Influence of syngas components and ash particles on the radiative heat transfer in a radiant syngas cooler

Radiant syngas cooler(RSC)is widely used as a waste heat recovery equipment in industrial gasification.In this work,an RSC with radiation screens is established and the impact of gaseous radiative property models,gas components,and ash particles on heat transfer is investigated by the numerical simulation method.Considering the syngas components and the pressure environment of the RSC,a modified weighted-sum-of-gray-gases model was developed.The modified model shows high accuracy in validation.In computational fluid dynamics simulation,the calculated steam production is only 0.63%in error with the industrial data.Compared with Smith's model,the temperature decay along the axial direction calculated by the modified model is faster.Syngas components are of great significance to heat recovery capacity,especially when the absorbing gas fraction is less than 10%.After considering the influence of particles,the outlet temperature and the proportion of radiative heat transfer are less affected,but the difference in steam output reaches 2.7 t·h^(-1).The particle deposition on the wall greatly reduces the heat recovery performance of an RSC.

Operation optimization of prefabricated light modular radiant heating system:Thermal resistance analysis and numerical study

The utilization of prefabricated light modular radiant heating system has demonstrated significant increases in heat transfer efficiency and energy conservation capabilities.Within prefabricated building construction,this new heating method presents an opportunity for the development of comprehensive facilities.The parameters for evaluating the effectiveness of such a system are the upper surface layer’s heat flux and temperature.In this paper,thermal resistance analysis calculation based on a simplified model for this unique radiant heating system analysis is presented with the heat transfer mechanism’s evaluation.The results obtained from thermal resistance analysis calculation and numerical simulation indicate that the thermal resistance analysis method is highly accurate with temperature discrepancies ranging from 0.44℃ to−0.44℃ and a heat flux discrepancy of less than 7.54%,which can meet the requirements of practical engineering applications,suggesting a foundation for the prefabricated radiant heating system.

Numerical simulation of the influence factors of NO_(x) emission on a W-type radiant tube

The radiant tube burner was modeled and analyzed by the numerical simulation method to investigate the influence factors and rules of NO_(x) emissions in a W-type radiant tube.These factors,which include air preheating temperature,excess air coefficient,and fuel gas composition,were modified to study their effects on NO_(x) emissions under varying working conditions.Simulation results were compared with the theoretical calculation value based on chemical reaction equilibrium theory and the onsite experimental value to verify the simulation accuracy.The results show that NO_(x) emissions rise with increasing air preheating temperatures.NO_(x) production increases to an extreme value and then decreases during the oxygen-poor to oxygen-enriched process with the rise of the excess air coefficient.Enhancing the proportion of coke oven gas in the fuel gas raises the combustion temperature as well as the NO_(x) discharge.Both the thermal efficiency and NO_(x) emissions should be balanced.Therefore,the recommended values based on the simulation results are as follows:the air preheating temperature should not exceed 400℃,the excess air coefficient should be between 1.1 and 1.2,and the volume fraction of the coke oven gas should not exceed 30%.

基于TRNSYS的主动式建筑相变蓄冷空调系统模拟

以夏热冬冷地区的办公建筑为例,利用瞬态系统仿真程序(transient system simulation program, TRNSYS)构建主动式相变蓄能地板模块,建立了主动式相变蓄能地板空调系统和常规风机盘管加新风空调系统的仿真模型,对其节能性和经济性进行模拟计算.以典型日和供冷季晚间蓄冷运行工况为条件,研究冷冻水温对主动式相变蓄能地板的蓄释能特性、室温波动与热泵制冷系数的影响.结果表明:夜间相变蓄冷工况下,在满足每平方米冷负荷为74.78 W情况下,9℃为最佳供水水温;采取晚间低电价时段间歇运行蓄冷热泵的方案,能够有效提高热泵运行时的制冷系数,并降低运行费用;主动式相变蓄能地板空调系统供冷季的能耗相比于常规风机盘管加新风空调系统减少30.5%,运行费用减少44.24%,夏季制冷综合能效比达到了2.38.

