Lacunary silicotungstic heteropoly salts as high-performance catalysts in oxidation of cyclopentene

The development of polyoxometalates for olefin oxidation is critical to achieving the green chemical process of the C5 fraction further processing.Di-lacunary silicotungstic anions were easily obtained by continuously adjusting the p H instead of the traditional step-by-step method,which exhibited excellent performance in the catalytic oxidation of cyclopentene(CPE)to aldehydes or alcohols.The 93.69%CPE conversion and 97.15%total product selectivity(41.38%for glutaraldehyde(GA)and 55.77%for 1,2-cyclopentanediol(1,2-diol)were achieved by using H_(2)O_(2)as the oxidant and acetonitrile as the solvent.Through complementary characterization,it was found that the optimized di-lacunary silicotungstic polyoxometalate retained a complete Keggin structure,and exhibited better catalytic activity and stability than the mono-lacunary or saturated silicodecatungstate because it exposed more catalytic active centers.Furthermore,in situ FT-IR spectra was utilized to monitor the reaction process,revealing the formation of the active species W(O_(2))on the di-lacunary silicotungstic polyoxometalate and the intermediate epoxycyclopentane during the catalytic oxidation of cyclopentene.

Selective oxidation of cyclopentene with H2O2 by using H3PW12O40 and TBAB as a phase transfer catalyst

The selective oxidation of cyclopentene by aqueous H2O2 using H3PW12O40 and tetrabutyl ammonium bromide(TBAB) as a phase transfer catalyst has been investigated. The results show that the presence of TBAB significantly improved the oxidation selectivity of cyclopentene. The effects of the reaction conditions on the conversion of cyclopentene were investigated in detail. The optimal reaction conditions are as follows: the H3PW12O40 to TBAB molar ratio, 1:1–1:3;H3PW12O40 to cyclopentene molar ratio,0.54:100–0.64:100;and molar ratio of H2O2 to cyclopentene, 1.6:1. The conversion reached to 59.8% in 4h at 35.0 ℃, while the selectivity of glutaraldehyde was 38.0% and the selectivity of 1,2-cyclopentanediol was 55.6%. In addition, a route for oxidation of cyclopentene by aqueous H2O2 using a heteropoly acid and quaternary ammonium salt as a phase transfer catalyst was proposed.

Crystal Structure of 3, 4-trans-4, 5-trans-2-Amino-3-cyano-1, 3-diethyloxy carbonyl- 4, 5-di (4-chlorophenyl)cyclopentene

The crystal and molecular structure of 3,4-trans-4, 5-trans-2-amino-3cyano-1, 3-diethyloxy carbonyl-4, 5-di (4-chlorophenyl ) cyclopentene has been determined by X-ray diffraction method. The crystal (C24H22O4N2Cl2, Mr = 473. 35) ismonoclinic with space group P21/c, a= 6. 923(1), b= 33. 178(5), c= 10. 644 (3)β=99. 86(2)°, V=2408. 8(8) A3, Z= 4, Dc= 1. 305g/cm3,μ(MoKa) = 3. 01cm-1,F(000) =984, R=0. 052, Rw=0. 067 for 2147 observed reflections (I>3(I)). Thephenyl groups and the alkoxy carbonyl group are in equatorial positions. The phenylgroups form dihedral angles bf 70. 67 and 66. 74° with the central five-membered ring.

Characterization and reactivity of γ-Al2O3 supported Pd–Cu bimetallic nanocatalysts for the selective oxygenization of cyclopentene

In this work, Pd–Cu/γ-Al2O3 is prepared by the impregnation method and investigated for selective oxygenization of cyclopentene to cyclopentanone. A series of bimetallic Pd–Cu/γ-Al2O3 nanocatalysts were prepared and the structures characterized by XRD, XPS and TEM. We determined that the obtained Pd–Cu/γ-Al2O3（molar ratio Pd：Cu = 5：1） was an efficient catalyst for the oxygenization of cyclopentene to cyclopentanone with 95% selectivity and 85% conversion（100 °C, 1 MPa initial O2 pressure, 7 h）.

Highly Substituted Cyclopentenes Formation via a Stereose- lective Tandem CDC Reaction and Cyclization

A facile iron-catalyzed C（sp3）-C（sp2） bond formation through DDQ-mediated cross-dehydrogenative homo-coupling of （E）-1,2-diarylprop-1-enes for the synthesis of highly aryl-substituted cyclopentenes has been developed.

