Surface plasmon polariton and mode transformation in a nanoscale lossy metallic cylindrical cable

A theoretical investigation on the surface plasmon polariton in a gold cylindrical nanocable is presented. By solving a complete set of Maxwell＇s equations in the nanocable （with a 50 nm radius gold nanocore, 10-300 nm silica layer, and 30-200nm gold nanocladding）, the dispersion relations on the optical frequency and on the silica thickness are discussed. When the silica thickness varies from 50 to 250 nm, at a fixed waveleltgth, the strong coupling between the gold nanocore and the nanocladding leads to a symmetric-like surface mode and an antisymmetric-like surface mode in the nanocable. The transformation between the surface mode and the waveguide mode in this structure is also investigated. The results will be helpful for understanding the surface waves in the subwavelength structures.

Variational Mode Decomposition-Informed Empirical Wavelet Transform for Electric Vibrator Noise Analysis

Electric vibrators find wide applications in reliability testing, waveform generation, and vibration simulation, making their noise characteristics a topic of significant interest. While Variational Mode Decomposition (VMD) and Empirical Wavelet Transform (EWT) offer valuable support for studying signal components, they also present certain limitations. This article integrates the strengths of both methods and proposes an enhanced approach that integrates VMD into the frequency band division principle of EWT. Initially, the method decomposes the signal using VMD, determining the mode count based on residuals, and subsequently employs EWT decomposition based on this information. This addresses mode aliasing issues in the original method while capitalizing on VMD’s adaptability. Feasibility was confirmed through simulation signals and ultimately applied to noise signals from vibrators. Experimental results demonstrate that the improved method not only resolves EWT frequency band division challenges but also effectively decomposes signal components compared to the VMD method.

The Theoretical Foundation and its Mode Transformation of Rural Public Goods Supply in the Perspective of Organizational Competition

Theoretical expositions of public goods supply by the liberalism,new institutionalism and the school of public choice are conducted in the perspective of organizational competition.And the theoretical foundation of rural public goods is put forward.Then,the changes of the supply mode of rural public goods are discussed before and after the tax reform,that is,the "Community Cooperation" supply mode of rural public goods before the tax reform and the "Organization Cooperation" supply mode of rural public goods after the tax reform.Finally,the diversification of rural public goods supply in China in future is forecasted.

Characteristics and advantages of energy performance contracting mode for energy saving transformation of existing large public building

Existing large-scale public building energy saving renovation is the inherent requirement of sustainable development, it has been proved that implementing the energy performance contracting mode in the Existing large public buildings energy-saving is an effective way both at home and abroad. EPC mode has obvious characteristics for the ESCO and the customers, it can meet the basic requirements of large public buildings energy-saving, such as the width of funding sources, program specifi cation, advanced technology, information fl ow and management level higher, etc. Under the condition of market economy, it also provides a broad platform for the ESCO implements building energy saving transformation, which is conducive to the realization of the win-win cooperation between the parties, and to promote the healthy development of the existing large public building energy saving reconstruction.

Basic conditions study to accelerate the realization of transformation of Shaanxi＇s economy growth mode

It is an urgent and important economic work in the moment and the next period for China to realize the transformation of economic growth mode. Relatively, there must be certain basic conditions. This article makes elaboration of the basic conditions, which accelerate the change of Shaanxi＇s economic growth mode from government angle, and proposes countermeasures for it, according to Shaanxi＇s situation and the requirement of scientific development concept, in order to provide basis for the government＇s economic growth transformation.

Transformation of the Growth Mode:What Must Be Changed?

That the Chinese economy has been burgeoning for nearly 30 years is an irrefutable fact.However,this robust growth has been achieved amidst accusations of"extensive"development and"low-efficiency".Many scholars believe that low-priced labour is pivotal to China’s rapid growth.Even so,we find it hard to explain why China has been able to achieve sustained growth while so many countries with even lower labour costs remain trapped in poverty The following article offers a new perspective upon this paradox.

