Study of Neutron Cross Talk Rejection Based on Testing Experiment and Simulation

Experimental data analysis and simulation calculations were performed in order to evaluate the cross-talk rejection performance of a typical neutron detection array. For very closely packed scintillation bars, the CT rejection may rely on the position relation between the two signals. The criteria ｜△x｜≤ 15 cm and ｜△y｜≤12 cm are currently proposed for a rejection rate higher than 90%. For signals coming from distanced bars, the energy conservation relationship can be applied to reject the CT events with a similar performance. In both cases the results of simulation agree very well with the experimental data, assuring their applicability to other detection systems and physics problems.

On the Analysis Method of the Triple Test Cross Design

The analysis method of the triple test cross design has been discussed carefully from the two factor experiment design and the genetic models of additive dominant effect and of epistasis effect.Two points different from the previous reports have been concluded: (1)both the degrees of freedom of the orthogonal terms C2 and C3 are m, (2)the denominator in the F test to C2 and C3 is the error mean of square between plots.

Research on time-frequency cross mutual of motor imagination data based on multichannel EEG signal

At present,multi-channel electroencephalogram(EEG)signal acquisition equipment is used to collect motor imagery EEG data,and there is a problem with selecting multiple acquisition channels.Choosing too many channels will result in a large amount of calculation.Components irrelevant to the task will interfere with the required features,which is not conducive to the real-time processing of EEG data.Using too few channels will result in the loss of useful information and low robustness.A method of selecting data channels for motion imagination is proposed based on the time-frequency cross mutual information(TFCMI).This method determines the required data channels in a targeted manner,uses the common spatial pattern mode for feature extraction,and uses support vector ma-chine(SVM)for feature classification.An experiment is designed to collect motor imagery EEG da-ta with four experimenters and adds brain-computer interface(BCI)Competition IV public motor imagery experimental data to verify the method.The data demonstrates that compared with the meth-od of selecting too many or too few data channels,the time-frequency cross mutual information meth-od using motor imagery can improve the recognition accuracy and reduce the amount of calculation.

Characteristics of the Variation of Cross Fault Short-Baseline and Short-Range Leveling in Western Yunnan Earthquake Test Site Before Lijiang M_S7.0 Earthquake

Results of analysis of variation of cross fault short-baseline and short-range leveling in Western Yunnan Earthquake Test Site (WYETS), results show that among five observation stations of cross fault short-baseline and short-range leveling in WYETS before the Lijiang MS7.0 Earthquake occurred in February 1996 only Yongsheng observation station (epicentral distance 82 km) located at Chenghai fault shows great variation about one year before the earthquake. And the nearest observation station, Lijiang (epicentral distance 42 km); presents great coseismic variation, but does not show obvious anomalous variation before the earthquake. There are no significant variations related to the earthquake at the other three observation stations. Two methods are used in analysis of the observed data and some valuable results have been obtained.

The “Colour Family Drawing Test”: Assessing Children’s Perception of Family Relationships. Studies on Mental Health and Cross-Cultural Comparisons

We apply the Colour Family Drawing Test, as a development of the traditional black and white test, for cross-cultural comparison. The participants, aged 7 - 10 years, both genders, were examined individually. Each subject sat at a single table with a white rectangular card of standard size, 24 well-sharpened colour pencils, a black pencil, an eraser and other appropriate tools. S/he received this verbal instruction: “Draw your family”. The procedure was firstly applied to 120 participants attending primary schools of Rome (Biasi, Bonaiuto and Levin, 2014). The families were evaluated through a semi-structural interview conducted with the children’s teachers and divided into: Harmonious versus Very Conflictual Families. The drawings made by children of Harmonious Families consistently used “Reassuring and Playful Colours” (Pink, Orange, Sky Blue, Light Green, Light Yellow, other pastel colours);and were larger, tidier and more proportioned to respect the opposite group. Children belonging to Conflictual Families used mostly “Alarming and Serious Colours” (Grey, Black, Dark Bleu, Violet, Olive Green) and their drawings were less extended, more often disordered and had typical deformations such as figures too thin. A second investigation examined 120 participants belonging to Asian immigrant families residing in Italy. A third investigation examined 120 participants belonging to Russian families of Moscow. Both last two investigations obtained very similar results on the use of colours, and gave a confirmation of the relevance of the Colour Family Drawing Test.

