution form. Fits to galaxy rotation motion are detailed. A cosmic connection for the BTFR is defined. The result is that galaxy rotation curves are fully accounted for with the GRST rotation equation and the BTFR and MOND theories are incorporated into a unified framework.

Principle of Cross Coupling Between Vertical Heat Turbulent Transport and Vertical Velocity and Determination of Cross Coupling Coefficient

It has been proved that there exists a cross coupling between vertical heat turbulent transport and vertical velocity by using linear thermodynamics. This result asserts that the vertical component of heat turbulent transport flux is composed of both the transport of the vertical potential temperature gradient and the coupling transport of the vertical velocity. In this paper, the coupling effect of vertical velocity on vertical heat turbulent transportation is validated by using observed data from the atmospheric boundary layer to determine cross coupling coefficients, and a series of significant properties of turbulent transportation are opened out. These properties indicate that the cross coupling coefficient is a logarithm function of the dimensionless vertical velocity and dimensionless height, and is not only related to the friction velocity u., but also to the coupling roughness height zwo and the coupling temperature Two of the vertical velocity. In addition, the function relations suggest that only when the vertical velocity magnitude conforms to the limitation IW/u. I # 1, and is above the level zwo, then the vertical velocity leads to the cross coupling effect on the vertical heat turbulent transport flux. The cross coupling theory and experimental results provide a challenge to the traditional turbulent K closure theory and the Monin-Obukhov similarity theory.

Mode stability analysis in the beam-wave interaction process for a three-gap Hughes-type coupled cavity chain

Based on space-charge wave theory, the formulae of the beam-wave coupling coefficient and the beam-loaded conductance are given for the beam-wave interaction in an N-gap Hughes-type coupled cavity chain. The ratio of the nonbeam-loaded quality factor of the coupled cavity chain to the beam quality factor is used to determine the stability of the beam-wave interaction. As an example, the stabilities of the beam-wave interaction in a three-gap Hughes-type coupled cavity chain are discussed with the formulae and the CST code for the operations of the 2π, π, and π/2 modes, respectively. The results show that stable operation of the 2π, π, and π/2 modes may all be realized in an extended-interaction klystron with the three-gap Hughes-type coupled cavity chain.

Impact coefficient and reliability of mid-span continuous beam bridge under action of extra heavy vehicle with low speed

To analyze the dynamic response and reliability of a continuous beam bridge under the action of an extra heavy vehicle, a vehicle–bridge coupled vibration model was established based on the virtual work principle and vehicle–bridge displacement compatibility equation, which can accurately simulate the dynamic characteristics of the vehicle and bridge. Results show that deck roughness has an important function in the effect of the vehicle on the bridge. When an extra heavy vehicle passes through the continuous beam bridge at a low speed of 5 km/h, the impact coefficient reaches a high value, which should not be disregarded in bridge safety assessments. Considering that no specific law exists between the impact coefficient and vehicle speed, vehicle speed should not be unduly limited and deck roughness repairing should be paid considerable attention. Deck roughness has a significant influence on the reliability index, which decreases as deck roughness increases. For the continuous beam bridge in this work, the reliability index of each control section is greater than the minimum reliability index. No reinforcement measures are required for over-sized transport.

Estimation of Mutual Coupling Coefficient of the Array by Simulated Annealing Algorithm

We propose a method for estimating the mutual coupling coefficient among antennas in this paper which is based on the principle of signal subspace and the simulated annealing （SA） algorithm. The computer simulation has been conducted to illustrate the＇ excellent performance of this method and to demonstrate that it is statistically efficient. The benefit of this new method is that calibration signals and unknown signals can be received simultaneously, during the course of calibration.

