Magmatic-hydrothermal Evolution and Mineralization Mechanisms of the Wangjiazhuang Cu(-Mo)Deposit in the Zouping Volcanic Basin,Shandong Province,China:Constraints from Fluid Inclusions

The Wangjiazhuang Cu(-Mo)deposit,located within the Zouping volcanic basin in western Shandong Province,China,is unique in this area for having an economic value.In order to expound the metallogenetic characteristics of this porphyry-like hydrothermal deposit,a detailed fluid inclusion study has been conducted,employing the techniques of representative sampling,fluid inclusion petrography,microthermometry,Raman spectroscopy,LA-ICP-MS analysis of single fluid inclusions,as well as cathode fluorescence spectrometer analysis of host mineral quartz.The deposit contains mainly two types of orebodies,i.e.veinlet-dissemination-stockwork orebodies in the K-Si alteration zone and pegmatiticquartz sulfide veins above them.In addition,minor breccia ore occurs locally.Four types of fluid inclusions in the deposit and altered quartz monzonite are identified:L-type one-or two-phase aqueous inclusions,V-type vapor-rich inclusions with V/L ratios greater than 50%-90%,D-type multiphase fluid inclusions containing daughter minerals or solids and S-type silicate-bearing fluid inclusions containing mainly muscovite and biotite.Ore petrography and fluid inclusion study has revealed a three-stage mineralization process,driven by magmatic-hydrothermal fluid activity,as follows.Initially,a hydrothermal fluid,separated from the parent magma,infiltrated into the quartz monzonite,resulting in its extensive K-Si alteration,as indicated by silicate-bearing fluid inclusions trapped in altered quartz monzonite.This is followed by the early mineralization,the formation of quartz veinlets and dissemination-stockwork ores.During the main mineralization stage,due to the participation and mixing of meteoric groundwater with magmatic-sourced hydrothermal fluid,the cooling and phase separation caused deposition of metals from the hydrothermal fluids.As a result,the pegmatitic-quartz sulfide-vein ores formed.In the late mineralization stage,decreasing fluid salinity led to the formation of L-type aqueous inclusions and chalcopyrite-sulfosalt ore.Coexistence of V-type and D-type inclusions and their similar homogenization temperatures with different homogenization modes suggest that phase separation or boiling of the ore-forming fluids took place during the early and the main mineralization stages.The formation P-T conditions of S-type inclusions and the early and the main mineralization stages were estimated as ca.156-182 MPa and 450-650℃,350-450℃,18-35 MPa and 280-380℃,8-15 MPa,respectively,based on the microthermometric data of the fluid inclusions formed at the individual stages.

Genesis of the Jianbeigou Gold Deposit on the Southern Margin of the North China Craton: Insights from Fluid Inclusions, H-O-S Isotopes, and Pyrite in situ Trace Element Analyses

The Jianbeigou gold deposit is a typical lode gold deposit in the Qinling metallogenic belt, located on the southern margin of the North China Craton. Three stages of the hydrothermal process can be distinguished, including the quartz ± pyrite, quartz-polymetallic sulfide, and quartz-carbonate ± pyrite stages. From the early to late stages, the homogenization temperatures of primary fluid inclusions are 281–362°C, 227–331°C, and 149–261°C, respectively. The corresponding salinities estimated for these fluids are 3.9–9.9 wt%, 0.4–9.4 wt%, and 0.7–7.2 wt% Na Cl equiv. Combined with laser Raman spectroscopy data, the ore-forming fluid belongs to a H_(2)O-CO_(2)-Na Cl ± CH_4 system with medium–low temperature and salinity. The δ~(18)Ofluid and δD values for the quartz veins are-1.0‰ to 6.0‰ and-105‰ to-84‰, respectively, which indicates that the ore-forming fluid is of mixed source, mainly derived from magma, with a contribution from meteoric water. Pyrite has been identified into three generations based on mineral paragenetic sequencing, including Py1, Py2, and Py3. The pyrites have δ~(34)S sulfur isotopic compositions from three stages between 3.7‰ and 8.4‰, indicating that sulfur mainly originated from magma. Te, Bi, Sb, and Cu contents in pyrite were all high and showed a strong correlation with Au concentrations. Native gold and the Au-Ag-Bi telluride minerals were formed concurrently, and the As concentration was low and decoupled from the Au content. Therefore, Te, Bi, Sb and other low-melting point chalcophile elements play an important role for gold mineralization in arsenic-deficient ore-forming fluid. Combined with the geological setting, evolution of pyrite, and ore-fluids geochemistry, we propose that the Jianbeigou deposit can be classified as a magmatic–hydrothermal lode gold deposit. Gold mineralization on the southern margin of the North China Craton is related to Early Cretaceous magmatism and formed in an extensional setting.

