基于一维和三维CFD方法的四级径流式鼓风机扩压器和回流器设计与优化

Soft In Way Inc. performed the aerodynamic design of a 4 stages high pressure radial blower with vaneless diffusers and deswirlers for DMW Corporation in 2021. The nominal pressure ratio of the machine is near 2.Such a pressure ratio often characterizes what would typically be called a compressor, especially if the compression work is performed in one stage. For the subject machine of the present study, the compression work is split into 4 stages.This paper describes the design procedure for this blower, initially focusing in depth on the tradeoffs between work split,rotor diameter, and rotor vane back-sweep angle. The paper then presents a further design and optimization work of different variants of diffuser and deswirler based on aerodynamic performance for this 4 stages radial blower. The number of deswirler blades in the return channel was reduced from 19 to 10 in consideration of manufacturing requirements. To minimize losses in performance due to reduced blade number, several candidates of varied geometry shape deswirler blades were obtained from an automatic design and optimization workflow combining with 3D CFD calculation. All candidates of deswirler were implemented to the entire 4 stages radial blower to analyze machine performance by 3D CFD calculation and the best 10-blade deswirler geometry was determined. 3D CFD analysis shows that 10 blades of deswirler is unable to provide the same pressure rise and efficiency as the original design with 19 blades when all other parts of the design, such as rotor and diffuser are maintained the same. To further improve the blower performance, the similar automatic workflow was applied to study vaned diffuser influence to the blower performance based on the new blower configuration. The number and geometry of best diffuser blades was obtained from the automatic workflow and entire blower performance with vaned diffuser was analyzed and validated by 3D CFD calculation. After finalizing the aerodynamic flow path geometries and configuration of new blower design,performance for new blower and old one are predicted by 1D method with loss model correction and 3D CFD calculation. 1D and 3D CFD calculation results are compared and good agreement is achieved. Though, small discrepancy between them is noticed and reasons are analyzed. Furthermore, 3D CFD calculations with stall determination method based on several stall-indication metrics were performed to determine surge points of the 2 new blower configurations with vaned and vaneless diffuser. A future publication is intended to show the validation of the design with tested performance data.

Cortico-striatal gamma oscillations are modulated by dopamine D3 receptors in dyskinetic rats

Long-term levodopa administration can lead to the development of levodopa-induced dyskinesia.Gamma oscillations are a widely recognized hallmark of abnormal neural electrical activity in levodopa-induced dyskinesia.Currently,studies have reported increased oscillation power in cases of levodopa-induced dyskinesia.However,little is known about how the other electrophysiological parameters of gamma oscillations are altered in levodopa-induced dyskinesia.Furthermore,the role of the dopamine D3 receptor,which is implicated in levodopa-induced dyskinesia,in movement disorder-related changes in neural oscillations is unclear.We found that the cortico-striatal functional connectivity of beta oscillations was enhanced in a model of Parkinson’s disease.Furthermore,levodopa application enhanced cortical gamma oscillations in cortico-striatal projections and cortical gamma aperiodic components,as well as bidirectional primary motor cortex(M1)↔dorsolateral striatum gamma flow.Administration of PD128907(a selective dopamine D3 receptor agonist)induced dyskinesia and excessive gamma oscillations with a bidirectional M1↔dorsolateral striatum flow.However,administration of PG01037(a selective dopamine D3 receptor antagonist)attenuated dyskinesia,suppressed gamma oscillations and cortical gamma aperiodic components,and decreased gamma causality in the M1→dorsolateral striatum direction.These findings suggest that the dopamine D3 receptor plays a role in dyskinesia-related oscillatory activity,and that it has potential as a therapeutic target for levodopa-induced dyskinesia.

