Cu2ZnSnS4 (CZTS) thin films were successfully prepared by sulfurization of ion bean sputtered precursors on soda-lime glass substrate. The single phase of stannite-type structure CZTS films were obtained as revealed i...Cu2ZnSnS4 (CZTS) thin films were successfully prepared by sulfurization of ion bean sputtered precursors on soda-lime glass substrate. The single phase of stannite-type structure CZTS films were obtained as revealed in EDS and XRD analysis when the ratios of the constituents of CZTS thin films are close to stoichiometric by optimizing the conditions of precursor preparation and sulfurization. A low sheet resistivity as about 0.156 Ω·cm and a high absorption coefficient as 1×104 cm-1 were achieved in this method by Hall effect measurements and UV-VIS spectrophotometer. The optical band-gap energy of the CZTS sample is about 1.51 eV, which is very close to the optimum value for a solar-cell absorber.展开更多
The Cu2ZnSnS4 thin film was prepared by a facile solution method without vacuum environment and toxic substance. The formation mechanism of the film was studied by transmission electron microscopy (TEM), X-ray diffrac...The Cu2ZnSnS4 thin film was prepared by a facile solution method without vacuum environment and toxic substance. The formation mechanism of the film was studied by transmission electron microscopy (TEM), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), and Raman scattering measurements. Through cyclic voltammetry and photo-electricity tests, the electrocatalytic activity of the prepared film as the counter electrode of dye-sensitizedsolar cell was also studied. The results show that the mixed precursor solution mainly consists of Cu2SnS3 nanoparticles and Zn ions.After 550 °C annealing process on the precursor film prepared from the mixed solution, Cu2ZnSnS4 thin film is obtained. Besides, itis found that the prepared Cu2ZnSnS4 thin film has the electrocatalytic activity toward the redox reaction of I3?/I? and the dye-sensitized solar cell with the prepared Cu2ZnSnS4 thin film as the counter electrode achieves the efficiency of 1.09%.展开更多
The low temperature phase transformation in the Cu_2ZnSnS_4（CZTS） films was investigated by laser annealing and low temperature thermal annealing.The Raman measurements show that a-high-power laser annealing could c...The low temperature phase transformation in the Cu_2ZnSnS_4（CZTS） films was investigated by laser annealing and low temperature thermal annealing.The Raman measurements show that a-high-power laser annealing could cause a red shift of the Raman scattering peaks of the kesterite（KS） structure and promotes the formation of the partially disordered kesterite（PD-KS） structure in the CZTS films,and the low-temperature thermal annealing only shifts the Raman scattering peak of KS phase by several wavenumber to low frequency and the broads Raman peaks in the low frequency region.Moreover,the above two processes were reversible.The Raman analyses of the CZTS samples prepared under different process show that the PD-KS structure tends to be found at low temperatures and low sulfur vapor pressures.Our results reveal that the control of the phase structure in CZTS films is feasible by adjusting the preparation process of the films.展开更多
Zn/Sn/Cu （CZT） stacks were prepared by RF magnetron sputtering. The stacks were pretreated at different tem- peratures （200℃, 300 ℃, 350 ℃, and 400 ℃） for 0.5 h and then followed by sulfurization at 500℃ for ...Zn/Sn/Cu （CZT） stacks were prepared by RF magnetron sputtering. The stacks were pretreated at different tem- peratures （200℃, 300 ℃, 350 ℃, and 400 ℃） for 0.5 h and then followed by sulfurization at 500℃ for 2 h. Then, the structures, morphologies, and optical properties of the as-obtained Cu2ZnSnS4 （CZTS） films were studied by x-ray diffraction （XRD）, Raman spectroscopy, UV-Vis-NIR, scanning electron microscope （SEM）, and energy-dispersive x-ray spectroscopy （EDX）. The XRD and Raman spectroscopy results indicated that the sample pretreated at 350℃ had no secondary phase and good crystallization. At the same time, SEM confirmed that it had large and dense grains. According to the UV-Vis-NIR spectrum, the sample had an absorption coefficient larger than 10^4 cm-1 in the visible light range and a band gap close to 1.5 eV.展开更多
采用磁控溅射法,先在镀钼的钠钙玻璃衬底上共溅射Cu、Sn金属层后,然后在顶部溅射一层Zn S,制备出Cu_2ZnSnS_4(CZTS)薄膜的预制层。对预制层进行低温合金,然后以硫粉作为硫源在石英管中进行高温硫化,得到表面平整但晶粒较小的CZTS薄膜。...采用磁控溅射法,先在镀钼的钠钙玻璃衬底上共溅射Cu、Sn金属层后,然后在顶部溅射一层Zn S,制备出Cu_2ZnSnS_4(CZTS)薄膜的预制层。对预制层进行低温合金,然后以硫粉作为硫源在石英管中进行高温硫化,得到表面平整但晶粒较小的CZTS薄膜。通过X射线衍射仪(XRD)、扫描电镜(SEM)及能谱仪(EDS)分别对薄膜的晶体结构、表面形貌和薄膜组分进行分析表征;并用拉曼光谱表征了CZTS相的纯度。最后用所得到的CZTS薄膜制备了太阳电池,其开路电压:Voc=442 m V,短路电流密度:Jsc=5.08 m A/cm^2,光电转换效率达到0.62%。展开更多
基金This work was financially supported by the National Natural Science Foundation (No.10574106), the Science & Technology Plan of Guangdong Province (No.2003C105005) and the Scientific Research Foundation for the Returned Overseas Chinese Scholars of Chinese State Education Ministry (No.(2004)176).