Coordinate-Dependent One- and Two-Mode Squeezing Transformation and the Corresponding Squeezed States

We introduce the coordinate-dependent one-and two-mode squeezing transformations and discuss theproperties of the corresponding one-and two-mode squeezed states.We show that the coordinate-dependent one-and two-mode squeezing transformations can be constructed by the combination of two transformations,a coordinate-dependentdisplacement followed by the standard squeezed transformation.Such a decomposition turns a nonlinear problem intoa linear one because all the calculations involving the nonlinear one- and two-mode squeezed transformation have beenshown to be able to reduce to those only concerning the standard one- and two-mode squeezed states.

Agricultural Development Mode Transformation and Government Functions in Guizhou Province

Based on the brief account of the connotation of transforming economic development pattern and government functions,the thesis will introduce the development status of agricultural economy in Guizhou Province:firstly,single agricultural industrial structure;secondly,large gap between urban and rural development;thirdly,low-level utilization of agricultural science and technology;fourthly,fierce contradiction between agricultural mode of production and ecological environment.Then it analyzes the basic requirements for government functions in transforming the development pattern of agricultural economy in Guizhou Province:the first one is the function to guide sustainable development and the structural adjustment of agricultural production;the second is the function to coordinate urban-rural development and equally supply basic public goods;the third is the function to input science and technology to serve agriculture;the fourth one is the dominant function to promote the harmonious development of man and nature as well as to reduce the number of peasants.In order to promote the transformation of agricultural development mode and maintain the sound and rapid economic development,some corresponding measures and suggestions are proposed from the perspective of government functions:firstly,promoting the optimization and upgrading of industrial structure;secondly,the government should take the lead in providing rural public goods;thirdly,strengthening the skills training and technological education of rural labor force;fourthly,reducing the number of farmers and retaining the farmers.

Transformation of alkali and alkaline-earth metals during coal oxy-fuel combustion in the presence of SO_2 and H_2O

The occurrence modes of alkali and alkaline-earth metals（AAEMs） in coal relate to their release behavior and ash formation during combustion. To better understand the transformation of AAEMs,the release behavior of water-soluble,HCl-soluble,HCl-insoluble AAEMs during Shenmu coal（SM coal） oxy-fuel combustion in the presence of SO2 and H2O in a drop-tube reactor was investigated through serial dissolution using H2O and HCl solutions. The results show that the release rates of AAEMs increase with an increase in temperature under the three atmospheres studied. The high release rates of Mg and Ca from SM coal are dependent on the high content of soluble Mg and Ca in SM coal. SO2 inhibits the release rates of AAEMs,while H2O promotes them. The effects of SO2 and H2O on the Na and K species are more evident than those on Mg and Ca species. All three types of AAEMs in coal can volatilize in the gas phase during coal combustion. The W-type AAEMs release excessively,whereas the release rates of I-type AAEMs are relatively lower. Different types of AAEM may interconvert through different pathways under certain conditions. Both SO2 and H2O promote the transformation reactions. The effect of SO2 was related to sulfate formation and the promotion by H2O occurs because of a decrease in the melting point of the solid as well as the reaction of H2O.

Mode Recognition of Lamb Wave Detecting Signals in Metal Plate Using the Hilbert-Huang Transform Method

The dispersion and multiple modes characteristics which exist in the propagation of Lamb waves (LW) in metal plates make it extremely hard to analyze and recognize the detection echo signals of defects. As a newly developed time-frequency analysis method in recent years, Hilbert-Huang transform (HHT) is one of the powerful tools to analyze non-stationary signals. The experimental LW detecting system for single aluminum plate is setup in this work, and the LW detecting signals are analyzed by HHT. The overlapped LW detecting signals of different modes are recognized by the means of extracting flight time of intrinsic mode functions (IMFs) after Hilbert transform (HT). The experiment results, agreeing well with the theoretical analysis, indicate that the HHT method can clearly recognize overlapped LW detecting signals of different modes in metal plates, but could hardly recognize that of the same mode. HHT can be an effective method to recognize LW detecting signals of different modes in metal plates.

