Five Cu-ZSM-5 catalysts were obtained by treating Na-ZSM-5(Si/Al ratio = 15) with aqueous solutions of different Cu precursors(CuCl_2, Cu(NO_3)_2, CuSO_4, Cu(CH_3COO)_2, and ammoniacal copper(II) complex ion). After b...Five Cu-ZSM-5 catalysts were obtained by treating Na-ZSM-5(Si/Al ratio = 15) with aqueous solutions of different Cu precursors(CuCl_2, Cu(NO_3)_2, CuSO_4, Cu(CH_3COO)_2, and ammoniacal copper(II) complex ion). After being pretreated in flowing He at 500 ℃ to form active Cu+, these catalysts exhibited quite different activities in catalytic decomposition of N_2O. CZM-AC(II)(prepared by ammoniacal copper(Ⅱ) complex ion) with 9.4 wt% Cu content was the most active among these Cu-ZSM-5 catalysts, achieving almost complete N_2O conversion at 400 ℃.CZM-CA(prepared using Cu(CH_3COO)_2 as the Cu precursor) with 2.8 wt% Cu content was the second most active catalyst among these Cu-ZSM-5 catalysts, achieving almost complete N_2O conversion at 425 ℃. CZM-CC, CZMCN, and CZM-CS prepared by using Cu Cl_2, Cu(NO_3)_2, or CuSO_4 as the Cu precursor with similar Cu contents(≈ 1.7 wt%) were the least active among these Cu-ZSM-5 catalysts, achieving ca. 90% N_2O conversion at 500 ℃.XRD, ICP, SEM, TEM, EDX-mapping, and CO-IR experiments were conducted to characterize relevant samples.The superior activity of CZM-AC(Ⅱ) can be attributed to the high contents of total Cu+and dimeric Cu+among these samples. The influence of co-fed O_2 or H_2O on the catalytic performance of typical samples was also studied.展开更多
This study was aimed to investigate the effects of hydrothermal aging, propene and SO<sub>2</sub> poisoning on the ammonia-selective catalytic reduction (NH<sub>3</sub>-SCR) performance of both...This study was aimed to investigate the effects of hydrothermal aging, propene and SO<sub>2</sub> poisoning on the ammonia-selective catalytic reduction (NH<sub>3</sub>-SCR) performance of both Cu-SAPO-34 and Cu-ZSM-5. The catalytic activities of fresh, aged and poisoned samples were tested in ammonia-selective catalytic reduction (NH<sub>3</sub>-SCR) of NO<sub>x</sub> conditions. The XRD, TG and N<sub>2</sub>-desorption results showed that the structures of the Cu-SAPO-34 and Cu-ZSM-5 remained intact after 750˚C hydrothermally aged, SO<sub>2</sub> and propene poisoned. After hydrothermal aging at 750˚C for 12 h, the NO reduction performance of Cu-ZSM-5 was significantly reduced at lower temperatures, while that of Cu-SAPO-34 was less affected. Moreover, Cu-SAPO-34 catalyst showed high NO conversion with SO<sub>2</sub> or propene compared to Cu-ZSM-5. However, Cu-ZSM-5 showed a larger drop in catalytic activity with SO<sub>2</sub> or propene compared to Cu-SAPO-34 catalyst. The H<sub>2</sub>-TPR results showed that Cu<sup>2 </sup> ions could be reduced to Cu<sup> </sup> and Cu<sup>0</sup> for Cu-ZSM-5, while no significant transformation of copper species was observed for Cu-SAPO-34. Meanwhile, the UV-vis DRS results showed that CuO species were formed in Cu-ZSM-5, while little changes were observed for the Cu-SAPO-34. Cu-SAPO-34 showed high sulfur and hydrocarbon poison resistance compared to Cu-ZSM-5. In summary, Cu-SAPO-34 with small-pore zeolite showed higher hydrothermal stability and better hydrocarbon and sulfur poison resistant than Cu-ZSM-5 with medium-pore.展开更多
