Research on a Novel Inverter Based on DC/DC Converter Topology

The conventional inverters have the shortcomings of straightway conduction in transistors and the difficulty of realizing soft swit￣ching. A novel inverter based on the DC/DC converter topology is presented. The inverter is comprised of a combined Buck/Boost DC/DC converter and a bridge circuit. The front stage converter is controlled to output variable DC voltage and the bridge circuit is used to convert the DC voltage to AC output. The energy feedback technology and one circle control scheme are used t...

Current Share Control IC Design for Paralleled DC/DC Converters

To keep even current distribution among DC/DC converters in a paralleled power system,an automatic master-slave control （AMSC） current sharing scheme is presented,which was implemented by a current share control IC. A current feedback loop for output voltage adjustment is proposed for low signal distortion. Moreover,a special startup control logic is designed to improve startup timing and to speed up the initial current sharing. It was completed in 1.5μm bipolar-CMOS-DMOS （BCD） technology with an area of 3.6mm^2 . Using it,a paralleled power system of two DC/DC converters capable of outputting 12V/3A was built. Experimental results show that the current sharing error at full load is kept within 1%.

High Frequency Transformers for DC/DC Converter Used in Solar PV System

This paper presents and investigates planar and coaxial high frequency power transformers used for DC/DC converters in a three phase photo voltaic （PV） power systems. The winding structure including a Faraday shield between the primary and secondary windings is designed to minimize eddy current losses, skin and proximity effects, and to reduce the leakage inductance, and the inter winding coupling capacitance. Finite Element Method is employed to analyze the magnetic flux and eddy current distributions. The two different kinds of prototype high frequency transformers are designed and tested. The simulation and experiment results are demonstrated and compared with non-shielded transformers. The shielded transformers have achieved the expected results with a relatively small coupling capacitance, compared with the conventional high frequency transformer. This shield decreases the inter-winding coupling capacitance Cps. The topology of this shield has to be such that it acts as a Faraday screen while avoiding eddy current generation.

Design Criterion for Interleaving and Magnetically Integrated Bidirectional DC/DC Converters

双向DC/DC变换器中大功率储能电感的设计是一件困难而具有挑战性的工作,提出研究双向DC/DC变换器的交错并联磁集成理论以克服这一困难。将三相Buck＋Boost双向DC/DC变换器的所有相电感集成为一个耦合电感,对磁集成后变换器运行在Buck模式下的稳态电流纹波和暂态响应速度进行深入研究,给出三相Buck＋Boost交错并联磁集成双向DC/DC变换器运行在Buck模式下的设计准则,即在设计这种变换器时,应根据占空比的大小及稳态相电流纹波和暂态总输出电流响应速度的技术要求,利用该文所给出的设计公式和设计区域选择磁集成耦合电感的反向耦合系数。仿真和实验验证了理论分析的正确性。

Energy Factor and Mathematical Modeling for Power DC/DC Converters

Mathematical modelling for power DC/DC converters is a historical problem accompanying DC/DC conversion technology since 1940’s. The traditional mathematical modelling is not available for complex structure converters since the differential equation order increases very high. We have to search other way to establish mathematical modelling for power DC/DC converters.We have theoretically defined a new concept-Energy Factor （EF） in this paper and researched the relations between EF and the mathematical modelling for power DC/DC converters. EF is a new concept in power DC/DC conversion technology, which thoroughly differs from the traditional concepts such as power factor （PF）, power transfer efficiency （η）, total harmonic distortion （THD） and ripple factor （RF）. EF and the subsequential EFV (and EFVD) can illustrate the system stability, reference response and interference recovery. This investigation is very helpful for system design and DC/DC converters characteristics foreseeing. Two DC/DC converters: Buck converter and Super-Lift Luo-Converter as the samples are analysed in this paper to demonstrate the applications of EF, EFV (and EFVD), PE, SE, VE （and VED）, time constant τ and damping time constant τd.

Weight and Efficiency Optimized DC/DC Converter Based on Multiple Interleaved Channels

Today, energy saving is one of the main objectives for engineers. In the case of mobile applications, energy can be saved by two different ways： decreasing the total masse of the system and increasing the efficiency of the overall system. This paper presents two optimization strategies to design a predefined multichannel structure of a boost converter which is dedicated to a solar airplane and used to interface PV panels and the battery system. The first strategy is a multi-criterion method that is able to trace the dependency between the converter＇s efficiency and its power density through the intermediary of the Pareto front. The second method, a mono-criterion approach, maximizes efficiency while respecting the constraint imposed on power density. The mono-criterion method that is applied to maximizing the European efficiency criterion showed that an increase in the number of channels enhanced the quantity of energy collected over a day by increasing the power density of the converter. At the end of the paper, the optimal design calculated was built to give an example of the result obtained by this design methodology. The results of the efficiency measurements made on a realized prototype are presented in this paper.

