Being abundant in hydropower, coal, wind energy and solar energy etc., Northwest China is an important energy base with great potential. In recent years, along with the vigorous development of the energy base,
The Kubelka-Munk revised theory was adopted to derive the mix design theory of high solar reflectance and high emissivity coatings.When the concentration of each colorant is within 20%,and the width of the coating is ...The Kubelka-Munk revised theory was adopted to derive the mix design theory of high solar reflectance and high emissivity coatings.When the concentration of each colorant is within 20%,and the width of the coating is more than 200 μm,each colorant has enough covering power in visible and near-infrared spectral range.It can be assumed that the addition of colorants in coatings can only change the solar spectral absorption ratio rather than solar spectral scattering coefficient.The spectral scattering coefficient of coatings tends to a constant.The spectral absorption-scattering property of each colorant can be characterized through one parameter.The spectral absorption-scattering coefficient of coatings can be calculated with the multivariate linear relationship of each pigment.Moreover,the results can be expanded for high solar reflectivity and high long-wave emissivity coating preparation.The accuracy of Kubelka-Munk revised theory has been tested and verified through comparison between the calculated value and tested value of coating reflectance.展开更多
Vibrational power flow on combined plates with a change in mass and stiffness or with viscoelastic damping layer used widely in engineering is studied. The expressions of flexural displacement and other physical quan...Vibrational power flow on combined plates with a change in mass and stiffness or with viscoelastic damping layer used widely in engineering is studied. The expressions of flexural displacement and other physical quantities are obtained using Laplace transformation and transfer matrix approach, then influences of changes in mass and stiffness of discontinuous material and the free damping layer on the input power flow and the transmitted power flow are discussed. The conclusions provide theory basis for structural optimization design and reducing noise and vibration展开更多
文摘Being abundant in hydropower, coal, wind energy and solar energy etc., Northwest China is an important energy base with great potential. In recent years, along with the vigorous development of the energy base,
基金Supported by the 12th Five-year National Science and Technology Support Plan(No.2011BAE27B04)the Natural Science Foundation of China(No.51378391)the China Scholarship Council(award to HE Yan for studying in the University of Toronto)
文摘The Kubelka-Munk revised theory was adopted to derive the mix design theory of high solar reflectance and high emissivity coatings.When the concentration of each colorant is within 20%,and the width of the coating is more than 200 μm,each colorant has enough covering power in visible and near-infrared spectral range.It can be assumed that the addition of colorants in coatings can only change the solar spectral absorption ratio rather than solar spectral scattering coefficient.The spectral scattering coefficient of coatings tends to a constant.The spectral absorption-scattering property of each colorant can be characterized through one parameter.The spectral absorption-scattering coefficient of coatings can be calculated with the multivariate linear relationship of each pigment.Moreover,the results can be expanded for high solar reflectivity and high long-wave emissivity coating preparation.The accuracy of Kubelka-Munk revised theory has been tested and verified through comparison between the calculated value and tested value of coating reflectance.
文摘Vibrational power flow on combined plates with a change in mass and stiffness or with viscoelastic damping layer used widely in engineering is studied. The expressions of flexural displacement and other physical quantities are obtained using Laplace transformation and transfer matrix approach, then influences of changes in mass and stiffness of discontinuous material and the free damping layer on the input power flow and the transmitted power flow are discussed. The conclusions provide theory basis for structural optimization design and reducing noise and vibration
