Optimized calculations of 209 polychlorinated diphenyl ethers （PCDEs） and diphenyl ethers were carried out at the B3LYP/6-31G^＊ level with the Gaussian 98 program. Based on the theoretical linear solvation energy r...Optimized calculations of 209 polychlorinated diphenyl ethers （PCDEs） and diphenyl ethers were carried out at the B3LYP/6-31G^＊ level with the Gaussian 98 program. Based on the theoretical linear solvation energy relationship （TLSER） model, the obtained structural parameters were taken as theoretical descriptors to establish the novel QSPR model for predicting aqueous solubility （-lgSw） of PCDEs. The model obtained in this work contains two variables： mean molecular polarizability （a） and the most positive partial charge on a hydrogen atom （qH^＋）, of which RE = 0.9606 and SD = 0.32. And the results of cross-validation test also show that the model exhibits optimum stability and better predictive power. Moreover, the predictive power of the new model is better than that of MCIs method.展开更多
Many attempts have been made to control the regioselectivity for olefin poly- merization by varying the structures of ligands in catalysts. The regioselectivity of propylene polymerization was investigated by replacin...Many attempts have been made to control the regioselectivity for olefin poly- merization by varying the structures of ligands in catalysts. The regioselectivity of propylene polymerization was investigated by replacing a nitrogen atom in the Pd(II) diimine catalyst with an oxygen atom from density functional theory method at the B3LYP/LANL2DZ level. The results show that the 1,2-insertion becomes a rival mechanism to the 2,1-insertion when the nitrogen atom is replaced by the oxygen atom leading to an asymmetric environment in the catalyst, and that the steric effect in the asymmetrical catalyst plays an important part in the polymerization. The insertion barrier from 2-O is much higher than that from 2-N. A pyramid transition state was characterized for the catalyst to convert 2-O back to 2-N through internal rotation. The propylene prefers to coordinate at the opposite side of O in the catalyst. This is the driving force for the internal rotation. The results are significant for isotactic and syndiotactic polymerization.展开更多
Liquid-phase acrylic acid hydration over solid-phase catalysts is a key reaction for the industrial productionof 3-hydroxypropionic acid. However, the relevant literature primarily focuses on the experimental aspects ...Liquid-phase acrylic acid hydration over solid-phase catalysts is a key reaction for the industrial productionof 3-hydroxypropionic acid. However, the relevant literature primarily focuses on the experimental aspects of catalystscreening and exploring reaction conditions, with few accurate descriptions of the reaction kinetics and determination ofthe reaction mechanism. Here, we combined kinetics experiments and theoretical calculations to elucidate the kinetics andmechanism of acrylic acid hydration on a resin catalyst. The pseudo-homogeneous model, and Langmuir-Hinshelwood-Haugen-Watson and Elie-Riedel (ER) heterogeneous models were used to explain the experimental kinetics data. TheER model can explain the experimental data very well, suggesting strong adsorption of acrylic acid on the surface of theresin catalyst. Furthermore, density functional theory calculations show that the hydration follows a stepwise, rather than aconcerted, reaction pathway. The present study provides theoretical insights into the reaction mechanism and kinetics, fillingthe gap in our understanding of the reaction on a fundamental level.展开更多
Sodium azide is a widely used inorganic compound. Besides the commonly used method of ＂Wislicenus process＂ which uses ammonia, nitrous and sodium as materials, the hydrazine hydrate route is also employed for the pr...Sodium azide is a widely used inorganic compound. Besides the commonly used method of ＂Wislicenus process＂ which uses ammonia, nitrous and sodium as materials, the hydrazine hydrate route is also employed for the preparation of sodium azide particularly in laboratory. However, because many species are involved in the reaction system, the reaction details for the hydrazine hydrate route are still unclear. A comprehensive understanding of the reaction mechanism may provide meaningful help for optimizing the production process. In this work, the reaction mechanism for the synthesis of sodium azide by hydrazine hydrate route has been studied using density function theory（DFT） method. On the basis of our calculations, the reaction details, including the energetics of ten elementary steps, the structures of intermediates and transition states as well as the influence of inorganic acids and alcohols, were illuminated at the atomistic level. Both the two steps, the generation of key intermediate（NH2-NH-NO） and the trans-cistransformation of NH2-NH-NO, are suggested to be the possible rate-limiting step, corresponding to the energy barriers of 20.3 and 22.7 kcal/mol, respectively. In the early reaction steps to generate NH2-NH-NO, the main role of sulphuric acid is to donate proton, which can be replaced by nitric acid or hydrochloric acid. From the energy point of view, isopropanol has similar reactivity as methanol and ethanol.展开更多