Fluid Inclusions of Calcite and Sources of Ore-forming Fluids in the Huize Zn-Pb-(Ag-Ge) District, Yunnan, China

The Huize Zn-Pb- (Ag-Ge) district is a typical representative of the well-known medium-to large-sized carbonate-hosted Zn-Pb- (Ag-Ge) deposits, occurring in the Sichuan-Yunnan-Guizhou Pb-Zn Ore-forming Zone. Generally, fluid inclusions within calcite, one of the major gangue minerals, are dominated by two kinds of small (1-10 um) inclusions including pure-liquid and liquid. The inclusions exist in concentrated groups along the crystal planes of the calcite. The ore-forming fluids containing Pb and Zn, which belong to the Na+-K+-Ca2+-Cl--F--SO42- type, are characterized by temperatures of 164-221℃, medium salinity in 5-10.8 wt% NaCl, and medium pressure at 410×105 to 661×105 Pa. The contents of Na+-K+ and C1--F-, and ratios of Na+/K+-Cl-/F- in fluid inclusions present good linearity. The ratios of Na+/K+ (4.66-6.71) and Cl-/F- (18.21-31.04) in the fluid inclusions of calcite are relatively high, while those of Na+/K+ (0.29-5.69) and Cl-/F- (5.00-26.0) in the inclusions of sphalerite and pyrite are relatively low. The ratio of Na+/K+ increases in accord with those of Cl-/F-, which indicates that ore-forming fluid of deep source participates in the mineralization. The waters of fluid inclusions have δD values from -43.5‰ to -55.4‰ of calcite. The δ18OV-SMOW values of the ore-forming fluids, calculated values, range from 17.09‰ to 18.56‰ of calcite and 17.80‰ to 23.14‰ for dolomite. δ13CV-PDB values range from -1.94‰ to -3.31‰ for calcite and -3.35‰ to 0.85‰ for the ore-bearing dolomite. These data better demonstrate that the ore-forming fluids were mainly derived from metamorphic water and magmatic hot fluid, in relation to the metamorphism of the Kunyang Group in the basement and magmatic hydrothermalism. The deposit itself might have resulted from ascending cycles of ore-forming fluid, enriched in Pb and Zn. The Huize Zn-Pb- (Ag-Ge) deposits related to carbonate-hosted Zn-Pb sulphides.

In situ Raman spectroscopic quantification of CH4–CO2 mixture: application to fluid inclusions hosted in quartz veins from the Longmaxi Formation shales in Sichuan Basin, southwestern China

We re-evaluate the Raman spectroscopic quantification of the molar ratio and pressure for CH4–CO2 mixtures.Firstly,the Raman quantification factors of CH4 and CO2 increase with rising pressure at room temperature,indicating that Raman quantification of CH4/CO2 molar ratio can be applied to those fluid inclusions(FIs)with high internal pressure(i.e.,>15 MPa).Secondly,the v1(CH4)peak position shifts to lower wavenumber with increasing pressure at constant temperature,confirming that the v1(CH4)peak position can be used to calculate the fluid pressure.However,this method should be carefully calibrated before applying to FI analyses because large discrepancies exist among the reported v1(CH4)-P curves,especially in the highpressure range.These calibrations are applied to CH4-rich FIs in quartz veins of the Silurian Longmaxi black shales in southern Sichuan Basin.The vapor phases of these FIs are mainly composed of CH4 and minor CO2,with CO2 molar fractions from4.4%to 7.4%.The pressure of single-phase gas FI ranges from 103.65 to 128.35 MPa at room temperature,which is higher than previously reported.Thermodynamic calculations supported the presence of extremely high-pressure CH4-saturated fluid(218.03–256.82 MPa at 200°C),which may be responsible for the expulsion of CH4 to adjacent reservoirs.

He-Ar Isotopic Systematics of Fluid Inclusions in Pyrites from PGEpolymetallic Deposits in Lower Cambrian Black Rock Series, South China

He-Ar isotopic compositions of fluid inclusions trapped in pyrites from some representative PGE-polymetallic deposits in Lower Cambrian black rock series in South China were analyzed by using an inert gas isotopic mass spectrometer. The results show that the ore-forming fluids possess a low 3He/4He ratio, varying from 0.43×10-8 to 26.39×10-8, with corresponding R/Ra value of 0.003-0.189. The 40Ar/36Ar ratios are 258-287, close to those of air saturated water (ASW). He-Ar isotopic indicator studies show that the ore-forming fluids were mainly derived from the formation water or basinal hot brine and sea water, while the content of mantle-derived fluid or deep-derived magmatic water might be negligible. The PGE-polymetallic mineralization might be related to the evolution of the Caledonian miogeosynclines distributed along the southern margin of the Yangtze Craton. During the Early Cambrian, the formation water or basinal hot brine trapped in Caledonian basins which accumulated giant thick sediments was expelled and migrated laterally along strata because of the pressure generated by overlying sediments. The basinal hot brine ascended along faults, mixed with sea water and finally deposited ore minerals.

