Cyclic oligomers of phenolphthalein polyarylene ether sulfone(ketone) were prepared through cyclo-depolymerisation of corresponding polymers using CsF as the catalyst in dipolar aprotic solvent DMAc and DMF, and a fam...Cyclic oligomers of phenolphthalein polyarylene ether sulfone(ketone) were prepared through cyclo-depolymerisation of corresponding polymers using CsF as the catalyst in dipolar aprotic solvent DMAc and DMF, and a family of macrocycles containing from dimer up to at least heptamer were confirmed by GPC, HPLC and MALDI-TOF-MS. The yields of cyclics get as high as 86.3% and 87.9% respectively.展开更多
A series of cyclic (arylene phosphonate) oligomers were prepared by reaction of phenylphosphonic dichloride (PPD) with various bisphenols under pseudo-high dilution conditions via interfacial polycondensation. The yie...A series of cyclic (arylene phosphonate) oligomers were prepared by reaction of phenylphosphonic dichloride (PPD) with various bisphenols under pseudo-high dilution conditions via interfacial polycondensation. The yield of cyclic (arylene phosphonate) oligomers is over 85% by using hexadecyltrimethylammoniun bromide as phase transfer catalyst (PTC) at 0 'C . The structures of the cyclic oligomers were confirmed by a combination of matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) and IR analysis. These cyclic oligomers undergo facile ring-opening polymerization in the melt by using potassium 4,4'-biphenoxide as the initiator to give linear polyphosphonate. Free-radical ring-opening polymerization of cyclic(arylene phosphonate) oligomers containing sulfur linkages was also performed in the melt using 2,2'-dithiobis(benzothiazole) (DTB) as the initiator at 270 °C and the resulting polymer had a Mw, of 8 × 103 with a molecular weight distribution of 4. Ring-opening copolymerization of these cyclic oligomers with cyclic carbonate oligomers was also achieved. The average molecular weight of the resulting copolymer is higher than the corresponding homopolymer and the thermal stability of the copolymer is better than the corresponding homopolymer.展开更多
Two kinds of macrocyclic oligomers containing aromatic sulfide linkages have been synthesized by the solution polycondensation in high yield. The cyclic compounds were characterized by H-1 and C-13 NMR, by and MALDI -...Two kinds of macrocyclic oligomers containing aromatic sulfide linkages have been synthesized by the solution polycondensation in high yield. The cyclic compounds were characterized by H-1 and C-13 NMR, by and MALDI - TOF MS.展开更多
Two kinds of cyclic aryl ester dimers have been synthesized by reaction of phthaloyl dichloride with bisphenols via interfacial polycondensation. The cyclic dimers readily undergo anionic ring-opening polymerization o...Two kinds of cyclic aryl ester dimers have been synthesized by reaction of phthaloyl dichloride with bisphenols via interfacial polycondensation. The cyclic dimers readily undergo anionic ring-opening polymerization or copolymerization in the melt by using sodium benzoate as the initiator, producing linear, high molecular weight polyesters. The contents of cyclic dimers in the homopolymers P1, P2, and copolymer P12 are 13.7%, 10.2%, 2.9%, respectively, which indicates that ring-opening copolymerization of cyclic dimers may impel the conversion of cyclic dimers and decrease the content of cyclic dimers in the resulting copolymer. Moreover, the isothermal chemorheology of the ring-opening copolymeriza- tion of cyclic dimers indicates that the reactive molten mixture has low shear viscosity and the viscosity increases slowly in the initial stage of ring-opening polymerization.展开更多
文摘Cyclic oligomers of phenolphthalein polyarylene ether sulfone(ketone) were prepared through cyclo-depolymerisation of corresponding polymers using CsF as the catalyst in dipolar aprotic solvent DMAc and DMF, and a family of macrocycles containing from dimer up to at least heptamer were confirmed by GPC, HPLC and MALDI-TOF-MS. The yields of cyclics get as high as 86.3% and 87.9% respectively.
基金This project was supported by the National Natural Science Foundation of China (No. 20084001).
文摘A series of cyclic (arylene phosphonate) oligomers were prepared by reaction of phenylphosphonic dichloride (PPD) with various bisphenols under pseudo-high dilution conditions via interfacial polycondensation. The yield of cyclic (arylene phosphonate) oligomers is over 85% by using hexadecyltrimethylammoniun bromide as phase transfer catalyst (PTC) at 0 'C . The structures of the cyclic oligomers were confirmed by a combination of matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) and IR analysis. These cyclic oligomers undergo facile ring-opening polymerization in the melt by using potassium 4,4'-biphenoxide as the initiator to give linear polyphosphonate. Free-radical ring-opening polymerization of cyclic(arylene phosphonate) oligomers containing sulfur linkages was also performed in the melt using 2,2'-dithiobis(benzothiazole) (DTB) as the initiator at 270 °C and the resulting polymer had a Mw, of 8 × 103 with a molecular weight distribution of 4. Ring-opening copolymerization of these cyclic oligomers with cyclic carbonate oligomers was also achieved. The average molecular weight of the resulting copolymer is higher than the corresponding homopolymer and the thermal stability of the copolymer is better than the corresponding homopolymer.
文摘Two kinds of macrocyclic oligomers containing aromatic sulfide linkages have been synthesized by the solution polycondensation in high yield. The cyclic compounds were characterized by H-1 and C-13 NMR, by and MALDI - TOF MS.
基金supported by grants from the National Natural Science Foundation of China(Nos.21001085,20904045)the Natural Science Foundation of Hubei Province(No.2010CDB11104)Doctoral Program Foundation of Wuhan Institute of Technology(No.11105032)
文摘Two kinds of cyclic aryl ester dimers have been synthesized by reaction of phthaloyl dichloride with bisphenols via interfacial polycondensation. The cyclic dimers readily undergo anionic ring-opening polymerization or copolymerization in the melt by using sodium benzoate as the initiator, producing linear, high molecular weight polyesters. The contents of cyclic dimers in the homopolymers P1, P2, and copolymer P12 are 13.7%, 10.2%, 2.9%, respectively, which indicates that ring-opening copolymerization of cyclic dimers may impel the conversion of cyclic dimers and decrease the content of cyclic dimers in the resulting copolymer. Moreover, the isothermal chemorheology of the ring-opening copolymeriza- tion of cyclic dimers indicates that the reactive molten mixture has low shear viscosity and the viscosity increases slowly in the initial stage of ring-opening polymerization.
