Influence of Current Density on the Photocatalytic Activity of Nd:TiO_(2) Coatings

The Nd:TiO_(2 )PEO coatings were formed in a phosphate-based electrolyte with the addition of Nd_(2)O_(3 )under the current density of 150,200,250 and 300 m A/cm^(2).SEM results showed that the micropores decreased on quantity and increased on scale with the increasing current density.AFM results revealed that the roughness of the coatings increased with the increasing current density.Phase and composition analysis showed that the Nd:TiO_(2) coatings were mainly composed of anatase and rutile phase.And the anatase phase content has reached the maximum value at the current density of 250 m A/cm^(2).XPS results indicated that Ti2p spin-orbit components of the Nd:TiO_(2) coatings are shifted towards higher binding energy,compared with the pure TiO_(2) coating,suggesting that some of the Nd^(3+)ions are combined with TiO_(2) lattice and led to dislocation.Photocatalytic test showed that the photocatalytic activity of Nd:TiO_(2) coatings varied in the same pattern with the anatase content variation in Nd:TiO_(2) coatings.The photocatalytic experiment results show that the photocatalytic activity of Nd:TiO_(2) coatings can be greatly enhanced with moderate amount of Nd^(3+).However,excessive amount of Nd^(3+)does not have an effective impact on the photoctalytic activity improvement.

Strong electronic coupling of CoNi and N-doped-carbon for efficient urea-assisted H2 production at a large current density

Exploiting efficient urea oxidation reaction(UOR)and hydrogen evolution reaction(HER)catalysts are significant for energy-saving H2 production through urea-assisted water electrolysis,but it is still challenging.Herein,carbon-encapsulated CoNi coupled with CoNiMoO(CoNi@CN-CoNiMoO)is prepared by solvothermal method and calcination to enhance the activity/stability of urea-assisted water electrolysis at large current density.It exhibits good activity for UOR(E10/1,000=1.29/1.40 V)and HER(E-10/-1000=-45/-245 mV)in 1.0 M KOH+0.5 M urea solution.For the UOR||HER system,CoNi@CN-CoNiMoO only needs 1.58 V at 500 mA cm-2 and shows good stability.Density functional theory calculation suggests that the strong electronic interaction at the interface between NiCo alloy and N-doping-carbon layers can optimize the adsorption/desorption energy of UOR/HER intermediates and accelerate the water dissociation,which can expedite urea decomposition and Volmer step,thus increasing the UOR and HER activity,respectively.This work provides a new solution to design UOR/HER catalysts for H2 production through urea-assisted water electrolysis.

Influence of the electrolyte conductivity on the critical current density and the breakdown voltage

The work investigates influence of the electrolyte conductivity on the onset of partial contact glow discharge electrolysis(CGDE)in a water electrolysis.Critical current density(CCD)and breakdown voltage were measured together with in situ observation of hydrogen bubble behavior,whose influence has not been focused on.For a fixed current during normal electrolysis,hydrogen coalescence adjacent to cathode surface was invigorated at a lower conductivity.Photographic analyses elucidated the hydrogen coalescence characteristics by quantifying size and population of detached hydrogen bubbles.The CCD increased about 104% within given range of conductivity(11.50-127.48 mS·cm^(-1))due to impaired bubble coalescence,which delays hydrogen film formation on the cathode.Meanwhile,decreasing trend of breakdown voltage was measured with increased conductivity showing maximum drop of 74%.It is concluded that onset of partial CGDE is directly affected by hydrodynamic bubble behaviors,whereas the electrolyte conductivity affects the bubble formation characteristics adjacent to cathode electrode.

Revealing the potential of apparent critical current density of Li/garnet interface with capacity perturbation strategy

Apparent critical current density(j_(Ac)^(a))of garnet all-solid-state lithium metal symmetric cells(ASSLSCs)is a fundamental parameter for designing all-solid-state lithium metal batteries.Nevertheless,how much the possible maximum apparent current density that a given ASSLSC system can endure and how to reveal this potential still require study.Herein,a capacity perturbation strategy aiming to better measure the possible maximum j_(Ac)^(a)is proposed for the first time.With garnet-based plane-surface structure ASSLSCs as an exemplification,the j_(Ac)^(a)is quite small when the capacity is dramatically large.Under a perturbed capacity of 0.001 mA h cm^(-2),the j_(Ac)^(a)is determined to be as high as 2.35 mA cm^(-2)at room temperature.This investigation demonstrates that the capacity perturbation strategy is a feasible strategy for measuring the possible maximum j_(Ac)^(a)of Li/solid electrolyte interface,and hopefully provides good references to explore the critical current density of other types of electrochemical systems.

