A novel high-efficient P/N/Si-containing APP-based flame retardant with a silane coupling agent in its molecular structure for epoxy resin

A flame retardant containing multiple antiflaming elements usually exhibits high-efficient flame retardancy. Here, a novel P/N/Si-containing ammonium polyphosphate derivative(APTES-APP) is synthesized from ammonium polyphosphate(APP) and silane coupling agent(3-aminopropyl)triethoxysilane(APTES)via cation exchange, which is quite different in the chemical structure from APTES-modified APP for retaining silicon hydroxyls. APTES-APP is highly efficient for the epoxy resin. 8%(mass) APTES-APP imparts excellent flame retardancy to the epoxy resin, with a V-0 rating at the UL-94 test(1.6 mm)and an LOI value of 26%(vol). The peak heat release rate and total smoke production of the flameretardant epoxy resin are decreased by 68.1% and 31.3%, respectively. The synergy of P/N/Si contributes to the well-expanded char residue with a strong and dense surface layer, which is a very good barrier against heat and mass transfer. Besides, there is no significant deterioration in the mechanical properties of flame-retardant epoxy resin thanks to silicon hydroxyls forming hydrogen bonds with epoxy molecules. Meanwhile, other molecules can be grafted onto APTES-APP via these silicon hydroxyls, if needed.Briefly, this work has developed a new strategy for amino silane as flame retardants. In conjunction with a low-cost and simple preparation method, APTES-APP has a promising prospect in the high-performance flame-retardant epoxy.

Graft modification of ZnO nanoparticles with silane coupling agent KH570 in mixed solvent

The reaction of ZnO nanoparticles grafted with KH570 silane coupling agent was carried out in water-alcohol mixed solvent. Several characterization methods were applied to analyzing the results of surface modification such as Soxhlet extraction, Fourier transform infrared spectroscopy （FT-IR）, transmission electron microscopy （TEM）, thermogravimetry （TG）, differential scanning calorimetry （DSC） and zeta potential （ζ）. The results of FT-IR and TG-DSC show that the desired reaction chains have been covalently bonded on the surface of ZnO nanoparticles. Zetasizer results reveal that the maximal absolute value of ζ of the modified ZnO particles in acetone medium was 67.0 mV, which was much higher than that of the unmodified ZnO particles. So the surface of nanosized ZnO changed from hydrophilicity to hydrophobicity and the dispersity of ZnO nanoparticles were improved simultaneously. Finally, the mechanism of graft modification was discussed.

Influence of silane coupling agent on the conversion film forming of galvanized steel treated with cerium salt

The influence of silane coupling agent on the film forming of galvanized steel treated with cerium salt was studied by scanning electron microscopy （SEM） and X-ray photoelectron spectroscopy （XPS）, and the corrosion resistance of conversion films was analyzed by electro interstitial scanning （EIS）. The results show that silane coupling agent KH-570 has significant influence on the compactness and homogeneity of cerium conversion films, and the process of film forming is promoted by increasing the content of tervalent and tetravalent cerium oxide. The impedance value of the cerium conversion film, especially modified with KH-570, is greater than that of the base metal, which reveals that it is necessary to add silane coupling agent to the film-forming solution in order to improve the corrosion resistance of the conversion film.

Surface Modification of Fire-retardant Asphalt with Silane Coupling Agent

The theory and approach of the surface modified of asphalt fire-retardant with silane coupling agent were introduced. The optimum silane dosage was determined, and the structure and properties of the asphalt fire-retardant before and after the surface modification were characterized by infrared spectrum and thermo gravimetric analysis. The dispersion effect of asphalt flre-retardant was studied. The influence of the surface modification on the hydrophilicity and lipophilicity of the asphalt fire-retardant was analyzed. The experimental results showed that there were physical and chemical interactions between the silane coupling agent and the asphalt fire-retardant, which reduced the surface polarity of the asphalt fire retardant. The optimum silane coupling agent dosage was 0.95% of the asphalt fire retardant. The surface modification improved the thermal stability, dispersibility and lipophilicity of the asphalt fire retardant, which enhanced the compatibility between asphalt fire retardant and asphalt.

