废烟气脱硝催化剂中TiO_(2)资源化回收实验研究

采用高温碱浸和酸洗的方法对废选择性催化还原(SCR)脱硝催化剂进行处理,研究碱浸和酸洗对催化剂各组分的浸出效果,考察温度对催化剂浸出行为的影响规律。结果表明,碱浸温度的提高促进V和W的浸出,210℃时V和W的浸出率分别为82.38%和74.92%。经高温碱浸和酸洗处理后,Al、Ca、Na等杂质的最高浸出率均可达98%以上,回收TiO_(2)的纯度较高,可用于生产新催化剂。高温碱浸会破坏催化剂的结构,有利于后续HCl处理对杂质的去除,除杂效果优于直接酸洗处理。高温碱浸过程中会生成Na_(2)TiO_(3),经HCl反应并水解后会形成新的TiO_(2)颗粒,形成更多的小孔,比表面积增大。

CuO/CeO_(2)/γ-Al_(2)O_(3)工业球型催化剂的制备及其脱除石灰窑尾气CO的性能

采用分步浸渍法制备了CuO/CeO_(2)/γ-Al_(2)O_(3)工业球型催化剂。通过XRD,SEM,TEM,Raman,H_(2)-TPR等方法对催化剂的结构进行表征,并将CuO/CeO_(2)/γ-Al_(2)O_(3)应用于石灰窑尾气处理中,考察了CuO/CeO_(2)/γ-Al_(2)O_(3)的CO催化氧化效果及使用寿命。实验结果表明,在气体流量为1 m^(3)/h,150℃条件下,CuO/CeO_(2)/γ-Al_(2)O_(3)脱除石灰窑尾气(2%(φ)CO,2%(φ)O_(2),35%(φ)CO_(2)及N2)时,可实现超350 h的稳定运行,且稳定运行后催化剂的结构并未被破坏。

Cl掺杂CuO在Cu^(+)和O空位协同作用下高效电催化还原CO_(2)为C_(2)H_(4)

通过简单的一步水热合成法合成具有富集Cu^(+)和氧空位活性位点的氯掺杂氧化铜催化剂(Cl-CuO),并通过调节氯元素的掺杂量使得Cu基催化剂对乙烯(C_(2)H_(4))拥有较高的选择性和法拉第效率(FE)。结果表明,在-1.2 V[针对可逆氢电极(RHE)]下,C_(2)H_(4)的最大法拉第效率为46.8%;并且在经过15 h电解后,法拉第效率和电流密度无明显下降。Cl-CuO中C_(2)H_(4)的生成归因于Cu^(+)与氧空位的协同作用。

Effect of CeO_(2)on Activity of Catalysts CuO/ZnO/Al_(2)O_(3)/CeO_(2)for Synthesis of Methanol

The size of the nanoparticles and the number of oxygen vacancies have a significant effect on the catalytic activity of copper-based catalysts used for the synthesis of methanol from syngas.In this study,the authors prepared a series of catalysts CuO/ZnO/Al_(2)O_(3)/CeO_(2)(CZAC)with CuO particles of different sizes and varying number of oxygen vacancies on the surface by changing the added volume of CeO2 by using the co-precipitation method.The properties of the catalysts were characterized and their activity was evaluated by using high-pressure fixed-bed reaction equipment.The results showed that the addition of CeO_(2)to CuO/ZnO/Al_(2)O_(3)not only influenced the size of the CuO particles and metal-metal interactions,but also had an effect on the concentrations of oxygen vacancies and strongly basic sites.The presence of CuO particles of small sizes and a large numbers of oxygen vacancies on the surface of the catalyst were beneficial to its activity for the synthesis of methanol.The catalyst CZAC,when modified by 5%of CeO_(2),recorded CuO particles of the smallest size(8.9 nm),strong intermetallic interactions,and the highest concentrations of oxygen vacancies and strongly basic sites.It also exhibited the highest catalytic activity,with a space-time yield of methanol of 0.315 g/(h·g)that was higher than that of the enterprise RK-5 catalyst[0.215 g/(h·g)].