A theoretical analysis of the electromigration-induced void morphological evolution under high current density

In this work, analysis of electromigration-induced void morphological evolution in solder interconnects is performed based on mass diffusion theory. The analysis is conducted for three typical experimentally observed void shapes: circular, ellipse, and cardioid. Void morphological evolution is governed by the competition between the electric field and surface capillary force. In the developed model, both the electric field and capillary force on the void's surface are solved analytically. Based on the mass conversation principle, the normal velocity on the void surface during diffusion is obtained. The void morphological evolution behavior is investigated, and a physical model is developed to predict void collapse to a crack or to split into sub-voids under electric current. It is noted that when the electric current is being applied from the horizontal direction, a circular void may either move stably along the electric current direction or collapse to a finger shape, depending on the relative magnitude of the electric current and surface capillary force. However, the elliptical-shaped void will elongate along the electric current direction and finally collapse to the finger shape. On the other hand, the cardioid-shaped void could bifurcate into two sub-voids when the electric current reaches a critical value. The theoretical predictions agree well with the experimental observations.

N‑Doped Graphene‑Decorated NiCo Alloy Coupled with Mesoporous NiCoMoO Nano‑sheet Heterojunction for Enhanced Water Electrolysis Activity at High Current Density

Developing highly effective and stable non-noble metalbased bifunctional catalyst working at high current density is an urgent issue for water electrolysis(WE).Herein,we prepare the N-doped graphene-decorated NiCo alloy coupled with mesoporous NiCoMoO nano-sheet grown on 3D nickel foam(NiCo@C-NiCoMoO/NF)for water splitting.NiCo@C-NiCoMoO/NF exhibits outstanding activity with low overpotentials for hydrogen and oxygen evolution reaction(HER:39/266 mV;OER:260/390 mV)at±10 and±1000 mA cm^(−2).More importantly,in 6.0 M KOH solution at 60℃ for WE,it only requires 1.90 V to reach 1000 mA cm−2 and shows excellent stability for 43 h,exhibiting the potential for actual application.The good performance can be assigned to N-doped graphene-decorated NiCo alloy and mesoporous NiCoMoO nano-sheet,which not only increase the intrinsic activity and expose abundant catalytic activity sites,but also enhance its chemical and mechanical stability.This work thus could provide a promising material for industrial hydrogen production.

Effect of the current density on electrodepositing alpha-lead dioxide coating on aluminum substrate

The α-PbO2 electrodes are prepared by anodic electrodeposition on Al/conductive coating electrode from alkaline plumbite solutions in order to investigate the effect of the different current densities on the properties of α-PbO2 electrodes. The physic- ochemical properties of the α-PbO2 electrodes are analyzed by using SEM, EDS, XRD, Tafel plot, linear sweep voltammetry （LSV） and A.C. impedance. A compact and uniform layer of lead dioxide ：）vas obtained at the current density of 3 mA.cm-2. A further increase in current density results in smaller particles with high porosity. EDS and XRD analyses have shown that the PbO2 deposited in alkaline conditions is highly non stoichiometric, and the PbO impurities are formed on the surface layer besides the α-PbO2. The corrosion resistance of α-PbO2 at the low current density is superior to that of the high current density. It can be attributed to a porous layer of deposited films at high current densities in aqueous Zn2＋ 50 g·L^-1, H2SO4 150 When used as anodes for oxygen evolution g·L^-1, the Al/conductive coating/α-PbO2 exhibits lower potential compared to Pb electrode. Al/conductive coating/α-PbO2 electrode with the best electrocatalytic activity was obtained at current density of 1 mA·cm^-2. The lowest roughnest factor was obtained at 1 mA·cm^-2.

Three-D numerical simulation of wind-driven current and density current in the Beibu Gulf

The Casulli's difference scheme was introduced into the three-dimensional ocean model in the present paper, and the wind-driven current and thermohaline current were simulated. The results show that, southwesterly monsoon in summer induces a clockwise circulation in the Beibu Gulf, and the density gradient induces a counter-clockwise one; but the density current is more intense than the wind- driven one in summer, espeially in surface layer. In addition, the northeasterly monsoon in winter in- duces a counter-clockwise circulation. The simulated results don't support the traditional condusion that there is a clockwise circulation in the Beibu Gulf in summer and a counter-clockwise one in winter, but support the statement that a counterclockwise circulation exists in the Beibu Gulf all year round.

Numerical Simulation of Current Density Distribution in Keyhole Double-Sided Arc Welding

In the double-sided arc welding system (DSAW) composing of PAW+TIG arcs, the PAW arc is guided by the TIG arc so that the current mostly flows through the direction of the workpiece thickness and the penetration is greatly improved. To analyze the current density distribution in DSAW is beneficial to understanding of this process. Considering all kinds of dynamic factors acting on the weldpool, this paper discusses firstly the surface deformation of the weldpool and the keyhole formation in PAW+TIG DSAW process on the basis of the magnetohydrodynamic theory and variation principles. Hence, a model of the current density distribution is developed. Through numerical simulation, the current density distribution in PAW+TIG DSAW process is quantitatively analyzed. It shows that the minimal radius of keyhole formed in PAW+TIG DSAW process is 0.5 mm and 89.5 percent of current flows through the keyhole.