ON PHENYLSILANE TYPE COUPLING AGENTS AND THEIR APPLICATION IN COMPOSITE

In this paper, unsaturated polyester type GFRP composite was treated with phenylsilane type coupling agents by migration technology, then the mechanical properties were measured. The results show that the mechanical properties of GFRP composite are greatly improved but the other properties are little affected after being treated by phenylsilane type coupling agents (named as WGD type coupling agents).

Improvement of the FRP Sheet Bonded to Concrete Substrate by Silane Coupling Agent

We experimentally studied the fine lightweight aggregate with the particle size range of 3.15-4.75 mm used as functional bridge between FRP sheet and concrete substrate. However, problems would appear and how to deal with the interfacial transition zone（ITZ） and make it stronger is the key point for this concept. Considering that silane coupling agent（SCA） can provide a better bond on a silicon-containing material surface, it was introduced as a modifying material to further improve the bond quality of the ITZ between lightweight aggregate and cement paste. Results indicated that the water absorptivity of lightweight aggregate can be controlled by SCA solutions, and the pull-off bond strength, mechanical strength, and microhardness were increased, which was attributed to the optimized microstructure under the condition of an appropriate concentration of SCA.

Preliminary study of the effects of EVA coupling agents on properties of wood-plastic composites

As a hot-melt adhesive, ethylene-vinyl-acetate （EVA） has been used in many industrial applications. But studies of the application of EVA in wood-plastic composites （WPC） are relatively few, so we have investigated the proposition of whether EVA is a suitable coupling agent for WPC or not. The results show that EVA with 8% VA is not a suitable coupling agent, because it reduces the mechanical properties of WPC without any significant effect on its physical properties. With an increase in the amount of wood powder, the mechanical properties of WPC decrease and the ability of water absorption of WPC increases.

EFFECTS OF COUPLING AGENTS ON THE RHEOLOGICAL BEHAVIOR OF KAOLIN FILLED POLYAMIDE 6

An experimental study was carried out to investigate the effects of coupling agents on the rheological properties of kaolin filled polyamide 6(PA6). We have investigated the state of dispersion and interfacial interaction of the filled systems, using 'h:anning electron microscopy (SEM) and Molau test, respectively. It is found that the addition of the coupling agents to the PA6/ kaolin (20 wt percent) significantly decreases the melt viscosity and the melt elasticity (first normal stress difference). Moreover, the states of dispersion and the polymer/filler interactions have significant influences on the rheological properties of kaolin/PA6 systems. The rheological behavior of KH550 kaolin /PA6 system is different from that of KH560 kaolin/PA6 system, although chemical reactions have taken place between the surface of KH550 kaolin (or KH560 kaolin) and PA6 matrix during melt processing. This is attributable, in part, to the differences in the state of dispersion of kaolins in PA6 matrix and, to a great extent, to the differences in the extent of chemical reactions that have taken place between the filler and polymer matrix.

EFFECTS OF COUPLING AGENTS ON THE CRYSTALLIZATION BEHAVIOR OF PP/T-ZnOw COMPOSITES

The objectives of this paper are to understand the crystallization behavior of polypropylene （PP） composites with surface modified tetra-needle-shaped zinc oxide whisker （T-ZnOw）. T-ZnOw was surface modified with different coupling agents, such as silane coupling agents （KH-550, KH-560） and titanate coupling agent （NDZ-105）, in order to improve the compatibility between PP and T-ZnOw. DSC and POM were used to characterize the melt and crystallization behavior and the crystalline structures of the composites, respectively. The results show that the surface modified T-ZnOw acts as a nucleating agent of PP crystallization, depending on the coupling agent used for modification. KH-550 and KH-560 have more apparent role in improving the interfacial interaction than NDZ-105 and induce PP crystallization at higher temperature and with smaller spherulites size. The results also suggest that the crystallization behavior depends on not only the content of coupling agent, but also the content of the surface modified T-ZnOw used in the composites.