Decrepitation Thermometry and Compositions of Fluid Inclusions of the Damoqujia Gold Deposit,Jiaodong Gold Province,China:Implications for Metallogeny and Exploration

The recently discovered Damoqujia （大磨曲家） gold deposit is a large shear zone-hosted gold deposit of disseminated sulphides located in the north of the Zhaoping （招平） fault zone, Jiaodong （胶东） gold province, China. In order to distinguish the temperature range of cluster inclusions from different mineralization stages and measure their compositions, 16 fluid inclusions and 5 isotopic geochemistry samples were collected for this study. Corresponding to different mineralization stages, the multirange peaks of quartz decrepitation temperature （250-270, 310-360 and 380-430℃） indicate that the activity of ore-forming fluids is characterized by multistage. The ore-forming fluids were predominantly of high-temperature fluid system （HTFS） by CO2-rich, and SO4^2--K^＋ type magmatic fluid during the early stage of mineralization and were subsequently affected by low-temperature fluid system （LTFS） of CH4-rich, and Cl^--Na^＋/Ca^2＋ type meteoric fluid during the late stage of mineralization. Gold is transferred by Au-HS^- complex in the HTFS, and Au-Cl^- complex can be more important in the LTFS. The transition of fluids from deeper to shallow environments results in mixing between the HTFS and LTFS, which might be one of the most key reasons for gold precipitation and large-scale mineralization. The ore-forming fluids are characterized by high-temperature, strong-activity, and superimposed mineralization, so that there is a great probability of forming large and rich ore deposit in the Damoqujia gold deposit. The main bodies are preserved and extend toward deeper parts, thereby suggesting a great potential in future.

Mineralization Styles and Genesis of the Yinkeng Au-Ag-Pb-Zn-Cu-Mn Polymetallic Orefield, Southern Jiangxi Province, SE China: Evidence from Geology, Fluid Inclusions, Isotopes and Chronology

The Yinkeng orefield in Yudu County,Jiangxi Province,SE China,is a zone of concentrated Au-Ag-Pb-Zn-Cu-Mn polymetallic ores.Based on summing up basic geology and ore geology of the orefieid,the polymetallic deposits in the orefield have been divided into seven major substyles according to their occurring positions and control factors.The ore-forming fluid inclusion styles in the orefield include those of two-phase fluid,liquid CO2-bearing three-phase and daughter mineral-bearing multi-phase.The homogenization temperatures range from 382° to 122℃,falling into five clusters of 370° to 390°,300° to 360°,230° to 300°,210° to 290° and 120° to 200°,and the clusters of 300° to 360°,230° to 300° and 120° to 200° are three major mineralization stages,with fluid salinity peaks from 4.14% to 7.31%,2.07% to 7.31% and 0.53% to 3.90%,respectively.The ore-forming fluids are mainly type of NaCl-H2O with medium to high density （0.74-1.02 g/cm3）,or CO2-bearing NaCl-H2O with medium to low density （0.18-0.79 g/cm3）.The fluid salinity and density both show a decline tendency with decreasing temperature.According to the measurement and calculation of Hand O-isotopic compositions in the quartz of the quartz-sulfide veins,δDV-SMOW of the ore-forming fluid is from-84‰ to-54‰,and δ18OV-SMOW of that is from 6.75‰ to 9.21‰,indicating a magmatic fluid.The δ34SV-CDT of sulfides in the ores fall into two groups,one is from-4.4‰ to 2.2‰ with average of-1.42‰,and the other from 18.8‰ to 21.6‰ with average of 19.8‰.The S-isotopic data shows one peak at-4.4‰ to 2.2‰ （meaning-1.42‰） suggesting a simple magmatic sulfur source.The ore Pbisotopic ratios are 206pb/204pb from 17.817 to 17.983,207pb/204pb from 15.470 to 15.620 and 208pb/204pb from 38.072 to 38.481,indicating characteristics of mantle-derived lead.The data show that the major ore deposits in the orefield have a magmatic-hydrothermal genesis and that the SHRIMP zircon age of the granodiorite porphyry,closely related to the mineralization,is 151.2±4.2 Ma （MSWD =1.3）,which can represent the formation ages of the ores and intrusion rocks.The study aids understanding of the ore-forming processes of the major metallic ore deposits in the orefield.