A comparative study of CuO/TiO_2-SnO_2,CuO/TiO_2 and CuO/SnO_2 catalysts for low-temperature CO oxidation

Nanometer SnO2 particles were synthesized by sol-gel dialytic processes and used as a support to prepare CuO supported catalysts via a deposition-precipitation method. The samples were characterized by means of TG-DTA, XRD, H2-TPR and XPS. The catalytic activity of the CuO/TiO2-SnO2 catalysts was markedly depended on the loading of CuO, and the optimum CuO loading was 8 wt.% （Tloo = 80 ℃）. The CuO/TiO2-SnO2 catalysts exhibited much higher catalytic activity than the CuO/TiO2 and CuO/SnO2 catalysts. H2-TPR result indicated that a large amount of CuO formed the active site for CO oxidation in 8 wt.% CuO/TiO2-SnO2 catalyst.

Local structural evolutions of CuO/ZnO/Al2O3 catalyst for methanol synthesis under operando conditions studied by in situ quick X-ray absorption spectroscopy

In situ quick X-ray absorption spectroscopy(QXAFS) at the Cu and Zn K-edge under operando conditions has been used to unravel the Cu/Zn interaction and identify possible active site of CuO/ZnO/Al_2O_3 catalyst for methanol synthesis. In this work, the catalyst, whose activity increases with the reaction temperature and pressure, was studied at calcined, reduced, and reacted conditions. TEM and EDX images for the calcined and reduced catalysts showed that copper was distributed uniformly at both conditions. TPR profile revealed two reduction peaks at 165 and 195 °C for copper species in the calcined catalyst. QXAFS results demonstrated that the calcined form consisted mainly of a mixed Cu O and Zn O, and it was progressively transformed into Cu metal particles and dispersed Zn O species as the reduction treatment. It was demonstrated that activation of the catalyst precursor occurred via a Cu^+intermediate, and the active catalyst predominantly consisted of metallic Cu and Zn O evenunder higher pressures. Structure of the active catalyst did not change with the temperature or pressure, indicating that the role of the Zn was mainly to improve Cu dispersion.This indicates the potential of QXAFS method in studying the structure evolutions of catalysts in methanol synthesis.

Preparation, Characterization of CuO/CeO_2 and Cu/CeO_2 Catalysts and Their Applications in Low-Temperature CO Oxidation

CeO2 was synthesized via sol-gel process and used as supporter to prepare CuO/CeO2, Cu/CeO2 catalysts by impregnation method. The catalytic properties and characterization of CeO2, CuO/CeO2 and Cu/CeO2 catalysts were examined by means of a microreactor-GC system, HRTEM, XRD, TPR and XPS techniques. The results show that CuO has not catalytic activity and the activity of CeO2 is quite low for CO oxidation. However, the catalytic activity of CuO/CeO2 and Cu/ CeO2 catalysts increases significantly. Furthermore, the activity of CuO/CeO2 is higher than that of Cu/CeO2 catalysts.

Experimental and Kinetic Study of Selective Catalytic Reduction of NO with NH_3 over CuO/Al_2O_3/Cordierite Catalyst

The CuO/γ-Al2O3/cordierite catalyst, after being sulfated by sulfur dioxide (SO2) at 673 K, exhibits high activities for selective catalytic reduction (SCR) of nitrogen oxide (NO) with ammonia (NH3) at 573-723 K. The intrinsic kinetics of SCR of NO with NH3 over CuO/γ-Al2O3/cordierite catalyst has been measured in a fixed-bed reactor in the absence of internal and external diffusions. The experimental results show that the reaction rate can be quantified by a first-order expression with activation energy Eá of 94.01 kJ·mol-1 and the corresponding p re-exponential factor A′ of 3.39×108 cm3·g-1·s-1 when NH3 is excessive. However, when NH3 is not enough, an E ley-Rideal kinetic model based on experimental data is derived with Ea of 105.79 kJ·mol-1, the corresponding A of 2 .94×109 cm3·g-1·s-1, heat of adsorption-Hads of 87.90 kJ·mol-1 and the corresponding Aads of 9.24 cm3·mol-1. The intrinsic kinetic model obtained was incorporated in a 3D mathematical model of monolithic reactor, and the agreement of the prediction with experimental data indicates that the present kinetic model is adequate for the reac-tor design and engineering scale-up.

Preferential oxidation of CO in excess H_2 over the CeO_2/CuO catalyst: Effect of initial support

Three series of CeO2/CuO samples were prepared by impregnation method and characterized by XRD, N2 adsorption-desorption, temperatureprogrammed reduction （TPR）, XPS and TEM techniques. In comparison with the samples prepared with CuO as initial support, the samples with Cu（OH）2 as initial support have higher reducibilities and smaller relative TPR peak areas, and also larger specific surface areas at calcina- tion temperatures of 400 ℃--600 ℃. As a result, Cu（OH）2 is better than CuO as initial support for preferential oxidation of CO in excess H2 （CO-PROX）. The best catalytic performance was achieved on the sample calcined at 600 ℃ and with an atomic ratio of Ce/Cu at 40%. XPS analyses indicate that more interface linkages Ce-O-Cu could be formed when it was calcined at 600 ℃. And the atomic ratio of Ce/Cu at 40% led to a proper reducibility for the sample as illustrated by the TPR measurements.

