PERVAPORATION PROPERTIES OF PDMS MEMBRANES CURED WITH DIFFERENT CROSS-LINKING REAGENTS FOR ETHANOL CONCENTRATION FROM AQUEOUS SOLUTIONS

Ethanol perm-selective PDMS/PVDF composite membranes were prepared by curing polydimethylsiloxane (PDMS) with various cross-linking reagents,such as tetraethoxylsilane(TEOS),γ-aminopropyltriethoxylsilane(APTEOS), phenyltrimethoxylsilane(PTMOS) and octyltrimethoxylsilane(OTMOS) as well.The cross-linking density and surface properties of the PDMS active layer were adjusted by varying cross-linking reagents.The pervaporation performance of PDMS membranes cured with different cross-linking reagents was investig...

Solid-state NMR of vulcanized natural rubber/butadiene rubber blends:Local organization and cross-linking heterogeneities This article is part of the virtual special issue“Solid-state NMR studies on polymers and biological solids”

Elastomer blends,among which natural rubber(NR)and butadiene rubber(BR),are involved in many components of the automotive/tire industry.A comprehensive understanding of their mechanical behavior requires,among other features,a detailed description of the crosslink density in these mixtures.In the case of vulcanized immiscible blends,the distribution of the cross-link density within each of the NR-and BR-rich domains is key information,but difficult to determine using the conventional approaches used for one-component crosslinked elastomers.In this study,the vulcanization within NR/BR blends is investigated using a robust^(1)H double-quantum(DQ)MAS recoupling experiment,BaBa-xy16.Two kinds of cross-linked NR/BR blends were considered with two different microstructures for the BR component.The bulk organization of the resulting blends was first probed by analyzing the^(1)H spin-lattice relaxation behavior.In a second step,BaBa-xy16 was used to investigate,in a selective way,the cross-link heterogeneities within NR/BR blends.In particular,for immiscible NR/BR mixtures,the distribution of the cross-link density between both phases was compared and the observed differences were discussed.

Early changes in corneal densitometry after FS-LASIK combined with accelerated corneal cross-linking for correction of high myopia

AIM:To observe the effects of femtosecond laserassisted excimer laser in situ keratomileusis combined with accelerated corneal cross-linking(FS-LASIK Xtra)on corneal densitometry after correcting for high myopia.METHODS:In this prospectively study,130 patients underwent FS-LASIK or FS-LASIK Xtra for high myopia.Their right eyes were selected for inclusion in the study,of which 65 cases of 65 eyes in the FS-LASIK group,65 patients with 65 eyes in the FS-LASIK Xtra group.Patients were evaluated for corneal densitometry at 1,3,and 6mo postoperatively using Pentacam Scheimpflug imaging.RESULTS:Preoperative differences in corneal densitometry between the FS-LASIK and FS-LASIK Xtra groups in different ranges were not statistically significant(P>0.05).Layer-by-layer analysis revealed statistically significant differences in the anterior(120μm),central,and total layer corneal densitometry between the FS-LASIK and FS-LASIK Xtra groups at 1 and 3mo postoperatively(all P<0.05),the FS-LASIK Xtra group is higher than that of the FS-LASIK group.Analysis of different diameter ranges showed statistically significant differences between the FS-LASIK group and the FS-LASIK Xtra group at 1mo postoperatively in the ranges of 0–2,2–6,and 6–10 mm(both P<0.05);At 3mo postoperatively,the FS-LASIK Xtra group is higher than that of the FS-LASIK group in the ranges of 0–2 and 2–6 mm(P<0.05).At 6mo postoperatively,there were no statistically significant differences in corneal densitometry between the FS-LASIK group and the FS-LASIK Xtra group in different diameter ranges(all P>0.05).CONCLUSION:There is an increase in internal corneal densitometry during the early postoperative period after FS-LASIK Xtra for correction of high myopia.However,the densitometry values decreased to the level of conventional FS-LASIK at 6mo after surgery,with the most significant changes observed in the superficial central zone.