Determination of epristeride by its quenching effect on the fluorescence of L-tryptophan

A rapid, novel spectrofluorimetric method to determine epristeride （EP） in biological fluids and a pharmaceutical formulation was developed, based on the fact that fluorescence intensity of L-tryptophan could be quenched by EP in the medium of pH=9.0. The various factors influencing fluorescence quenching were discussed. The quenching mechanism was investigated with the quenching type, synchronous fluorescence spectra and quantum efficiency. Under the optimized conditions, fluorescence quenching value （AF^---FL_tryptophan--FEP_L_tryptophan） showed a good linear relationship with the EP concentration ranging from 0.4 to 12.0 lag/mL. The linearity, recovery and limit of detection demonstrated that the proposed method was suitable for EP determination in biological fluids and EP tablets. The method was successfully applied to the analysis of EP in real samples and the obtained results were in good agreement with the results of the official method.

Co-ordinated combination of Embden-Meyerhof-Parnas pathway and pentose phosphate pathway in Escherichia coli to promote L-tryptophan production

In this study,phosphoenolpyruvate and erythrose-4-phosphate are efficiently supplied by collaborative design of Embden-Meyerhof-Parnas(EMP)pathway and pentose phosphate(PP)pathway in Escherichia coli,thus increasing the L-tryptophan production.Firstly,the effects of disrupting EMP pathway on L-tryptophan production were studied,and the results indicated that the strain with deletion of phosphofructokinase A(i.e.,E.coli JW-5ΔpfkA)produced 23.4±2.1 g/L of L-tryptophan production.However,deletion of phosphofructokinase A and glucosephosphate isomerase is not conducive to glucose consumption and cell growth,especially deletion of glucosephosphate isomerase.Next,the carbon flux in PP pathway was enhanced by introduction of the desensitized glucose-6-phosphate dehydrogenase(zwf)and 6-phosphogluconate dehydrogenase(gnd)and thus increasing the L-tryptophan production(i.e.,26.5±3.2 g/L vs.21.7±1.3 g/L)without obviously changing the cell growth(i.e.,0.41 h^(-1) vs.0.44 h^(-1))as compared with the original strain JW-5.Finally,the effects of co-modifying EMP pathway and PP pathway on L-tryptophan production were investigated.It was found that the strain with deletion of phosphofructokinase A as well as introduction of the desensitized zwf and gnd(i.e.,E.coli JW-5 zwf243 gnd361ΔpfkA)produced 31.9±2.7 g/L of L-tryptophan,which was 47.0%higher than that of strain JW-5.In addition,the glucose consumption rate of strain JW-5 zwf243 gnd361ΔpfkA was obviously increased despite of the bad cell growth as compared with strain JW-5.The results of this study have important reference value for the following application of metabolic engineering to improve aromatic amino acids producing strains.

Prospects of 3D Printing Technology in Dental Medicine

With the continuous advancement of technology,the application of 3D printing technology in the field of dental medicine is becoming increasingly widespread.This article aims to explore the current applications and future potential of 3D printing technology in dental medicine and to analyze its benefits and challenges.It first introduces the current state of 3D printing technology in dental implants,crowns,bridges,orthodontics,and maxillofacial surgery.It then discusses the potential applications of 3D printing technology in oral tissue engineering,drug delivery systems,personalized dental prosthetics,and surgical planning.Finally,it analyzes the benefits of 3D printing technology in dental medicine,such as improving treatment accuracy and patient comfort,and shortening treatment times,while also highlighting the challenges faced,such as costs,material choices,and technical limitations.This article aims to provide a reference for professionals in the field of dental medicine and to promote the further application and development of 3D printing technology in this area.

The Effect of the Paleo Diet on People Suffering from Osteoporosis (Review Paper)

Osteoporosis is a disease that decreases bone mass and increases bone porosity, weakening bones. The Paleo diet is an eating plan that imitates the dietary patterns of the Stone Age. It excludes grains, dairy, and processed foods and emphasizes feeding on lean meats, fruits, vegetables, and nuts. Consumption of the Paleo diet has many positive sides, such as high protein intake and weight loss. Still, excluding dairy products risks calcium and vitamin D deficiencies, which are crucial for bone health. Statistics and simulations that have explored the relationship between the Paleo diet and bone health (especially for people suffering from low bone density) show mixed outcomes on bone health.). While the consumer does get lots of benefits from fruit and vegetable intake in a large sum due to them containing nutrients like magnesium, potassium, and vitamin K (which are also necessary for bone health), the lack of dairy products (gives the maximum amount of calcium and vitamin D) raises concerns about maintaining adequate bone mineral density (BMD). More information on this topic shows the negative impact of this diet on people suffering from osteoporosis due to a lack of nutrient intake that nourishes the bone. Although the Paleo diet can enhance overall health through nutrient-dense foods and reduced processed intake, it can’t be said the same for people suffering from osteoporosis.

