液态电解质锂离子电池因其潜在的安全性问题,发展新的固态电解质锂离子电池是目前所研究的热点。磷酸铝钛锂(Li_(1.5)Al_(0.5)Ti_(1.5)(PO_(4))_(3),LATP)是一种NASICON型陶瓷材料,由于其空气稳定性和较好的Li^(+)导电性而备受关注。然...液态电解质锂离子电池因其潜在的安全性问题,发展新的固态电解质锂离子电池是目前所研究的热点。磷酸铝钛锂(Li_(1.5)Al_(0.5)Ti_(1.5)(PO_(4))_(3),LATP)是一种NASICON型陶瓷材料,由于其空气稳定性和较好的Li^(+)导电性而备受关注。然而,为了达到良好的离子导电性并降低晶界阻抗,LATP需要950℃以上的高温来实现致密化,这对于大规模应用来说耗时且昂贵。本文使用简单的溶液浇铸法,通过将LATP嵌入共聚物PVDF-HFP(聚偏氟乙烯-六氟丙烯)基体,合成新的复合固态电解质膜。在此基础上,以磷酸铁锂(LiFePO_(4))为正极,使用PVDF-HFP/LATP复合固态电解质膜进行电池组装。在室温下,利用X射线衍射仪(X-ray diffractometer,XRD)、扫描电子显微镜(scanning electron microscope,SEM)对不同质量比的固态电解质膜进行物理特性研究,并进行相关电化学测试。结果表明,PVDF-HFP/LATP质量比为5∶1的复合固态电解质膜,其LATP的NASICON型晶体结构得到了很好的保持;制备的聚合物固态电解质膜具有阻燃性;组装的半电池在常温条件下锂离子迁移数达到0.70。全电池在20次充放电循环下,放电比容量保持率为85%。展开更多
Cobalt-free cathode materials are attractive for their high capacity and low cost,yet they still encounter issues with structural and surface instability.AlPO_(4),in particular,has garnered attention as an effective s...Cobalt-free cathode materials are attractive for their high capacity and low cost,yet they still encounter issues with structural and surface instability.AlPO_(4),in particular,has garnered attention as an effective stabilizer for bulk and surface.However,the impact of interfacial reactions and elemental interdiffusion between AlPO_(4) and LiNi_(0.95)Mn_(0.05)O_(2) upon sintering on the bulk and surface remains elusive.In this study,we demonstrate that during the heat treatment process,AlPO_(4) decomposes,resulting in Al doping into the bulk of the cathode through elemental interdiffusion.Simultaneously,PO_(4)^(3-)reacts with the surface Li of material to form a Li_3PO_(4) coating,inducing lithium deficiency,thereby increasing Li/Ni mixing.The suitable Li/Ni mixing,previously overlooked in AlPO_(4) modification,plays a pivotal role in stabilizing the bulk and surface,exceeding the synergy of Al doping and Li_3PO_(4) coating.The presence of Ni^(2+)ions in the lithium layers contributes to the stabilization of the delithiated structure via a structural pillar effect.Moreover,suitable Li/Ni mixing can stabilize the lattice oxygen and electrode-electrolyte interface by increasing oxygen removal energy and reducing the overlap between the Ni^(3+/4+)e_g and O^(2-)2p orbitals.These findings offer new perspectives for the design of stable cobalt-free cathode materials.展开更多
文摘液态电解质锂离子电池因其潜在的安全性问题,发展新的固态电解质锂离子电池是目前所研究的热点。磷酸铝钛锂(Li_(1.5)Al_(0.5)Ti_(1.5)(PO_(4))_(3),LATP)是一种NASICON型陶瓷材料,由于其空气稳定性和较好的Li^(+)导电性而备受关注。然而,为了达到良好的离子导电性并降低晶界阻抗,LATP需要950℃以上的高温来实现致密化,这对于大规模应用来说耗时且昂贵。本文使用简单的溶液浇铸法,通过将LATP嵌入共聚物PVDF-HFP(聚偏氟乙烯-六氟丙烯)基体,合成新的复合固态电解质膜。在此基础上,以磷酸铁锂(LiFePO_(4))为正极,使用PVDF-HFP/LATP复合固态电解质膜进行电池组装。在室温下,利用X射线衍射仪(X-ray diffractometer,XRD)、扫描电子显微镜(scanning electron microscope,SEM)对不同质量比的固态电解质膜进行物理特性研究,并进行相关电化学测试。结果表明,PVDF-HFP/LATP质量比为5∶1的复合固态电解质膜,其LATP的NASICON型晶体结构得到了很好的保持;制备的聚合物固态电解质膜具有阻燃性;组装的半电池在常温条件下锂离子迁移数达到0.70。全电池在20次充放电循环下,放电比容量保持率为85%。
基金financial support from the Natural Science Foundation of Shandong Province (ZR2022QB140)the PhD Initiation Program of Liaocheng University (318052138)the Natural Science Foundation of Shandong Province (ZR2023MB002 and ZR2021MB114)。
文摘Cobalt-free cathode materials are attractive for their high capacity and low cost,yet they still encounter issues with structural and surface instability.AlPO_(4),in particular,has garnered attention as an effective stabilizer for bulk and surface.However,the impact of interfacial reactions and elemental interdiffusion between AlPO_(4) and LiNi_(0.95)Mn_(0.05)O_(2) upon sintering on the bulk and surface remains elusive.In this study,we demonstrate that during the heat treatment process,AlPO_(4) decomposes,resulting in Al doping into the bulk of the cathode through elemental interdiffusion.Simultaneously,PO_(4)^(3-)reacts with the surface Li of material to form a Li_3PO_(4) coating,inducing lithium deficiency,thereby increasing Li/Ni mixing.The suitable Li/Ni mixing,previously overlooked in AlPO_(4) modification,plays a pivotal role in stabilizing the bulk and surface,exceeding the synergy of Al doping and Li_3PO_(4) coating.The presence of Ni^(2+)ions in the lithium layers contributes to the stabilization of the delithiated structure via a structural pillar effect.Moreover,suitable Li/Ni mixing can stabilize the lattice oxygen and electrode-electrolyte interface by increasing oxygen removal energy and reducing the overlap between the Ni^(3+/4+)e_g and O^(2-)2p orbitals.These findings offer new perspectives for the design of stable cobalt-free cathode materials.
