Development of a novel critical nitrogen concentration-cumulative transpiration curve for optimizing nitrogen management under varying irrigation conditions in winter wheat

Accurate nitrogen(N)nutrition diagnosis is essential for improving N use efficiency in crop production.The widely used critical N(Nc)dilution curve traditionally depends solely on agronomic variables,neglecting crop water status.With three-year field experiments with winter wheat,encompassing two irrigation levels(rainfed and irrigation at jointing and anthesis)and three N levels(0,180,and 270 kg ha1),this study aims to establish a novel approach for determining the Nc dilution curve based on crop cumulative transpiration(T),providing a comprehensive analysis of the interaction between N and water availability.The Nc curves derived from both crop dry matter(DM)and T demonstrated N concentration dilution under different conditions with different parameters.The equation Nc=6.43T0.24 established a consistent relationship across varying irrigation regimes.Independent test results indicated that the nitrogen nutrition index(NNI),calculated from this curve,effectively identifies and quantifies the two sources of N deficiency:insufficient N supply in the soil and insufficient soil water concentration leading to decreased N availability for root absorption.Additionally,the NNI calculated from the Nc-DM and Nc-T curves exhibited a strong negative correlation with accumulated N deficit(Nand)and a positive correlation with relative grain yield(RGY).The NNI derived from the Nc-T curve outperformed the NNI derived from the Nc-DM curve concerning its relationship with Nand and RGY,as indicated by larger R2 values and smaller AIC.The novel Nc curve based on T serves as an effective diagnostic tool for assessing winter wheat N status,predicting grain yield,and optimizing N fertilizer management across varying irrigation conditions.These findings would provide new insights and methods to improve the simulations of water-N interaction relationship in crop growth models.

The potential mechanism and clinical application value of remote ischemic conditioning in stroke

Some studies have confirmed the neuroprotective effect of remote ischemic conditioning against stroke. Although numerous animal researches have shown that the neuroprotective effect of remote ischemic conditioning may be related to neuroinflammation, cellular immunity, apoptosis, and autophagy, the exact underlying molecular mechanisms are unclear. This review summarizes the current status of different types of remote ischemic conditioning methods in animal and clinical studies and analyzes their commonalities and differences in neuroprotective mechanisms and signaling pathways. Remote ischemic conditioning has emerged as a potential therapeutic approach for improving stroke-induced brain injury owing to its simplicity, non-invasiveness, safety, and patient tolerability. Different forms of remote ischemic conditioning exhibit distinct intervention patterns, timing, and application range. Mechanistically, remote ischemic conditioning can exert neuroprotective effects by activating the Notch1/phosphatidylinositol 3-kinase/Akt signaling pathway, improving cerebral perfusion, suppressing neuroinflammation, inhibiting cell apoptosis, activating autophagy, and promoting neural regeneration. While remote ischemic conditioning has shown potential in improving stroke outcomes, its full clinical translation has not yet been achieved.

Tilting homeostatic and dyshomeostatic microglial balance in health and disease:transforming growth factor-beta1 as a critical protagonist

Adult microglia,by continuously sensing changes in their environment and communicating with nearly all brain cell types,are considered to be the immune sentinels of the brain.In the healthy central nervous system(CNS),microglia display a unique molecular homeostatic signature(i.e.,Tmem119,P2ry12,Sall1,Siglech,Gpr34,and Hexb)(Figure 1A).

Unlocking hypoglycemia–associated brain microvascular dysfunction:critical insights from proteomic analysis

Hypoglycemia-a critical complication linked to worsened brain function in diabetic subjects:Hypoglycemia is characterized by a decline in circulatory glucose levels below sta nda rd physiological thresholds.Mild hypoglycemia,classified as level 1 hypoglycemia,is defined by blood glucose levels below 70 mg/dL and can be effectively addressed through carbohydrate intake.Severe hypoglycemia,denoted by blood glucose levels less than 54 mg/dL,poses a life-threatening risk if left untreated.Individuals with type 1 and type 2 diabetes undergoing insulin treatment are particularly susceptible to hypoglycemia due to impaired counterregulatory mechanisms.

