Detecting early changes in choroidal vascularity and thickness using optical coherence tomography in patients with corneal crosslinking for keratoconus

AIM:To investigate changes in choroidal thickness and vascularity in keratoconus patients treated with corneal crosslinking.METHODS:This study evaluated 28 eyes of 22 patients with keratoconus who underwent corneal crosslinking.The choroidal thicknesses were evaluated on enhanced depth imaging optical coherence tomography at the preoperative and postoperative 3d,1,and 3mo.Choroidal thickness in the four cardinal quadrants and the fovea were evaluated.The choroidal vascularity index was also calculated.RESULTS:There was no significant difference in central choroidal thickness between the preoperative and postoperative 3d,1mo(P>0.05).There was a significant increase in the 3mo(P=0.034)and a significant decrease in the horizontal choroidal vascularity index on the postoperative 3d(P=0.014),there was no statistically significant change in vertical axes and other visits in horizontal sections(P>0.05).CONCLUSION:This study sheds light on choroidal changes in postoperative corneal crosslinking for keratoconus.While it suggests the procedure’s relative safety for submacular choroid,more extensive research is necessary to confirm these findings and their clinical significance.

Stromal lenticule addition keratoplasty with corneal crosslinking for corneal ectasia secondary to FS-LASIK:a case series

●AIM:To explore the clinical efficacy and safety of stromal lenticule addition keratoplasty(SLAK)with corneal crosslinking(CXL)on patients with corneal ectasia secondary to femtosecond laser-assisted in situ keratomileusis(FS-LASIK).●METHODS:A series of 5 patients undertaking SLAK with CXL for the treatment of corneal ectasia secondary to FS-LASIK were followed for 4-9mo.The lenticules were collected from patients undertaking small incision lenticule extraction(SMILE)for the correction of myopia.Adding a stromal lenticule was aimed at improving the corneal thickness for the safe application of crosslinking and compensating for the thin cornea to improve its mechanical strength.●RESULTS:All surgeries were conducted successfully with no significant complications.Their best corrected visual acuity(BCVA)ranged from 0.05 to 0.8-2 before surgery.The pre-operational total corneal thickness ranged from 345-404μm and maximum keratometry(Kmax)ranged from 50.8 to 86.3.After the combination surgery,both the corneal keratometry(range 55.9 to 92.8)and total corneal thickness(range 413-482μm)significantly increased.Four out of 5 patients had improvement of corneal biomechanical parameters(reflected by stiffness parameter A1 in Corvis ST).However,3 patients showed decreased BCVA after surgery due to the development of irregular astigmatism and transient haze.Despite the onset of corneal edema right after SLAK,the corneal topography and thickness generally stabilized after 3mo.●CONCLUSION:SLAK with CXL is a potentially beneficial and safe therapy for advanced corneal ectasia.Future work needs to address the poor predictability of corneal refractometry and compare the outcomes of different surgical modes.

Crosslinking Mechanism of Soy Protein-based Adhesives based on Glyoxal and a Compound of Protein Model

The crosslinking mechanism of glyoxal and asparagine was analyzed,and the relationship between the mechanism and practical performances of soy protein-based adhesives was also discussed.It is shown that when pH=1 and 3,glyoxal reacted with asparagine in the form of major cyclic ether compounds.When pH=5,glyoxal reacted with asparagine in two structural forms of sodium glycollate and cyclic ether compounds.However,amidogens of asparagine were easy to develop protonation under acid conditions.Supplemented by the instability of cyclic ether compounds,the reaction activity and reaction degree between glyoxal and asparagine were relatively small.Under alkaline conditions,glyoxal mainly reacted with asparagine in the form of sodium glycollate.With the increase of pH,the polycondensation was more sufficient and the produced polycondensation products were more stable.The reaction mechanism between glyoxal and asparagine had strong correspondence to the practical performances of the adhesives.Glyoxal solution could develop crosslinking reactions with soy protein under both acid and alkaline conditions.Bonding strength and water resistance of the prepared soy protein-based adhesives were increased significantly.When pH>7,glyoxal had relatively high reaction activity and reaction intensity with soy protein,and the prepared adhesives had high crosslinking density and cohesion strength,showing relatively high bonding strength,water resistance and thermal stability.