Morphological Control of Gold Nanoparticles by Green Synthesis Using L-Tryptophan and Other Additives

This study focuses on shape-controlled synthesis of gold nanoparticles, using the green reducing agent L-Tryptophan(L-Trp), which is non-toxic and eco-friendly. This specific agent was investigated to realize certain morphology controlling effects by changing the relative growth rates among various crystal planes. Experimental samples were characterized by transmission electron microscope, UV-Vis spectrophotometer and X-ray diffraction(XRD) for size and morphological information. The effects of the specific additives of PVP((C_6 H_9 NO)_n), CTAB(C_(16)H_(33)(CH_3)_3 NBr), and KBr were examined for their morphological control individually and synergistically in this system. Hexagonal gold nanoparticles were successfully obtained via the PVP/CTAB and PVP/KBr systems. Particular amounts of PVP/KBr produced various polyhedron structures, such as cubes, and others with triangular and rhombic straight-side cross sections.

Conversion of L-Tryptophan into Melatonin Is the Possible Action Pathway Involved in the Effect of L-Tryptophan on Antidepressant-Related Behavior in Female Rats: Analysis of the Influence of Treatment Duration

The aim of this study was to determine the effect of pharmacological doses of melatonin (MEL) and L-tryptophan (L-TRP) on depression-like behavior in female rats submitted to the forced swimming test (FST) after 2, 4, 6 or 8 weeks of treatment. This will allow exploring the different mechanisms of L-TRP actions particularly that due to its conversion into MEL. For this purpose, four groups of 24 rats each were constituted;(Group 1: Control): received saline solution NaCl (0.9%), (Group 2: MEL4): received 4 mg/Kg of MEL, (Group 3: L-TRP4): received 4 mg/Kg of L-TRP and (Group 4: L-TRP20): received 20 mg/Kg of L-TRP. Animals of each group were distributed on 4 subgroups of 6 rats submitted to different time treatments. The duration of immobility (TIM) and struggling period (TST) of rats in FST were measured after 2, 4, 6 and 8 weeks of drug treatment and the effects of MEL and L-TRP were compared. Chronical administration of different doses of MEL or L-TRP failed to induce any anti-depressant activity in rats subjected to FST after 2 weeks of treatment. However, after 4 weeks, daily administration of MEL at 4 mg/Kg significantly reduced the immobility period and enhanced struggling time. After 6 weeks, MEL at 4 mg/Kg and L-TRP at 20 mg/Kg were both effective in reducing immobility and increasing struggling movement, their effects being statistically comparable. All treatments were able to significantly reduce immobility time and increase struggling duration after 8 weeks, but L-TRP at 4 mg/Kg was less potent than MEL and L-TRP at 20 g/Kg. The antidepressant-like activity of L-TRP was dose and time dependent, and that of MEL was time dependent. In conclusion, the study showed that at pharmacological doses, MEL and L-TRP have anti-depressant action, and such effect is dependent on time treatment;MEL?is more effective than L-TRP. In conclusion, L-TRP, through MEL, 5-HT or by itself could modulate aminergic neurotransmission in the different brain areas to ensure its behavioral effects.