Comprehensive Reliability Allocation Method for CNC Lathes Based on Cubic Transformed Functions of Failure Mode and Effects Analysis

Reliability allocation of computerized numerical controlled（CNC）lathes is very important in industry.Traditional allocation methods only focus on high-failure rate components rather than moderate failure rate components,which is not applicable in some conditions.Aiming at solving the problem of CNC lathes reliability allocating,a comprehensive reliability allocation method based on cubic transformed functions of failure modes and effects analysis（FMEA）is presented.Firstly,conventional reliability allocation methods are introduced.Then the limitations of direct combination of comprehensive allocation method with the exponential transformed FMEA method are investigated.Subsequently,a cubic transformed function is established in order to overcome these limitations.Properties of the new transformed functions are discussed by considering the failure severity and the failure occurrence.Designers can choose appropriate transform amplitudes according to their requirements.Finally,a CNC lathe and a spindle system are used as an example to verify the new allocation method.Seven criteria are considered to compare the results of the new method with traditional methods.The allocation results indicate that the new method is more flexible than traditional methods.By employing the new cubic transformed function,the method covers a wider range of problems in CNC reliability allocation without losing the advantages of traditional methods.

Design of Second Order Sliding Mode and Sliding Mode Algorithms:A Practical Insight to DC-DC Buck Converter

This paper presents a simple and systematic approach to design second order sliding mode controller for buck converters.The second order sliding mode control(SOSMC)based on twisting algorithm has been implemented to control buck switch mode converter.The idea behind this strategy is to suppress chattering and maintain robustness and finite time convergence properties of the output voltage error to the equilibrium point under the load variations and parametric uncertainties.In addition,the influence of the twisting algorithm on the performance of closed-loop system is investigated and compared with other algorithms of first order sliding mode control such as adaptive sliding mode control(ASMC),nonsingular terminal sliding mode control(NTSMC).In comparative evaluation,the transient response of the output voltage with the step change in the load and the start-up response of the output voltage with the step change in the input voltage of buck converter were compared.Experimental results were obtained from a hardware setup constructed in laboratory.Finally,for all of the surveyed control methods,the theoretical considerations,numerical simulations,and experimental measurements from a laboratory prototype are compared for different operating points.It is shown that the proposed twisting method presents an improvement in steady state error and settling time of output voltage during load changes.

CONFORMAL TRANSFORMATION SOLUTION FOR THE ATTENUATION CONSTANT OF TEM TRANSMISSION LINES

The conformal transformation solution is presented for the attenuation constant ofTEM transmission lines which can be mapped into the coaxial or the parallel plate lines by certainconformal transformations including the numerical ones.The analytic and numerical results ofsome examples are also given.

Super long-range diffusion of carbon during proeutectoid ferrite transformation

In order to explore the possible diffusion distance of carbon during proeutectoid ferrite transformation, a slow cooling test of low carbon steel was carried out under vacuum of the thermal simulator. The microstructure and thermal expansion curve were discussed and the carbon concentration inside the sample was measured. The ferrite layer of about 450 μm thickness was obtained without pearlite on the surface of the sample in the microstructure. The thermal expansion curve shows that the ferrite layer without pearlite is formed during the local phase transformation, which is followed by the global transformation. The carbon concentration in the core of the sample (0.061%) is significantly higher than that of the bulk material (0.054%). All results show that carbon has long-range diffusion from the outer layer to the inner layer of the sample. The transformation is predominantly interface-controlled mode during local transformation, and the interface migration rate is about 2.25 μm/s.

Study of Sliding Mode Control of DC-DC Buck Converter

In this paper, a robust sliding mode controller for the control of dc-dc buck converter is designed and analyzed. Dynamic equations describing the buck converter are derived and sliding mode controller is designed. A two-loop control is employed for a buck converter. The robustness of the sliding mode controlled buck converter system is tested for step load changes and input voltage variations. The theoretical predictions are validated by means of simulations. Matlab/Simulink is used for the simulations. The simulation results are presented. The buck converter is tested with operating point changes and parameter uncertainties. Fast dynamic response of the output voltage and robustness to load and input voltage variations are obtained.