Facile synthesis of chromium chloride/poly(methyl methacrylate) core/shell nanocapsules by inverse miniemulsion evaporation method and application as delayed crosslinker in secondary oil recovery

Cr(III)ehydrolyzed polyacrylamide(HPAM)gels have been extensively studied as a promising strategy controlling waste water production for mature oilfields.However,the gelation time of the current technologies is not long enough for in-depth placement.In this study,we report a novel synthesis method to obtain chromium chloride/poly(methyl methacrylate)(PMMA)nanocapsules which can significantly delay the gelation of HPAM through encapsulating the chromium chloride crosslinker.The chromium chloride-loaded nanocapsules(CreNC)are prepared via a facile inverse miniemulsion evaporation method during which the hydrophobic PMMA polymers,pre-dispersed in an organic solvent,were carefully controlled to precipitate onto stable aqueous miniemulsion droplets.The stable aqueous nanodroplets(W)containing Cr(III)are dispersed in a mixture of organic solvent(O1)with PMMA and nonsolvent medium(O2)to prepare an inverse miniemulsion.With the evaporation of the O1,PMMA forms CreNCs around the aqueous droplets.The CreNCs are readily transferred into water from the organic nonsolvent phase.The CreNCs exhibit the tunable size(358-983 nm),Cr loading(7.1%-19.1%),and Cr entrapment efficiency(11.7%-80.2%),with tunable zeta potentials in different PVA solutions.The CreNCs can delay release of Cr(III)and prolong the gelation time of HPAM up to 27 days.

Carcinoma-associated fibroblast-derived lysyl oxidase-rich extracellular vesicles mediate collagen crosslinking and promote epithelial-mesenchymal transition via p-FAK/ p-paxillin/YAP signaling

Carcinoma-associated fibroblasts(CAFs)are the main cellular components of the tumor microenvironment and promote cancer progression by modifying the extracellular matrix(ECM).The tumor-associated ECM is characterized by collagen crosslinking catalyzed by lysyl oxidase(LOX).Small extracellular vesicles(sEVs)mediate cell-cell communication.However,the interactions between sEVs and the ECM remain unclear.Here,we demonstrated that sEVs released from oral squamous cell carcinoma(OSCC)-derived CAFs induce collagen crosslinking,thereby promoting epithelial-mesenchymal transition(EMT).CAF sEVs preferably bound to the ECM rather than being taken up by fibroblasts and induced collagen crosslinking,and a LOX inhibitor or blocking antibody suppressed this effect.Active LOX(αLOX),but not the LOX precursor,was enriched in CAF sEVs and interacted with periostin,fibronectin,and bone morphogenetic protein-1 on the surface of sEVs.CAF sEV-associated integrinα2β1 mediated the binding of CAF sEVs to collagen I,and blocking integrinα2β1 inhibited collagen crosslinking by interfering with CAF sEV binding to collagen I.CAF sEV-induced collagen crosslinking promoted the EMT of OSCC through FAK/paxillin/YAP pathway.Taken together,these findings reveal a novel role of CAF sEVs in tumor ECM remodeling,suggesting a critical mechanism for CAF-induced EMT of cancer cells.

Novel polyimide binder for achieving high-rate capability and long-term cycling stability of LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2) cathode via constructing polar and micro-branched crosslinking network structure

LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)(NCM811)material,as the promising cathode candidate for next-generation highenergy lithium-ion batteries,has gained considerable attention for extremely high theoretical capacity and low cost.Nevertheless,the intrinsic drawbacks of NCM811 such as unstable structure and inevitable interface side reaction result in severe capacity decay and thermal runaway.Herein,a novel polyimide(denoted as PI-Om DT)constructed with the highly polar and micro-branched crosslinking network is reported as a binder material for NCM811 cathode.The micro-branched crosslinking network is achieved by using 1,3,5-Tris(4-aminophenoxy)benzene(TAPOB)as a crosslinker via condensation reaction,which endows excellent mechanical properties and large free volume.Meanwhile,the massive polar carboxyl(-COOH)groups provide strong adhesion sites to active NCM811 particles.These functions of PIOm DT binder collaboratively benefit to forming the mechanically robust and homogeneous coating layer with rapid Li+diffusion on the surface of NCM811,significantly stabilizing the cathode structure,suppressing the detrimental interface side reaction and guaranteeing the shorter ion-diffusion and electron-transfer paths,consequently enhancing electrochemical performance.As compared to the NCM811 with PVDF binder,the NCM811 using PI-Om DT binder delivers a superior high-rate capacity(121.07 vs.145.38 m Ah g^(-1))at 5 C rate and maintains a higher capacity retention(80.38%vs.91.6%)after100 cycles at 2.5–4.3 V.Particularly,at the high-voltage conditions up to 4.5 and 4.7 V,the NCM811 with PI-Om DT binder still maintains the remarkable capacity retention of 88.86%and 72.5%after 100 cycles,respectively,paving the way for addressing the high-voltage operating stability of the NCM811 cathode.Moreover,the full-charged NCM811 cathode with PI-Om DT binder exhibits a significantly enhanced thermal stability,improving the safety performance of batteries.This work opens a new avenue for developing high-energy NCM811 based lithium-ion batteries with long cycle-life and superior safety performance using a novel and effective binder.

