Wrinkling and Growth Mechanism of CuO Nanowires in Thermal Oxidation of Copper Foil

We report a systematic study on wrinkling and CuO nanowires （NWs） growth in the thermal oxidation of copper foil. Copper foils with thickness of 0.5 mm were thermally oxidized in air at 500℃ for 0.5-10 h. It is found that all the samples have wrinkles and the size of the wrinkles increases with the oxidation time increasing. CuO NWs can grow on both the sidehill and hilltop of wrinkle. The CuO NWs on sidehill are longer and denser than those on hilltop. The growth direction of the CuO NWs on sidehill is not vertical to the substrate but vertical to their growth surfaces. The process of wrinkling and CuO NWs growth can be divided into three stages： undulating, voiding, and cracking. The CuO NWs on both sidehill and hilltop grow at the undulating stage. However, only the CuO NWs on sidehill grow and those on hilltop stop growing at the voiding and cracking stages because of the void in hilltop. The local electric field in a wrinkle at undulating stage was calculated, and it is found that the difference of local electric field strengths between hilltop and sidehill is small, which indicates that the predominant driving force for the diffusion of Cu ion during CuO NWs growth is internal stress.

Porous CuO nanowires as the anode of rechargeable Na-ion batteries

We report the preparation of porous CuO nanowires that are composed of nanoparticles （-50 nm） via a simple decomposition of a Cu（OH）2 precursor and their application as the anode materials of rechargeable Na-ion batteries. The as-prepared porous CuO nanowires exhibit a Brunauer-Emmett-Teller （BET） surface area of 13.05 m^2.g^-1, which is six times larger than that of bulk CuO （2.16 m^2.g^-1）. The anode of porous CuO nanowires showed discharge capacities of 640 mA.h.g^-1 in the first cycle and 303 mA.h.g^-1 after 50 cycles at 50 mA.g^-1 The high capacity is attributed to porous nanostructure which facilitates fast Na-intercalation kinetics. The mechanism of electrochemical Na-storage based on conversion reactions has been studied through cyclic voltammetry, X-ray diffraction （XRD）, Raman spectroscopy, and high resolution transmission electron microscopy （HRTEM）. It is demonstrated that in the discharge process, Na＋ions first insert into CuO to form a CuⅡ1-x CuⅠ x O1-x/2solid and a Na2O matrix then CuⅡ1-xCu Ⅰ xO1-x/2 reacts with Na＋ to produce Cu2O, and finally Cu2O decompose into Cu nanoparticles enclosed in a Na2O matrix. During the charge process, Cu nanopartides are first oxidized to generate Cu2O and then converted back to CuO. This result contributes to the design and mechanistic analysis of high-performance anodes for rechargeable Na-ion batteries.

Large-scale assembly of Cu/CuO nanowires for nano-electronic device fabrication

To improve the efficiency of nano-electronic device fabrication, a new method named floating electrical potential assembly is proposed to realize large-scale assembly of Cu/CuO nanowires, The simulation of floating electrical potential distribution on the micro-electrode chip is performed by COMSOL software, and the simulation result shows that the coupled electrical poten- tial on the floating drain electrodes is very close to the original electrical potential applied on the gate electrode, whicb means that the method can provide di-electrophoresis （DEP） force for all the electrode pairs at one time, thus realizing large-scale as- sembly at one time. With Cu/CuO nanowires well dispersed and micro-electrode chip fabrication, nanowires assembly experiments are performed and the experimental results show that Cu/CuO nanowires are assembled at hundreds of micro-electrodes pairs at one time, and the success rate of nanowires assembly also reaches 90%.

Solution-flame hybrid synthesis of defect-enriched mesoporous CuO_(x) nanowires for enhanced electrochemical nitrate-to-ammonia production

Electrochemical nitrate reduction(ENR)is an economical and eco-friendly method for converting industrial wastewater into valuable ammonia under atmospheric conditions.The main challenge lies in designing and developing highly durable ENR electrocatalysts.This study introduces defect-rich mesoporous CuO_(x) nanowires electrocatalyst synthesized using a novel solution-flame(sol-flame)hybrid method to control mesoporosity and introduce surface defects,thereby enhancing the electrochemical nitrate-toammonia production performance.We found surface defects(oxygen vacancies and Cu^(+))and unique mesoporous nanowire structure composed of tightly interconnected nanoparticles.The sol-flamesynthesized CuO_(x) nanowires(sf-CuO NWs)achieved superior ammonia yield rate(0.51 mmol h^(-1)cm^(-2)),faradaic efficiency(97.3%),and selectivity(86.2%)in 1 M KOH electrolyte(2000 ppm nitrate).This performance surpasses that of non-porous and less-defective CuO NWs and is attributed to the increased surface area and rapid electron transport facilitated by the distinctive morphology and generated defects.Theoretical calculation further suggests oxygen vacancies enhance NO_(3)^(-)adsorption on the sf-CuO NWs’surface and mitigate the competing hydrogen evolution reaction.This study outlines a strategic design and simple synthesis approach for nanowire electrocatalysts that boost the efficiency of electrochemical nitrate-to-ammonia conversion.

Utilization of electroless plating to prepare Cu-coated cotton cloth electrode for flexible Li-ion batteries

Flexible,lightweight and high conductivity substrates are required for the development of next-generation flexible Li-ion batteries(LIBs).In addition,the interfacial strength between the active material and flexible substrate should be optimized for high-performance LIBs.Herein,cotton cloth(CC)is employed as a flexible substrate,and electroless plating is utilized to deposit a layer of Cu nanoparticles,which enhances the conductivity of CC and acts as a precursor for the active material,i.e.,CuO.The results reveal that the in situ etching and subsequent heat treatment converted Cu film into CuO nanowires on CC substrate.Moreover,carbon nano tubes(CNTs)are introduced to enhance the connectivity of CuO nano wires.Consequently,the CuO/CNT/CC electrode rendered a high areal capacity of>700μAh-cm^(-2)after100 charge/discharge cycles as well as excellent rate capability.The current work presents a novel route to develop desirable substrates for next-generation flexible Li-ion batteries.