Genesis of the Zhaokalong Fe-Cu Polymetallic Deposit at Yushu, China: Evidence from Ore Geochemistry and Fluid Inclusions

The ore types of the Zhaokalong Fe-Cu deposit are divided into two categories： sulfide-type and oxide-type. The sulfide-type ore include siderite ore, galena-sphalerite ore and chalcopyrite ore, whereas the oxide-type ore include magnetite ore and hematite ore. The ore textures and structures indicate that the Zhaokalong deposit is of the sedimentary-exhalative mineralization type. Geochemical analyses show that the two ore types have a high As, Sb, Mn, Co and Ni content. The REE patterns reveal an enrichment of the LREE compared to the HREE. Isotopic analysis of siderite ore reveal that the j13CpDB ranges from -2.01 to 3.34 （%0） whereas the JISOsMow ranges from 6.96 to 18.95 （%0）. The fluid inclusion microthermometry results indicate that homogenization temperatures of fluid inclusions in quartz range from 131 to 181~C, with salinity values of 1.06 to 8.04 wt% NaCI eq. The mineralizing fluid therefore belongs to the low temperature - low salinity system, with a mineralizing solution of a CO2-Ca2＋（Na＋, K＋）-SO42- （F-, CI--H20 system. The geochemical results and fluid inclusion data provide additional evidence that the Zhaokalong deposit is a sedex-type deposit that experienced two stages of mineralization. The sulfide mineralization probably occurred first, during the sedimentary exhalative process, as exhibited by the abundance of marine materials associated with the sulfide ores, indicating a higher temperature and relatively deoxidized oceanic depositional environment. After the main exhalative stage, hydrothermal activity was superimposed to the sulfide mineralization. The later stage oxide mineralization occurred in a low temperature and relatively oxidized environment, in which magmatic fluid circulation was dominant.

Fluid Inclusions and Metallization of the Kendekeke Polymetallic Deposit in Qinghai Province, China

The Kendekeke polymetallic deposit,located in the middle part of the magmatic arc belt of Qimantag on the southwestern margin of the Qaidam Basin,is a polygenetic compound deposit in the Qimantag metallogenic belt of Qinghai Province.Multi-periodic ore-forming processes occurred in this deposit,including early-stage iron mineralization and lead-zinc-gold-polymetallic mineralization which was controlled by later hydrothermal process.The characteristics of the ore-forming fluids and mineralization were discussed by using the fluid inclusion petrography,Laser Raman Spectrum and micro-thermometry methods.Three stages,namely,S1-stage （copper-iron-sulfide stage）,S2-stage （lead-zinc-sulfide stage） and C-stage （carbonate stage） were included in the hydrothermal process as indicated by the results of this study.The fluid inclusions are in three types：aqueous inclusion （type I）,CO2-aqueous inclusion （type Ⅱ） and pure CO2 inclusion （type Ⅲ）.Type Ⅰ inclusions were observed in the S1-stage,having homogenization temperature at 240-320℃,and salinities ranging from 19.8％ to 25.0％ （wt％ NaCl equiv.）.All three types of inclusions,existing as immiscible inclusion assemblages,were presented in the S2-stage,with the lowest homogenization temperature ranging from 175 ℃ to 295℃,which represents the metallogenic temperature of the S2-stage.The salinities of these inclusions are in the range of 1.5％ to 16％.The fluid inclusions in the C-stage belong to types Ⅰ,Ⅱ and Ⅲ,having homogenization temperatures at 120-210℃,and salinities ranging from 0.9％ to 14.5％.These observations indicate that the ore-forming fluids evolved from high-temperature to low-temperature,from high-salinity to low-salinity,from homogenization to immiscible separation.Results of Laser Raman Spectroscopy show that high density of CO2 and CH4 were found as gas compositions in the inclusions.CO2,worked as the pH buffer of ore-forming fluids,together with reduction of organic gases （i.e.CH4,etc）,affected the transport and sediment of the minerals.The fluid system alternated between open and close systems,namely,between lithostatic pressure and hydrostatic pressure systems.The calculated metallogenic pressures are in the range of 30 to 87 Mpa corresponding to 3 km mineralization depth.Under the influence of tectonic movements,immiscible separation occurred in the original ore-forming fluids,which were derived from the previous high-salinity,high-temperature magmatic fluids.The separation of CO2 changed the physicochemical properties and composition of the original fluids,and then diluted by mixing with extraneous fluids such as meteoric water and groundwater,and metallogenic materials in the fluids such as lead,zinc and gold were precipitated.