A series of ruthenium azopyridine complexes have recently been investigated due to their potential cytotoxic activities against renal cancer (A498), lung cancer (H226), ovarian cancer (IGROV), breast cancer (MCF-7) an...A series of ruthenium azopyridine complexes have recently been investigated due to their potential cytotoxic activities against renal cancer (A498), lung cancer (H226), ovarian cancer (IGROV), breast cancer (MCF-7) and colon cancer (WIDR). Thus, in order to predict the cytotoxic potentials of these compounds, quantitative structure-activity relationship studies were carried out using the methods of quantum chemistry. Five Quantitative Structure Activity Relationship (QSAR) models were obtained from the determined quantum descriptors and the different activities. The models present the following statistical indicators: regression correlation coefficient R2 = 0.986 - 0.905, standard deviation S = 0.516 - 0.153, Fischer test F = 106.718 - 14.220, correlation coefficient of cross-validation = 0.985- 0.895 and = 0.010 - 0.001. The statistical characteristics of the established QSAR models satisfy the acceptance and external validation criteria, thereby accrediting their good performance. The models developed show that the variation of the free enthalpy of reaction , the dipole moment μ and the charge of the ligand in the complex Ql, are the explanatory and predictive quantum descriptors correlated with the values of the anti-cancer activity of the studied complexes. Moreover, the charge of the ligand is the priority descriptor for the prediction of the cytotoxicity of the compounds studied. Furthermore, QSAR models developed are statistically significant and predictive, and could be used for the design and synthesis of new anti-cancer molecules.展开更多
Optimized calculations of 75 PCDDs and their parent DD were carded out at the B3LYP/6-31G＊ level by density functional theory （DFT） method. The structural parameters were obtained and significant correlation betwee...Optimized calculations of 75 PCDDs and their parent DD were carded out at the B3LYP/6-31G＊ level by density functional theory （DFT） method. The structural parameters were obtained and significant correlation between the C1 substitution position and some structural parameters was found. Consequently, the number of C1 substitution positions was taken as theoretical descriptors to establish two novel QSPR models for predicting lgKow and -lgSw of all PCDD congeners. The two models achieved in this work contain two variables （Na and Nβ）, of which r = 0.9312, 0.9965 and SD = 0.27, 0.12 respectively, and t values are all large. The variation inflation factors （VIF） of variables in the two models herein are both less than 5.0, suggesting high accuracy of the lgKow and -lgSw predicting models, and the results of cross-validation test also show that the two models exhibit optimum stability and good predictive power. By comparison, the correlation and predictive ability of the present work are more advantageous than those obtained using semi-empirical AM1 and GC-RI methods.展开更多
The process and mechanism of the ligand volume controlled Pd（PR3）2 （PR3=PH3, PMe3, and PtBu3） oxidative addition with aryl bromide were investigated, using density functional theory method with the conductor-like ...The process and mechanism of the ligand volume controlled Pd（PR3）2 （PR3=PH3, PMe3, and PtBu3） oxidative addition with aryl bromide were investigated, using density functional theory method with the conductor-like screening model. Association pathway and dissocia-tion pathway were investigated by the comparison of several energies. The cleavage energy of Pd（PR3）2 complex was calculated, as well as the oxidative addition reaction barrier energy of Pd（PR3）n （n=1,2） with aryl bromide in N,N-dimethylformamide solvent. This study proved that the ligands volume possessed a great impact on the mechanism of oxidative addition： less bulky ligand palladium associated with aryl bromide via two donor ligands,but larger bulky ligand palladium coordinated via monoligand.展开更多
Phenylthio-carboxylates were computed at the B3LYP/6-31G* level with DFT method. Based on linear solvation energy theory, the structural parameters were firstly taken as theoretical descriptors, and the correspondin...Phenylthio-carboxylates were computed at the B3LYP/6-31G* level with DFT method. Based on linear solvation energy theory, the structural parameters were firstly taken as theoretical descriptors, and the corresponding linear solvation energy relationship (LSER) equation (r = 0.8989) to the toxicity of photobacterium phosphoreum (–lgEC50) was thus obtained. Then the structural and thermodynamic parameters were taken as theoretical descriptors, and as a result the other corresponding correlation equation (r = 0.9274) relating to –lgEC50 was provided. The two equations achieved in this work by B3LYP/6-31G* are both more advantageous than that from AM1.展开更多
基金funded by the 973 National Basic Research Program of China (2003CB415002)China Postdoctoral Science Foundation (No. 2003033486)
文摘Optimized calculations of 209 polychlorinated diphenyl ethers （PCDEs） and diphenyl ethers were carried out at the B3LYP/6-31G^＊ level with the Gaussian 98 program. Based on the theoretical linear solvation energy relationship （TLSER） model, the obtained structural parameters were taken as theoretical descriptors to establish the novel QSPR model for predicting aqueous solubility （-lgSw） of PCDEs. The model obtained in this work contains two variables： mean molecular polarizability （a） and the most positive partial charge on a hydrogen atom （qH^＋）, of which RE = 0.9606 and SD = 0.32. And the results of cross-validation test also show that the model exhibits optimum stability and better predictive power. Moreover, the predictive power of the new model is better than that of MCIs method.