Evaluation of different crosslinking methods in altering the properties of extrusion-printed chitosan-basedmulti-material hydrogel composites

Three-dimensional printing technologies exhibit tremendous potential in the advancing fields of tissue engineering and regenerative medicine due to the precise spatial control over depositing the biomaterial.Despite their widespread utilization and numerous advantages,the development of suitable novel biomaterials for extrusion-based 3D printing of scaffolds that support cell attachment,proliferation,and vascularization remains a challenge.Multi-material composite hydrogels present incredible potential in this field.Thus,in this work,a multi-material composite hydrogel with a promising formulation of chitosan/gelatin functionalized with egg white was developed,which provides good printability and shape fidelity.In addition,a series of comparative analyses of different crosslinking agents and processes based on tripolyphosphate(TPP),genipin(GP),and glutaraldehyde(GTA)were investigated and compared to select the ideal crosslinking strategy to enhance the physicochemical and biological properties of the fabricated scaffolds.All of the results indicate that the composite hydrogel and the resulting scaffolds utilizing TPP crosslinking have great potential in tissue engineering,especially for supporting neo-vessel growth into the scaffold and promoting angiogenesis within engineered tissues.

Comparative 2-year outcomes of conventional and accelerated corneal collagen crosslinking in progressive keratoconus

AIM:To compare the safety and efficacy of conventional versus accelerated(9 mW/cm^2)corneal collagen crosslinking(CXL)in progressive keratoconus at the 2-year follow-up.METHODS:In this prospective study,consecutive progressive keratoconus patients were randomized to receive either conventional CXL(CCXL)or accelerated CXL(ACXL;using hydroxypropyl methylcellulose-assisted riboflavin imbibition for 10 min at 9 mW/cm^2).Visual,refractive,keratometric,topographic,and aberrometric outcomes and stromal demarcation line depth(DLD)measurements were compared at the end of a 2-year follow-up.RESULTS:Thirty-two eyes from 32 patients in the CCXL and 27 eyes from 27 patients in the ACXL groups completed 2-year follow-up.At 2y post-CXL,both uncorrected and corrected visual acuities improved significantly in both groups.The improvements in keratometric readings,flattening rate(flattening of the maximum keratometry more than 1 D),3 topographic indices,and vertical coma were significantly better in the CCXL group compared to the ACXL group(P<0.05).The DLD as measured by anterior segment optical coherence tomography or in vivo confocal microscopy was better detectable and significantly deeper in the CCXL group compared to the ACXL group.The deeper DLD was found to be significantly correlated with improvements in the mean keratometry measurements.Progression was noted in 11.1%of eyes in the ACXL group,whereas progression was not observed in any patient eye in the CCXL group.CONCLUSION:In this prospective randomized study,ACXL is less effective in halting the progression of keratoconus at a 2-year follow-up compared to CCXL.

REACTION MECHANISM OF BENZOPHENONE-PHOTOINITIATED CROSSLINKING OF POLYETHYLENE

The radical intermediates, the crosslink microstructures, and the reaction mechanism of benzophenone (BP)-photoinitiated crosslinking of low-density polyethylene (LDPE) and model compounds (MD) have been reviewed in detail. The spin-trapping electron spin resonance (ESR) spectra obtained from the LDPE/BP systems with spin-trap agents show that two kinds of polymer radical intermediates are mainly formed: tertiary carbon and secondary carbon radicals. The spin-trapping ESR studies of MD/BP systems give further evidence that photocrosslinking reactions of PE predominantly take place a sites of tertiary carbon, secondary carbon, and especially allylic carbon when available. The high resolution C-13-NMR spectra obtained from LDPE and MD systems show that the crosslink microstructures have H- and Y-type links and that their concentrations are of the same order. The fluorescence, ESR, C-13 and H-1-NMR spectra from the PE and MD systems demonstrate that the main photoreduction product of BP (PPB) is benzpinacol formed by the recombination of two diphenylhydroxymethyl (K-.) radical intermediates. Two new PPB products: an isomer of benzpinacol with quinoid structure, 1-phenylhydroxymethylene-4-diphenylhydroxymethyl-2,5-cyclobexadiene and three kinds of alpha-alkyl-benzhydrols have been detected and identified. These results provide new experimental evidence for elucidating the reaction mechanism in the BP-photoinitiated crosslinking of polyethylene.