The Coupling Agents' Effects on the BSA Intercalated into Montmorillonite

The effects of surface modification on montmorillonite （MMT） were illustrated in order to produce the composite material with premium properties. MMT was treated with two coupling agents： glutaraldehyde （GA） and 7-methacryloxy-propyl-trimethoxy silane （KH570）. The effects of different coupling agents on MMT and protein interaction were investigated by XRD, FT-IR, TGA, UV-Vis, etc. The results of structure characterization indicated that KH570 modification could change the surface crystal structure of MMT. However, GA reacted with amino groups of Bovine serum albumin （BSA） and the ordered layer structures of MMT were not completely destroyed. Coupling agents could greatly increase the amounts of BSA intercalated and the effect of KH570 is better than that of GA. And, the optimum concentrations of KH570 and GA were 2% and 6%, respectively. The rate of weight loss increased by about 12% after MMT was pretreated with coupling agents. The possible reason is that coupling agent treatment makes the structure of MMT more accessible to protein absorption and helps to stabilize the protein structure. Moreover,the presence of coupling agents can reduce the direct chemical interaction between BSA and MMT, which results in increasing protein desorption.

The influence of silane coupling agent and poplar particles on the wettability, surface roughness, and hardness of UF-bonded wheat straw(Triticum aestivum L.)/poplar wood particleboard

We used silane coupling agents to improve the bonding ability between wheat straw particles and UF resin, and investigated surface properties （wettability and surface roughness） and hardness of parti-cleboard made from UF-bonded wheat straw （Triticum aestivum L.） combined with poplar wood as affected by silane coupling agent content and straw/poplar wood particle ratios. We manufactured one-layered particleboard panels at four different ratios of straw to poplar wood par-ticles （0%, 15%, 30% and 45% wheat straw） and silane coupling agent content at three levels of 0, 5% and 10%. Roughness measurements, average roughness （Ra）, mean peak-to-valley height （Rz）, and root mean square roughness （Rq） were measured on unsanded samples by using a fine stylus tracing technique. We obtained contact angle measurements by using a goniometer connected to a digital camera and computer sys-tem. Boards containing greater amounts of poplar particles had superior hardness compared to control samples and had lower wettability. Panels made with higher amounts of silane had lower Rq values.

Chemical Reaction Between Polyvinyl Alcohol and Titanate Coupling Agent with X-Ray Photoelectron Spectroscopy

The chemical reaction between polyvinyl alcohol (PVA) and tri(dioctylpyrophosphoryloxy) isopropyl titanate (NDZ-201) was studied using X-ray photoelectron spectroscopy (XPS).The results show that some C-OH functional groups of PVA react with the titanate coupling agent to form C PVA-O-Ti-O-C PVA bond.The cross-linking of the PVA chains occurs through the formation of C PVA-O-Ti-O-C PVA bonds and produces a three dimensional hydrophobic polymer network.Accordingly,the mechanism is proposed that the titanate coupling agent improves the moisture sensitivity of high alumina cement/polyvinyl alcohol (HAC/PVA) based macro defect free (MDF) composite material.

A STUDY OF THE STRUCTURAL LAYERS OF COUPLING AGENTS AND THE MICROSCOPIC RHEOLOGY IN THE INTERFACES OF GF/UP SYSTEMS

The coupling agents content and thickness on glass fiber (GF) surfaces which have been treated with silanes and titanates under different conditions are tested by means of XRF (X-Ray Fluorescent spectrometry). And the rheological characteristics of the dispersed systems prepared from the above glass fibers combined with unsaturated polyester resin (UP) are discussed. The results show that the rigidity of the internal layers of silane coupling agent absorbed by glass surfaces is greater than the one of the external layers; while the effect of the titanate coupling agents on the rheolo- gical characteristics of the system is approximately the same in each structural layer, that is due to the fact that both the internal and external layers of titanates on glass surfaces have the similar flexible structures.