基金This work was supported by the Natural Science Foundation of Heilongjiang Province (No. B0313) and Research Foundation of China University of Mining and Technology
文摘Many attempts have been made to control the regioselectivity for olefin poly- merization by varying the structures of ligands in catalysts. The regioselectivity of propylene polymerization was investigated by replacing a nitrogen atom in the Pd(II) diimine catalyst with an oxygen atom from density functional theory method at the B3LYP/LANL2DZ level. The results show that the 1,2-insertion becomes a rival mechanism to the 2,1-insertion when the nitrogen atom is replaced by the oxygen atom leading to an asymmetric environment in the catalyst, and that the steric effect in the asymmetrical catalyst plays an important part in the polymerization. The insertion barrier from 2-O is much higher than that from 2-N. A pyramid transition state was characterized for the catalyst to convert 2-O back to 2-N through internal rotation. The propylene prefers to coordinate at the opposite side of O in the catalyst. This is the driving force for the internal rotation. The results are significant for isotactic and syndiotactic polymerization.
文摘Liquid-phase acrylic acid hydration over solid-phase catalysts is a key reaction for the industrial productionof 3-hydroxypropionic acid. However, the relevant literature primarily focuses on the experimental aspects of catalystscreening and exploring reaction conditions, with few accurate descriptions of the reaction kinetics and determination ofthe reaction mechanism. Here, we combined kinetics experiments and theoretical calculations to elucidate the kinetics andmechanism of acrylic acid hydration on a resin catalyst. The pseudo-homogeneous model, and Langmuir-Hinshelwood-Haugen-Watson and Elie-Riedel (ER) heterogeneous models were used to explain the experimental kinetics data. TheER model can explain the experimental data very well, suggesting strong adsorption of acrylic acid on the surface of theresin catalyst. Furthermore, density functional theory calculations show that the hydration follows a stepwise, rather than aconcerted, reaction pathway. The present study provides theoretical insights into the reaction mechanism and kinetics, fillingthe gap in our understanding of the reaction on a fundamental level.
基金supported by the National Natural Science Foundation of China(21773138)
文摘Sodium azide is a widely used inorganic compound. Besides the commonly used method of ＂Wislicenus process＂ which uses ammonia, nitrous and sodium as materials, the hydrazine hydrate route is also employed for the preparation of sodium azide particularly in laboratory. However, because many species are involved in the reaction system, the reaction details for the hydrazine hydrate route are still unclear. A comprehensive understanding of the reaction mechanism may provide meaningful help for optimizing the production process. In this work, the reaction mechanism for the synthesis of sodium azide by hydrazine hydrate route has been studied using density function theory（DFT） method. On the basis of our calculations, the reaction details, including the energetics of ten elementary steps, the structures of intermediates and transition states as well as the influence of inorganic acids and alcohols, were illuminated at the atomistic level. Both the two steps, the generation of key intermediate（NH2-NH-NO） and the trans-cistransformation of NH2-NH-NO, are suggested to be the possible rate-limiting step, corresponding to the energy barriers of 20.3 and 22.7 kcal/mol, respectively. In the early reaction steps to generate NH2-NH-NO, the main role of sulphuric acid is to donate proton, which can be replaced by nitric acid or hydrochloric acid. From the energy point of view, isopropanol has similar reactivity as methanol and ethanol.