Testing for Cross-Sectional Dependence in a RandomEffects Model

This paper extends and generalizes the works of [1,2] to allow for cross-sectional dependence in the context of a two-way error components model and consequently develops LM test. The cross-sectional dependence follows the first order spatial autoregressive error (SAE) process and is imposed on the remainder disturbances. It is important to note that this paper does not consider alternative forms of spatial lag dependence other than SAE. It also does not allow for endogeneity of the regressors and requires the normality assumption to derive the LM test.

线性规划的无比值检验criss-cross算法

Zionts提出的求解线性规划问题的criss-cross算法实际是一阶段算法,不过与传统一阶段算法不同,它交替进行原始和对偶迭代,而产生的既可以是原始可行解,也可以是对偶可行解。为了提高计算效率,文章提出了一种采用无比值检验规则的新criss-cross算法,基于新算法编制的一个稠密软件在对40个小问题进行的数值试验中,就迭代次数而言,以2.12的比率胜过了传统的两阶段算法。

Balloon test occlusion of internal carotid artery: Angiographic findings predictive of results

AIM: To reveal angiographic findings to predict the re-sult of balloon test occlusion(BTO).METHODS: The cerebral angiograms of 42 consecu-tive patients who underwent cerebral angiography in-cluding both the Matas and Allcock maneuvers and BTO were retrospectively analyzed. Visualization of the an-terior cerebral artery(ACA) and the middle cerebral ar-tery(MCA) by the cross flow on the tested side during the Matas or Allcock maneuver was graded on a 5-point scale. Circle of Willis(COW) anatomy with respect to the presence/absence of a collateral path to reach the tested internal carotid artery(ICA) was classified intofour categories. A univariate logistic analysis was used to analyze the associations between each angiographic finding and the BTO result. Sensitivity, specificity, accu-racy, positive predictive value, and negative predictive value for each finding were calculated. RESULTS: Five patients(12%) were BTO-positive and the remaining 37 patients(88%) were BTO-negative. Visualizations of the ACA and MCA as well as the COW anatomy were significantly associated with the BTO re-sult(P = 0.0051 for ACA, P = 0.0002 for MCA, and P < 0.0001 for COW anatomy). In particular, good MCA vi-sualization and the presence of an anterior connection(collateral path to the tested ICA from the contralateral ICA via the anterior communicating artery) in the COW were highly predictive for negative BTO(negative pre-dictive value = 100% for both).

CONTOUR DESIGN AND PRACTICE FOR A LOW RADAR CROSS SECTION VEHICLE

On the basis of the canard configuration a contour stealth design including chiefly the wing, the fuselage and their connection type is projected. The prime project of a blended wing body vehicle with canard is provided and through the change of the fuselage head form and the different fin disposals, the radar cross section (RCS) is optimized. The average value of RCS and the value of RCS in the ± 45 ° front sector for different designs are illustrated. The model measurement proves that the project having a sharp head fuselage and 30 ° angle double fin has the minimum value of RCS. The wind tunnel test to the model with RCS optimized proved that the vehicle project has excellent aerodynamic characteristics such as high lift curve slope, up to 26° stalling angle, high lift / drag ratio equal to 8, and also has low RCS value in the front sector and in the lateral sector.

USING CROSS-CORRELATION THEORY TO EXTRACT MODAL PARAMETERS IN FREQUENCY- DOMAIN

Conventional modal parameter identifications are usually based on frequencyresponse functions, which require measurements of both the input force and the resulting response.However, in many cases, only response data are available while the actual excitations (such aswind/wave load) are not measurable. Modal parameters estimation must base itself on response-onlydata. Over the past years, many time-domain modal parameter identification techniques fromoutput-only are proposed. A poly-reference frequency-domain modal identification scheme onresponse-only is presented. It is based on coupling the cross-correlation theory with conventionalfrequency-domain modal parameter extraction. An experiment using an airplane model is performed toverify the proposed method.

Study on Various Compositions of Polyvinyl Alcohol and Starch Blends by Cross-Linking with Glyoxal

The aim of this study is to analyze the various compositions of polyvinyl alcohol (PVA) and starch blends. The blends have been cross-linked with glyoxal to enhance its properties. The hydroxyl groups of PVA and starch react with glyoxal via formation of acetal bonds;hence crosslinking could take place. The cross-linking of glyoxal is observed in various analytical methods such as DSC and FTIR. The cross-linked blends showed better thermal and mechanical properties. Viscosity, tensile shear strength, pencil hardness and ultimate stress were evaluated to estimate the changes due to cross-linking. It was observed that the cross-linking is directly proportional to starch, since the starch hydroxyl groups are easily accessible for reacting. The cross-linked blend showed better cohesion between its chains, thereby increasing glass transition temperature. It was reflected in the subsequent increase in tensile strength properties.