Lipid-Polymer Membranes as Carriers for L-Tryptophan: Molecular and Metabolic Properties

Polymerized liposomes encapsulating L-tryptophan were studied with the aim to characterize them as drug delivery systems for the treatment of several metabolic diseases that need an increased systemic L-tryptophan concentration. polymerized liposomes were obtained by UV irradiation of vesicles containing 1,2-bis(10,12-tricosadiynoyl)-sn-glycero-3-phosphocholine (DC8,9PC) and 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) in a 1:1 molar ratio, in the presence of 10 and 50 mol% of L-tryptophan (respect to total lipid concentration). Polymerization efficiency was studied spectrophotometrically. Also, bilayer packing at the polar head region was followed with the Merocyanine 540 (MC540) and specific interactions in the lipopolymers were studied by FTIR. High L-tryptophan concentrations (50 mol% respect to total lipid concentration) induced a higher amount of six- and nine-unit polymers. This phenomenon was induced because the L-tryptophan located outside the lipid membrane was included in it during the polymerization process and was thus responsible for the better accommodate of the polar head region. This was not possible with the lower amount of L-tryptophan (10 mol%). The stability of lipopolymers with different amounts of L-tryptophan was studied through release profiles. Polymerized liposomes with 50 mol% of L-tryptophan were able to retain around 80% of the amino acid after 24 hours, whereas those with 10 mol % of the amino acid were able to retain 20%. The metabolic activity of the Caco-2 cell line was also studied. Cytotoxic effects were low in the presence of polymerized liposomes, rendering a maximum percentage of cell death of 30%. In summary, this work stresses the relevance of nonspecific drug-polymerized membrane binding on L-tryptophan pharmacological interaction with possible pharmaceutical applications in liposomal drug delivery. Moreover, the absence of significant cytotoxic effects allows the system proposed to be applied in human health.

Runout prediction of potential landslides based on the multi-source data collaboration analysis on historical cases

Long runout landslides involve a massive amount of energy and can be extremely hazardous owing to their long movement distance,high mobility and strong destructive power.Numerical methods have been widely used to predict the landslide runout but a fundamental problem remained is how to determine the reliable numerical parameters.This study proposes a framework to predict the runout of potential landslides through multi-source data collaboration and numerical analysis of historical landslide events.Specifically,for the historical landslide cases,the landslide-induced seismic signal,geophysical surveys,and possible in-situ drone/phone videos(multi-source data collaboration)can validate the numerical results in terms of landslide dynamics and deposit features and help calibrate the numerical(rheological)parameters.Subsequently,the calibrated numerical parameters can be used to numerically predict the runout of potential landslides in the region with a similar geological setting to the recorded events.Application of the runout prediction approach to the 2020 Jiashanying landslide in Guizhou,China gives reasonable results in comparison to the field observations.The numerical parameters are determined from the multi-source data collaboration analysis of a historical case in the region(2019 Shuicheng landslide).The proposed framework for landslide runout prediction can be of great utility for landslide risk assessment and disaster reduction in mountainous regions worldwide.

Phase II Clinical Study of Three-Dimensional Printed Coplanar Template Combined with CT-Guided Percutaneous Core Needle Biopsy of Pulmonary Nodules in Elderly Patients

Background: As the population age structure gradually ages, more and more elderly people were found to have pulmonary nodules during physical examinations. Most elderly people had underlying diseases such as heart, lung, brain and blood vessels and cannot tolerate surgery. Computed tomography (CT)-guided percutaneous core needle biopsy (CNB) was the first choice for pathological diagnosis and subsequent targeted drugs, immune drugs or ablation treatment. CT-guided percutaneous CNB requires clinicians with rich CNB experience to ensure high CNB accuracy, but it was easy to cause complications such as pneumothorax and hemorrhage. Three-dimensional (3D) printing coplanar template (PCT) combined with CT-guided percutaneous pulmonary CNB biopsy has been used in clinical practice, but there was no prospective, randomized controlled study. Methods: Elderly patients with lung nodules admitted to the Department of Oncology of our hospital from January 2019 to January 2023 were selected. A total of 225 elderly patients were screened, and 30 patients were included after screening. They were randomly divided into experimental group (Group A: 30 cases) and control group (Group B: 30 cases). Group A was given 3D-PCT combined with CT-guided percutaneous pulmonary CNB biopsy, Group B underwent CT-guided percutaneous pulmonary CNB. The primary outcome measure of this study was the accuracy of diagnostic CNB, and the secondary outcome measures were CNB time, number of CNB needles, number of pathological tissues and complications. Results: The diagnostic accuracy of group A and group B was 96.67% and 76.67%, respectively (P = 0.026). There were statistical differences between group A and group B in average CNB time (P = 0.001), number of CNB (1 vs more than 1, P = 0.029), and pathological tissue obtained by CNB (3 vs 1, P = 0.040). There was no statistical difference in the incidence of pneumothorax and hemorrhage between the two groups (P > 0.05). Conclusions: 3D-PCT combined with CT-guided percutaneous CNB can improve the puncture accuracy of elderly patients, shorten the puncture time, reduce the number of punctures, and increase the amount of puncture pathological tissue, without increasing pneumothorax and hemorrhage complications. We look forward to verifying this in a phase III randomized controlled clinical study. .