文摘A series of ruthenium azopyridine complexes have recently been investigated due to their potential cytotoxic activities against renal cancer (A498), lung cancer (H226), ovarian cancer (IGROV), breast cancer (MCF-7) and colon cancer (WIDR). Thus, in order to predict the cytotoxic potentials of these compounds, quantitative structure-activity relationship studies were carried out using the methods of quantum chemistry. Five Quantitative Structure Activity Relationship (QSAR) models were obtained from the determined quantum descriptors and the different activities. The models present the following statistical indicators: regression correlation coefficient R2 = 0.986 - 0.905, standard deviation S = 0.516 - 0.153, Fischer test F = 106.718 - 14.220, correlation coefficient of cross-validation = 0.985- 0.895 and = 0.010 - 0.001. The statistical characteristics of the established QSAR models satisfy the acceptance and external validation criteria, thereby accrediting their good performance. The models developed show that the variation of the free enthalpy of reaction , the dipole moment μ and the charge of the ligand in the complex Ql, are the explanatory and predictive quantum descriptors correlated with the values of the anti-cancer activity of the studied complexes. Moreover, the charge of the ligand is the priority descriptor for the prediction of the cytotoxicity of the compounds studied. Furthermore, QSAR models developed are statistically significant and predictive, and could be used for the design and synthesis of new anti-cancer molecules.
基金This work was supported by the National Natural Science Foundation of China (No. 20737001)(2003CB415002)China Postdoctoral Science Foundation (No. 2003033486)
文摘Optimized calculations of 75 PCDDs and their parent DD were carded out at the B3LYP/6-31G＊ level by density functional theory （DFT） method. The structural parameters were obtained and significant correlation between the C1 substitution position and some structural parameters was found. Consequently, the number of C1 substitution positions was taken as theoretical descriptors to establish two novel QSPR models for predicting lgKow and -lgSw of all PCDD congeners. The two models achieved in this work contain two variables （Na and Nβ）, of which r = 0.9312, 0.9965 and SD = 0.27, 0.12 respectively, and t values are all large. The variation inflation factors （VIF） of variables in the two models herein are both less than 5.0, suggesting high accuracy of the lgKow and -lgSw predicting models, and the results of cross-validation test also show that the two models exhibit optimum stability and good predictive power. By comparison, the correlation and predictive ability of the present work are more advantageous than those obtained using semi-empirical AM1 and GC-RI methods.
基金This work was supported by the National Natural Science Foundation of China （No.20776089） and the New Century Excellent Talents Program of Ministry of Education （No.NCET-05-0783）. The State Key Laboratory of Polymer Materials Engineering in Sichuan University was acknowledged for providing dmol3 modules and Prof. Ying Xue, Xiang-yuan Li, and Quan Zhu were grateful for the useful discussions.
文摘The process and mechanism of the ligand volume controlled Pd（PR3）2 （PR3=PH3, PMe3, and PtBu3） oxidative addition with aryl bromide were investigated, using density functional theory method with the conductor-like screening model. Association pathway and dissocia-tion pathway were investigated by the comparison of several energies. The cleavage energy of Pd（PR3）2 complex was calculated, as well as the oxidative addition reaction barrier energy of Pd（PR3）n （n=1,2） with aryl bromide in N,N-dimethylformamide solvent. This study proved that the ligands volume possessed a great impact on the mechanism of oxidative addition： less bulky ligand palladium associated with aryl bromide via two donor ligands,but larger bulky ligand palladium coordinated via monoligand.
基金This work was supported by the China Postdoctoral Science Foundation (No. 2003033486) National Natural Science Foundation of China (No. 20177008)
文摘Phenylthio-carboxylates were computed at the B3LYP/6-31G* level with DFT method. Based on linear solvation energy theory, the structural parameters were firstly taken as theoretical descriptors, and the corresponding linear solvation energy relationship (LSER) equation (r = 0.8989) to the toxicity of photobacterium phosphoreum (–lgEC50) was thus obtained. Then the structural and thermodynamic parameters were taken as theoretical descriptors, and as a result the other corresponding correlation equation (r = 0.9274) relating to –lgEC50 was provided. The two equations achieved in this work by B3LYP/6-31G* are both more advantageous than that from AM1.