Robust Control Strategy for Inductive Parametric Uncertainties of DC/DC Converters in Islanded DC Microgrid

Direct current(DC) microgrid consists of many parallel power converters that share load currents through the inductance of DC/DC converters. Usually, the inductance parameters are dependent on the physical implementation of the system, and their values may not match their nameplates. Such disparities could lead to unequal response characteristics of the system, which can potentially reduce the performances of the DC microgrid operation. This paper proposes a robust control strategy for inductive parametric uncertainties of DC/DC converters using an optimal control method with integral action. To achieve such a goal, the system model parameters with nominal values are transformed into parametric unmatched uncertainties to form a robust control problem, which is then transformed into a linear quadratic regulator problem. The inductance uncertainties are stabilized with the uncertainty dynamic algebraic Riccati equation(UDARE) using state feedback gain under linear quadratic regulator. The closed-loop control with integral action is adopted to achieve a steady-state error of zero on the DC-link voltage at any uncertainty of the inductive parameter, which subsequently ensures the equal load current sharing. Off-line simulations and real-time validations based on OpalRT have been conducted to demonstrate the effectiveness and robustness of the proposed robust control strategy.

Phasor Analytical Model of Non-isolated DC/DC Converter Based on Modular Multilevel Converter for DC Transmission Grids

Non-isolated DC/DC converter based on modular multilevel converter(MMC)technology is expected to play an important role in future DC transmission grids.This paper presents a phasor analytical model for this new family of converters which is suitable for a range of studies like DC grid power flow or DC/DC parametric design.The 30th-order phasor model is derived in 3 coordinate frames:zero sequence(DC),fundamental frequency(dq),and double frequency(d2q2).The second-harmonic current suppression control is included as an option.Additionally,an estimation of the required control signals is presented,and a closed-loop model is developed which facilitates direct calculation of all variables and fast parametric studies.The accuracy of the proposed models is verified against a detailed PSCAD model for a wide range of parameters.The studies illustrate the importance of the second-harmonic components on the model accuracy.Finally,the impact of the converter parameters on the performance is studied,and a basic eigenvalue stability analysis is given.

Novel integrated three-port DC/DC converter for different operating modes between renewable energy,electrolyser and fuel cell/battery

Due to the slow dynamic power-regulation characteristics of the electrolyser(EL),a novel integrated three-port DC/DC converter topology based on a phase-shifted full-bridge converter and dual active-bridge converter is proposed in this paper.Especially,the proposed converter can achieve a fast auxiliary response to the EL.This topology has the features of single-stage conversion,high system integration and compatibility with multiple operation modes.The operational principles and a hybrid modulation scheme of the proposed converter are analysed in detail.In addition,the power-transmission characteristics of each port and the soft-switching range are researched.On these bases,six operation modes suitable for a hydrogen energy-storage system are designed.The simulation and a 2-kW scaled-down experimental prototype are established to verify the feasibility and effectiveness of the proposed topology in different operation modes.

Superconducting Magnetic Energy Storage Integrated Current-source DC/DC Converter for Voltage Stabilization and Power Regulation in DFIG-based DC Power Systems

Unpredictable power fluctuation and fault ridethrough capability attract increased attention as two uncertain major factors in doubly-fed induction generators(DFIGs)integrated DC power system.Present solutions usually require complicated cooperation comprising multiple modules of energy storage,current control,and voltage stabilizer.To overcome the drawbacks of existing solutions,this paper proposes a superconducting magnetic energy storage(SMES)integrated currentsource DC/DC converter(CSDC).It is mainly composed of a current-source back-to-back converter,and the SMES is tactfully embedded in series with the intermediate DC link.The proposed SMES-CSDC is installed in front of the DC-DFIG to carry out its dual abilities of load voltage stabilization under multifarious transient disturbances and power regulation under wind speed variations.Compared with the existing DC protection devices,the SMES-CSDC is designed on the basis of unique current-type energy storage.It has the advantages of fast response,extensive compensation range,concise hardware structure,and straightforward control strategy.The feasibility of the SMESCSDC is implemented via a scaled-down experiment,and its effectiveness for DC-DFIG protection is verified by a large-scale DC power system simulation.