Numerical three-dimensional modeling of earthen dam piping failure

A physically-based numerical three-dimensional earthen dam piping failure model is developed for homogeneous and zoned soil dams.This model is an erosion model,coupled with force/moment equilibrium analyses.Orifice flow and two-dimensional(2D)shallow water equations(SWE)are solved to simulate dam break flows at different breaching stages.Erosion rates of different soils with different construction compaction efforts are calculated using corresponding erosion formulae.The dam's real shape,soil properties,and surrounding area are programmed.Large outer 2D-SWE grids are used to control upstream and downstream hydraulic conditions and control the boundary conditions of orifice flow,and inner 2D-SWE flow is used to scour soil and perform force/moment equilibrium analyses.This model is validated using the European Commission IMPACT(Investigation of Extreme Flood Processes and Uncertainty)Test#5 in Norway,Teton Dam failure in Idaho,USA,and Quail Creek Dike failure in Utah,USA.All calculated peak outflows are within 10%errors of observed values.Simulation results show that,for a V-shaped dam like Teton Dam,a piping breach location at the abutment tends to result in a smaller peak breach outflow than the piping breach location at the dam's center;and if Teton Dam had broken from its center for internal erosion,a peak outflow of 117851 m'/s,which is 81%larger than the peak outflow of 65120 m3/s released from its right abutment,would have been released from Teton Dam.A lower piping inlet elevation tends to cause a faster/earlier piping breach than a higher piping inlet elevation.

Mathematical Wave Functions and 3D Finite Element Modelling of the Electron and Positron

The wave/particle duality of particles in Physics is well known. Particles have properties that uniquely characterize them from one another, such as mass, charge and spin. Charged particles have associated Electric and Magnetic fields. Also, every moving particle has a De Broglie wavelength determined by its mass and velocity. This paper shows that all of these properties of a particle can be derived from a single wave function equation for that particle. Wave functions for the Electron and the Positron are presented and principles are provided that can be used to calculate the wave functions of all the fundamental particles in Physics. Fundamental particles such as electrons and positrons are considered to be point particles in the Standard Model of Physics and are not considered to have a structure. This paper demonstrates that they do indeed have structure and that this structure extends into the space around the particle’s center (in fact, they have infinite extent), but with rapidly diminishing energy density with the distance from that center. The particles are formed from Electromagnetic standing waves, which are stable solutions to the Schrödinger and Classical wave equations. This stable structure therefore accounts for both the wave and particle nature of these particles. In fact, all of their properties such as mass, spin and electric charge, can be accounted for from this structure. These particle properties appear to originate from a single point at the center of the wave function structure, in the same sort of way that the Shell theorem of gravity causes the gravity of a body to appear to all originate from a central point. This paper represents the first two fully characterized fundamental particles, with a complete description of their structure and properties, built up from the underlying Electromagnetic waves that comprise these and all fundamental particles.