THE EFFECT OF PHOTO-CROSSLINKING ON THE ORIENTATION STABILITY OF POLYVINYL ALCOHOL CONTAINING 4-NITRO-4′-ALKOXYSTILBENE AND CINNAMYL PENDENT GROUPS

Crosslinking is one of the effective routes for improving the orientation stability of poled polymer films. The derivative of polyvinyl alcohol containing 4-nitro-4'-alkoxystilbene and photo-crosslinkable cinnamyl groups as side chains has been synthesized. The in-situ simultaneous photo-crosslinking poling of synthesized polymer films has teen performed, The second order nonlinear optical coefficient d(33) of poled film is 11 pm/V. The SHG measurements show that the break-over temperature of SHG signal is raised obviously after irradiation, its orientation stability is doubled as compared with that of non-crosslinking samples.

Study on Tribological Properties of Irradiated Crosslinking UHMWPE Nano-Composite

Ultra High Molecular Weight Polyethylene(UHMWPE)has been widely used as a bearing material for artificial joint replacement over forty years.It is usually crosslinked by gamma rays irradiation before its implantation into human body.In this study,UHMWPE and UHMWPE/nano-hydroxyapatite(n-HA)composite were prepared by vacuum hot-pressing method.The prepared materials were irradiated by gamma rays in vacuum and molten heat treated in vacuum just after irradiation.The effect of filling n-HA with gamma irradiation on tribological properties of UHMWPE was investigated by using friction and wear experimental machine(model MM-200)under deionized water lubrication.Micro-morphology of worn surface was observed by metallographic microscope.Contact angle and hardness of the materials were also measured.The results show that contact angle and hardness are changed by filling n-HA and gamma irradiation.Friction coefficient and wear rate under deionized water lubrication are reduced by filling n-HA.While friction coefficient is increased and wear rate is reduced significantly by gamma irradiation.The worn surface of unfilled material is mainly characterized as adhesive wear and abrasive wear,and that of n-HA filled material is mainly characterized as abrasive wear.After gamma irradiation,the degrees of adhesive and abrasive wear for unfilled material and abrasive wear of n-HA filled material are significantly reduced.Unfilled and filled materials after irradiation are mainly shown as slight fatigue wear.The results indicate that UHMWPE and UHMWPE/n-HA irradiated at the dose of 150 kGy can be used as bearing materials in artificial joints for its excellent wear resistance compared to original UHMWPE.

Crosslinked P84 copolyimide/MXene mixed matrix membrane with excellent solvent resistance and permselectivity

MXene is a novel 2D lamellar material with excellent hydrophilicity and permselectivity. MXene was introduced in the P84 polymer matrix and the matrix was crosslinked with triethylenetetramine(TETA) to improve the permselectivity and solvent resistance of the polyimide membrane. The membrane was characterized with SEM, AFM and ATR-FTIR, and effects of MXene content on the membrane morphology and separation performance are investigated. The membrane prepared with 18% P84 and 1% MXene shows high rejection(100%) to gentian violet(408) and high flux(268 L·m^-2·h^-1) at 0.1 MPa and ambient temperature. MXene endows the membrane with much water channel and denser functional layer which improves the membrane performance obviously. The membrane shows excellent solvent resistance to dimethylformamide(DMF), acetone and methanol after crosslinking with TETA during the 18 days of immersion.