Degree of Brine Evaporation and Origin of the Mengyejing Potash Deposit：Evidence from Fluid Inclusions in Halite

The Mengyejing potash deposit is located in the southern port of the Simao Basin, Yunnan Province, and is hosted in mid-Cretaceous strata. The chemical compositions of fluid inclusions in halite crystals, collected from the level-610 adit in the deposit, were analysed by laser ablation inductively coupled plasma mass spectrometry（LA-ICP-MS）. The results show that the brine is of the Na-K-Mg-Ca-Cl type and has K concentrations that are distinctly higher than those of Mg and Ca, unlike normal brines associated with Cretaceous halite. The high K concentrations indicate that the degree of evaporation of the ancient Mengyejing saline lake was very high, reaching the sylvite deposition stage but rarely reaching the carnallite deposition stage. The trajectory of the H and O isotopic compositions of the brines in the halite-hosted fluid inclusions corresponds to intense evaporation, indicating that the net evaporation exceeded the net inflow of brines. These brine compositions in halite-hosted fluid inclusions were likely formed by the dissolution of previously deposited K-bearing minerals by fresh continental and/or seawater, forming a type of modified seawater, with deep hydrothermal fluids potentially supplying additional potassium. The basin likely experienced multiple seawater incursion, dissolution and redeposition events in a high-temperature environment with high evaporation rates.

Discovery and Significance of High CH_4 Primary Fluid Inclusions in Reservoir Volcanic Rocks of the Songliao Basin,NE China

Comparing compositions of the fluid inclusions in volcanic rocks to the contents and isotopes of the gases in corresponding volcanic reservoirs using microthermometry, Raman microspectroscopy and mass spectrum analysis, we found that： （1） up to 82 mole% methane exists in the primary inclusions hosted in the reservoir volcanic rocks; （2） high CH4 inclusions recognized in the volcanic rocks correspond to CH4-bcaring CO2 reservoirs that are rich in helium and with a high ^3He/^4He ratio and which show reversed order of 813C in alkane; （3） in gas reservoirs of such abiotic methane （〉80%） and a mix of CH4 and CO2, the enclosed content of CH4 in the volcanic inclusions is usually below 42 mole%, and the reversed order of δ^13C in alkane is sometimes irregular in the corresponding gas pools; （4） a glassy inclusion with a homogeneous temperature over 900℃ also contains a small portion of CH4 although predominantly CO2. This affinity between gas pool and content of inclusion in the same volcanic reservoirs demonstrates that magma-originated gases, both CH4 and CO2, have contributed significantly to the corresponding gas pools and that the assumed hydrocarbon budget of the bulk earth might be much larger than conventionally supposed.

China's First Independent Cobalt Deposit and its Metallogenic Mechanism:Evidence from Fluid Inclusions and Isotopic Geochemistry

The Tuolugou cobalt deposit is the first independent large-scale Co- and Au-bearing deposit discovered in northwestern China. It is located in the eastern Kunlun orogenic belt in Qinghai Province, and occurs conformably in low-grade metamorphic volcano-sedimentary rock series with well-developed Na-rich hydrothermal sedimentary rocks and typical hydrothermal sedimentary ore fabrics. Fluid inclusions and isotopic geochemistry studies suggest that cobalt mineralizing fluid is dominated by NaCI-H20 system, accompanied by NaCI-CO2-H20-N2 system responsible for gold mineralization. Massive, banded and disseminated pyrite ores have similar compositions of He and Ar isotopes from the mineralizing fluid, with 3He/4He range between 0.10 to 0.31Ra （averaging 0.21Ra）, and 4~Ar/36Ar between 302 and 569 （averaging 373）, which reflects that Co mineralizing fluids derived dominantly from meteoric water deeply circulating. ~34S values of pyrite approaches to zero （~34S ranging from -4.5%o to ＋1.5%o, centering around -1.8%o to -0.2%o）, reflecting its deep source. Ore lead is characterized by distinctly high radiogenesis, with 2~6pb/2~4pb〉19.279, 2~7pb/2~4pb〉15.691 and 2~spb/2~4pb〉39.627, and its values show an increase trend from country rocks, regional Paleozoic volcanic rocks to ores. This may have suggested that high radiogentic ore Pb derived mainly from country rocks by leaching meteoric water-dominated hydrothermal fluid during its circulation at depth. Cobalt occurs mainly in sulfide phase （such as pyrite）, but cobalt enrichment, and presence and increasing contents of Co-bearing minerals have a positive correlation with metamorphic degree. The Tuolugou deposit and other typical strata-bound Co-Cu-Au deposits have striking similarities in the geological features and metallogenic pattern of primary cobalt. All of them are syngenetic hydrothermal exhalative sedimentation in origin.