文摘Cu2ZnSnS4 (CZTS) thin films were successfully prepared by sulfurization of ion bean sputtered precursors on soda-lime glass substrate. The single phase of stannite-type structure CZTS films were obtained as revealed in EDS and XRD analysis when the ratios of the constituents of CZTS thin films are close to stoichiometric by optimizing the conditions of precursor preparation and sulfurization. A low sheet resistivity as about 0.156 Ω·cm and a high absorption coefficient as 1×104 cm-1 were achieved in this method by Hall effect measurements and UV-VIS spectrophotometer. The optical band-gap energy of the CZTS sample is about 1.51 eV, which is very close to the optimum value for a solar-cell absorber.
基金Projects(51204214,51272292,51222403)supported by the National Natural Science Foundation of China
文摘The Cu2ZnSnS4 thin film was prepared by a facile solution method without vacuum environment and toxic substance. The formation mechanism of the film was studied by transmission electron microscopy (TEM), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), and Raman scattering measurements. Through cyclic voltammetry and photo-electricity tests, the electrocatalytic activity of the prepared film as the counter electrode of dye-sensitizedsolar cell was also studied. The results show that the mixed precursor solution mainly consists of Cu2SnS3 nanoparticles and Zn ions.After 550 °C annealing process on the precursor film prepared from the mixed solution, Cu2ZnSnS4 thin film is obtained. Besides, itis found that the prepared Cu2ZnSnS4 thin film has the electrocatalytic activity toward the redox reaction of I3?/I? and the dye-sensitized solar cell with the prepared Cu2ZnSnS4 thin film as the counter electrode achieves the efficiency of 1.09%.
基金Project supported by the Natural Science Foundation for Youth Fund of Hebei Province,China(Grant No.A2016201087)the Specialized Research Fund for the Doctoral Program of Higher Education of China(Grant No.20131301120003)the National Natural Science Foundation of China(Grant Nos.11504078and 61504054)
文摘The low temperature phase transformation in the Cu_2ZnSnS_4（CZTS） films was investigated by laser annealing and low temperature thermal annealing.The Raman measurements show that a-high-power laser annealing could cause a red shift of the Raman scattering peaks of the kesterite（KS） structure and promotes the formation of the partially disordered kesterite（PD-KS） structure in the CZTS films,and the low-temperature thermal annealing only shifts the Raman scattering peak of KS phase by several wavenumber to low frequency and the broads Raman peaks in the low frequency region.Moreover,the above two processes were reversible.The Raman analyses of the CZTS samples prepared under different process show that the PD-KS structure tends to be found at low temperatures and low sulfur vapor pressures.Our results reveal that the control of the phase structure in CZTS films is feasible by adjusting the preparation process of the films.
基金supported by Funding for Outstanding Doctoral Dissertation in NUAA,China(Grant No.BCXJ13-12)the Jiangsu Innovation Program for Graduate Education,China(Grant No.CXLX13 150)+2 种基金the Fundamental Research Funds for the Central Universities,China(Grant No.61176062)the Science and Technology Supporting Project of Jiangsu Province,China(Grant No.BE2012103)the Priority Academic Program Development of Jiangsu Higher Education Institutions,China
文摘Zn/Sn/Cu （CZT） stacks were prepared by RF magnetron sputtering. The stacks were pretreated at different tem- peratures （200℃, 300 ℃, 350 ℃, and 400 ℃） for 0.5 h and then followed by sulfurization at 500℃ for 2 h. Then, the structures, morphologies, and optical properties of the as-obtained Cu2ZnSnS4 （CZTS） films were studied by x-ray diffraction （XRD）, Raman spectroscopy, UV-Vis-NIR, scanning electron microscope （SEM）, and energy-dispersive x-ray spectroscopy （EDX）. The XRD and Raman spectroscopy results indicated that the sample pretreated at 350℃ had no secondary phase and good crystallization. At the same time, SEM confirmed that it had large and dense grains. According to the UV-Vis-NIR spectrum, the sample had an absorption coefficient larger than 10^4 cm-1 in the visible light range and a band gap close to 1.5 eV.
文摘利用磁控溅射法将Cu/Sn/Zn S前驱体沉积在钙钠玻璃基片上,再通过硫化该前驱体制备Cu2ZnSnS4薄膜。利用X射线衍射仪、拉曼光谱仪、扫描电子显微镜、能谱仪、霍尔效应测量系统和紫外可见分光光度计研究了Cu2ZnSnS4薄膜的微观结构、表面形貌、化学成分、电学和光学性能。结果表明,CZTS薄膜的微观结构依赖于硫化温度和时间。在480℃硫化3 h的薄膜为沿(112)晶面择优取向生长的纯相CZTS薄膜,该薄膜的禁带宽度是1.51 e V,其电阻率和载流子浓度分别为0.39Ω·cm和4.07×1017cm-3。
文摘采用磁控溅射法,先在镀钼的钠钙玻璃衬底上共溅射Cu、Sn金属层后,然后在顶部溅射一层Zn S,制备出Cu_2ZnSnS_4(CZTS)薄膜的预制层。对预制层进行低温合金,然后以硫粉作为硫源在石英管中进行高温硫化,得到表面平整但晶粒较小的CZTS薄膜。通过X射线衍射仪(XRD)、扫描电镜(SEM)及能谱仪(EDS)分别对薄膜的晶体结构、表面形貌和薄膜组分进行分析表征;并用拉曼光谱表征了CZTS相的纯度。最后用所得到的CZTS薄膜制备了太阳电池,其开路电压:Voc=442 m V,短路电流密度:Jsc=5.08 m A/cm^2,光电转换效率达到0.62%。