Reparation and Performance Testing of Free Radical Photocurable Passivation Film Modified by Titanate Coupling Agent for Hot-plated Aluminum-zinc Steel Plate

To study the effect of free radical photocurable passivation film modified by titanate coupling agent for hot-plated aluminum-zinc plate,trimethylpropane triacrylate(TMPTA)and 2-phenoxyethyl acrylate were used as active diluents,a mixture of modified epoxy acrylate and modified polyester acrylate in a certain proportion was used as an oligomer,2-methyl-1-[4-(methylothyl)benzene]-2-morpholine acetone(907)was used as a free radical photoinitiator,isopropyl thioxanthone(ITX)was used as sensitizer,and bis(dioctyl phosphate acyl)titanate ethyltitanate acrylamide chelate(FD-812)was used as corrosion inhibitor modifier.After UV-curing,the passivation film was characterized by neutral salt spray test,electrochemical testing and other methods.The general performance of the passivation film may meet the requirements of downstream users of hot aluminum-zinc steel plate.The neutral salt spray test,electrochemical testing and microscopic surface morphology analysis of passivation film are in agreement.The introduction of titanate components may effectively promote the photocuring of free radicals.There have been few reports on the titanate coupling which is added to UV-curing coating formula.The titanate coupling agent contains acrylamide groups and terminal amine groups,acrylamide group has oligomer and crosslinking monomer,the terminal tertiary amine groups can provide hydrogen protons,reduce oxygen polymerization,and a phosphating film is formed on the surface of the metal substrate to improve the adhesion and corrosion resistance of the coating.

A NOVEL ZWITTERIONIC SILANE COUPLING AGENT FOR NONTHROMBOGENIC BIOMATERIALS

A novel silane coupling agent bearing sulfobetaine group, N,N-diethyl-N-（3-sulfopropyl）-aminopropyl- trimethoxysilane （DESATS）, was first designed, synthesized and characterized. Its solution property was studied by means of dynamic light scattering. DESATS was successfully bonded onto the surface of the glass and proved by ESCA. Platelet adhesion assay in vitro indicated that the nonthrombogenicity of glass slide modified with DESATS is greatly improved.

Covalent Attachment of DNA to Glass Supports Using A New Silane Coupling Agent and Chemiluminescent Detection

A new kind of silane coupling agent, N- (β-aminoethyl ) - γ-aminopropyl triet hoxysilane, was used for DNA direct attachment on the surfaces of glass supports, then the immobilized DNA was hybridized with horseradish peroxidase (HRP)-labeled probe, and detected by using enhanced chemiluminescent method. In comparison with γ-aminopropyl triethoxysilane, the detection limits (S/N) of DNA were 10 pg and 75 pg respectively. Several experimental conditions of DNA attachING to glass supports were investigated, and the system of hybridization of nucleic acid on the surfaces of glass supports was developed.

Understanding the Effect of Zinc Oxide(ZnO)With Carbon Black Coupling Agent on Physico-Mechanical Properties in Natural Rubber Matrix