Calculation of the Coupling Coefficient of Twin-Core Fiber Based on the Supermode Theory with Finite Element Method

Currently, coupled mode theory (CMT) is widely used for calculating the coupling coefficient of twin-core fibers (TCFs) that are used in a broad range of important applications. This approach is highly accurate for scenarios with weak coupling between the cores but shows significant errors in the strong coupling scenarios, necessitating the use of a more accurate method for coupling coefficient calculations. Therefore, in this work, we calculate the coupling coefficients of TCFs using the supermode theory with finite element method (FEM) that has higher accuracy than CMT, particularly for the strong coupling TCF. To investigate the origin of the differences between the results obtained by these two methods, the modal field distributions of the supermodes of TCF are simulated and analyzed in detail.

Synchronization of N different coupled chaotic systems with ring and chain connections

Synchronization of N different coupled chaotic systems with ring and chain connections is investigated. The New system, the Chen system, the Lii system, the Lorenz system, and the Rossler system are used as examples in verifying effectiveness of the method. Based on the Lyapunov stability theory, the form of the controller is designed and the area of the coupling coefficients is determined. Simulations indicate that global synchronization of the N different chaotic systems can be realized by choosing appropriate coupling coefficients by using the controller.

The influences of environmental factors on the air-sea coupling coefficient

The response relationship between equivalent neutral wind speed anomaly(ENWSA)and sea-air temperature difference anomaly(SATDA)has been analyzed over four typical sea regions,i.e.,the Kuroshio Extension,the Gulf Stream,the Brazil-Malvinas Confluence and the Agulhas Return Current.The results show that ENWSA is more sensitive to SATDA than sea surface temperature anomaly(SSTA),which implies that SATDA seems to be a more suitable parameter than SSTA to analyze the mesoscale air-sea interactions.Here,the slope of the linear relation between ENWSA and SATDA is defined as the air-sea coupling coefficient.It is found that the values of the coupling coefficient over the four typical sea areas have obvious seasonal variations and geographical differences.In order to reveal the reason of the seasonal variation and geographical difference of the coupling coefficient,the influences of some environmental background factors,such as the spatially averaged sea surface temperature(SST),the spatially averaged air temperature,the spatially averaged sea-air temperature difference and the spatially averaged equivalent neutral wind speed,on the coupling coefficient are discussed in detail.The results reveal that the background sea-air temperature difference is an important environmental factor which directly affects the magnitude of the coupling coefficients,meanwhile,the seasonal and geographical variations of the coupling coefficient.

Coupling characteristics of laterally coupled gratings with slots

Laterally-coupled ridge-waveguide distributed feedback lasers fabricated without epitaxial regrowth steps have the advantages of process simplification and low cost.We present a laterally coupled grating with slots.The slots etched between the ridge and grating area are designed to suppress the lateral diffusion of carriers and to reduce the influence of the aspect-ratio-dependent-etching effect on the grating morphology in the etching process.Moreover,the grating height in this structure can be decreased to lower the aspect ratio significantly,which is advantageous over the conventional laterally coupled ridge waveguide gratings.The effects of five main structural parameters on the coupling characteristics of gratings are studied by MODE Solutions.It is found that varying the lateral width of the grating can be used as an effective way to tune the coupling strength;narrow slots(100 nm and 300 nm)and wide ridge(2μm–4μm)promote the stability of grating coupling coefficient and device performance.It is important to note that the grating bottom should be fabricated precisely.The comparative study of carrier distribution and mode field distribution shows that the introduction of narrow slots can strengthen the competitive advantage and stability of the fundamental mode.

On the Couplings between Chebyshev Coefficients as Derived from the Monthly Mean Geopotential Fields at 500 hPa over East Asia and the Southern Oscillation

The first six Chebyshev polynomial coefficients (i.e., A00, A01, A10, A11, A02, A20) were derived from monthly mean geopotential height over East Asia for the period 1951-1983. Spectral analysis of these coefficients reveals relative maxima of power in the frequency bands of 200 months (- 16.7 years), 25 months (the quasi-biennial oscillation), 5-6 months, and 2-3 months. Cross-spectral characteristics between Chebyshev coefficients and the Southern Oscillation Index (SOI) were also explored. Coherence spectrum for the zonal and meridional circulation index (A01 and A 10) with the SOI was significant near 4 years, the QBO, and 2-3 months. Some physical explanations were offered for the spatial linkages (i.e., teleconnections) between the SO and atmospheric circulation anomalies overEast Asia.

