Recent Progresses of the DAMPE Mission

The DArk Matter Particle Explorer(DAMPE)is a space high-energy particle andγ-ray detector whose major scientific goals are the indirect detection of dark matter particles,the origin of cosmic rays and highenergyγ-ray astronomy.Since its successful launch in December 2015,the DAMPE has been operated smoothly in orbit for more than 8 years.The direct measurements of the boron-to-carbon and boron-to-oxygen flux ratios,and the proton+Helium spectrum up to 316 TeV have been obtained,revealing new spectral features with very high significances.The search results ofγ-ray spectral line and fractionally charged particles indicate a good potential of DAMPE for indirect dark matter detection and new physical discovery in space.The DAMPE measurements are expected to significantly advance our understanding of the fundamental problems in astroparticle physics.

ON THE CAUCHY PROBLEM FOR THE GENERALIZED BOUSSINESQ EQUATION WITH A DAMPED TERM

This paper is devoted to the Cauchy problem for the generalized damped Boussinesq equation with a nonlinear source term in the natural energy space.With the help of linear time-space estimates,we establish the local existence and uniqueness of solutions by means of the contraction mapping principle.The global existence and blow-up of the solutions at both subcritical and critical initial energy levels are obtained.Moreover,we construct the sufficient conditions of finite time blow-up of the solutions with arbitrary positive initial energy.

A reweighted damped singular spectrum analysis method for robust seismic noise suppression

(Multichannel)Singular spectrum analysis is considered as one of the most effective methods for seismic incoherent noise suppression.It utilizes the low-rank feature of seismic signal and regards the noise suppression as a low-rank reconstruction problem.However,in some cases the seismic geophones receive some erratic disturbances and the amplitudes are dramatically larger than other receivers.The presence of this kind of noise,called erratic noise,makes singular spectrum analysis(SSA)reconstruction unstable and has undesirable effects on the final results.We robustify the low-rank reconstruction of seismic data by a reweighted damped SSA(RD-SSA)method.It incorporates the damped SSA,an improved version of SSA,into a reweighted framework.The damping operator is used to weaken the artificial disturbance introduced by the low-rank projection of both erratic and random noise.The central idea of the RD-SSA method is to iteratively approximate the observed data with the quadratic norm for the first iteration and the Tukeys bisquare norm for the rest iterations.The RD-SSA method can suppress seismic incoherent noise and keep the reconstruction process robust to the erratic disturbance.The feasibility of RD-SSA is validated via both synthetic and field data examples.

Near resonance vibration isolation on a levered-dual response(LEDAR)Coulomb-damped system by differential preloads/offsets in linear springs

The levered-dual response(LEDAR)Coulomb-damped system attains near resonant vibration isolation by differential preloads/offsets in linear springs.It takes the advantages of both the preloads/offsets in linear springs and the guiderail friction for realizing different levels of vibration isolation.The isolation capacities are investigated on the strategies with both the horizontal and vertical guiderails,with the horizontal rail only,and without guiderails.The compressive preloads generally result in the consumption of most of the initial excitation energy so as to overcome the potential threshold.The isolation onsets at the frequency ratio of 1∓0.095 on the left-hand side(LHS)and the right-hand side(RHS)of the lever are relative to the load plate connector.The observed near resonant isolation thus makes the LEDAR system a candidate for the isolation of the mechanical systems about resonance while opening a path for simultaneous harvesterisolation functions and passive functions at extreme frequencies.

The Extended Non-Elementary Amplitude Functions as Solutions to the Damped Pendulum Equation, the Van der Pol Equation, the Damped Duffing Equation, the Lienard Equation and the Lorenz Equations

In this paper, we define some non-elementary amplitude functions that are giving solutions to some well-known second-order nonlinear ODEs and the Lorenz equations, but not the chaos case. We are giving the solutions a name, a symbol and putting them into a group of functions and into the context of other functions. These solutions are equal to the amplitude, or upper limit of integration in a non-elementary integral that can be arbitrary. In order to define solutions to some short second-order nonlinear ODEs, we will make an extension to the general amplitude function. The only disadvantage is that the first derivative to these solutions contains an integral that disappear at the second derivation. We will also do a second extension: the two-integral amplitude function. With this extension we have the solution to a system of ODEs having a very strange behavior. Using the extended amplitude functions, we can define solutions to many short second-order nonlinear ODEs.