Procyanidins Inhibit Tumor Angiogenesis by Crosslinking Extracellular Matrix

Objective： Procyanidins （PC） are widely available natural polyphenols. The present study is designed to investigate if PC can inhibit angiogenesis in lung adenocarcinoma xenografts through crosslinking vascular extracellular matrix （ECM） and preventing proteolysis by matrix metalloproteinases （MMPs）. Methods： Using the in vitro MMP-2 proteolysis and in vivo subcutaneous implantation models, we investigated if PC crosslinking inhibits MMP-mediated proteolysis. Using a cultured cell detachment assay, an in vitro angiogenesis assay, and a cell proliferation assay, we investigated if PC inhibits MMP-2-mediated endothelial cell detachment, angiogenesis, and cell proliferation, respectively. Using tumor xenografts, we evaluated if PC can inhibit growth of lung adenocarcinoma. Results： PC crosslink vascular ECM proteins, protecting them against proteolysis by MMPs in vitro and in vivo, protecting cultured human umbilical vein endothelial cells from detachment by MMP-2, and inhibiting in vitro angiogenesis. However, PC （0.75-100 μg/mL） did not inhibit vascular and tumor cells proliferation. PC injections （30 mg PC/kg bodyweight） in situ had anticancer effects on xenografts of lung adenocarcinoma, most likely by inhibiting angiogenesis during ECM proteolysis by MMPs. Conclusion： The results suggest that PC may be important MMP inhibitors that can be used as therapeutic anticancer agents.

Corneal collagen crosslinking for corneal ectasia of post-LASIK: one-year results

AIM: To evaluate the efficacy and safety of corneal collagen crosslinking (01) to prevent the progression of post-laser in situ keratomileusis (LASIK) corneal ectasia. METHODS: In a prospective, nonrandomized, single-centre study, CXL was performed in 20 eyes of 11 patients who had LASIK for myopic astigmatism and subsequently developed keratectasia. The procedure included instillation of 0.1% riboflavin-20% dextrane solution 30 minutes before UVA irradiation and every 5 minutes for an additional 30 minutes during irradiation. The eyes were evaluated preoperatively and at 1-, 3-, 6-, and 12-month intervals. The complete ophthalmologic examination comprised uncorrected visual acuity, best spectacle-corrected visual acuity, endothelial cell count, ultrasound pachymetry, corneal topography, and in vivo confocal microscopy. RESULTS: CXL appeared to stabilise or partially reverse the progression of post-LASIK corneal ectasia without apparent complication in our cohort. UCVA and BCVA improvements were statistically significant (P<0.05)beyond 12 months after surgery (improvement of 0.07 and 0.13 logMAR at 1 year, respectively). Mean baseline flattest meridian keratometry and mean steepest meridian keratometry reduction (improvement of 2.00 and 1.50 diopters (D), respectively) were statistically significant (P < 0.05) at 12 months postoperatively. At 1 year after 01, mean endothelial cell count did not deteriorate. Mean thinnest cornea pachymetry increased significantly. CONCLUSION: The results of the study showed a long-term stability of post-LASIK corneal ectasia after crosslinking without relevant side effects. It seems to be a safe and promising procedure to stop the progression of post-LASIK keratectasia, thereby avoiding or delaying keratoplasty.

Effect of Crosslink Structure of Bridge Polycarboxylate Superplasticizers on Dispersion Ability

Bridge polycarboxylate superplasticizers（PCs） with crosslink structure were synthesized by using polyethyleneglycol di-acrylate（PEGdA）, replacing partial polyethyleneglycol mono-acrylate （PEGmA） as crosslinking agent. Structures of bridge PCs were analyzed by gel permeation chromatography, and dispersion ability was evaluated by cement paste dispersity variation on time and rheology test. The experimental results showed that, molecular weight（MW） of bridge PCs increased with increase of PEGdA proportion, and MW distribution curve changed from Gaussian to fiat like, which meant notable increase of highly crosslinked copolymer. Bridge PCs led to decreased initial cement paste dispersity and better dispersity retention due to slow releasing. Further research showed that, PEGdA proportion had slight effect on polymerization degree of backbone, MW distribution of backbone deviated from Gaussian distribution and shoulder peaks appeared on distribution curve when PEGdA increased.

COORDINATION CROSSLINKING OF NITRILE RUBBER FILLED WITH COPPER SULFATE PARTICLES

By incorporating copper sulfate （CuSO4） particles into acrylonitrile butadiene rubber （NBR） followed by heat pressing, a novel vulcanization method is developed in rubber through the formation of coordination crosslinking. This method totally differs from traditional covalent or non-covalent vulcanization approaches of rubber. No other vulcanizing agent or additional additive is involved in this process. By analyzing the results of DMA, XPS and FT-IR, it is found that the crosslinking of CuSO4 particles filled NBR was induced by in situ coordination between nitrogen atoms of nitrile groups （-CN） and copper ions （Cu^2＋） from CuSO4. SEM and EDX results revealed the generation of a core （CuSO4 solid particle）- shell （adherent NBR） structure, which leads to a result that the crosslinked rubber has excellent mechanical properties. Moreover, poly（vinyl chloride） （PVC） and liquid acrylonitrile-butadiene rubber （LNBR） were used as mobilizer to improve the coordination crosslinking of CuSO4/NBR. The addition of PVC or LNBR could lead to higher crosslink density and better mechanical properties of coordination vulcanization. In addition, crystal water in CuSO4 played a positive role to coordination crosslinking of rubber because it decreased the metal point of CuSO4 and promoted the metal ionization.