Exploitation of Fenton and Fenton-like reagents as alternative conditioners for alum sludge conditioning

The use of Fenton＇s reagent （Fe^2＋/H2O2） and Fenton-like reagents containing transition metals of Cu（Ⅱ）, Zn（Ⅱ）, Co（Ⅱ）, and Mn（Ⅱ） for an alum sludge conditioning to improve its dewaterability was investigated. The results obtained were compared with those obtained from conditioning the same alum sludge using cationic and anionic polymers. Experimental results show that Fenton＇s reagent was the best among the Fenton and Fenton-like reagents for the alum sludge conditioning. A considerable effectiveness of capillary suction time （CST） reduction efficiency of 47% can be achieved under test conditions of Fe^2＋/H2O2 = 20/125 mg/g DS （dry solid） and pH 6.0. The observation of floc-like particles after Fenton＇s reagent conditioning of alum sludge suggested that the mechanism of Fenton＇s reagent conditioning was different from that of polymer conditioning. In spite of the lower efficiency in the CST reduction of Fenton＇s reagent in alum sludge conditioning compared to that of polymer conditioning, Fenton＇s reagent offers a more environmentally safe option. Tiffs study provided an example of proactive treatment engineering, which is aimed at seeking a safe alternative to the use of polymers in sludge conditioning towards achieving a more sustainable sludge management strategy.

Studies on New Additions to 5-Methoxy-2 (5H)-Furanone: 1, 4-Addition of Grignard Reagents, and 1,3-Dipolar Cycloaddition of Silyl Nitronates

1,4-Addition reaction of Grignard's reagent to 5-methoxy-2(5H)-furanone 1 was accomplished. which provided a new possible route for synthesizing beta -alkyl-Y-alkyloxy-Y-butyrolactone. A novel concise method of preparing fused heterocyclic compounds was offered by 1,3-dipolar cycloaddition reaction of silyl nitronates to 1.

Stereoselective Addition of Organotitanium and Grignard Reagents to 3,5-O-isopropylidene-L-glucurono-γ-lactone

Substituted PhMgX and PhTi(OCHMe2)4MgX react with 3,5-O-isopropylidene-L-glucurono-γ-lactone 4 to give tetrads 5a-e and its stereoisomers 6a-e Tetrads 5a-e are the important intermediates in the synthesis of howiinol Al and its derivatives. The stereoselectivities of substituted PhTi(OCHMe2)4Mg (5a-e:6a-e ratio, 68-72:32-28) were better than those of substituted PhMgX(33-64:67-36) in the reaction. The effects of different substitUted groups and positions (p-Me, m-Me, o-MeO, p-Cl) of the phenyl ring on their stereoselectivies were not significant.

Interaction effects of flotation reagents for SAG mill reject of copper sulphide ore using response surface methodology

Flotation reagents have a complex behaviour in the beneficiation of base minerals in clayey ores.Interaction effects of reagents on the efficiency of copper flotation for a highly clayey low-grade sulphide ore were investigated using a central composite design.Preliminary results showed that sodium-isopropyl-xanthate(SIPX)and O-isopropyl-N-ethyl-thionocarbamate(IPETC)were found to be the most efficient collectors in the presence of lime as the pH regulator.The effects of dosage of collectors(SIPX and IPETC)and the dosage of methyl-isobutyl-carbonyl(MIBC)as frother on the separation efficiency were evaluated at different pH levels.Based on the analysis of variance(ANOVA),the interaction effects of the collector−pH and collector−frother were significant for the separation efficiency.At the low level of collector dosage,increasing pH from 9 to 11 enhanced copper separation efficiency from 81%to 86%for IPETC and from 77%to 86%for SIPX.Results of ANOVA showed that the maximum copper separation efficiency(88.7%)was obtained at the dosages of 8.6 g/t SIPX,7 g/t IPETC and 20 g/t MIBC at pH 11.Finally,it was concluded that a mixture of SIPX and IPETC collectors was more suitable to treat highly clayey sulphide ores.

Experimental study on the treatment of rabbit corneal melting after alkali burn with Collagen cross-linking

AIM: To evaluate the effect of Collagen cross-linking on the prevention of melting in rabbit corneas after alkali burn. METHODS: Twenty New Zealand white rabbits were randomly divided into model control group and collagen cross-linking treatment group. The second group of rabbits received collagen cross linked treatment. Both groups were applied with antibiotic eye drops to prevent infection. The corneas were evaluated for melting, opacity, pathological and immunohistochemistry, record the changes when 28 days after the animals were killed. RESULTS: In the control group, 6 out of 8 rabbits showed corneal melting after injury (14 +/- 4) days, while two corneal perforated. In collagen cross-linking treatment group, one rabbit showed corneal melting after injury 23 days, without corneal perforation; corneal dissolution rate between the two groups was significantly different (P <0.05). Pathological examination suggested that in the treatment group, mild corneal edema, mild damage to collagen fibers, inflammatory cell infiltration was significantly less than the control group. Immunohistochemistry showed that corneal collagen fibers arranged in neat rows in the control group. CONCLUSION: Collagen cross-linking treatment not only can prevent and delay the corneal melting after alkali burn, but also can reduce the destruction of corneal collagen fibers and infiltration of inflammatory cells in the corneal tissue.