An internally damped inertial platform for marine gravimetry and a test case in the South China Sea

To dampen periodic off-levelling motions within an inertial platform while undergoing horizontal accelerations of the same period and to achieve a levelling accuracy of a few tens of arcseconds with that system,an internally damped inertial platform for a marine scalar gravity system was the developed.Methods for attenuating horizontal acceleration and reducing off-levelling error by a satisfactory gyro-levelling loop,which are fundamental to the internally damped inertial platform,were designed and implemented.In addition,phase delays are introduced by the levelling loop.The resulting off-levelling gravity errors were analyzed and modeled.A series of tests on a motion simulator were performed in laboratory for a variety of simulated sea conditions.We found that the motion of the platform is a function of the amplitude and period of the simulated ship motions and ranges between 10 and 40 arcseconds.In addition,the phase lag between platform motion and ship motion is not constant but ranges 180°-270°,depending on the period and amplitude of the motion.Then,the platform,on which a gravimeter was mounted,was installed on the R/V Shiyan 2 to conduct a gravity survey in the South China Sea.Despite rough sea conditions,it was shown that in short periods of 2-30 s,the off-levelling angle was less than 30 arcseconds,and the phase lagged the horizontal acceleration by 230°-260°.From a repeated survey line and intersecting survey points,the estimated errors of gravity measurements were between 1.3 and 1.7 mGal.The marine measurements results were compared with those of satellite altimetry data and show a mean value of 0.5 mGal in a standard deviation of 1.5 mGal.

Equivalent damping of SDOF structure with Maxwell damper

To predict the maximum earthquake response of an SDOF structure with a Maxwell fluid damper or supplemental brace-viscous damper system using the seismic design response spectrum technique,a new approach is presented to determine the first-and second-order equivalent viscous damping and stiffness,the peak responses,and the damper force of the above structure.Based on the fact that the dynamic characteristics of a general linear viscoelastically damped structure are fully determined by its free vibration properties and the relaxation time constants of a Maxwell fluid damper and supplemental brace-viscous damper system in engineering practice are all small,the method of improved multiple time scales and the equivalent criterion in which all free vibration properties are the same are used to obtain the first-and second-order equivalent viscous damping and stiffness of the above structure in closed form.The accuracy of the proposed method is higher and significantly better than that of the modal strain energy method.Furthermore,in the parametric range of the requirements of the Chinese ＂Code for Seismic Design of Buildings＂,the error of the proposed second-order equivalent system for the abovementioned engineering structure is not more than 0.5%.

An abnormal carbody swaying of intercity EMU train caused by low wheel-rail equivalent conicity and damping force unloading of yaw damper

Low-frequency carbody swaying phenomenon often occurs to railway vehicles due to hunting instability,which seriously deteriorates the ride comfort of passengers.This paper investigates low-frequency carbody swaying through experimental analysis and numerical simulation.In the tests,the carbody acceleration,the wheel-rail profiles,and the dynamic characteristics of dampers were measured to understand the characteristics of the abnormal carbody vibration and to find out its primary contributor.Linear and nonlinear numerical simulations on the mechanism and optimization measures were carried out to solve this carbody swaying issue.The results showed that the carbody swaying is the manifest of carbody hunting instability.The low equivalent conicity and the decrease of dynamic damping of the yaw damper are probably the cause of this phenomenon.The optimization measures to increase the equivalent conicity and dynamic damping of the yaw damper were put forward and verified by on-track tests.The results of this study could enrich the knowledge of carbody hunting and provide a reference for solving abnormal carbody vibrations.

THE ANALYTICAL APPROACH FOR LARGE SCALE NON-CLASSICALLY DAMPED DYNAMIC SYSTEM

This paper gives a dynamic decoupling approach for the analysis of large scale non-classically damped system, in which the complex variable computations were completely avoided not only in solving for the eigenvalue problem but also in the calculation of the dynamic response. The analytical approaches for undamped gyroscopic system, non-classically damped system, including the damped gyroscopic system were unified. Very interesting and useful theoretical results, practical algorithms were obtained which are applicable to both non-defective and defective systems.

The Effect of Mass Ratio and Air Damper Characteristics on the Resonant Response of an Air Damped Dynamic Vibration Absorber

In this paper, it is shown that, a road vehicle 2DOF air damped quartercar suspension system can conveniently be transformed into a 2DOF air damped vibrating system representing an air damped dynamic vibration absorber (DVA) with an appropriate change in the ratio μ of the main mass and the absorber mass i.e. when mass ratio μ >> 1. Also the effect of variation of the mass ratio, air damping ratio and air spring rate ratio, on the motion transmissibility at the resonant frequency of the main mass of the DVA has been dis- cussed. It is shown that, as the air damping ratio in the absorber system increases, there is a substantial decrease in the motion transmissibility of the main mass system where the air damper has been modeled as a Maxwell type. Optimal value of the air damping ratio for the minimum motion transmissibility of the main mass of the system has been determined. An experimental setup has been designed and developed with a control system to vary air pressure in the damper in the absorber system. The motion transmissibility characteristics of the main mass system have been obtained, and the optimal value of the air damping ratio has been determined for minimum motion transmissibility of the main mass of the

Feasibility study of a large-scale tuned mass damper with eddy current damping mechanism