Determination of Hydrocarbon Charging History by Diagenetic Sequence and Fluid Inclusions:A Case Study of the Kongquehe Area in the Tarim Basin

Petrographic analysis of hydrocarbon inclusions in reservoirs is the basis and prerequisite for study of hydrocarbon charge history using fluid inclusion analysis.Samples from Silurian reservoirs in the Kongquehe area were studied with microscopy,cathode luminescence and scanning electron microscopy,and the paragenetic sequence of diagenetic events was established.Aqueous and oil inclusions were found in four different occurrences,i.e.,① in healed cracks in detrital quartz grains,② in quartz overgrowths that were formed relatively early in diagenesis,③ in healed cracks crosscutting quartz overgrowths and detrital quartz,and ④ in paragenetically late calcite cements.Solid bitumens were found in intergranular pores and in late fractures,whereas gas inclusions occur in healed cracks crosscutting quartz overgrowths and detrital quartz.The homogenization temperatures of aqueous（Th_（aq）） and oil incluisons（Th_0） within individual fluid inclusion assemblages are very consistent,suggesting that the microthermometric data are reliable.The Th_（aq） values are generally larger than Th_0,indicating the oil charging events took place at significant depths.The results suggest that there were at least two episodes of hydrocarbon charging in the Kongquehe area：the early hydrocarbon charging occurred in late Caledonian,dominated by oil,and the late hydrocarbon charging occurred in the Yanshan-Himalayan,first by oil and then gases.In addition,two episodes of hydrocarbon reservoir adjustment and destruction occurred in the Hercynian and Himalayan,respectively,forming solid bitumen.

Characteristics of Hydrocarbon Fluid Inclusions and Their Significance for Evolution of Petroleum Systems in the Dabashan Foreland,Central China

Field investigation combined with detailed petrographic observation indicate that abundant oil,gas,and solid bitumen inclusions were entrapped in veins and cements of sedimentary rocks in the Dabashan foreland,which were used to reconstruct the oil and gas migration history in the context of tectonic evolution.Three stages of veins were recognized and related to the collision between the North China block and the Yangtze block during the Indosinian orogeny from Late Triassic to Early Jurassic（Dl）,the southwest thrusting of the Qinling orogenic belt towards the Sichuan basin during the Yanshanian orogeny from Late Jurassic to Early Cretaceous（D2）,and extensional tectonics during Late Cretaceous to Paleogene（D3）,respectively.The occurrences of hydrocarbon inclusions in these veins and their homogenization temperatures suggest that oil was generated in the early stage of tectonic evolution,and gas was generated later,whereas solid bitumen was the result of pyrolysis of previously accumulated hydrocarbons.Three stages of hydrocarbon fluid inclusions were also identified in cements of carbonates and sandstones of gas beds in the Dabashan foreland belt and the Dabashan foreland depression（northeastern Sichuan basin）,which recorded oil/gas formation,migration,accumulation and destruction of paleo-reservoirs during the D2.Isotopic analysis of hydrocarbon fluid inclusions contained in vein minerals shows that δ^（13）C_1 of gas in fluid inclusions ranges from-17.0‰ to-30.4‰（PDB） and δD from-107.7‰ to-156.7‰（SMOW）,which indicates that the gas captured in the veins was migrated natural gas which may be correlated with gas from the gas-fields in northern Sichuan basin.Organic geochemical comparison between bitumen and potential source rocks indicates that the Lower Cambrian black shale and the Lower Permian black limestone were the most possible source rocks of the bitumen.Combined with tectonic evolution history of the Dabashan foreland,the results of this study suggest that oil was generated from the Paleozoic source rocks in the Dabashan area under normal burial thermal conditions before Indosinian tectonics and accumulated to form paleo-reservoirs during Indosinian collision between the North China block and the Yangtz block.The paleo-reservoirs were destroyed during the Yanshanian tectonic movement when the Dabashan foreland was formed.At the same time,oil in the paleo-reservoirs in the Dabashan foreland depression was pyrolyzed to transform to dry gas and the residues became solid bitumen.