Heavy oil is characterized by high viscosity.High viscosity makes it challenging to recover and transport.HZSM-5,MoO_(3)/HZSM-5,ZrO_(2)/HZSM-5 and MoO_(3)–ZrO_(2)/HZSM-5 catalysts were developed to promote in situ de...Heavy oil is characterized by high viscosity.High viscosity makes it challenging to recover and transport.HZSM-5,MoO_(3)/HZSM-5,ZrO_(2)/HZSM-5 and MoO_(3)–ZrO_(2)/HZSM-5 catalysts were developed to promote in situ desulfurization and viscosity reduction of heavy oil.The physical and chemical properties of catalysts were characterized by XPS,XRD,TEM,NH3-TPD,etc.The effects of temperature,catalyst type and addition amount on viscosity and composition of heavy oil were evaluated.The results showed that the presence of MoO_(3)–ZrO_(2)/HZSM-5 nanoparticles during aquathermolysis could improve the oil quality by reducing the heavy fractions.It reduced viscosity by 82.56%after the reaction at 280℃ and catalyst addition of 1 wt%.The contents of resins and asphaltic in the oil samples were 5.69%lower than that in the crude oil.Sulfur content decreased from 1.45%to 1.03%.The concentration of H2S produced by the reaction was 2225 ppm.The contents of sulfur-containing functional groups sulfoxide and sulfone sulfur in the oil samples decreased by 19.92%after the catalytic reaction.The content of stable thiophene sulfur increased by 5.71%.This study provided a basis for understanding the mechanism of heavy oil desulfurization and viscosity reduction.展开更多
Compared to reforming reactions using hydrocarbons,ethanol steam reforming(ESR)is a sustainable alternative for hydrogen(H_(2))production since ethanol can be produced sustainably using biomass.This work explores the ...Compared to reforming reactions using hydrocarbons,ethanol steam reforming(ESR)is a sustainable alternative for hydrogen(H_(2))production since ethanol can be produced sustainably using biomass.This work explores the catalyst design strategies for preparing the Ni supported on ZSM-5 zeolite catalysts to promote ESR.Specifically,two-dimensional ZSM-5 nanosheet and conventional ZSM-5 crystal were used as the catalyst carriers and two synthesis strategies,i.e.,in situ encapsulation and wet impregnation method,were employed to prepare the catalysts.Based on the comparative characterization of the catalysts and comparative catalytic assessments,it was found that the combination of the in situ encapsulation synthesis and the ZSM-5 nanosheet carrier was the effective strategy to develop catalysts for promoting H_(2) production via ESR due to the improved mass transfer(through the 2-D structure of ZSM-5 nanosheet)and formation of confined small Ni nanoparticles(resulted via the in situ encapsulation synthesis).In addition,the resulting ZSM-5 nanosheet supported Ni catalyst also showed high Ni dispersion and high accessibility to Ni sites by the reactants,being able to improve the activity and stability of catalysts and suppress metal sintering and coking during ESR at high reaction temperatures.Thus,the Ni supported on ZSM-5 nanosheet catalyst prepared by encapsulation showed the stable performance with~88% ethanol conversion and~65% H_(2) yield achieved during a 48-h longevity test at 550-C.展开更多
N,N-Dimethylformamide(DMF),a nitrogen-containing volatile organic compound(NVOC)with high emissions from the spray industry,has attracted increasing attention.In this study,Cu-ZSM-5 catalysts with different CuO partic...N,N-Dimethylformamide(DMF),a nitrogen-containing volatile organic compound(NVOC)with high emissions from the spray industry,has attracted increasing attention.In this study,Cu-ZSM-5 catalysts with different CuO particle sizes of 3,6,9 and 12 nm were synthesized and tested for DMF selective catalytic oxidation.The crystal structure and physicochemical properties of the catalyst were studied by various characterization methods.The catalytic activity increases with increasing CuO particle size,and complete conversion can be achieved at 300-350℃.The Cu-12 nm catalyst has the highest catalytic activity and can achieve complete conversion at 300℃.The Cu-6 nm sample has the highest N_(2)selectivity at lower temperatures,reaching 95%at 300℃.The activity of the catalysts is determined by the surface CuO cluster species,the bulk CuO species and the chemisorbed surface oxygen species.The high N_(2)selectivity of the catalyst is attributed to the ratio of isolated Cu2+and bulk CuO species,and weak acidity is beneficial to the formation of N_(2).The results in this work will provide a new design of NVOC catalytic oxidation catalysts.展开更多