Radiation-induced cross-linking:a novel avenue to permanent 3D modification of polymeric membranes

Membrane fouling is always the biggest problem in the practice of membrane separation technologies,which strongly impacts their applicability,separation efficiency,cost effectiveness,and service lifespan.Herein,a simple but effective 3D modification approach was designed for permanently functionalizing polymeric membranes by directly cross-linking polyvinyl alcohol(PVA)under gamma-ray irradiation at room temperature without any additives.After the modification,a PVA layer was constructed on the membrane surface and the pore inner surface of polyvinylidene fluoride(PVDF)membranes.This endowed them with good hydrophilicity,low adsorption of protein model foulants,and easy recoverability properties.In addition,the pore size and distribution were customized by controlling the PVA concentration,which enhanced the rejection ability of the resultant membranes and converted them from microfiltration to ultrafiltration.The crosslinked PVA layer was equipped with the resultant membranes with good resistance to chemical cleaning by acidic,alkaline,and oxidative reagents,which could greatly prolong the membrane service lifetime.Furthermore,this approach was demonstrated as a universal method to modify PVDF membranes with other hydrophilic macromolecular modifiers,including polyethylene glycol,sodium alginate,and polyvinyl pyrrolidone.This modification of the membranes effectively endowed them with good hydrophilicity and antifouling properties,as expected.

A short-term study of corneal collagen cross-linking with hypo-osmolar riboflavin solution in keratoconic corneas

AIM: To report the 3mo outcomes of collagen crosslinking(CXL) with a hypo-osmolar riboflavin in thin corneas with the thinnest thickness less than 400 μm without epithelium.METHODS: Eight eyes in 6 patients with age 26.2±4.8y were included in the study. All patients underwent CXL using a hypo-osmolar riboflavin solution after its de-epithelization. Best corrected visual acuity, manifest refraction, the thinnest corneal thickness, and endothelial cell density were evaluated before and 3mo after the procedure.RESULTS: The mean thinnest thickness of the cornea was 408.5 ±29.0 μm before treatment and reduced to369.8 ±24.8 μm after the removal of epithelium. With the application of the hypo-osmolar riboflavin solution, the thickness increased to 445.0 ±26.5 μm before CXL and recover to 412.5 ±22.7 μm at 3mo after treatment, P =0.659). Before surgery, the mean K-value of the apex of the keratoconus corneas was 57.6 ±4.0 diopters, and slightly decreased(54.7±4.9 diopters) after surgery(P =0.085). Mean best-corrected visual acuity was 0.55 ±0.23 logarithm of the minimal angle of resolution, and increased to 0.53±0.26 logarithm after surgery(P =0.879).The endothelial cell density was 2706.4 ±201.6 cells/mm2 before treatment, and slightly decreased( 2641. 2 ±218.2 cells/mm2) at last fellow up(P =0.002).CONCLUSION: Corneal collagen cross-linking with a hypo-osmolar riboflavin in thin corneas seems to be a promising treatment. Further study should be done to evaluate the safety and efficiency of CXL in thin corneas for the long-term.

Systematic review and Meta-analysis comparing modified cross-linking and standard cross-linking for progressive keratoconus

AIM：To compare the effectiveness and safety between modified cross-linking（MC）and standard cross-linking（SC）in mild or moderate progressive keratoconus.METHODS：Eligible studies were retrieved from four electronic databases,including CENTRAL,Clinical Trials gov,Pup Med and OVID MEDLINE.We set post-surgical maximum K value（Kmax）as the primary outcome.In addition,uncorrected and corrected distant visual acuity（UDVA and UDVA）,spherical equivalent（SE）,endothelial cell density（ECD）,central cornea thickness（CCT）and depth of demarcation line（DDL）were Meta-analyzed as secondary outcomes.Mean differences for these outcomes were pooled through either a random-effect model or fixed-effect model according to data heterogeneity.RESULTS：Twenty-four comparative studies either on accelerated cross-linking（AC）compared with SC or on transepithelial cross-linking（TC）compared with SC were included and pooled for analysis.The results indicated that MC was significantly inferior to SC at delaying Kmax deterioration[AC vs SC 0.49（95%CI：0.04-0.94,I2=75%,P=0.03）;TC vs SC 1.15（95%CI：0.54-1.75,I2=50%,P=0.0002）].SE decreased significantly for SC when compared to AC[0.62（95%CI：0.38-0.86,I2=22%,P〈0.00001）].DDL of SC was more significantly deeper than that of TC[-133.49（95%CI：-145.94 to-121.04,I2=33%,P〈0.00001）].Other outcomes demonstrated comparable results between MC and SC.CONCLUSION：SC is more favorable at halting the progression of keratoconus,but visual acuity improvement showed comparable results between MCs and SC.