New Insights into the Action of Gravitons in Spiral Galaxies

New details of the action of gravitons in spiral galaxies are described. The effect of the graviton energy loss is hypothesized to be coupled to the baryon mass in the galaxy. From this relation, it follows that the baryonic Tully-Fisher relation is applicable to not just the final velocity of the galaxy but also to the rotational velocity at each radial position. In addition, a quadratic equation for the baryonic mass distribution is derived from the equation of motion. These results are demonstrated by making fits to galaxy rotation curves using a mass to light ratio model as well as the quadratic model for the mass distribution.

PROPAGATION OF SURFACE ACOUSTIC WAVES IN PRESTRESSED ANISOTROPIC LAYERED PIEZOELECTRIC STRUCTURES

The propagation of surface acoustic waves in layered piezoelectric structureswith initial stresses is investigated. The phase velocity equations are obtained for electricallyfree and shorted cases, respectively. Effects of the initial stresses on the phase velocity and theelectromechanical coupling coefficient for the fundamental mode of the layered piezoelectricstructures are discussed. Numerical results for the c-axis oriented film of LiNbO_3 on a sapphiresubstrate are given. It is found that the fractional change in phase velocity is a linear functionwith the initial stresses, and the electromechanical coupling factor increases with an increase ofthe absolute values of the compressive initial stresses. The results are useful for the design ofsurface acoustic wave devices.

Propagations of Rayleigh and Love waves in ZnO films/glass substrates analyzed by three-dimensional finite element method

Propagation characteristics of surface acoustic waves（SAWs） in ZnO films/glass substrates are theoretically investigated by the three-dimensional（3D） finite element method. At first, for（11ˉ20） ZnO films/glass substrates, the simulation results confirm that the Rayleigh waves along the [0001] direction and Love waves along the [1ˉ100] direction are successfully excited in the multilayered structures. Next, the crystal orientations of the ZnO films are rotated, and the influences of ZnO films with different crystal orientations on SAW characterizations, including the phase velocity, electromechanical coupling coefficient, and temperature coefficient of frequency, are investigated. The results show that at appropriate h/λ, Rayleigh wave has a maximum k^2 of 2.4% in（90°, 56.5°, 0°） ZnO film/glass substrate structure; Love wave has a maximum k^2 of 3.81% in（56°, 90°, 0°） ZnO film/glass substrate structure. Meantime, for Rayleigh wave and Love wave devices, zero temperature coefficient of frequency（TCF） can be achieved at appropriate ratio of film thickness to SAW wavelength. These results show that SAW devices with higher k^2 or lower TCF can be fabricated by flexibly selecting the crystal orientations of ZnO films on glass substrates.

Influence of air pressure on mechanical effect of laser plasma shock wave

The influence of air pressure on mechanical effect of laser plasma shock wave in a vacuum chamber produced by a Nd：YAG laser has been studied. The laser pulses with pulse width of 10ns and pulse energy of about 320mJ at 1.06μm wavelength is focused on the aluminium target mounted on a ballistic pendulum, and the air pressure in the chamber changes from 2.8 × 10^ 3 to 1.01 × 10^5pa. The experimental results show that the impulse coupling coefficient changes as the air pressure and the distance of the target from focus change. The mechanical effects of the plasma shock wave on the target are analysed at different distances from focus and the air pressure.

Stoney formula for piezoelectric film/elastic substrate system

With the trends in miniaturization, and particularly the introduction of micro- and nano-electro-mechanical system, piezoelectric materials used in microelectronic devices are deposited usually in the form of thin film on elastic substrates. In this work, the bending of a bilayer comprising a piezoelectric film deposited on an elastic substrate, due to the mismatch, is investigated. An analytic formula relating the curvature of the bilayer to the mismatch, the electroelastic constants and the film thickness is obtained, and from this formula, a transverse piezoelectric constant d31 can be estimated. Meanwhile the influence of electrornechanical coupling coefficient on the curvature is discussed.