Organic Gases in Fluid Inclusions of Ore Minerals and Their Constraints on Ore Genesis:A Case Study of the Changkeng Au-Ag Deposit,Guangdong,China

The newly discovered Changkeng Au-Ag deposit is a new type of sediment-hostedprecious metal deposit. Most of the previous researchers believed that the deposit was formed bymeteoric water convection. By using a high vacuum quadrupole gas mass spectrometric system, ninelight hydrocarbons have been recognized in the fluid inclusions in ore minerals collected from theChangkeng deposit. The hydrocarbons are composed mainly of saturated alkanes C_(1-4) and unsaturatedalkenes C_(2-4) and aromatic hydrocarbons, in which the alkanes are predominant, while the contentsof alkenes and aromatic hydrocarbons are very low. The sum alka/sum alke ratio of most samples ishigher than 100, suggesting that those hydrocarbons are mainly generated by pyrolysis of kerogens insedimentary rocks caused by water-rock interactions at medium-low temperatures, and themetallogenic processes might have not been affected by magmatic activity. A thermodynamiccalculation shows that the light hydrocarbons have reached chemical equilibrium at temperatureshigher than 200 deg C, and they may have been generated in the deep part of sedimentary basins(e.g., the Sanzhou basin) and then be transported by ore-forming fluids to a shallow position of thebasin via a long distance. Most of the organic gases are generated by pyrolysis of the type IIkerogens (kukersite) in sedimentary host rocks, only a few by microorganism activity. Thecompositions and various parameters of light hydrocarbons in gold ores are quite similar to those insilver ores, suggesting that the gold and silver ores may have similar metallogenic processes.Based on the compositions of organic gases in fluid inclusions, the authors infer that the Changkengdeposit may be of a tectonic setting of continental rift. The results of this study support fromone aspect the authors' opinion that the Changkeng deposit is not formed by meteoric waterconvection, and that its genesis has a close relationship with the evolution of the Sanzhou basin,so it belongs to the sedimentary hot brine transformed deposit.

A TEM Study on Fluid Inclusions in Coesite-bearing Jadeite Quartzite in Shuanghe in the Dabie Mountains

Fluid inclusions at a nano to sub-micron scale in quartz from jadeite quartzite at Shuanghe, Dabie Mountains, have been investigated by using the transmission electron microscopy (TEM). Most fluid inclusions are spherical or negative crystal shaped, forming wide swarm-like trails. The TEM reveals that the relationship between coesite and the host quartz is syntaxic and provides strong evidence of the occurrence of high-salty fluids at peak metamorphic conditions. The fluid inclusions are often connected to dislocations, which are undetected at the scale of optical microscopy. Non-decrepitation leakage of fluid inclusions may occur by pipe diffusion of molecule H2O or CO2 along dislocations from the inclusions into the host quartz, thus leading to original inclusion density and composition changes. It should be taken into full account for the correct petrological interpretation of micro-thermometric results.

Thermodynamic Modeling of Fluid-Bearing Natural Gas Inclusions for Geothermometer and Geobarometer of Overpressured Environments in Qiongdongnan Basin, South China Sea

It is a very difficult problem to directly determine fluid pressure duringhydrocarbon migration and accumulation in sedimentary basins. pVt modeling of coupling hydrocarbonfluid inclusion of its coeval aqueous fluid inclusion provides a powerful tool for establishing therelationship of formation pressure evolution with time. Homogenization temperature of fluidinclusion can routinely be measured under microthermometric microscopy. Crushing technique has beenemployed to obtain the composition of fluid inclusions, and the commercial software VTFLINC easilyand rapidly completes the construction of p-t phase diagram. The minimum trapping pressure ofhydrocarbon fluid inclusion would be then determined in the p-t space. In this paper, three samplesof YC21-1-1 and YC21-1-4 wells at YC21-1 structural closure, Qiongdongnan basin, South China Sea,were selected for the pVt modeling practice, and the formation pressure coefficient (equals to fluidpressure/hydrostatic pressure) changing trend with time has primarily been established. Themodeling results also indicate that the reservoirs of Ling-shui and Yacheng formations in YC21-1structure are within a very high potential system and would have undergone a discharging of thermalfluids through top seal rupture, which depicts that there is a very high risk for natural gasexploration in this area.

Existence and release of fluid inclusions in bornite and its associated quartz and calcite

The existence and release of fluid inclusions in bornite and its associated minerals, namely, quartz and calcite were investigated and confirmed. The structures, forms, and phases of these large quantities of fluid inclusions were also studied. A mass of fluid inclusions with various sizes, distributions, shapes, and phases exist in bornite and its associated minerals. Their sizes vary from a few micrometers to tens of micrometers, and the forms appear as negative crystals, or elongated, elliptical, and irregular. At room temperature, fluid inclusions were mainly characterized as gas-liquid two- phase. However, small amounts of fluid inclusions with pure gas phase and pure liquid single-phase were also observed in quartz and calcite. These fluid inclusions initially broke during the ore crushing and grinding process and then released into the flotation pulp in the flotation process. The quantitative analysis of fluid inclusions in the solution and the comparisons of mineral dissolution show that the amount of copper and iron released by fluid inclusions in the bornite sample is higher than the amount dissolved by the mineral; fluid inclusions in the associated gangue minerals, quartz, and calcite also make contribution.