Experimental Study of Current Loss of Stainless Steel Magnetically Insulated Transmission Line with Current Density at MA/cm Level

A magnetically insulated transmission line （MITL） is used to transmit high power electric pulses in large pulse power systems. However, current loss is unavoidable, especially when the current density is up to 1 MA/cm. In the paper, the current loss of an MITL made of stainless steel, which is usually used in large pulse power generators, is experimentally studied, and possible mechanisms to explain the current loss of the MITL are analyzed and discussed. From the experimental results, the relationship between loss current density and input current density follows approximately a power law. The loss is also related to the configuration of the MITL.

Effect of Current Density on Al Alloy Microplasma Oxidation

The microplasma oxidation process of LY 12 Al alloy in Na2SiO3-KOH-NaAL2 system has been studied. The voltage-time curve of oxidation process is changed with the variation of current densities. The voltage breakdown and hardness of coating increase with increasing current density. The phase composition, morphologies, element and the distribution of ceramic coating are investigated by XRD, EPMA.

Determination of arc pressure pool surface in and current density on the molten plasma arc welding

A unified numerical model is developed to couple the plasma arc, weld pool and keyhole in a self consistent way. The plasma arc/anode interface and the melt/solid interface are treated specially, the VOF method is used to trace the moving keyhole wall, and the fluid flow and heat transfer in both the plasma arc and weld pool are numerically simulated. The distributions of current density and arc pressure on the weld pool surface during the keyhole formation process are analyzed using the coupled model. The predicted arc pressure and current density are compared with the experimentally measured results, and both are in good agreement.

Plating current density distribution of lithium metal anodes in pouch cells

The uniformity of current density distribution upon electrodes is one of the most important factors determining the lithium dendrites growth and cycling performance of lithium metal batteries(LMBs). Herein,current density distributions of lithium metal anodes induced by various engineering factors, consisting of uneven cathode, electrolyte distribution, and different tab positions, and their effects on the electrochemical performance are investigated theoretically and experimentally in pouch cells. The deviation of current density in lithium metal anodes ranges from 2.47% to 196.18% due to the different levels of uneven cathode materials. However, the deviation is just 13.60% for different electrolyte thicknesses between cathodes and anodes, even a ten-layer separator in some positions. The maximum deviation for variational tab positions is only 0.17%. The nonuniformity in current density distribution results in severe dendrite growth issues and poor electrochemical performance of LMBs. This work not only confirms the direct correlation between the uneven current density distribution and lithium deposition behaviors, but also points out the decisive effects of cathode surface roughness on current distribution of anodes, to which more attentions should be paid in practical applications of LMBs.

Effect of Current Density on Microstructure and Corrosion Behavior of Plasma Electrolytic Oxidation Coated 6063 Aluminum Alloy

Plasma electrolytic oxidation(PEO) coatings were fabricated on 6063 aluminum alloy in a cheap and convenient electrolyte. The effect of different current densities, i e, 5, 10, 15, and 20 A/dm2on the microstructure and corrosion behavior of coatings was comprehensively studied by scanning electron microscopy(SEM), stereoscopic microscopy, potentiodynamic polarization and electrochemical impedance spectroscopy(EIS), respectively. It is found that the pore density decreases and the pore size increases with increasing current density. The XRD results show that the coatings are only composed of α-Al2O3and γ-Al2O3. Potentiodynamic polarization test proves that the coating formed under 10 A/dm2possesses the best anticorrosion property. The long time EIS test shows that the coating under 10 A/dm2is able to protect the aluminum alloy substrate after long time of immersion in 0.59 M NaCl solution, which confirms the salt solution immersion test results in 2 M NaCl solution.

Influence of optical interference and carrier lifetime on the short circuit current density of organic bulk heterojunction solar cells

Based on simple analytical equations, short circuit current density （Jsc） of the organic bulk heterojunction solar cells has been calculated. It is found that the optical interference effect plays a very important role in the determination of Jsc; and obvious oscillatory behaviour of Jsc was observed as a function of thickness. At the same time, the influence of the carrier lifetime on Jsc also cannot be neglected. When the carrier lifetime is relatively short, Jsc only increases at the initial stage and then decreases rapidly with the increase of active layer thickness. However, for a relatively long carrier lifetime, the exciton dissociation probability must be considered, and Jsc behaves wave-like with the increase of active layer thickness. The validity of this model is confirmed by the experimental results.