基金Supported by the National Natural Science Foundation of China(Grant No.21477022)
文摘Five Cu-ZSM-5 catalysts were obtained by treating Na-ZSM-5(Si/Al ratio = 15) with aqueous solutions of different Cu precursors(CuCl_2, Cu(NO_3)_2, CuSO_4, Cu(CH_3COO)_2, and ammoniacal copper(II) complex ion). After being pretreated in flowing He at 500 ℃ to form active Cu+, these catalysts exhibited quite different activities in catalytic decomposition of N_2O. CZM-AC(II)(prepared by ammoniacal copper(Ⅱ) complex ion) with 9.4 wt% Cu content was the most active among these Cu-ZSM-5 catalysts, achieving almost complete N_2O conversion at 400 ℃.CZM-CA(prepared using Cu(CH_3COO)_2 as the Cu precursor) with 2.8 wt% Cu content was the second most active catalyst among these Cu-ZSM-5 catalysts, achieving almost complete N_2O conversion at 425 ℃. CZM-CC, CZMCN, and CZM-CS prepared by using Cu Cl_2, Cu(NO_3)_2, or CuSO_4 as the Cu precursor with similar Cu contents(≈ 1.7 wt%) were the least active among these Cu-ZSM-5 catalysts, achieving ca. 90% N_2O conversion at 500 ℃.XRD, ICP, SEM, TEM, EDX-mapping, and CO-IR experiments were conducted to characterize relevant samples.The superior activity of CZM-AC(Ⅱ) can be attributed to the high contents of total Cu+and dimeric Cu+among these samples. The influence of co-fed O_2 or H_2O on the catalytic performance of typical samples was also studied.
文摘This study was aimed to investigate the effects of hydrothermal aging, propene and SO<sub>2</sub> poisoning on the ammonia-selective catalytic reduction (NH<sub>3</sub>-SCR) performance of both Cu-SAPO-34 and Cu-ZSM-5. The catalytic activities of fresh, aged and poisoned samples were tested in ammonia-selective catalytic reduction (NH<sub>3</sub>-SCR) of NO<sub>x</sub> conditions. The XRD, TG and N<sub>2</sub>-desorption results showed that the structures of the Cu-SAPO-34 and Cu-ZSM-5 remained intact after 750˚C hydrothermally aged, SO<sub>2</sub> and propene poisoned. After hydrothermal aging at 750˚C for 12 h, the NO reduction performance of Cu-ZSM-5 was significantly reduced at lower temperatures, while that of Cu-SAPO-34 was less affected. Moreover, Cu-SAPO-34 catalyst showed high NO conversion with SO<sub>2</sub> or propene compared to Cu-ZSM-5. However, Cu-ZSM-5 showed a larger drop in catalytic activity with SO<sub>2</sub> or propene compared to Cu-SAPO-34 catalyst. The H<sub>2</sub>-TPR results showed that Cu<sup>2 </sup> ions could be reduced to Cu<sup> </sup> and Cu<sup>0</sup> for Cu-ZSM-5, while no significant transformation of copper species was observed for Cu-SAPO-34. Meanwhile, the UV-vis DRS results showed that CuO species were formed in Cu-ZSM-5, while little changes were observed for the Cu-SAPO-34. Cu-SAPO-34 showed high sulfur and hydrocarbon poison resistance compared to Cu-ZSM-5. In summary, Cu-SAPO-34 with small-pore zeolite showed higher hydrothermal stability and better hydrocarbon and sulfur poison resistant than Cu-ZSM-5 with medium-pore.
基金support provided by the National Science and Technology Major Project of the Ministry of Science and Technology of China(2016ZX05012-002-005)Shandong Provincial Natural Science Foundation(Grant no.:ZR2021QE051)+1 种基金National Natural Science Foundation of China(Grant no.:52206291)the Fundamental Research Funds for the Central Universities(Grant no.:22CX06030A).