Tuned mass dampers （TMDs） have been widely used in recent years to mitigate structural vibration. However, the damping mechanisms employed in the TMDs are mostly based on viscous dampers, which have several well-known disadvantages, such as oil leakage and difficult adjustment of damping ratio for an operating TMD. Alternatively, eddy current damping （ECD） that does not require any contact with the main structure is a potential solution. This paper discusses the design, analysis, manufacture and testing of a large-scale horizontal TMD based on ECD. First, the theoretical model of ECD is formulated, then one large-scale horizontal TMD using ECD is constructed, and finally performance tests of the TMD are conducted. The test results show that the proposed TMD has a very low intrinsic damping ratio, while the damping ratio due to ECD is the dominant damping source, which can be as large as 15% in a proper configuration. In addition, the damping ratios estimated with the theoretical model are roughly consistent with those identified from the test results, and the source of this error is investigated. Moreover, it is demonstrated that the damping ratio in the proposed TMD can be easily adjusted by varying the air gap between permanent magnets and conductive plates. In view of practical applications, possible improvements and feasibility considerations for the proposed TMD are then discussed. It is confirmed that the proposed TMD with ECD is reliable and feasible for use in structural vibration control.

Damping characteristics of friction damped braced frame and its effectiveness in the mega-sub controlled structure system

Based on energy dissipation and structural control principle, a new structural configuration, called the megasub controlled structure （MSCS） with friction damped braces （FDBs）, is first presented. Meanwhile, to calculate the damping coefficient in the slipping state a new analytical method is proposed. The damping characteristics of one-storey friction damped braced frame （FDBF） are investigated, and the influence of the structural parameters on the energy dissipation and the practical engineering design are discussed. The nonlinear dynamic equations and the analytical model of the MSCS with FDBs are established. Three building structures with different structural configurations, which were designed with reference to the conventional mega-sub structures such as used in Tokyo City Hall, are comparatively investigated. The results illustrate that the structure presented in the paper has excellent dynamic properties and satisfactory control effectiveness.

Dynamic characteristics of a novel damped outrigger system

This paper presents exact analytical solutions for a novel damped outrigger system, in which viscous dampers are vertically installed between perimeter columns and the core of a high-rise building. An improved analytical model is developed by modeling the effect of the damped outrigger as a general rotational spring acting on a Bernoulli-Euler beam. The equivalent rotational spring stiffness incorporating the combined effects of dampers and axial stiffness of perimeter columns is derived. The dynamic stiffness method(DSM) is applied to formulate the governing equation of the damped outrigger system. The accuracy and effi ciency are verifi ed in comparison with those obtained from compatibility equations and boundary equations. Parametric analysis of three non-dimensional factors is conducted to evaluate the infl uences of various factors, such as the stiffness ratio of the core to the beam, position of the damped outrigger, and the installed damping coeffi cient. Results show that the modal damping ratio is signifi cantly infl uenced by the stiffness ratio of the core to the column, and is more sensitive to damping than the position of the damped outrigger. The proposed analytical model in combination with DSM can be extended to the study of structures with more outriggers.

SEMI-ACTIVE CONTROL OF VEHICLE SUSPENSION WITH MAGNETO-RHEOLOGICAL DAMPERS:PART Ⅰ——CONTROLLER SYNTHESIS AND EVALUATION

A modified skyhook-based semi-active controller is proposed for implementing an asymmetric control suspension design with symmetric magneto-rheological （MR） dampers. The controller is formulated in current form, which is modulated by integrating a continuous modulation and an asymmetric damping force generation algorithms, so as to effectively minimize switching and hysteretic effects from the MR-damper. The proposed controller is implemented with a quarter-vehicle MR-suspension model, and its relative response characteristics are thus evaluated in terms of defined performance measures under varying amplitude harmonic, rounded pulse and random excitations. The sensitivity of the semi-active suspension performance to variations in controller parameters is thoroughly evaluated. The results illustrate that the proposed skyhook-based asymmetric semi-active MR-suspension controller has superior robustness on the system parameter variations, and can achieve desirable multi-objective suspension performance.

Experimental and analytical studies on multiple tuned mass dampers for seismic protection of porcelain electrical equipment

Porcelain electrical equipment （PEE）, such as current transformers, is critical to power supply systems, but its seismic performance during past earthquakes has not been satisfactory. This paper studies the seismic performance of two typical types of PEE and proposes a damping method for PEE based on multiple tuned mass dampers （MTMD）. An MTMD damping device involving three mass units, named a triple tuned mass damper （TTMD）, is designed and manufactured. Through shake table tests and finite element analysis, the dynamic characteristics of the PEE are studied and the effectiveness of the MTMD damping method is verified. The adverse influence of MTMD redundant mass to damping efficiency is studied and relevant equations are derived. MTMD robustness is verified through adjusting TTMD control frequencies. The damping effectiveness of TTMD, when the peak ground acceleration far exceeds the design value, is studied. Both shake table tests and finite element analysis indicate that MTMD is effective and robust in attenuating PEE seismic responses. TTMD remains effective when the PGA far exceeds the design value and when control deviations are considered.