Convenient one-pot synthesis of functionalized cyclopentene via Sm/TMSCl/t-BuOH system mediated hydrodimerization cyclization of gem-diactivated alkene

Functionalized cyclopentenes could be prepared through Sm/TMSCl/t-BuOH mediated hydrodimerization cyclization of gem-diactivated alkene in one-pot at room temperature. The trans- or trans, transform isomer is in the majority and the major product was isolated from its stereoisomers through the fractional crystallization method.

Possible mechanism of 15D-PGJ2 in promoting periodontal tissue regeneration in patients with mandibular defects

Objective:To explore the main physiological mechanism of 15d-PGJ2 promoting periodontal tissue regeneration in patients with jaw defects caused by periodontal disease.Methods:From February 2016 to July 2019,a controlled study was conducted on 73 healthy residents(healthy group)and 73 patients(case group)with periodontal disease combined with jaw defects in Changsha medical university.T test was used to compare the growth factors of gingival crevicular fluid between the two groups.Peripheral blood cells;Cement-specific protein;Peripheral blood enzyme;Statistical differences in bone metabolites.The t test method compared the content of each index before and after treatment(15d-PGJ2 was treated at a dose of 200 mu/kg for 14 days).The method of factor analysis explores the internal correlation of each index.Result:RANKL,ICAM-1,TGF-β1,Th17,Treg,PDLSCs,SOST,CAP,HMGB1,CTSK,5-LOX,COX-2,NTX were higher in the case group than in the healthy group.In the case group,RANKL,ICAM-1,TGF-β1,Th17,Treg,PDLSCs,SOST,CAP,HMGB1,CTSK,5-LOX,COX-2,NTX were lower than those in the healthy group.The differences between the groups were statistically significant(P<0.05).Compared with before treatment,IL-1β,IL-17,Bfgf,YKL-40,BMP-2,ICTP,PICP,CTX were significantly decreased after treatment.RANKL,ICAM-1,TGF-β1,Th17,Treg,PDLSCs,SOST,CAP,HMGB1,CTSK,5-LOX,COX-2,NTX were significantly increased.The differences were statistically significant(P<0.05).Factor analysis shows that four common factors can be extracted from 21 indicators,and the cumulative contribution rate is 96.993%.Conclusions:The treatment of 15d-PGJ2 in patients with periodontal disease with maxillary defects can significantly affect the expression of multiple characteristic indicators,which may involve four mechanisms:dysregulation of cell differentiation or migration,local inflammation or immune imbalance,destruction of alveolar bone microstructure,load or stimulation,and remodeling.The specific pathway related to this is still to be further explored.

Characterization and reactivity of γ-Al_2O_3 supported Pd–Ni bimetallic nanocatalysts for selective hydrogenation of cyclopentadiene

Several γ-Al2O3 supported Pd-Ni bimetallic nanocatalysts （Pd-Ni （x：y）[Al2O3; where x and y represent the mass ratio of Pd and Ni, respectively） were prepared by the impregnation method and used for selective hydrogenation of cyclopentadiene to cyclopentene. The Pd-NiJAl2O3 samples were confirmed to generate Pd-Ni bimetallic nanoparticles by X-ray diffraction （XRD）, X-ray photoelectron spectroscopy （XPS） and transmission electron microscopy （TEM）. The catalytic activity was assessed in view of the effects of different mass ratios of Pd and Ni, temperature, pressure, etc. Among all the samples, the Pd-Ni （1：1 ）/Al2O3 （PN-1：1 ） catalyst showed extremely high catalytic ability. The conversion of cyclopentadiene and selectivity for cyclopentene can be simultaneously more than 90%.

Phosphine-Catalyzed Annulations between Modified Allylic Derivatives and Polar Dienes and Substituent Effect on the Annulation Mode

in this work, the phosphine-catalyzed annulation reactions between modified allylic derivatives and polar 1,1-dicyano-1,3-dienes have been studied. In the catalysis of PPh3 （20 mol%）, a [4 ＋ 1 ] annulation reaction is realized between a series of l,l-dicyano-2,4-diaryl-1,3-dienes and ethoxycarbonyl-activated allylic acetate, producing polysubstituted cyclopentenes in modest to excellent yields. It is also observed that the substituents of both 1,3-dienes and allylic derivatives have a significant influence on the annulation mode： under the catalysis of PPh3 or PBu3 （20 mol%）, regioselective [3 ＋ 2] annulation products are formed from differently substituted substratcs.