Catalytic Oxidative Properties and Characterization of CuO/CeO_2 Catalysts

The oxidative properties and characterization of CuO, CeO 2 and CuO/CeO 2 cata lysts were examined by means of a CO micro-reactor GC system, TPR, XPS and X-r ay diffraction Rietveld methods. The results show that either CuO or CeO 2 ac tivity is quite low for CO oxidation. However, when CuO and CeO 2 are mixed, the oxidative activity of the catalyst increases significantly, probably owing to the valency status of copper species (Cu 2+ and Cu+) on the CeO 2 surfa ce, the dispersion and reducibility. XPS surface analysis shows that CuO loading is very important in forming of either Cu 2+ or Cu+. Rietveld analysis s hows that some CuO, which has smaller ion radius than Ce 4+, enters the Ce O 2 lattice after CuO and CeO 2 are mixed. When the CuO loading reaches 5.0%, the size of CuO crystals is a minimum (6.1 nm) and the micro-strain value i s a maximum (2.86×10 -3), resulting in high surface energy and the best ac tivity for CO oxidation.

Ce_xTi_(1-x)O_2 Mixed Oxides Supported CuO Catalyst for NO Reduction by CO

Ce x Ti 1- x O 2 mixed oxides of different mole ratios ( x =0, 0.1, 0.2～0.9, 1.0) were prepared by co precipitation of TiCl 4 with Ce(NO 3) 3 and then loaded with different amounts of CuO. The effects of CuO on NO+CO reaction were investigated, and the structure and reductive properties of various CuO/Ce x Ti 1- x O 2 were characterized by the methodologies of BET, TPR and XRD. The results show that different Ce/Ti mole ratios and calcination temperatures induce changes of structure and reductive properties of the Ce x Ti 1- x O 2 mixed oxides. When x =0.1～0.5, amorphous CeTi 2O 6 phase mainly forms at 650 ℃ compared to the formation of CeTi 2O 6 which crystallizes at 800 ℃. When x >0.6, some TiO 2 enters the CeO 2 lattice and a CeO 2 TiO 2 solid solution is formed. The activity of 6%CuO/Ce x Ti 1- x O 2 calcined at 650 ℃ is largely affected by the x values, which is the highest when x =0.3, 0.4 and 0.9. The NO conversion reaches 70% at a reaction temperature of 150 ℃. By comparison, the x values have little effect on the activity of 6%CuO/Ce x Ti 1- x O 2 calcined at 800 ℃ . There are strong interactions between CuO and CeTi 2O 6, i.e., formation of the CeTi 2O 6 phase shifts the CuO reduction peak temperature from 380 to 200 ℃, and CuO, in turn, shifts the CeTi 2O 6 reduction peak temperature from 600 to 300 ℃.

Effect of Addition of Base on Ceria and Reactivity of CuO/CeO_2 Catalysts for Low-Temperature CO Oxidation

In this work, we have reported the influence of the addition of base （KOH） on the physicochemical property of ceria synthesized by alcohothermal process, and the alcohothermal mechanism was also put forward. Furthermore, the prepared CeO2 was used as the support to prepare CuO/CeO2 catalysts via the wet impregnation method. The samples were characterized by N2 adsorption-desorption, X-ray powder diffraction （XRD）, high resolution transmission electron microscopy （HRTEM）, and temperatureprogrammed reduction by H2 （H2-TPR）. The catalytic properties of the CuO/CeO2 catalysts for lowtemperature CO oxidation were studied using a microreactor-GC system. The crystal size of CeO2-A was much smaller than that of CeO2-B, and the corresponding copper oxide catalysts exhibited higher catalytic activity than that of the CeO2-B-supported catalysts under the same reaction conditions. The alcohothermal mechanism indicated that KOH plays a key role in determining the physicochemical and catalytic properties of ceria-based materials.