SEMI-ACTIVE CONTROL OF VEHICLE SUSPENSION WITH MAGNETO-RHEOLOGICAL DAMPERS PARTⅡ——EVALUATION OF SUSPENSION PERFORMANCE

The design and analysis of an intelligent vehicle suspension with MR dampers should address hybrid semi-active control goals, such as rejection of current-switching discontinuity and MR-damper hysteresis, asymmetric damping from the symmetric MR-damper design, robustness on the vehicle operation parameter uncertainties and consideration of essential multiple suspension goals. Following the proposed skyhook-based asymmetric semi-active controller （Part I ） for achieving the above goals, herein, a set of suspension performance measures and three kinds of varying amplitude harmonic, rounded pulse and really measured random excitations are systematically defined, and the sensitivity of quarter-vehicle MR-suspension performance to variations in operating conditions is thoroughly analyzed. The results illustrate that the proposed skyhook-based semi-active MR-suspension in the asymmetric mode yields relatively superior dynamic responses to meet the multiple suspension performances of ride, rattle space, road-holding and dynamic tire force transmitted to the pavement, and has desirable robustness on variations in operating conditions of vehicle load and speed and the road roughness.

STUDY ON ELECTRORHEOLOGICAL FLUID DAMPER FOR APPLICATION IN MACHINING CHATTER CONTROL

The electrorheological fluid(ERF)is a kind of intelligent material withbright prospects for industry applications, which has viscoelastic characteristic under the appliedelectric field. The dynamic model of a milling system with an ERF damper is established, and thechaffer suppression mechanism of the ER effect is discussed theoretically. Both the theoreticalstudy and the experimental investigation show that the additional damping and additional stiffnessproduced by the ERF increase with the rise in the strength of electric field E, but their influenceon the cuffing stability is different. Only when both additional damping and additional stiffnesscooperate, the milling chatter can be suppressed quickly and effectively. In additional, an ERFdamper used on the arbor of horizontal spindle milling machine is developed, and a series of millingchatter control experiments are performed. The experimental results show that the milling chaffercan be suppressed effectively by using the ER damper.

GLOBAL SOLUTIONS AND FINITE TIME BLOW UP FOR DAMPED KLEIN-GORDON EQUATION

We study the Cauchy problem of strongly damped Klein-Gordon equation. Global existence and asymptotic behavior of solutions with initial data in the potential well are derived. Moreover, not only does finite time blow up with initial data in the unstable set is proved, but also blow up results with arbitrary positive initial energy are obtained.

A hybrid inversion method of damped least squares with simulated annealing used for Rayleigh wave dispersion curve inversion

Surface wave methods are becoming increasingly popular in many geotechnical applications and in earthquake seismology due to their noninvasive characteristics.Inverse surface wave dispersion curves are a crucial step in most surface wave methods.Many inversion methods have been applied to surface wave dispersion curve inversion,including linearized inversion and nonlinearized inversion methods.In this study,a hybrid inversion method of Damped Least Squares(DLS) with Very Fast Simulated Annealing(VFSA) is developed for multi-mode Rayleigh wave dispersion curve inversion.Both synthetic and in situ fi eld data were used to verify the validity of the proposed method.The results show that the proposed method is superior to the conventional VFSA method in aiming at global minimum,especially when parameter searching space is adjacent to real values of the parameters.The advantage of the new method is that it retains both the merits of VFSA for global search and DLS for local search.At high temperatures,the global search dominates the runs,while at a low temperatures,the local search dominates the runs.Thus,at low temperatures,the proposed method can almost directly approach the actual model.

Optimum placement and characteristics of velocity-dependent dampers under seismic excitation

In this study, through novel drift-based equations of motion in the frequency domain, optimum placement and characteristics of linear velocity-dependent dampers are investigated. In this study, the sum of the square of the absolute values of transfer matrix elements for interstory drifts is considered as the optimization index. Optimum placement and characteristics of dampers are simultaneously obtained by minimizing the optimization index through an incremental procedure. In each step of the procedure, a predefined value is considered as the damper characteristic. The optimum story for this increment is selected such that it leads to a minimum value for the optimization index. The procedure is repeated for the next increments until the optimization index meets its target value, which is obtained according to the desired damping ratio for the overall structure. In other words, the desired overall damping ratio is the input to the proposed procedure, and the optimal placement and characteristics of the dampers are its output. It is observed that the optimal placement of a velocitydependent damper depends on the damping coefficient of the added damper, frequency of the excitation, and distribution of the mass, stiffness, and inherent damping of the main structure.