This research paper contains a new electronically tunable current-mode biquadratic universal filter using a new active building block;current controlled differential difference current conveyor transconductance amplif...This research paper contains a new electronically tunable current-mode biquadratic universal filter using a new active building block;current controlled differential difference current conveyor transconductance amplifier (CCDDCCTA). The proposed filter provides the following important and desirable features: (i) One can use only one CCDDCCTA and two capacitors;(ii) One can get low pass (LP), band pass (BP), high pass (HP), notch (NF) and all pass (AP) current responses from the same configuration without any alteration;(iii) Passive components are grounded, which ease the integrated circuit implementation;(iv) Responses are electronically tunable;and (v) Sensitivity is low. Moreover, the non-ideality analysis shows that the parasitic passive components can be compensated for the proposed circuit. The functionality of the design is verified through SPICE simulations using 0.25 μm CMOS TSMC technology process parameters. Simulation result agrees well with the theoretical analysis.展开更多
A new circuit for realization of universal current-mode filter using current Follower Transconductance Amplifiers (CFTAs) is presented. The proposed circuit realizes current-mode low pass, high pass and band pass filt...A new circuit for realization of universal current-mode filter using current Follower Transconductance Amplifiers (CFTAs) is presented. The proposed circuit realizes current-mode low pass, high pass and band pass filter functions simultaneously with a single current source at the input. The band reject and all pass filters can also be obtained from the proposed circuit without any extra hardware. The proposed circuit employs three passive grounded elements and two CFTAs. Linear electronic control of natural frequency ω0 is available in the proposed circuit. The quality factor can be independently adjusted through grounded resistor. The proposed circuit employs two grounded capacitors and a grounded resistor along with two CFTAs. The grounded resistor can be replaced by an OTA based circuit for linear electronic control of quality factor Q0. The circuit exhibits low active and passive sensitivities for ω0 and Q0. Simulation results are obtained using PSPICE software which is in conformity with the theoretical findings.展开更多
Basing on the state variable method, a block diagram of the current-mode biquad active circuit was proposed, whose integrators were realized using three kinds of active elements such as operational amplifier, second g...Basing on the state variable method, a block diagram of the current-mode biquad active circuit was proposed, whose integrators were realized using three kinds of active elements such as operational amplifier, second generation current conveyors and operational transconduc-tance amplifiers-electric capacity. The characteristics of each circuit were analyzed.展开更多
A complete state variable current-mode biquadratic filter built by duo-output CCII (DOCCII) with variable current gain is presented. All the coefficients of the filter can be independently tuned through the variable c...A complete state variable current-mode biquadratic filter built by duo-output CCII (DOCCII) with variable current gain is presented. All the coefficients of the filter can be independently tuned through the variable current gain factors of the DOCCII. Based on the principles upon which the general biquadratic filter was constructed, a universal electronically tunable current-mode filter is proposed which implements the low-pass, high-pass, band-pass, band-suppress and all-pass second order transfer functions simultaneously. The PSPICE simulations of frequency responses of second-order filter of are also given.展开更多
In order to obtain the multiple-feedback filter with simpler structure and electronic control,this paper first derives nodal admittance matrix(NAM)equation of the multiple-feedback filter.Furthermore,in accordance wit...In order to obtain the multiple-feedback filter with simpler structure and electronic control,this paper first derives nodal admittance matrix(NAM)equation of the multiple-feedback filter.Furthermore,in accordance with the pathological models of the operational transconductance amplifier(OTA)and second generation current-controlled conveyor(CCCII),the multiplefeedback filter based on OTAs and CCCIIs are respectively synthesized by the NAM expansion method.The filter employing three OTAs has eight equivalent realizations and the filter employing three CCCIIs has 16 equivalent realizations.24 different forms of the current-mode filters are synthesized in all.fo and Q of the synthesized filters can be tuned by tuning bias currents of the active elements.The hand analysis and computer analysis are included to support the method to be utilized.展开更多
文摘This research paper contains a new electronically tunable current-mode biquadratic universal filter using a new active building block;current controlled differential difference current conveyor transconductance amplifier (CCDDCCTA). The proposed filter provides the following important and desirable features: (i) One can use only one CCDDCCTA and two capacitors;(ii) One can get low pass (LP), band pass (BP), high pass (HP), notch (NF) and all pass (AP) current responses from the same configuration without any alteration;(iii) Passive components are grounded, which ease the integrated circuit implementation;(iv) Responses are electronically tunable;and (v) Sensitivity is low. Moreover, the non-ideality analysis shows that the parasitic passive components can be compensated for the proposed circuit. The functionality of the design is verified through SPICE simulations using 0.25 μm CMOS TSMC technology process parameters. Simulation result agrees well with the theoretical analysis.
文摘A new circuit for realization of universal current-mode filter using current Follower Transconductance Amplifiers (CFTAs) is presented. The proposed circuit realizes current-mode low pass, high pass and band pass filter functions simultaneously with a single current source at the input. The band reject and all pass filters can also be obtained from the proposed circuit without any extra hardware. The proposed circuit employs three passive grounded elements and two CFTAs. Linear electronic control of natural frequency ω0 is available in the proposed circuit. The quality factor can be independently adjusted through grounded resistor. The proposed circuit employs two grounded capacitors and a grounded resistor along with two CFTAs. The grounded resistor can be replaced by an OTA based circuit for linear electronic control of quality factor Q0. The circuit exhibits low active and passive sensitivities for ω0 and Q0. Simulation results are obtained using PSPICE software which is in conformity with the theoretical findings.
文摘Basing on the state variable method, a block diagram of the current-mode biquad active circuit was proposed, whose integrators were realized using three kinds of active elements such as operational amplifier, second generation current conveyors and operational transconduc-tance amplifiers-electric capacity. The characteristics of each circuit were analyzed.
文摘A complete state variable current-mode biquadratic filter built by duo-output CCII (DOCCII) with variable current gain is presented. All the coefficients of the filter can be independently tuned through the variable current gain factors of the DOCCII. Based on the principles upon which the general biquadratic filter was constructed, a universal electronically tunable current-mode filter is proposed which implements the low-pass, high-pass, band-pass, band-suppress and all-pass second order transfer functions simultaneously. The PSPICE simulations of frequency responses of second-order filter of are also given.
基金Supported by the Shaanxi Provincial Key Research and Development Program,China(2018NY-158).
文摘In order to obtain the multiple-feedback filter with simpler structure and electronic control,this paper first derives nodal admittance matrix(NAM)equation of the multiple-feedback filter.Furthermore,in accordance with the pathological models of the operational transconductance amplifier(OTA)and second generation current-controlled conveyor(CCCII),the multiplefeedback filter based on OTAs and CCCIIs are respectively synthesized by the NAM expansion method.The filter employing three OTAs has eight equivalent realizations and the filter employing three CCCIIs has 16 equivalent realizations.24 different forms of the current-mode filters are synthesized in all.fo and Q of the synthesized filters can be tuned by tuning bias currents of the active elements.The hand analysis and computer analysis are included to support the method to be utilized.