DC-Link Capacitor Optimization in AC–DC Converter by Load Current Prediction

Alternating Current–Direct Current(AC–DC)converters require a high value bulk capacitor or afilter capacitor between the DC–DC conversion stages,which in turn causes many problems in the design of a AC–DC converter.The component package size for this capacitor is large due to its high voltage rating and capacitance value.In addition,the high charging current creates more pro-blems during the product compliance testing phase.The shelf life of these specific high value capacitors is less than that of Multilayer Ceramic Capacitors(MLCC),which limits its use for the highly reliable applications.This paper presents a fea-sibility study to overcome these two problems by adding a few sensing mechan-isms to the typical AC–DC converter topology.In majority of the AC–DC converter,Al-Elko capacitor takes approximately 3%to 5%of the converter size.The proposed method reduces this to approximately 50%size and so it effectively approximates 2%to 3%size reduction in converter size.The proposed method basically works based on the load current prediction method and hence it is highly suitable for the constant load application.Moreover,the converter response time increases in this method,which limit its application in high-speed systems.The high temperature application of Al-Elko capacitor is limited because of its poor performance,which is significantly rectified by replacing the Al-Elko with MLCC as it delivers good performance in high temperature.

Attack-resilient control for converter-based DC microgrids

In light of the growing integration of renewable energy sources in power systems,the adoption of DC microgrids has become increasingly popular,due to its simple structure,having no frequency,power factor concerns.However,the dependence of DC microgrids on cyber-networks also makes them susceptible to cyber-attacks.Potential cyberattacks can disrupt power system facilities and result in significant economic and loss of life.To address this concern,this paper presents an attack-resilient control strategy for microgrids to ensure voltage regulation and power sharing with stable operation under cyber-attack on the actuators.This paper first formulates the cyber-security problem considering a distributed generation based microgrid using the converter model,after which an attack-resilient control is proposed to eliminate the actuator attack impact on the system.Steady state analysis and root locus validation illustrate the feasibility of the proposed method.The effectiveness of the proposed control scheme is demonstrated through simulation results.

模块化高压大容量DC/DC变换器综述

随着新能源发电占比增加和电网规模的不断扩大,直流输电系统的容量不断提升,含有不同电压等级的直流电网是未来发展的必然趋势。在此背景下,DC/DC变换器作为直流电网关键设备,在多电压等级互联场景中发挥着重要作用。文中首先对已有的模块化高压大容量DC/DC变换器进行归纳、分类和比较,然后阐述了目前模块化高压大容量DC/DC变换器的拓扑结构、工作原理与特点,并针对其特点提出了不同变换器的适用场景,最后对未来的研究方向提出了建议。

基于回流功率优化的直流微网DC-DC变流器超螺旋滑模控制

针对直流微网系统中双有源桥直流变换器在系统发生扰动时动态特性差及在单移相调制下变换器效率不高等问题,该文在扩展移相调制下提出一种结合回流功率优化的超螺旋滑模控制策略。首先,分析双有源全桥(dual-active-bridge,DAB)变换器在扩展移相调制下两种模式的传输功率、回流功率数学模型及软开关特性,并以传输功率数学模型为基础建立DAB变换器的降阶模型。其次,以回流功率作为目标函数,以传输功率和软开关特性作为约束条件,通过Karush-Kuhn-Tucker(KKT)条件法寻找最优移相比组合;利用DAB变换器降阶模型设计超螺旋滑模控制中的等效部分,采用超螺旋算法作为切换部分,这两部分与内移相比D1共同作用生成外移相比D2,用于调节变换器的输出电压。最后进行了仿真及实验验证,实验结果表明:在负载投切、输入电压突变、参考电压改变时变换器具有良好的动态性能,同时能有效地减小回流功率。

一种交叉倍压型高增益DC/DC变换器

针对光伏发电、燃料电池发电等领域对高增益直流变换器的需求,以两相交错并联升压变换器为研究对象,由2个含有电感的倍压单元组合设计出实现电压提升的交叉倍压结构,据此提出了一种新颖的交叉倍压型高增益DC/DC变换器。该变换器可实现(3n+4)/(1-d)倍的高电压增益(1∶n为耦合电感匝数比,d为变换器占空比),且具有电路器件的低电压应力特性。对于漏感引起的开关管电压尖峰问题,引入了钳位电容构成释放漏感能量通道,同时提升了输出电压。介绍了新型交叉倍压型高增益变换器的拓扑结构,分析了变换器各模态的工作过程,推导了电压增益、输入电流纹波及各器件电压应力等稳态特性,并搭建样机进行实验研究,验证了该直流变换技术方案的可行性和先进性。