Mutual neutralization in low-energy collisions of Na^(+)+H^(-)ions

The low-energy mutual neutralization(MN)reactions Na^(+)+H^(-)→Na(nl)+H have been studied by employing the full quantum-mechanical molecular-orbital close-coupling(QMOCC)method over a wide energy range of 10^(-3)-10^(3) e V/u.Total and state-selective cross sections have been investigated and compared with the available theoretical and experimental data,and the state-selective rate coefficients for the temperature range of 100-10000 K have been obtained.In the present work,all the necessary highly excited states are included,and the influences of rotational couplings and 10 active electrons are considered.It is found that in the energy below 10 e V/u,the Na(4s)state is the most dominant exit state with a contribution of approximately 78%to the branch fraction,which is in best agreement with the experimental data.For energies above 10 e V/u,the MN total cross section is larger than those obtained in other theoretical calculations and shows a slow decreasing trend because the main exit states change,when the energy is above 100 e V/u,the dominant exit state becomes the Na(3p)state,while the Na(4s)state becomes the third most important exit state.The datasets presented in this paper,including the potential energy curve,the radial and rotational couplings,the total and state-selective cross sections,are openly available at https://doi.org/10.57760/sciencedb.j00113.00112.

Self-Cross-Linked Tannin-Aminated Tannin Surface Coatings for Particleboard

Aminated tannins were prepared by reacting mimosa condensed tannin extract with ammonia yielding the substitution of many,if not all of the tannin hydroxyl groups with–NH_(2)groups.A tannin-aminated tannin(ATT)particleboard coating was then prepared by reacting raw tannin extract with aminated tannin extract and thus cross-linking the two by substituting tannin’s hydroxyl groups with the–NH_(2)groups on the aminated tannin to form–NH-bridges between the two.The resulting particleboard coating gave encouraging results when pressed at 180℃for 3 min.Conversely,the system in which tannin was reacted/cross-liked with urea(ATU)by a similar amination reaction did not perform as well as the ATT system,and this even when a higher curing temperature and longer hot press time were used.In particular its water repellence was worse probably due to the presence of urea and such a system with lower reactivity.Nonetheless,substituting the tannin–OHs with the urea–NH_(2)groups appeared to also take place.ATT gave better results than ATU as regards water repellence and mechanical resistance as shown by the cross cut test.The ATT system was shown to be between 95%and 98%biosourced.The difference appeared to be due,by TMA analysis,to the much faster formation of the ATT hardened network leading to a better cross-linked polymer coating.The chemical species formed for both the ATT and ATU system were studied by MALDI ToF and CP MAS^(13)C NMR.

The Trail Making Test in Morocco: Normative Data Stratified by Age and Level of Education

The purpose of this study is to design a Moroccan Trail Making Test B;explore the effects of age, education and gender on the performance of the Trail Making Test (TMT);and provide normative information in Moroccan subjects. Our normalization study was conducted on 348 subjects (156 female and 192 male). The subjects were classified into four groups based on age (18 - 39 years, 40 - 59 years, 60 - 69 years and ≥70 years), and three groups based on educational level (3 - 6 years, 7 - 10 years and ≥11 years). The data were analyzed using descriptive statistics through SPSS. The results displayed that increasing age and decreasing levels of education significantly result in a decreased performance on the Trail A, Moroccan Trail B and English Trail B. Only 229 bilingual subjects among the 348 initial subjects completed both versions of Trail B. There was no significant difference on performance between Moroccan Trail B and English Trail B for these subjects.

Automated Recovery of the 2012 Sumatera Aftershock Sequence Using Waveform Cross Correlation

We assess the performance of waveform cross correlation as applied to automatic and interactive processing of the aftershock sequence of the April 11, 2012 Sumatera Ms（IDC） = 8.2 earthquake. The XSEL （cross correlation standard event list） is compared to the REB （Reviewed Event Bulletin） issued by the IDC （International Data Centre）. The latter includes 1,181 aftershocks between April 11 and May 25. To automatically recover the sequence, sixteen aftershocks were selected from the IDC SEL3 （Standard Event List） available on April 13 and used as master events. Waveform templates from only seven IMS （International Monitoring System） array stations with the largest SNR （signal-to-noise ratio） for the main shock were used to calculate cross correlation coefficients. Approximately 620,000 arrivals were detected and then used to build events according to the IDC definition. After conflict resolution between event hypotheses with similar arrivals found by more than one master, all survived hypotheses populated the XSEL. The total number of distinct hypotheses was 4,924, with 2,763 hypotheses not matched by the REB, i.e. potentially new REB events. To evaluate the quality of the XSEL, we randomly selected a representative portion （-15%） from 2,763 hypotheses and reviewed them interactively according to standard IDC rules and guidelines. There were 119 new REB events built and 145 XSEL hypotheses rejected. Several frequency and probability density distributions have been constructed for all detections, the associated detections, the XSEL detections, the detections in the new REB, and rejected events.