Deep eutectic solvents for separation and purification applications in critical metal metallurgy:Recent advances and perspectives

Solvent extraction,a separation and purification technology,is crucial in critical metal metallurgy.Organic solvents commonly used in solvent extraction exhibit disadvantages,such as high volatility,high toxicity,and flammability,causing a spectrum of hazards to human health and environmental safety.Neoteric solvents have been recognized as potential alternatives to these harmful organic solvents.In the past two decades,several neoteric solvents have been proposed,including ionic liquids(ILs)and deep eutectic solvents(DESs).DESs have gradually become the focus of green solvents owing to several advantages,namely,low toxicity,degradability,and low cost.In this critical review,their classification,formation mechanisms,preparation methods,characterization technologies,and special physicochemical properties based on the most recent advancements in research have been systematically described.Subsequently,the major separation and purification applications of DESs in critical metal metallurgy were comprehensively summarized.Finally,future opportunities and challenges of DESs were explored in the current research area.In conclusion,this review provides valuable insights for improving our overall understanding of DESs,and it holds important potential for expanding separation and purification applications in critical metal metallurgy.

Transient extreme insulin resistance in a critically ill patient:A case report

BACKGROUND Acute hyperglycemia due to insulin resistance is common in critically ill patients,typically managed with insulin infusion.However,the occurrence of transient extreme insulin resistance(EIR)requiring exceptional high-dose insulin is rare.CASE SUMMARY We present the case of a 68-year-old woman with pneumonia who suffered an out-of-hospital cardiac arrest,subsequently developing transient EIR following a new episode of sepsis.Remarkably,insulin resistance rapidly reversed when the insulin infusion rate peaked at 960 units/hour(a total of 18224 units on that day),and it was promptly titrated down to zero upon achieving the target glucose level.CONCLUSION Exceptional high-dose insulin infusion may be required in critically ill patients with stress-related EIR,which is typically transient.Clinicians should be aware of the phenomenon and cautious to avoid hypoglycemia and fluid overload during the steep titration of high-dose insulin infusion.

Forging an easier path through graduation:Improving the patient transition from paediatric to adult critical care

Adolescence and the journey to adulthood involves exciting opportunities as well as psychosocial stress for young people growing up.These normal experiences are potentially magnified for teenagers living with chronic illness or disability and their families.Advances in care have improved survival for children with a variety of serious chronic medical conditions such that many who may once have died in childhood now survive well into adulthood with ongoing morbidity.For those with highly complex needs,care is often provided at major paediatric hospitals with expertise,specially trained personnel,and resources to support young people and their families for the first decades of life.At the end of adolescence,however,it is generally appropriate and necessary for young adults and their caregivers to transition to the care of clinicians trained in the care of adults at general hospitals.While there are some well-managed models to support this journey of transition,these are often specific to certain conditions and usually do not involve intensive care.Many patients may encounter considerable challenges during this period.Difficulties may include the loss of established therapeutic relationships,a perception of austerity and reduced amenity in facilities oriented to caring for adult patients,and care by clinicians with less experience with more common paediatric conditions.In addition,there is a risk of potential conflict between clinicians and families regarding goals of care in the event of a critical illness when it occurs in a young adult with major disability and long-term health issues.These challenges present genuine opportunities to better understand the transition from paediatric to adult-based care and to improve processes that assist clinicians who support patients and families as they shift between healthcare settings.

Effect of dietary fibre on the gastrointestinal microbiota during critical illness:A scoping review

The systemic effects of gastrointestinal(GI)microbiota in health and during chronic diseases is increasingly recognised.Dietary strategies to modulate the GI microbiota during chronic diseases have demonstrated promise.While changes in dietary intake can rapidly change the GI microbiota,the impact of dietary changes during acute critical illness on the microbiota remain uncertain.Dietary fibre is metabolised by carbohydrate-active enzymes and,in health,can alter GI microbiota.The aim of this scoping review was to describe the effects of dietary fibre supplementation in health and disease states,specifically during critical illness.Randomised controlled trials and prospective cohort studies that include adults(>18 years age)and reported changes to GI microbiota as one of the study outcomes using non-culture methods,were identified.Studies show dietary fibres have an impact on faecal microbiota in health and disease.The fibre,inulin,has a marked and specific effect on increasing the abundance of faecal Bifidobacteria.Short chain fatty acids produced by Bifidobacteria have been shown to be beneficial in other patient populations.Very few trials have evaluated the effect of dietary fibre on the GI microbiota during critical illness.More research is necessary to establish optimal fibre type,doses,duration of intervention in critical illness.

