In this paper, an Ethernet controller SoC solution and its low power design for testability （DFT） for information appliances are presented. On a single chip, an enhanced one-cycle 8-bit micro controller unit （MCU）...In this paper, an Ethernet controller SoC solution and its low power design for testability （DFT） for information appliances are presented. On a single chip, an enhanced one-cycle 8-bit micro controller unit （MCU）, media access control （MAC） circuit and embedded memories such as static random access memory （SRAM）, read only memory （ROM） and flash are all integrated together. In order to achieve high fault coverage, at the same time with low test power, different DFT techniques are adopted for different circuits： the scan circuit that reduces switching activity is implemented for digital logic circuits; BIST-based method is employed for the on-chip SRAM and ROM. According to the fault-modeling of embedded flash, we resort to a March-like method for flash built in self test （BIST）. By all means above, the result shows that the fault coverage may reach 97%, and the SoC chip is implemented successfully by using 0.25 μm two-poly four-metal mixed signal complementary metal oxide semiconductor （CMOS） technology, the die area is 4.8×4.6 mm^2. Test results show that the maximum throughput of Ethemet packets may reach 7Mb·s^1.展开更多
Design for Testability(DFT) is critical in chip design.DFT techniques insert hardware logic to an original design,in order to improve testability of the chip,and thus reduce test cost significantly.In this paper,we in...Design for Testability(DFT) is critical in chip design.DFT techniques insert hardware logic to an original design,in order to improve testability of the chip,and thus reduce test cost significantly.In this paper,we introduces the most frequently used DFT techniques,then put emphasis on the DFT policy and the DFT realization of the NDSP25 chip core,and analyses the result at last.展开更多
基金Supported by the National High Technology Research and Development Program of China (2006AA01Z226)
文摘In this paper, an Ethernet controller SoC solution and its low power design for testability （DFT） for information appliances are presented. On a single chip, an enhanced one-cycle 8-bit micro controller unit （MCU）, media access control （MAC） circuit and embedded memories such as static random access memory （SRAM）, read only memory （ROM） and flash are all integrated together. In order to achieve high fault coverage, at the same time with low test power, different DFT techniques are adopted for different circuits： the scan circuit that reduces switching activity is implemented for digital logic circuits; BIST-based method is employed for the on-chip SRAM and ROM. According to the fault-modeling of embedded flash, we resort to a March-like method for flash built in self test （BIST）. By all means above, the result shows that the fault coverage may reach 97%, and the SoC chip is implemented successfully by using 0.25 μm two-poly four-metal mixed signal complementary metal oxide semiconductor （CMOS） technology, the die area is 4.8×4.6 mm^2. Test results show that the maximum throughput of Ethemet packets may reach 7Mb·s^1.
文摘Design for Testability(DFT) is critical in chip design.DFT techniques insert hardware logic to an original design,in order to improve testability of the chip,and thus reduce test cost significantly.In this paper,we introduces the most frequently used DFT techniques,then put emphasis on the DFT policy and the DFT realization of the NDSP25 chip core,and analyses the result at last.