An Improved Coupled Level Set and Continuous Moment-of-Fluid Method for Simulating Multiphase Flows with Phase Change

An improved algorithm for computing multiphase flows is presented in which the multimaterial Moment-of-Fluid(MOF)algorithm for multiphase flows,initially described by Li et al.(2015),is enhanced addressing existing MOF difficulties in computing solutions to problems in which surface tension forces are crucial for understanding salient flow mechanisms.The Continuous MOF(CMOF)method is motivated in this article.The CMOF reconstruction method inherently removes the"checkerboard instability"that persists when using the MOF method on surface tension driven multiphase(multimaterial)flows.The CMOF reconstruction algorithm is accelerated by coupling the CMOF method to the level set method and coupling the CMOF method to a decision tree machine learning(ML)algorithm.Multiphase flow examples are shown in the two-dimensional(2D),three-dimensional(3D)axisymmetric"RZ",and 3D coordinate systems.Examples include two material and three material multiphase flows:bubble formation,the impingement of a liquid jet on a gas bubble in a cryogenic fuel tank,freezing,and liquid lens dynamics.

酶法制备γ-D-glutamyl-L-tryptophan的动力学模型

以酶法合成γ-D-glutamyl-L-tryptophan(γ-D-Glu-L-Trp)为研究体系,采用D-谷氨酰胺为γ-谷氨酰基供体,L-色氨酸为受体,测定得到了转肽反应的米氏常数(Km)为5.11mmol.L-1,催化常数(Kcat)为3.92mmol.min-1,γ-D-Glu-L-Trp的水解反应米氏常数(K′m)为2.31mmol.L-1,催化常数(K′cat)为1.46mmol.min-1。采用顺序反应机制建立了酶法制备γ-D-Glu-L-Trp的过程动力学模型,并进行了参数优化。经验证,所建模型可准确预测该体系中的反应进程,模型数值解与实验值的平均相对误差小于5%。

A Review: Manufacturing, and Properties of the D-Fructose Epimer D-Allulose (D-Psicose)

D-allulose, also known by the name D-psicose or just allulose, is a rare keto-sugar epimer of D-fructose in the third carbon (C3), and naturally occurs in small quantity in fruits such as grapes and figs. It is low calorie sweetener produced enzymatically from D-fructose by enzymes D-ketose 3-epimerase (DKEase) family. D-allulose has a similar taste, texture and functionality as sweetener comparing to high calorie sweetener sugar table sucrose. D-allulose is poorly metabolized in the body with minimal impact on blood sugar levels making it a natural low-calorie sweetener. This property makes D-allulose an attractive sweetener for diabetes and for body weight management. Laboratory studies on D-allulose intake demonstrated its safety with no significant adverse effects. United States Food and Drug Administration (FDA) has granted D-allulose the status of Generally Recognized as Safe (GRAS). Plus, it is considered safe for human consumption by regulatory organizations in other countries except in European Union due to their request for further laboratory testing. Maximum acceptable daily intake of D-allulose is 0.9 grams per kilogram body weight. Excessive intake for more than the recommended daily intake could lead to some side effects such as gastrointestinal discomfort or laxative effects. In general, D-allulose is considered one of the preferred natural low calories sweeteners for those seeking an alternative to table sugar sucrose.

Three-dimensional(3D)parametric measurements of individual gravels in the Gobi region using point cloud technique

Gobi spans a large area of China,surpassing the combined expanse of mobile dunes and semi-fixed dunes.Its presence significantly influences the movement of sand and dust.However,the complex origins and diverse materials constituting the Gobi result in notable differences in saltation processes across various Gobi surfaces.It is challenging to describe these processes according to a uniform morphology.Therefore,it becomes imperative to articulate surface characteristics through parameters such as the three-dimensional(3D)size and shape of gravel.Collecting morphology information for Gobi gravels is essential for studying its genesis and sand saltation.To enhance the efficiency and information yield of gravel parameter measurements,this study conducted field experiments in the Gobi region across Dunhuang City,Guazhou County,and Yumen City(administrated by Jiuquan City),Gansu Province,China in March 2023.A research framework and methodology for measuring 3D parameters of gravel using point cloud were developed,alongside improved calculation formulas for 3D parameters including gravel grain size,volume,flatness,roundness,sphericity,and equivalent grain size.Leveraging multi-view geometry technology for 3D reconstruction allowed for establishing an optimal data acquisition scheme characterized by high point cloud reconstruction efficiency and clear quality.Additionally,the proposed methodology incorporated point cloud clustering,segmentation,and filtering techniques to isolate individual gravel point clouds.Advanced point cloud algorithms,including the Oriented Bounding Box(OBB),point cloud slicing method,and point cloud triangulation,were then deployed to calculate the 3D parameters of individual gravels.These systematic processes allow precise and detailed characterization of individual gravels.For gravel grain size and volume,the correlation coefficients between point cloud and manual measurements all exceeded 0.9000,confirming the feasibility of the proposed methodology for measuring 3D parameters of individual gravels.The proposed workflow yields accurate calculations of relevant parameters for Gobi gravels,providing essential data support for subsequent studies on Gobi environments.