Effects of charge size on explosives thermal initiation critical temperature under constrained conditions

In order to study the relationship between charge size and thermal initiation critical temperature of explosive in defined conditions,cook-off test about JH explosive was carried out at a heating rate of 1 ℃/min using self-designed cook-off experiment setup based on thermostatic control technology.Numerical simulation was conducted to study the effects of different charge sizes on thermal initiation critical temperature of explosives with FLUENT software.Experiment results show that there is a thermal initiation critical temperature in cook-off bomb.Simulation results show that when the ratio of the length to diameter of explosives grains is a fixed value,the thermal initiation critical temperature of explosives decreases with the increase of the diameter of explosives grains.When the grains diameter of explosives increase up to a certain value,the influence of charge size on thermal initiation critical temperature tends to be weakened.Charge size has no influence on the ignition point of explosives.The ignition point is always in the center of the grain.

Mechanism analysis on pillar instability induced by micro-disturbance under critical condition

A simplified mechanical model of ultra-high pillar was established and its potential energy expression was derived under axial load on the basis of energy theory. Under critical conditions according to the nonlinear theory, the critical behaviors and the forming mechanism of pillar instability were discussed by external disturbance , such as stresses waves by blasting , axial force eccentricity ratherish and imperfections in pillar. The results show that the micro-disturbances attenuate with time and they are independence each other when pillar is in the stability state. Their effects on the stability of system are inessential. The correlation degree of disturbances increases sharply and various micro-disturbances are relative and nested reciprocally when the system is in critical state and they also cooperate with each other, which induces system to reach a new state.

Critical condition study of borehole stability during air drilling

The purpose of this paper is to establish the existence of the critical condition of borehole stability during air drilling. Rock Failure Process Analysis Code 20 was used to set up a damage model of the borehole excavated in strain-softening rock. Damage evolution around the borehole was studied by tracking acoustic emission. The study indicates that excavation damaged zone （EDZ） is formed around borehole because of stress concentration after the borehole is excavated. There is a critical condition for borehole stability; the borehole will collapse when the critical damage condition is reached. The critical condition of underground excavation exists not only in elastic and ideal plastic material but in strainsoftening material as well. The research is helpful to developing an evaluation method of borehole stability during air drilling.

System design and analysis of the trans-critical carbon-dioxide automotive air-conditioning system

As an environmentally harmless and feasible alternate refrigerant, CO 2 has attracted worldwide attention, especially in the area of automobile air conditioning (AAC). The thermal property of CO 2 and its trans critical refrigeration cycle is very different from that of the traditional CFC or HCFC system. The detailed process of CO 2 system thermal cycle design and optimization is described in this paper. System prototype and performance test bench were developed to analyze the performance of the CO 2 AAC system.

Research on the Critical Conditions for Clay Particle Release During Saline Aquifer Freshening Process

Water sensitivity phenomenon occurs during saline aquifer freshening process in seawater intrusion area, and clay particles released in the phenomenon can damage the infiltration capacity of the aquifer. In order to find out the factors and mechanisms for clay particle release, laboratory column infiltration experiments simulating saline aquifer freshening process were designed to measure the critical conditions(critical flow velocity, critical salt concentration and critical ionic strength) and force analysis for clay particle according to DLVO electric double layer theory was employed to illustrate the mechanisms for particle release. The research results showed that critical flow velocity for clay particle release is influenced by salt concentration of injecting solution. When salt concentration of injecting solution is very high, clay particles are not released, indicating that there does not exist a critical flow velocity in this situation. As salt concentration of injecting solution decreases, particles start to be released. The critical salt concentration for clay particle release is 0.052 mol L-1 in our work, which was determined by a constant-flux experiment for stepwise displacement of high concentration Na Cl solution. The critical ionic strength for clay particle release decreases as Ca2+ molar content percentage of the mixed solution of Na Cl and Ca Cl2 increases following the first-order exponential decay equation y = 0.0391e-0.266 x + 0.0015.