Water Dissociation Phenomena on a Bipolar Membrane──Current-voltage Curve in Relation with IonicTransport and Limiting Current Density

The water dissociation mechanism on a bipolar membrane under the electrical field was investigated and characterized in terms of ionic transport and limiting current density. It is considered that the depletion layer exists at the junction of a bipolar membrane, which is coincided with the viewpoint of the most literatures, but we also consider that the thickness and conductivity of this layer is not only related with the increase of the applied voltage but also with the limiting current density. Below the limiting current density, the thickness of the depletion layer keeps a constant and the conductivity decreases with the increase of the applied voltage; while above the limiting current density, the depletion thickness will increase with the increase of the applied voltage and the conductivity keeps a very low constant. Based on the data reported in the literatures and independent determinations, the limiting current density was calculated and the experimental curves Ⅰ-Ⅴ in the two directions were com

Influence of anode current density on carbon parasitic reactions during electrolysis

In the electro-deoxidation process,carbon parasitic reaction(CO_(3)^(2-)+4e–=C+3O^(2-))usually occurs when using carbon materials as the anode,which leads to increase of the carbon content in the final metal and decrease of the current efficiency of the process.The aim of this work is to reduce the negative effect of carbon parasitic reaction on the electrolysis process by adjusting anode current density.The results indicate that lower graphite anode area can achieve higher current density,which is helpful to increase the nucleation site of CO_(2) bubbles.Most of CO_(2) would be released from the anode instead of dissolution in the molten CaCl_(2) and reacting with O^(2-)to form CO_(3)^(2-),thus decreasing the carbon parasitic reaction of the process.Furthermore,the results of the compared experiments show that when the anode area decreases from 172.78 to 4.99 cm^(2),CO_(2) concentration in the released gases increases significantly,the carbon mass content in the final metal product decreased from 1.09%to 0.13%,and the current efficiency increased from 6.65%to 36.50%.This study determined a suitable anode current density range for reducing carbon parasitic reaction and provides a valuable reference for the selection of the anode in the electrolysis process.

Regulation of hydrogen evolution performance of titanium oxide-carbon composites at high current density with a Ti-O hybrid orbital

Rational design and controllable synthesis of practical electrodes with high sta bility and activity at high current density for a hydrogen evolution reaction(HER)are critical for renewable and sustainable energy conversion.However,high-performance TiO_(2)-based electrocatalysts for HER are quite limited,and the cat alytic active centers still remain elusive.Herein,a simple strategy is demonstrated for the synthesis of TiO_(2)-carbon composite(TiO_(2)/C)with high HER performance and stability.The remarkable HER performance of TiO_(2)/C can be ascribed to the doping of carbon atoms,which leads to stronger hybridization of Ti 3d and O 2p orbitals,thus substantially improving the electrocatalytic efficiency.This study elucidates that the hydrogen evolution activity of oxide electrocatalysts can be largely improved by regulating their electronic structures by doping carbon atoms and also provides an effective strategy for designing heterostructured electro catalysts with high catalytic activity and stability at high current density for HER.

Influence of current density on nano-Al_2O_3/Ni+Co bionic gradient composite coatings by electrodeposition

Metal and nano-ceramic nanocomposite coatings were prepared on the gray cast iron surface by the electrodeposition method. The Ni-Co was used as the metal matrix,and nano-Al2O3 was chosen as the second-phase particulates. To avoid poor inter-face bonding and stress distribution,the gradient structure of biology materials was found as the model and therefore the gradient composite coating was prepared. The morphology of the composite coatings was flatter and the microstructure was denser than that of pure Ni-Co coatings. The composite coatings were prepared by different current densities,and the 2-D and 3-D morphologies of the surface coatings were observed. The result indicated that the 2-D structure became rougher and the 3-D surface density of apices became less when the current density was increased. The content of nanoparticulates reached a maximum value at the current density of 40mA·cm^-2,at the same time the properties including microhardness and wear-resistance were analyzed. The microhardness reached a maximum value and the wear volume was also less at the current density of 40mA·cm^-2. The reason was that nano-Al2O3 particles caused dispersive strengthening and grain refining.

Effects of Cold Working and Annealing on the Microstructure and Critical Current Density of Ag-sheathed BiPbSrCaCuO Superconducting Tapes

Ag-sheathed BiPbSrCaO(2223)superconducting tapes prepared by the powder-in-tube technique were inVeSgated. The Mswt of M layCr and the Jc at 77 K are spengly dspendent on the amouDt of cold wotheg and annchg condition. The Jc bo by uhahal tw aha drawing and rolling. The OPbown annwtg theperawt, boe and coohag de tO madrihe Jc vaiueS were in the range 84()-- 850t, 1bo^2bo h and 50-- loot / h, nyhvejy. The mndum tuSPOrt Jt at 77 K under zero mopetic field was l.33 x l04 A / cm2.