文摘Heavy oil is characterized by high viscosity.High viscosity makes it challenging to recover and transport.HZSM-5,MoO_(3)/HZSM-5,ZrO_(2)/HZSM-5 and MoO_(3)–ZrO_(2)/HZSM-5 catalysts were developed to promote in situ desulfurization and viscosity reduction of heavy oil.The physical and chemical properties of catalysts were characterized by XPS,XRD,TEM,NH3-TPD,etc.The effects of temperature,catalyst type and addition amount on viscosity and composition of heavy oil were evaluated.The results showed that the presence of MoO_(3)–ZrO_(2)/HZSM-5 nanoparticles during aquathermolysis could improve the oil quality by reducing the heavy fractions.It reduced viscosity by 82.56%after the reaction at 280℃ and catalyst addition of 1 wt%.The contents of resins and asphaltic in the oil samples were 5.69%lower than that in the crude oil.Sulfur content decreased from 1.45%to 1.03%.The concentration of H2S produced by the reaction was 2225 ppm.The contents of sulfur-containing functional groups sulfoxide and sulfone sulfur in the oil samples decreased by 19.92%after the catalytic reaction.The content of stable thiophene sulfur increased by 5.71%.This study provided a basis for understanding the mechanism of heavy oil desulfurization and viscosity reduction.
基金funding from the European Union's Horizon 2020 Research and Innovation Program(872102)P.S.thanks the Science Achievement Scholarship of Thailand(SAST)for her research secondment at The University of Manchester.Y.J.thanks the National Natural Science Foundation of China(22378407)for funding.
文摘Compared to reforming reactions using hydrocarbons,ethanol steam reforming(ESR)is a sustainable alternative for hydrogen(H_(2))production since ethanol can be produced sustainably using biomass.This work explores the catalyst design strategies for preparing the Ni supported on ZSM-5 zeolite catalysts to promote ESR.Specifically,two-dimensional ZSM-5 nanosheet and conventional ZSM-5 crystal were used as the catalyst carriers and two synthesis strategies,i.e.,in situ encapsulation and wet impregnation method,were employed to prepare the catalysts.Based on the comparative characterization of the catalysts and comparative catalytic assessments,it was found that the combination of the in situ encapsulation synthesis and the ZSM-5 nanosheet carrier was the effective strategy to develop catalysts for promoting H_(2) production via ESR due to the improved mass transfer(through the 2-D structure of ZSM-5 nanosheet)and formation of confined small Ni nanoparticles(resulted via the in situ encapsulation synthesis).In addition,the resulting ZSM-5 nanosheet supported Ni catalyst also showed high Ni dispersion and high accessibility to Ni sites by the reactants,being able to improve the activity and stability of catalysts and suppress metal sintering and coking during ESR at high reaction temperatures.Thus,the Ni supported on ZSM-5 nanosheet catalyst prepared by encapsulation showed the stable performance with~88% ethanol conversion and~65% H_(2) yield achieved during a 48-h longevity test at 550-C.
基金supported by the R&D Program of Bejjing Municipal Education Commission(China)(No.KJZD20191443001)Bejjing Municipal Science and Technology Commission(China)(No.Z181100000118003)+3 种基金the Key R&D Program of Shanxi Province(China)(No.201903D311006)the Doctoral research start up fund project of Taiyuan University of science and technology(China)(Nos.20202053 and 20192039)Research Support for Outstanding Doctors in Shanxi(China)(Nos.20192043 and 20212060)Scientific and Techno-logical Innovation Programs of Higher Education Instiutions in Shanxi(China)(Nos.2021L311 and 2019L0030).
文摘N,N-Dimethylformamide(DMF),a nitrogen-containing volatile organic compound(NVOC)with high emissions from the spray industry,has attracted increasing attention.In this study,Cu-ZSM-5 catalysts with different CuO particle sizes of 3,6,9 and 12 nm were synthesized and tested for DMF selective catalytic oxidation.The crystal structure and physicochemical properties of the catalyst were studied by various characterization methods.The catalytic activity increases with increasing CuO particle size,and complete conversion can be achieved at 300-350℃.The Cu-12 nm catalyst has the highest catalytic activity and can achieve complete conversion at 300℃.The Cu-6 nm sample has the highest N_(2)selectivity at lower temperatures,reaching 95%at 300℃.The activity of the catalysts is determined by the surface CuO cluster species,the bulk CuO species and the chemisorbed surface oxygen species.The high N_(2)selectivity of the catalyst is attributed to the ratio of isolated Cu2+and bulk CuO species,and weak acidity is beneficial to the formation of N_(2).The results in this work will provide a new design of NVOC catalytic oxidation catalysts.