Debris Flow Formation Process and Critical Hydrodynamic Conditions in the Meizoseismal Area of the Wenchuan Earthquake

Abstract： The Wenchuan earthquake generated strong surface disturbances and triggered a large number of loose deposits, resulting in the disaster- prone environment with special watershed hydrological characteristics. This paper was to propose a debris flow formation process and explore the permeability characteristics and critical hydrodynamic conditions of the loose deposits triggered by the earthquake. The Guo Juanyan gully （31005＇27＂ N to 31005＇46＂ N, 103036＇58＂ E to 103037＇09＂ E） in Du Jiangyan City, located in the meizoseismal areas of the Wenchuan earthquake, was chosen as the study area and the disaster-prone environment was analyzed. The formation process of the debris flow was first proposed using a stability analysis, and then, the permeability characteristics of loose deposits were determined via in situ permeability experiments. Finally, the critical 1 h rainfall was simulated through a distributed hydrological model and verified by field observations. The formation process of debris flow could be divided into three stages based on the relationship between the hydrodynamic force and loose deposit resistance. The critical 1 h rainfall amounts under three antecedent moisture conditions （I-dry, Ⅱ-normal and Ⅲ-wet） were 52 mm/h, 43 mm/h and 34 mm/h, respectively. This study proposed a debris flow formation process in the meizoseismal areas of the Wenchuan earthquake based on the stability analysis and defined the rainfall threshold for debris flow early warning at the local level, which is significant for debris flow mitigation and risk management.

POSITIVE SOLUTIONS FOR CRITICAL QUASILINEAR ELLIPTIC EQUATIONS WITH MIXED DIRICHLET-NEUMANN BOUNDARY CONDITIONS

The existence and multiplicity of positive solutions are studied for a class of quasi- linear elliptic equations involving Sobolev critical exponents with mixed Dirichlet-Neumann boundary conditions by the variational methods and some analytical techniques.

Study on critical conditions for rock failure by means of group renormalization

A study of the characteristics of the accumulative rock failure and its evolution byapplication of the group renormalization method were presented. In addition, the interactionand long-range correlated effects between the immediate neighboring units was studied.The concept of mechanical transference for model OFC, employed in the study ofself-organized criticality, and the coefficient a were introduced into the calculation model forgroup renormalization. With the introduction, mechanisms for the drastic increase and decrease of failure intensity of rocks were investigated under similar macro-conditions.

Simulation of critical cooling rate and process conditions for metallic glasses in vertical type twin-roll casting

Critical cooling rates for producing metallic glasses were evaluated based on a calculated continuous cooling transformation(CCT)diagram.Temperature distributions of the melt in molten pool in the vertical type twin-roll casting(VTRC)process of metallic glasses were simulated,and cooling rates under different casting conditions were calculated with the simulated results.By comparing the results obtained by CCT diagrams and simulation,the possibility of producing metallic glasses by the VTRC method and influences of casting conditions on cooling rate were discussed.The results reveal that cooling rate with3or4orders of magnitude by the VTRC process can be attained in producing Mg-based metallic glasses,which is faster than the critical cooling rate calculated by the CCT diagram.One side pouring mode can improve the temperature distributions of casting pool.VTRC process has a good ability in continuous casting metallic glassy thin strips.