Natural rubber(NR)is not only the main compounding ingredient used to make the majority of components of tires as well as other rubber products,as it plays a significant role in ensuring that they operate well and complies with environmental standards.The applications of NR products are lim-ited to high temperatures due to the revision tendency of NR vulcanizate.To address these issues,the potential engagement of a carbon black(CB)coupling agent(CA)in the presence of metal oxide i.e.Zinc Oxide(ZnO)was investigated in an NR-based system.This CA has dual functionality on physicomechanical properties.CA has the ability to reduce hysteresis loss as well as improve anti-reversion properties and these properties thorough-ly depend on the presence of ZnO.While ZnO was added to the master formulation,a 65%improvement in reversion properties was observed.On the other hand,while ZnO fully transferred to the final formulation,bound rubber(BR)content increased by 19%,the difference in storage modulus(ΔG’)is reduced by 22%,cure rate index(CRI)improved by 14%,loss tangent(tanδ)reduced by 18%and slightly improve in elongation at break compared to control compound.Thermo-gravimetric analysis(TGA)was engaged to understand the thermal stability and degree of purity of CA.A differential Scanning Calorimeter(DSC)was used to detect the phase tran-sition of CA.Fourier Transform Infrared Spectrum(FTIR)was adopted to detect the presence of carboxyl and amine groups in the CA moiety.Payne effect,BR content and Transmission Electron Microscope(TEM)were em-ployed to investigate the micro-level dispersion of CB in the natural rubber(NR)matrix.

Preparation and properties of silane coupling agent modified steel slag as functional filler for anti-corrosion coating

The chemical composition and high wear resistance of steel slag(SS)make it a potential alternative to traditional inorganic fillers.3-Aminopropyltriethoxysilane(KH550)modified steel slag(MSS)was successfully prepared,and its application in epoxy(EP)anti-corrosion coating was introduced.Due to the grafting of silane coupling agent functional groups onto the surface of SS,MSS exhibited improved solubility in xylene organic solvent and reduced agglomeration.When the MSS content was 15 wt.%,the contact angle of the MSS/EP composite coating was 101°,and the abrasion was only 0.07 g,compared with 56.2°and 0.13 g,respectively,for the pure EP coating.The corrosion resistance of coatings was investigated by performing the electrochemical test(impedance)after immersion in a 3.5 wt.%NaCl solution.The electrochemical test results showed that the impedance modulus of the 15 wt.%MSS/EP composite coating at low frequency(Z_(f)=0.01 Hz)was approximately 1.08×10^(7)Ωcm^(2),which was two orders of magnitude higher than that of the pure EP coating.

Nanolignin,a Coupling Bio-Agent for Wood-Plastic Composites

The influence of nanolignin coupling bio-agent on some characteristics of polypropylene-wood flour composites was studied.Thus,nanolignin was prepared by the acidic method,and then different ratios of it(0,1,3 and 5 wt%)were added to a polypropylene-wood flour mixture.After mechanically mixing wood flour,nanolignin,and polypropylene,the mixture was injection molded.ASTM methods were used to measure the structural properties of nanolignin,and prepared composites’water absorption,thickness swelling,bending modulus,and bending,tensile and impact strengths.Transforming the original lignin to nanolignin did not change the chemical bonds of the material.The addition of nanolignin yielded improved mechanical and physical properties of the composites prepared.Higher strength and dimensional stability are presented by nanolignin-containing composites when comparing them with those prepared with normal lignin.Nanolignin was shown by SEM(Scanning Electron Microscope)observation to be uniformly dispersed within the polymer matrix.Wood polymer composites(WPCs)with nanolignin exhibited comparable properties with the control samples prepared using maleic anhydride polypropylene(MAPP).

Interface Enhancement of Glass Fiber/Unsaturated Polyester Resin Composites with Nano-Silica Treated Using Silane Coupling Agent

Nano-silica treated with different kinds of coupling agent （KH550, A-143, A-151） was used to modify the surface condition of glass fiber, and then, the modified glass fiber/unsaturated polyester resin （UPR） composites materials were prepared. Scanning electron microscopy （SEM）, dynamic mechanical analysis （DMA）, and impact test were used to characterize the composite materials＇ structure and properties. The morphology of composite materials shows that the adhesion between nano-silica and glass fiber is improved when silane coupling agent is added in. The DMA and impact test results show that silane coupling agent （especially KH550 and A-151） could effectively improve the composite＇s mechanical properties. When the dose of KH550 was 0.1% （m ： m）, the storage modulus and impact strength reached the maximum.