融合Transformer和卷积LSTM的轨迹分类网络

为了减少原始轨迹数据的噪声,充分提取轨迹的时空特征,提高基于轨迹数据的交通模式分类精度,提出一种融合堆叠降噪自编码器、Transformer和卷积长短期记忆网络的轨迹分类网络(networks fusing stacked denoising auto-encoder, Transformer and ConvLSTM,SDAETC)。通过堆叠降噪自编码器减少原始轨迹数据中的噪声;利用结合了Transformer的递归图自编码器,提取到更为丰富的时间特征,同时利用特征图自编码器提取空间特征;改进卷积长短期记忆网络,充分提取轨迹中的时空特征,并与提取到的时间特征和空间特征相融合,从而实现交通模式分类。实验结果表明,提出的SDAETC与基线模型相比,在GeoLife和SHL数据集上的准确率分别提升了1.8%和2%。此外,消融实验结果和模型训练时间分析表明,引入堆叠降噪自编码器、Transfomer和ConvLSTM虽然增加了时间消耗,但是对分类精度有积极贡献。

基于自适应噪声完全集合经验模态分解与BiLSTM-Transformer的锂离子电池剩余使用寿命预测

锂离子电池剩余使用寿命(remaining useful life,RUL)是使用者十分关心的问题,其涉及电池的更换时间和安全。针对锂离子电池的电容量非线性变化趋势,提出了一种基于自适应噪声完全集合经验模态分解与双向长短期记忆网络-Transformer的锂离子电池剩余使用寿命预测方法。首先,利用自适应噪声完全集合经验模态分解方法对锂离子电池电容量数据进行分解。其次,使用串联的双向长短期记忆神经网络和Transformer网络对分解后得到的残差序列和本征模态分量序列进行建模预测。最后,将预测的若干本征模态分量序列和残差序列进行求和,并对求和之后的最终预测数据与原始数据进行RUL预测。采用NASA公开的电池数据集对所提方法进行验证,结果表明,所提方法的平均绝对误差、均方根误差、平均绝对百分比误差和绝对误差控制分别控制在0.0173、0.0231、1.2084%和3个循环周期以内,能够有效地提高锂离子电池RUL的预测精度。

Paralleled DC-DC Power Converters Sliding Mode Control with Dual Stages Design

This paper proposes the new cascaded series parallel design for improved dynamic performance of DC-DC buck boost converters by a new Sliding Mode Control (SMC) method. The converter is controlled using Sliding Mode Control method that utilizes the converter’s duty ratio to determine the skidding surface. System modeling and simulation results are presented. The results also showed an improved overall performance over typical PID controller, and there was no overshoot or settling time, tracking the desired output nicely. Improved converter performance and robustness were expected.

Scattering and Transformation of Waves on Heavy Particles in Magnetized Plasma

The scattering and transformation of the waves propagating in magnetized plasma on a heavy stationary charged particle located at a plane plasma-vacuum boundary is considered. The scattering (transformation) occurs due to the nonlinear coupling of the incident wave with the polarization (shielding) cloud surrounding the particle. It is shown that the problem is reduced to the determination of the nonlinear (three index) dielectric tensor of magnetized plasma. The angular distribution and the cross section for scattering (transformation) of high-frequency ordinary and extraordinary waves and low-frequency upper-hybrid, low-hybrid, and magnetosonic waves are investigated within a cold plasma (hydrodynamic) model.

Effects of Acetosyringone on Genetic Transformation of Waxy Maize Using Different Receptor Systems

Acetosyringone （AS） has great influences on Agrobacterium-mediated genetic transformation. In order to improve the transformation frequency of waxy maize, in this study, shoot tips and immature embryo-derived callus of Lainongnuo 38 were collected as receptor materials, to compare the effects of pH in suspension medium, addition modes and concentrations of acetosyringone on genetic transformation of waxy maize. Results showed that adding 2 μl of 150 μmol/L AS in the wound with suspension medimn at pH 5.2 can significantly improve the transformation frequency of shoot tips of waxy maize; in genetic transformation of maize callus, adding 5 mg/L AS in infection solution can significantly improve the percentage of resistant callus.