Research on Well Testing Interpretation of Low Permeability Deformed Dual Medium Reservoir

Considering the influence of quadratic gradient term and medium deformation on the seepage equation, a well testing interpretation model for low permeability and deformation dual medium reservoirs was derived and established. The difference method was used to solve the problem, and pressure and pressure derivative double logarithmic curves were drawn to analyze the seepage law. The research results indicate that the influence of starting pressure gradient and medium deformation on the pressure characteristic curve is mainly manifested in the middle and late stages. The larger the value, the more obvious the upward warping of the pressure and pressure derivative curve;the parameter characterizing the dual medium is the crossflow coefficient. The channeling coefficient determines the time and location of the appearance of the “concave”. The smaller the value, the later the appearance of the “concave”, and the more to the right of the “concave”.

RCS SCALE-MODEL-TESTING METHOD BY VARIANCE IN THE SIZE FOR SIMPLY SHAPED SCATTERERS

t According to a general representation of physical scale factor of RCS for variance in the size of simply shaped scatterers, a novel RCS model-testing method is described. The computed results of the prototype scatterers by this method from the model-testing agree well with their measured values both for two kinds of simply shaped scatterers, cylinders and ladder-shaped plates.

复杂受荷下盾构隧道原型结构试验平台的研发与实证

盾构隧道结构在全寿命周期中往往将面临诸多复杂荷载状态,如注浆、偏载、偏转等非对称偏不利工况。为验证结构在这些复杂荷载状态下的适用性,探究结构力学性能,开展足尺原型结构试验研究往往是最为直接而有效的手段。既有原型试验主要关注隧道结构在简单对称荷载条件下的力学性能,鲜有关注复杂非对称荷载状态。为拓展原型试验的适用范围,提出了适用于不同断面盾构隧道结构的原型试验平台和用于模拟复杂荷载状态的试验荷载设计方法。该方法适用于任意加载点布置和液压站分组的试验系统,可对注浆、偏载、偏转等复杂荷载状态下结构响应进行精确模拟。通过类矩形盾构隧道、双圆隧道和圆形隧道的偏载原型结构试验研究,验证了试验平台和试验荷载设计方法的适用性。进一步针对试验关键参数的分析表明,控制目标权重系数的调整能有效满足不同的试验模拟要求;基于试验荷载设计方法优化的迭代算法能有效考虑计算模型或边界支承条件的非线性;环箍钢绞线和千斤顶的组合加载模式能将拟合误差水平降低至千斤顶加载模式的1/5,但需要删去部分加载点使试验荷载合理且适用;对于越复杂的结构和荷载,精确模拟结构状态需要的试验系统独立荷载组数越高,对试验平台的要求也越高。

液化场地大直径变截面单桩动力响应研究

为研究不同地震动强度下液化场地大直径变截面单桩的动力响应规律,基于振动台试验,选取5010波,在地震动强度0.10g~0.45g作用下,研究液化场地砂土孔压比和大直径变截面单桩桩顶水平位移、桩身弯矩、桩身加速度时程响应及桩基损伤等变化规律.试验结果表明:饱和砂土孔压比随着地震动强度的增大上升明显,地震动强度≥0.30g时,饱和砂土孔压比稳定值在0.9附近,此时砂土完全液化;在0.45g地震动强度作用下,桩身加速度、桩顶水平位移及桩身弯矩均达到最大;桩身不同位置处加速度峰值出现时刻均滞后于输入地震波加速度峰值出现时刻,且桩顶及变截面的加速度响应比桩端的响应更弱;不同地震动强度作用下,桩身弯矩最大值均出现在液化土层和非液化土层分界处,且变截面处弯矩小于土层分界面处;地震动强度达到0.30g时,大直径变截面单桩桩身发生损伤.因此,液化场地下大直径变截面桥梁单桩基础抗震设计时,应该重点考虑饱和砂土层分界处、变截面处的抗弯能力,以确保单桩桩身强度满足抗震要求.