Corneal collagen cross-linking and liposomal amphotericin B combination therapy for fungal keratitis in rabbits

AIM： To observe the therapeutic effect of corneal collagen cross-linking（CXL） in combination with liposomal amphotericin B in fungal corneal ulcers.METHODS： New Zealand rabbits were induced fungal corneal ulcers by scratching and randomly divided into 3groups, i.e. control, treated with CXL, and combined therapy of CXL with 0.25% liposomal amphotericin B（n =5 each）. The corneal lesions were documented with slit-lamp and confocal microscopy on 3, 7, 14, 21 and 28 d after treatment. The corneas were examined with transmission electron microscopy（TEM） at 4wk.RESULTS： A rabbit corneal ulcer model of Fusarium was successfully established. The corneal epithelium defect areas in the two treatment groups were smaller than that in the control group on 3, 7, 14 and 21d（P 〈0.05）. The corneal epithelium defect areas of the combined group was smaller than that of the CXL group（P 〈0.05） on 7 and 14 d, but there were no statistical differences on 3, 21 and 28 d. The corneal epithelium defects of the two treatment groups have been healed by day 21. The corneal epithelium defects of the control group were healed on 28 d. The diameters of the corneal collagen fiber bundles（42.960 ±7.383 nm in the CXL group and 37.040±4.160 nm in the combined group） were thicker than that of the control group（24.900±1.868 nm）,but there was no difference between the two treatment groups. Some corneal collagen fiber bundles were distorted and with irregular arrangement, a large number of fibroblasts could be seen among them but no inflammatory cells in both treatment groups. CONCLUSION： CXL combined with liposomal amphotericin B have beneficial effects on fungal corneal ulcers. The combined therapy could alleviate corneal inflammattions, accelerate corneal repair, and shorten the course of disease.

Vilsmeier Haack Adducts as Effective Reagents for Regioselective Nitration of Aromatic Compounds under Conventional and Non-Conventional Conditions

Nitration of aromatic Compounds is triggered by Vilsmeier-Haack reagent (DMF/POCl3) or (DMF/SOCl2) in the presence of KNO3 or NaNO2 under conventional and non-conventional conditions. The reactions af- forded corresponding Nitro derivatives in very good yield with high regioselectivity. The results obtained in non-conventional methods (Micro wave irradiation, Grinding, Sonication) are comparable with those ob- tained under conventional conditions, but the reaction times of former conditions are substantially shorter than that of the latter.

Construction of all-organic low dielectric polyimide hybrids via synergistic effect between covalent organic framework and cross-linking structure

Polyimide(PI)is a promising electronic packaging material,but it remains challenging to obtain an all-organic PI hybrid film with decreased dielectric constant and loss without modifying the monomer.Herein,a series of allorganic PI hybrid films were successfully prepared by introducing the covalent organic framework(COF),which could induce the formation of the cross-linking structure in the PI matrix.Due to the synergistic effects of the COF fillers and the cross-linking structure,the PI/COF hybrid film containing 2 wt%COF exhibited the lowest dielectric constant of 2.72 and the lowest dielectric loss(tanδ)of 0.0077 at 1 MHz.It is attributed to the intrinsic low dielectric constant of COF and a large number of mesopores within the PI.Besides,the cross-linking network of PI prevents the molecular chains from stacking and improves the fraction of free volume(FFV).The molecular dynamics simulation results are well consistent with the dielectric properties data.Furthermore,the PI/COF hybrid film with 5 wt%COF showed a significant enhancement in breakdown strength,which increased to 412.8 kV/mm as compared with pure PI.In addition,the PI/COF hybrid film achieve to reduce the dielectric constant and thermal expansion coefficient(CTE).It also exhibited excellent thermal,hydrophobicity,and mechanical performance.The all-organic PI/COF hybrid films have great commercial potential as next-generation electronic packaging materials.