Fabrication of high-performance PVA/PAN composite pervaporation membranes crosslinked by PMDA for wastewater desalination

The pyromellitic dianhydride（PMDA） crosslinked poly（vinyl alcohol）（PVA） was coated on top of the PAN ultrafiltration membrane to form a PVA/PAN composite PV membranes for wastewater desalination. The composite membranes have high application value in industrial wastewater treatment. By varying the membrane fabrication parameters including the weight percent（wt%） of the PMDA, the crosslink temperature and duration, membrane with the best desalination performance was obtained. The composite membrane with a 2-lm-thick PVA selective layer containing 20 wt% of PMDA and being crosslinked at 100 °C for 2 h showed the highest Na Cl rejection of 99.98% with a water flux of 32.26 L/（m^2 h）at 70 °C using the 35,000 ppm Na Cl aqueous solution as feed. FTIR spectroscopy, wide-angle X-ray diffraction, thermogravimetric analysis and scanning electron microscope have been used to characterize the structures and properties of both the crosslinked PVA dense films and PVA/PAN composite membranes. The effects of the concentrations of PMDA,the crosslinking time and temperature to the membrane water contact angle, swelling degree, salt rejection and water flux were systematically studied.

Development of Cardanol-Based Polyol via Click Chemistry and Crosslinking with Melamine Formaldehyde Resin for Coating Applications

The research work presented in this article deals with the synthesis of cardanol-based polyol and its curing with hexabutoxymethyl melamine(HBMM)for application in coatings.Cardanol-based polyol was prepared via thiol-ene click reaction using thioglycerol.Unsaturation present in the long chain of cardanol was successfully utilized to synthesize polyol via thiol-ene coupling.The reaction was carried out between cardanol and thioglycerol in the presence of Irgacure 184(photoinitiator)and 1,8-Diazabicyclo[5.4.0]undec-7-ene(catalyst)under UV light for 12 h at 80°C.After completion of the reaction,one mole of thioglycerol was successfully added across the double bond of a fatty chain of cardanol and confirmed by Fourier transform infrared spectroscopy(FTIR)and proton nuclear magnetic resonance spectroscopy and hydroxyl and iodine values were determined.Furthermore,the polyol thus prepared was cured with commercial HBMM in various proportions,such as 1:0.6,1:0.8 and 1:1,on an equivalent basis.The coatings were then characterized for mechanical,chemical,optical,thermal and anticorrosive properties.It was observed that coatings exhibited excellent performance properties as compared to that of its acrylic counterpart.

CHARACTERIZATION OF RADIATION CROSSLINKING DENSITY OF F-40

In this paper, radiation-induced crosslinking mechanism and characterization of the crosslinking density of F-40 and F-4 by X-ray photoelectron spectroscopy （XPS） have been studied. The dose of gelation of F-40 obtained from XPS is 4.1×10;Gy. It is found that crosslinking density is the largest in the range of certain dose for F-40 and F-4.

Study on Camellia Oleifera Protein based Wood Adhesive by Epoxy Resin and Its Crosslinking Mechanism

Epoxy resin (EPR) was used to crosslink with Camellia oleifera Abel.protein to prepare wood adhesive,and the bonding performance and curing characteristics of which were mainly investigated,and the synthesis mechanism was also discussed by using model compounds.The experimental results show that EPR can significantly improve the bonding performance of Camellia oleifera Abel.protein-based adhesive,and the maximum of which reaches 0.72 MPa satisfies the strength requirement of Type II plywood in GB/T 17657-2013.After alkali treatment,the protein can more easily crosslink with EPR at low curing temperature,and the adhesive has high degree of crystallinity of curing products,high degree of crosslinking reaction,and high bonding strength.The reaction mechanism of EPR-modified Camellia oleifera Abel.protein adhesive can be divided into resinification phase and curing phase.