Stable CuO/La_(2)Sn_(2)O_(7) catalysts for soot combustion:Study on the monolayer dispersion behavior of CuO over a La_(2)Sn_(2)O_(7) pyrochlore support

To understand the dispersion behavior of metal oxides on composite oxide supports and with the expectation of developing more feasible catalysts for soot oxidation,CuO/La_(2)Sn_(2)O_(7)samples containing varied CuO loadings were fabricated and characterized by different techniques and density functional theory calculations.In these catalysts,a spontaneous dispersion of CuO on the La_(2)Sn_(2)O_(7)pyrochlore support formed,having a monolayer dispersion capacity of 1.90 mmol CuO/100 m^(2) La_(2)Sn_(2)O_(7)surface.When loaded below this capacity,CuO exists in a sub-monolayer or monolayer state.X-ray photoelectron spectroscopy(XPS),Raman spectroscopy,and Bader charge and density of states analyses indicate that there are strong interactions between the sub-monolayer/monolayer CuO and the La_(2)Sn_(2)O_(7)support,mainly through the donation of electrons from Cu to Sn at the B-sites of the structure.In contrast,Cu has negligible interactions with La at the A-sites.This suggests that,in composite oxide supports containing multiple metals,the supported metal oxide interacts preferentially with one kind of metal cation in the support.The Raman,in situ diffuse reflectance infrared Fourier transform spectroscopy,and XPS results confirmed the formation of both O2^(-)and O2^(2-)as the active sites on the surfaces of the CuO/La_(2)Sn_(2)O_(7)catalysts,and the concentration of these active species determines the soot combustion activity.The number of active oxygen anions increased with increase in CuO loading until the monolayer dispersion capacity was reached.Above the monolayer dispersion capacity,microsized CuO crystallites formed,and these had a negative effect on the generation of active surface oxygen sites.In summary,a highly active catalyst can be prepared by covering the surface of the La_(2)Sn_(2)O_(7)support with a CuO monolayer.

Effects of Carrier on CuO/TiO_2 and CuO/Ti_(0.5)Zr_(0.5)O_2 Catalysts in the NO+CO Reaction

Using TiO2 and Ti0.5Zr0.5O2 as carriers, the CuO/TiO2 and CuO/Ti0.5Zr0.5O2 catalystswere prepared by the impregnation method with Cu(NO3)2 as active component. The catalyticactivities in NO+CO reaction were investigated using a microreactor-GC system, and structure andreducibility of catalysts were characterized by means of physical adsorption, TPR, XRD, NO-TPDtechnologies. It was found that the activity of CuO/Ti0.5Zr0.5O2 catalyst was higher than that ofCuO/TiO2, probably due to the large specific surface area of Ti0.5Zr0.5O2 that played an importantrole in NO+CO reaction.

Effect of yttrium addition on water-gas shift reaction over CuO/CeO_2 catalysts

This paper presented a study on the role of yttrium addition to CuO/CeO2 catalyst for water-gas shift reaction. A single-step co-precipitation method was used for preparation of a series of yttrium doped CuO/CeO2 catalysts with yttrium content in the range of 0-5wt.%. Properties of the obtained samples were characterized and analyzed by X-ray diffraction （XRD）, Raman spectroscopy, H2-TPR, cyclic voltammetry （CV） and the BET method. The results revealed that catalytic activity was increased with the yttrium content at first, but then decreased with the further increase of yttrium content. Herein, CuO/CeO2 catalyst doped with 2wt.% of yttrium showed the highest catalytic activity （CO conversion reaches 93.4% at 250 ℃） and thermal stability for WGS reaction. The catalytic activity was correlated with the surface area, the area of peak γ of H2-TPR profile （i.e., the reduction of surface copper oxide （crystalline forms） interacted with surface oxygen vacancies on ceria）, and the area of peak C2 and A1 （Cu^0→←Cu^2＋ in cyclic voltammetry process）, respectively. Besides, Raman spectra provided evidences for a synergistic Cu-Ovacancy interaction, and it was indicated that doping yttrium may facilitate the formation of oxygen vacancies on ceria.

Effect of Addition of Sm_2O_3 on Property of CuO-γ-Al_2O_3 Catalyst

Effect of the addition of Sm 2O 3 on CuO γ Al 2O 3 catalyst for CO oxidation reaction was investigated. The result shows that the right amount of Sm 2O 3 can promote the adsorption of the surface oxygen and recovery of CuO γ Al 2O 3 catalyst. Sm 2O 3 plays an important role in change of γ Al 2O 3 phase into θ Al 2O 3 phase. In addition, the right amount of Sm 2O 3(5%) can improve the oxidation activity of the CuO γ Al 2O 3 catalyst. Whereas an excess of Sm 2O 3(10%) makes the CuO crystal in CuO γ Al 2O 3 catalyst become bigger and restrain the oxidation activity of the CuO γ Al 2O 3 catalyst.

