期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
聚天冬氨酸和钨酸钠复配对模拟水中白铜(B10)的缓蚀作用 被引量:5
1
作者 徐群杰 周国定 陆柱 《精细化工》 EI CAS CSCD 北大核心 2006年第3期290-293,共4页
采用交流阻抗法和极化曲线法,研究了两种环境友好型水处理药剂聚天冬氨酸和钨酸钠的单一配方及其复配对模拟水中白铜(B10)的缓蚀效果。研究表明,聚天冬氨酸和钨酸钠各自的单一配方对于B10均具有一定的缓蚀效果,其中聚天冬氨酸质量分数为... 采用交流阻抗法和极化曲线法,研究了两种环境友好型水处理药剂聚天冬氨酸和钨酸钠的单一配方及其复配对模拟水中白铜(B10)的缓蚀效果。研究表明,聚天冬氨酸和钨酸钠各自的单一配方对于B10均具有一定的缓蚀效果,其中聚天冬氨酸质量分数为9×10-6时,对B10的缓蚀效果最佳,缓蚀率为65.0%;钨酸钠质量分数为20×10-6时,缓蚀效果最佳,缓蚀率为53.8%。缓蚀剂总质量分数为20×10-6,聚天冬氨酸与钨酸钠的质量比为1∶6时,对B10的缓蚀效果最佳,缓蚀率为89.0%,且具有缓蚀协同效应。 展开更多
关键词 聚天冬氨酸 钨酸钠 白铜 缓蚀剂 交流阻抗
下载PDF
FeCuNbCrSiB非晶合金的晶化及磁导率与温度的关系 被引量:1
2
作者 赵玉华 何开元 +1 位作者 赵恒和 程力智 《功能材料》 EI CAS CSCD 北大核心 2002年第5期503-504,共2页
对Fe6 8Cu1 Nb3Cr8Si1 0 B1 0 非晶合金在 40 0~ 5 40℃等温退火 1h后的晶化行为及初始磁导率 μi 与温度的关系进行了研究。结果表明 :用Cr取代部分Fe和Si的Fe6 8Cu1 Nb3Cr8Si1 0 B1 0 非晶合金经适当温度退火后可获得具有bcc结构的α... 对Fe6 8Cu1 Nb3Cr8Si1 0 B1 0 非晶合金在 40 0~ 5 40℃等温退火 1h后的晶化行为及初始磁导率 μi 与温度的关系进行了研究。结果表明 :用Cr取代部分Fe和Si的Fe6 8Cu1 Nb3Cr8Si1 0 B1 0 非晶合金经适当温度退火后可获得具有bcc结构的α Fe(Si)纳米晶 ,合金的居里温度 (Tc <15 0℃ )远低于Finemet合金的Tc(约为 3 40℃ ) ;合金在淬态和 40 0℃退火后的 μi T曲线上出现Hop kinson峰 ,经 5 0 0℃和 5 40℃退火后其 μi T曲线上Hopkinson峰消失 ,曲线具有明显的长尾特征。 展开更多
关键词 FeCuNbCrSib非晶合金 晶化 磁导率 温度 软磁材料
下载PDF
Effect of Hydrodynamic Conditions on Corrosion Inhibition of Cu-Ni(90/10)Alloy in Seawater and Sulphide Containing Seawater Using 1,2,3-Benzotriazole 被引量:4
3
作者 B.V.Appa Rao K.Chaitanya Kumar 《Journal of Materials Science & Technology》 SCIE EI CAS CSCD 2014年第1期65-76,共12页
Electrochemical studies of the effect of hydrodynamic conditions on corrosion inhibition of Cu-Ni (90/10) alloy in synthetic seawater and sulphide containing synthetic seawater by 1,2,3-benzotriazole (BTAH) are pr... Electrochemical studies of the effect of hydrodynamic conditions on corrosion inhibition of Cu-Ni (90/10) alloy in synthetic seawater and sulphide containing synthetic seawater by 1,2,3-benzotriazole (BTAH) are presented. Impedance, potentiodynamic polarization and cyclic voltammetric (CV) studies are employed in the present investigation. The studies are carried out by using Cu-Ni (90/10) alloy rotating disc electrode at different rotation speeds and at different immersion periods. Reynolds numbers at each rotation speed infer that the flow of seawater is laminar. With increasing rotation speed of the electrode immersed in seawater without sulphide and BTAH, both the charge transfer resistance (Rot) and film resistance (Rf^lm) are increased. However, in the presence of sulphide ions and without BTAH, both the Rot and Rf,m are found to decrease with increasing rotation speed at identical immersion periods. Interestingly, when BTAH is added to seawater or seawater containing sulphide, both the Rot and Rf,m are increased to such a great extent that an inhibition efficiency of 99.99% is obtained. In the presence of BTAH, the phase angle Bode plots are more broadened and the maximum values of phase angle are increased to a value close to 90~ as the rotation speed is increased. The BTAH film is highly protective even under hydrodynamic condition also. Potentiodynamic polarization studies infer that BTAH functions as a mixed inhibitor under hydrodynamic conditions also. CV studies reveal that the protective BTAH film is stable even at anodic potentials of +850 mV vs Ag/AgCI. 展开更多
关键词 cu-ni (90/10 alloy Rotating disc electrode Seawater Corrosion inhibition Electrochemical studies 1 2 3-benzotriazole
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部