Critical deflagration waves leading to detonation onset under different boundary conditions

High-speed turbulent critical deflagration waves before detonation onset in H2–air mixture propagated into a square cross section channel, which was assembled of optional rigid rough, rigid smooth, or flexible walls. The corresponding propagation characteristic and the influence of the wall boundaries on the propagation were investigated via high-speed shadowgraph and a high-frequency pressure sampling system. As a comprehensive supplement to the different walls effect investigation, the effect of porous absorbing walls on the detonation propagation was also investigated via smoke foils and the high-frequency pressure sampling system. Results are as follows. In the critical deflagration stage, the leading shock and the closely following turbulent flame front travel at a speed of nearly half the CJ detonation velocity. In the preheated zone, a zonary flame arises from the overlapping part of the boundary layer and the pressure waves, and then merges into the mainstream flame. Among these wall boundary conditions, the rigid rough wall plays a most positive role in the formation of the zonary flame and thus accelerates the transition of the deflagration to detonation（DDT）, which is due to the boost of the boundary layer growth and the pressure wave reflection. Even though the flexible wall is not conducive to the pressure wave reflection, it brings out a faster boundary layer growth, which plays a more significant role in the zonary flame formation. Additionally, the porous absorbing wall absorbs the transverse wave and yields detonation decay and velocity deficit. After the absorbing wall, below some low initial pressure conditions, no re-initiation occurs and the deflagration propagates in critical deflagration for a relatively long distance.

The Influence of the Imperfectness of Contact Conditions on the Critical Velocity of the Moving Load Acting in the Interior of the Cylinder Surrounded with Elastic Medium

The dynamics of the moving-with-constant-velocity internal pressure acting on the inner surface of the hollow circular cylinder surrounded by an infinite elastic medium is studied within the scope of the piecewise homogeneous body model by employing the exact field equations of the linear theory of elastodynamics.It is assumed that the internal pressure is point-located with respect to the cylinder axis and is axisymmetric in the circumferential direction.Moreover,it is assumed that shear-spring type imperfect contact conditions on the interface between the cylinder and surrounding elastic medium are satisfied.The focus is on the influence of the mentioned imperfectness on the critical velocity of the moving load and this is the main contribution and difference of the present paper the related other ones.The other difference of the present work from the related other ones is the study of the response of the interface stresses to the load moving velocity,distribution of these stresses with respect to the axial coordinates and to the time.At the same time,the present work contains detail analyses of the influence of problem parameters such as the ratio of modulus of elasticity,the ratio of the cylinder thickness to the cylinder radius,and the shear-spring type parameter which characterizes the degree of the contact imperfection on the values of the critical velocity and stress distribution.Corresponding numerical results are presented and discussed.In particular,it is established that the values of the critical velocity of the moving pressure decrease with the external radius of the cylinder under constant thickness of that.

CRITICAL HYDROLOGIC CONDITIONS FOR OVERFLOW BURST OF MORAINE LAKE

Floodwater and debris flow caused by glacial lake burst is an important land process and a serious mountain disaster in glacial area of Xizang (Tibet) Autonomous Region, and the overflow burst is mainly caused by glacial landslide falling into moraine lake. On the premise that moraine lake is full, instantaneous burst in part of the lake bank happens, as flow velocity at burst mouth caused by overflow head is higher than threshold flow velocity of glacial till. Under some supposes, d(90) and d(10) of the glacial till in the hank were used as the threshold sizes of coarse and fine grains respectively. Thus, the formula of calculating threshold flow velocity of uniform sand was simplified, and threshold flow velocity of glacial till was calculated with the formula. Then, with synthesis formula calculating flow velocity of instantaneous part burst, flow velocity at overflow burst mouth was calculated, and calculation formula of critical height (H(0)) of overflow head was derived. Overflow head was caused by volume and surge of glacial landslide falling into moraine lake, calculation formulas of ascendant height (H(1)) of lake water surface and surge height (H(2)) on burst mouth caused by glacial landslide falling into moraine lake were derived. To sum up, critical hydrologic conditions of moraine lake burst with overflow form are: the burst is inevitable as H(1) > H(0); the burst is possible as H(1) < H(0) and (H(1)+H(2)) > H(0); the burst is impossible as (H(1)+H(2)) < H(0). In the factors influencing the burst critical conditions, it is advantageous for the burst that scale of the lake is 10(5)m(2) range; terminal glacial till is more fine and is even more uniform; the width of overflow mouth is even smaller than the length of the bank; the landslide has large scale and steep slip surface; and glacial end is close to the lake. With burst of Guangxiecuo Lake in Midui Valley of the Polongzangbu River in Xizang as an example, the burst critical conditions were tested.