Fluid Inclusions of Orogenic Gold Deposits in the Zhongchuan Area,Western Qinling and Their Geological Significance

Orogenically-derived gold deposits of the Zhongchuan area in the western Qinling are distributed in the exo-contact thermal metamorphic zone. The country rocks hosting the deposits are predominantly of Devonian age with low-grade metamorphism and strong deformation with the ore deposits directly controlled by multi-level tectonic systems. Three types of inclusions from these deposits have been recognized: CO2-H2O, CO2-rich, and aqueous. The ore-forming fluids were mainly CO2-NaCl-H2O type characterized by rich CO2, low salinity, high temperature and immiscibility. Incorporated with earlier isotopic data, the regional geological setting and features of diagenesis and metallogeny, it can be concluded that the ore-forming fluids were derived from deep magma and mixed with meteoric and metamorphic water. The deposits formed during an intra-continent collisional orogeny, and some of the materials derived from the deep might have been involved in the ore-forming process.

Origin and evolution of ore-forming fluid for the Gaosongshan gold deposit, Lesser Xing’an Range:Evidence from fluid inclusions,H-O-S-Pb isotopes

Epithermal gold deposits are typical precious metal deposits related to volcanic and subvolcanic magmatism.Due to the lack of direct geological and petrographic evidences,the origin of the ore-forming fluid is deduced from the spatial diagenesis-mineralization relationship,chronological data,physicochemical characteristics of mineral fluid inclusions,mineral or rock elements and isotopic geochemical characteristics.By objectively examining this scientific problem via a geological field survey and petrographic analysis of the Gaosongshan epithermal gold deposit,we recently discovered and verified the following points:(1) Pyrite-bearing spherical quartz aggregates (PSQA) occur in the rhyolitic porphyry;(2) the mineralization is structurally dominated by WNW- and ENE-trending systems and occurs mostly in hydrothermal breccias and pyrite-quartz veins,and the ore types are mainly hematite-crusted quartz,hydrothermal breccia,massive pyrite-quartz,etc.;(3) the alteration types consist of prevalent silicification,sericitization,propylitization and carbonation,with local adularization and illitization.The ore minerals are mainly pyrite,primary hematite,native gold,and electrum,with lesser amounts of chalcopyrite,magnetite,sphalerite,and galena,indicating a characteristic epithermal low-sulfidation deposit.The ore-forming fluid may have been primarily derived from magmatic fluid exsolved from a crystallizing rhyolitic porphyry magma.Further zircon U-Pb geochronology,fluid inclusion,physicochemical and isotopic geochemical analyses revealed that (1) rhyolitic porphyry magmatism occurred at 104.6 ± 1.0 Ma,whereas the crystallization of the PSQA occurred at 100.8 ± 2.1 Ma;(2) the hydrothermal fluid of the pre-ore stage was an exsolved CO2-bearing H2O-NaCl magmatic fluid that produced inclusions mainly composed of pure vapor (PV),vapor-rich (WV) and liquid-rich (WL) inclusions with a small number of melt-(M) and solid-bearing (S) inclusions;mineralization-stage quartz contains WL and rare PV,WV and pure liquid (PL) inclusions characterized by the H2O-NaCl system with low formation temperatures and low salinities;(3) the characteristics of hydrogen,oxygen,sulfur,and lead isotopes and those of rare earth elements (REEs) provide insight into the affinity between PSQA and orebodies resulting from juvenile crust or enriched mantle.Combined with previous research on the mineralogenetic epoch (99.32 ± 0.01 Ma),we further confirm that the mineralization of the deposit occurred in the late Early Cretaceous,which coincides with the extension of the continental margin induced by subduction of the Pacific Plate beneath the Eurasian Plate.The formation of the ore deposit was proceeded by a series of magmatic and hydrothermal events,including melting of enriched juvenile crust,upwelling,the eruption and emplacement of the rhyolitic magma,the exsolution and accumulation of magmatic hydrothermal fluid,decompression,the cooling and immiscibility/boiling of the fluid,and mixing of the magmatic fluid with meteoric water,in association with water-rock interaction.