以TiO_2多孔微球为载体的CuO/TiO_2催化剂的制备、表征及CO氧化催化性能

利用高分子反相悬浮聚合技术结合溶胶-凝胶法制备了纳米TiO2晶粒组成的多孔微球.以TiO2多孔微球为载体,利用浸渍法制备了CuO/TiO2催化剂,用示差扫描量热法、热重分析、X射线衍射和X射线光电子能谱(XPS)对TiO2多孔微球和催化剂进行了表征,并对其进行了CO催化氧化性能的评价.结果表明,于500℃焙烧的TiO2多孔微球基本为锐钛矿型结构,其粒径为19.5nm.XPS结果表明,催化剂中载体和活性组分存在相互作用,Cu除了以Cu2+的形式存在外,还以部分Cu+和Cu0的形式存在.CO催化氧化研究结果表明,催化剂的催化活性与浸渍液的浓度和催化剂的焙烧温度有关.用0.5mol/LCu(NO3)2·3H2O溶液浸渍得到的催化剂和于200℃焙烧得到的催化剂具有较好的催化活性.

CuO负载在TiO_2和CeO_2-TiO_2上对NO+CO反应的催化作用

用NO +CO微反流动法、TPR、XRD、BET和NO TPD等技术研究了CuO在TiO2 和CeO2 TiO2 上对NO +CO的催化还原作用 .实验表明 ,不同负载量的CuO在TiO2 上 ,其NO +CO的反应活性以Cu12 Ti为最佳 ,在反应温度为 4 0 0℃时 ,NO的转化率达到 10 0 % ;且CuO负载在CeO2 TiO2 上其活性随CeO2 含量的增加而提高 ,Cu12 Ce10 Ti在 30 0℃时就能使NO达到 10 0 %转化 .XRD和TPR结果显示 ,该体系催化活性的高低 ,与CuO在TiO2 和CeO2 TiO2 上高度分散的Cu物种及形成细颗粒的晶相CuO物种有非常密切的关系 ;NO TPD结果显示 ,催化剂还原活性的高低和NO在催化剂表面的脱出与分解难易程度有关 .

等离子体协同CuO/TiO_2-γ-Al_2O_3催化CH_4脱除NO

对合成的12%CuO/15%TiO2/γ-Al2O3催化剂进行了BET和XRD表征,并结合等离子体与催化协同脱除NO的反应装置,考察了单一等离子体、单一催化剂以及等离子体与催化协同脱除NO+CH4+O2的反应结果,研究了上述三种条件下NO和CH4的转化率.BET表征结果表明,15%TiO2/γ-Al2O3的孔径分布在微孔和介孔之间;XRD结果表明,催化剂表面有CuO晶相;反应活性数据表明,单一等离子体存在时,NO和CH4的转化率随着等离子体的输入功率增大而逐渐增加,反应体系引入体积分数为2.5%的O2气促进了NO和CH4的转化;使用单一催化剂时,NO和CH4的转化率随温度升高而分别增大至30%和20%.同时NO转化率随O2气浓度的增加先增加后降低,CH4随O2气浓度的增加转化率逐渐增大;等离子体与催化剂协同作用NO+CH4+O2反应中,NO和CH4的转化率随O2气浓度的增加与只有催化剂存在条件下的变化趋势一致,但是增大了NO的低温转化率,同时CH4的转化率提高到了90%.

简单浸渍法制备纳米CuO/TiO_2及其光催化剂活性

以Cu(NO3)2·3H2O和P25为前躯体,通过简单浸渍法制备了CuO/TiO2光催化剂,利用N2物理吸附、XRD、TEM、UV-vis漫反射光谱分析了催化剂的结构特性。研究了Cu组分的负载量、催化剂在反应液中的分散量、催化剂焙烧温度、反应液中甲醇浓度对CuO/TiO2光催化反应产氢活性的影响,并考察了催化剂的稳定性,提出了该体系光催化反应的机理。结果表明,Cu的适宜负载量为2.0%～7.5%(质量分数),在Cu质量分数2.0%、催化剂焙烧温度350℃、甲醇的体积浓度为10%、催化剂分散量为1.0 g/L时,产氢活性可达到1 022μmol/(h.g),并且该催化剂具有较好的稳定性。