Comparison of corneal biological parameters between transepithelial and epithelium-off corneal cross-linking in keratoconus

AIM:To evaluate the differences in corneal biological parameters between transepithelial and epithelium-off corneal cross-linking in keratoconus.METHODS:In our prospective clinical trial,40 patients(60 eyes)with progressive keratoconus were randomized to undergo corneal cross-linking with transepithelial(TE group,n=30)or epithelium-off(EO group,n=30)keratoconus.Examinations comprised topography,corneal biomechanical analysis and specular microscopy at 6 mo postoperatively.RESULTS:The keratometer values were not significantly different between the TE and EO corneal cross-linked groups in different periods(each P>0.05).The corneal thickness of the EO group was greater than that of the TE group at 1 wk after the operation(each P<0.05).Regarding corneal biomechanical responses,the EO group showed a longer second applanation length than TE group(P=0.003).Regarding the corneal endothelial function,standard deviation of the endothelial cell size,and coefficient of variation in the cell area,the values of EO group were larger than those of TE group at 1 wk(P=0.011,0.026),and the percentage of hexagonal cells in EO group was lower than that in TE group at 1 and 6 mo(P=0.018,0.019).CONCLUSION:Epithelium-off corneal cross-linking may strengthen corneal biomechanics better than TE procedure can.However,the TE procedure with a lower ultraviolet-A irradiation intensity would be safer for corneal endothelial function.

Nickel (Ⅱ) Complex Catalyzed Conjugate Addition Reaction of Functionalised Organozinc Reagents to α,β -Unsaturated Esters

Functionalized organozinc reagents can easily under 1, 4-addition reaction withunsaturated esters in the presence of catalytic amount of Ni (acac)_2 and tertiary ammes under verymild conditions to give the products in excellent yields.

A Facile Route for the Large Scale Fabrication of Graphene Oxide Papers and Their Mechanical Enhancement by Cross-linking with Glutaraldehyde

A facile route for the large scale production of graphene oxide(GO) papers and their mechanical enhancement has been presented in this work. The novel paper-like GO made from individual GO sheets in aqueous suspension can be achieved in large scale by a simple drop casting method on hydrophobic substrates.Significant enhancement in mechanical stiffness(341%) and fracture strength(234%) of GO paper have been achieved upon modification with a small amount(less than 10 wt%) of glutaraldehyde(GA). The cross-linking reaction takes place between hydroxyl groups on the surface of GO and aldehyde groups of GA, through forming hemiacetal structure, which can result in distinct mechanical enhancement of the GO papers.

fFabrication of three-dimensional proteinaceous micro- and nano-structures by femtosecond laser cross-linking

Proteins are a class of biomaterials having a vast array of functions, including the catalysis of metabolic reactions, DNA replication, stimuli response and transportation of molecules. Recent progress in laser-based fabrication technologies has enabled the formation of three-dimensional （3D） proteinaceous micro- and nano-structures by femtosecond laser cross-linking, which has expanded the possible applications of proteins. This article reviews the current knowledge andrecent advancements in the femtosecond laser cross-linking of proteins. An overview of previous studies related to fabri-cation using a variety of proteins and detailed discussions of the associated mechanisms are provided. In addition, ad-vances and applications utilizing specific protein functions are introduced. This review thus provides a valuable summaryof the 3D micro- and nano-fabrication of proteins for biological and medical applications.

Study of Sorption Properties of Anion Exchangers with Long-Chained Cross-Linking Agents for Tungsten Hydrometallurgy

The macroporous anion exchangers with long-chained cross-linking agents were investigated for the tungsten recovery from salt solutions.The physical-chemical characteristics of these sorbents were studied by means of sorption-desorption experiment aswell as electron and IR-spectroscopy.The anion exchangers on the basis of macroporous copolymers of methylacrylate and divinyl-ester of diethyleneglycol or tetravinyl-ester of pentaerythritol possess the exchange capacity to tungsten 2--5 times greater than the porous anion exchangers on the basis of styrene and divinylbenzene,therefore they can be used for selective tungsten recovery from comulex salt solutions.

Photo-induced Alignment Behavior of Azobenzene-containing Polymer Films with Different Cross-linking Degree

Three series of amorphous copolymers containing azobenzene groups with various substituents and certain amounts of crosslinkable acrylic groups were prepared. The cross-linked polymer films were obtained by thermal polymerization of the acrylic groups in the copolymers, during which, by controlling the time of cross-linking reaction, the films can be made with different cross-linking degree （from 0 to 32%, which was monitored by FT-IR spectra measurement）. Photo-induced alignment process of the films was performed under irradiation with linearly polarized light at 442 nm, and the effect of cross-linking degree on the photo-induced alignment rate was investigated. The dynamics of the photo-induced alignment was analyzed with biexponential curve fitting. The photo-induced alignment rate and the maximum transmittance of the films decreased because of the cross-linking. Furthermore, for the cross-linked samples, it was found that their saturated value of transmittances keep constant after repeated ＂writing＂ and ＂erasing＂ cycles. The findings reveal that the cross-linking of the film can effectively restrain the phototactic mass transport of azopolymer during irradiation by polarized light. The relationship between the cross-linking degree and the photo-induced alignment behavior of azopolymer is discussed in detail.