Vitamin D and selenium for type 2 diabetes mellitus with Hashimoto’s thyroiditis:Dosage and duration insights

This letter discusses the publication by Feng et al.Iodine,selenium,and vitamin D are closely associated with thyroid hormone production in humans;however,the efficacy of selenium and vitamin D supplementation for type 2 diabetes mellitus(T2DM)patients with Hashimoto’s thyroiditis(HT)remains controversial.In the retrospective study we discuss herein,the authors highlighted significant improvements in thyroid function,thyroid antibodies,blood glucose,and blood lipid in T2DM patients with HT following addition of vitamin D and selenium to their antidiabetic regimens,underscoring the value of these supplements.Our team is currently engaged in research exploring the relationship between micronutrients and HT,and we have obtained invaluable insights from the aforementioned study.Based on this research and current literature,we recommend a regimen of 4000 IU/day of vitamin D and 100-200μg/day of selenium for over three months to six months for patients with HT,particularly for those with concurrent T2DM.

Databases of 2D material-substrate interfaces and 2D charged building blocks

Discovery of materials using“bottom-up”or“top-down”approach is of great interest in materials science.Layered materials consisting of two-dimensional(2D)building blocks provide a good platform to explore new materials in this respect.In van der Waals(vdW)layered materials,these building blocks are charge neutral and can be isolated from their bulk phase(top-down),but usually grow on substrate.In ionic layered materials,they are charged and usually cannot exist independently but can serve as motifs to construct new materials(bottom-up).In this paper,we introduce our recently constructed databases for 2D material-substrate interface(2DMSI),and 2D charged building blocks.For 2DMSI database,we systematically build a workflow to predict appropriate substrates and their geometries at substrates,and construct the 2DMSI database.For the 2D charged building block database,1208 entries from bulk material database are identified.Information of crystal structure,valence state,source,dimension and so on is provided for each entry with a json format.We also show its application in designing and searching for new functional layered materials.The 2DMSI database,building block database,and designed layered materials are available in Science Data Bank at https://doi.org/10.57760/sciencedb.j00113.00188.

Metabolic disorders in prediabetes:From mechanisms to therapeutic management

Diabetes,one of the world's top ten diseases,is known for its high mortality and complication rates and low cure rate.Prediabetes precedes the onset of diabetes,during which effective treatment can reduce diabetes risk.Prediabetes risk factors include high-calorie and high-fat diets,sedentary lifestyles,and stress.Consequences may include considerable damage to vital organs,including the retina,liver,and kidneys.Interventions for treating prediabetes include a healthy lifestyle diet and pharmacological treatments.However,while these options are effective in the short term,they may fail due to the difficulty of long-term implementation.Medications may also be used to treat prediabetes.This review examines prediabetic treatments,particularly metformin,glucagon-like peptide-1 receptor agonists,sodium glucose cotransporter 2 inhibitors,vitamin D,and herbal medicines.Given the remarkable impact of prediabetes on the progression of diabetes mellitus,it is crucial to intervene promptly and effectively to regulate prediabetes.However,the current body of research on prediabetes is limited,and there is considerable confusion surrounding clinically relevant medications.This paper aims to provide a comprehensive summary of the pathogenesis of prediabetes mellitus and its associated therapeutic drugs.The ultimate goal is to facilitate the clinical utilization of medications and achieve efficient and timely control of diabetes mellitus.