基于单边调制映射函数的LCC-HVDC直流侧阻抗精确建模

阻抗模型是电网换相换流器型高压直流输电系统小信号稳定性分析的重要基础,阻抗模型的准确程度直接影响系统小扰动稳定性分析。该文首先从同步触发原理出发,引入基于单边调制产生的映射函数,该函数蕴含控制及换相信息,可以准确建立换相/非换相期间交直流侧的映射关系;其次,考虑换相动态并通过谐波线性化和傅里叶变换建立完整的直流侧电压和交流侧电流的频域小信号动态模型;再次,考虑控制和换流阀阻尼回路,建立整流侧和逆变侧直流阻抗解析模型;最后,以CIGRE高压直流标准测试模型为例,基于PSCAD/EMTDC平台验证了直流侧阻抗模型的准确性及其用于小扰动稳定性分析的有效性。

固态变压器中隔离双向DC/DC变换器扩展移相下虚拟电流控制策略

该文以固态变压器后级隔离双向DC/DC变换器为重点研究对象,提出一种扩展移相下虚拟电流控制策略。通过分析后级变换器在扩展移相传输功率下相移量关系以获得最小电流应力最优解来提高变换器的传输效率,减少器件损耗。同时通过虚拟电流控制思想在线估算传输功率来提高系统动态响应性能,减少电流传感器使用。最后,对该文所提出的扩展移相下虚拟电流控制与扩展移相控制进行实验对比分析,验证了扩展移相下虚拟电流控制策略具有降低电流应力,显著提高变换器的动态响应的优点。

基于移相控制统一模型的双有源桥DC-DC变换器基波环流优化控制策略

为充分利用双有源桥DC-DC变换器的容量,减小无功功率,提升工作效率,提出一种基于变换器移相控制统一模型的基波环流优化控制策略。通过引入基波移相比对变换器的所有移相控制方式进行统一描述,并采用傅里叶分解法建立全桥交流电压及电感电流的统一模型。该统一模型降低了多控制变量下变换器多模态分析的复杂性,适用于不同移相控制的所有工作模式,具有普适性。基于频域分析法和功率因数角,构建变换器传输功率及无功功率的统一数学模型。在此基础上,提出考虑无功基波分量的环流优化控制策略,并对传导损耗进行建模与分析。该策略简单有效,能够很好地减小变换器无功功率和改善系统效率,更有利于工程实际的应用。搭建了实验平台,对比了所提基波环流优化控制策略与传统移相控制方式下变换器的功率因数及变换效率,仿真和实验结果验证了理论分析的正确性和所提控制策略的可行性。

单级三相谐波电流注入可升降压AC/DC变换器

为适应电动车充电电压宽范围变化需求,本文针对传统充电桩前级整流器拓扑开展研究,提出一种新式单级三相AC/DC变换器。该变换器集成了三相桥式不控整流电路与Cuk模块,为降低输入侧电流谐波分量,选用双向开关管构建谐波电流回馈通路,整体构造成单级式拓扑结构。文章阐述了变换器的电路结构及工作模态,通过建立变换器的等效模型推导出电压增益。变换器通过简单的控制逻辑即可实现正弦输入电流并拥有高功率因数。最后通过搭建变换器数字控制实验平台验证了所提变换器的可行性。

基于时变权重模型预测的双向DC-DC优化控制方法

双向DC-DC变换器是电动汽车的关键电压变换部件,提高其动态负载下的响应速度与鲁棒性对电动汽车低压供电系统有重要意义。提出一种基于模糊时变权重的MPC(model predictive control)控制方法。基于状态空间平均法建立变换器动态模型。基于MPC原理搭建变换器MPC模型,实现对电压的跟踪控制;在分析权重对动态负载下电压跟踪性能的影响的基础上,设计权重模糊调节器,实现权重的在线调节。基于HM-cSPACE搭建实验平台验证所提方法的准确性。在Matlab/Simulink环境下与PI控制和传统MPC控制进行对比,结果表明:在负载变化时采用时变权重MPC控制的变换器有更好的动态性能和鲁棒性,超调量降低26.1%。该方法对提高双向DC-DC变换器动态负载下的优化控制具有重要意义。