基于CFD的辐射冷顶板与风扇耦合系统性能优化

吸音板用来解决辐射式天花板供冷系统的噪声问题,但其阻碍了辐射换热。本文提出通过风扇的调风作用来优化辐射冷顶板与风扇耦合系统,基于CFD模拟讨论了耦合系统的室内气流分布、热舒适及换热系数变化,研究了吸音板安装方式、风扇转速和风扇转向对辐射天花板性能的影响。结果表明:风扇的加入增大了顶板的对流换热系数和总换热系数;随着风扇转速的增大,室内的空气温度和人体热舒适性评价指标(PMV)降低;风扇向上吹风的效果优于向下吹风,吸音板竖直安装优于水平安装。

冷辐射墙系统对室外热环境的改善

选取夏季沈阳西塔步行街作为研究对象,通过实地测量和PHOENICS软件模拟,对比分析了步行街的室外热环境。发现测量数据与模拟数据的趋势大体相同,并且有较好的拟合结果,验证了PHOENICS模拟软件对街区室外热环境模拟的可行性。同时通过热舒适评价指标UTCI评价了湿热天气下街区的热舒适,其中阴影区外的行人活动区域UTCI值达到42℃左右,街区平均UTCI达到37℃左右,属于极端热应力和很强的热应力范围。为改善步行街的室外热环境,建立了冷辐射墙系统,通过试验验证和数据分析证明了冷辐射墙系统对室外热环境有较好的改善效果。最后在PHOENICS模拟软件中,将冷辐射墙模型加到原有的街区模型中,模拟发现在加入冷辐射墙的3号楼附近,风速增加了1m/s,温度降低了3℃左右,验证了冷辐射墙系统在热湿天气下对街区室外热环境有很好的改善效果。

基于全景图的城市街谷平均辐射温度计算模型研究

在评估城市街谷热环境对居民生活质量的影响时,明确街谷的微气候条件,尤其是平均辐射温度(Mean Radiant Temperature,MRT)对于改善城市热环境具有重要意义。现阶段,利用基于鱼眼图的天空视域因子(Sky View Factor,SVF)计算方法较为繁琐且难以实现大范围街谷MRT的时空分布评估。因此,本研究旨在通过全景图像技术,提出一种快速大量计算城市街谷MRT时空分布的新方法,并进一步考虑城市街谷中树木的影响,以改进传统模型。本研究首先基于全景图像批量获取城市街谷中的SVF,并结合城市街谷中的几何特征和植被视域因子,通过改进的平均辐射温度计算模型对单点的MRT进行计算,同时采用定点实测数据对该模型进行精确度验证,并将其应用于西安市街谷MRT的实际计算中。研究结果显示,经过模型验证,本研究方法具有较高的精度,相对误差大多数情况下在20%以内,RMSE在2.85~4.66℃。同时,模型与实测数据的一致性较好,能够清晰地反映MRT的变化趋势,R2大于0.74,IA大于0.80。与仅考虑单一不透水面的计算模型相比,考虑树木植被后的模型精度有明显提升,RMSE从5.15℃降至3.87℃,模型的R2由0.72提升至0.74,表明改进模型与观测结果具有更好的一致性。提出的基于全景图的MRT计算方法不仅提高了评估城市街谷热环境的效率和精度,而且通过考虑树木植被的影响,为城市规划和绿化管理提供了更加科学的指导。此外,本研究的方法和结论能够为城市热岛效应的缓解和城市生活环境的改善提供理论依据和技术支持。通过实例分析,研究成功地应用于西安市,展示了2021年7月14日上午9:00的街谷MRT分布图,为后续的城市热环境评估和改善工作奠定了基础。

三线建设工业遗产活化利用探究——以泸州茜草坝为例

三线建设时期,泸州茜草坝在全国支援下崛起了关系紧密的长江起重机、长江挖掘机和长江液压件三座大中型工程机械厂,快速形成了泸州的现代化“机械王国”。自1965年以来,三厂历经迁建、合并、分厂、改制。迁厂后,现仅留下长江起重机厂旧址作为城市文化活动区域。就茜草坝三线工业遗址的保护与利用而言,可通过对茜草坝新型工业博物馆建设、“互联网+”远程云教育等方式的综合运用,打造以茜草坝三线工业遗址为中心,泸州市各区县红色、自然景观等为主节点,构建集三线文化、红色文化与自然景观于一体的辐射式跨市域文旅圈,从而促进茜草坝三线工业遗产活化,并以此推动以三线工业遗产为主题的区域旅游事业发展。

高海况下客滚船风浪阻力和功率航速预报

高海况下风浪阻力对客滚船航速预报的准确性有很大影响。对此,以某型客滚船为例,分别采用二维方法和三维方法预报船舶升沉和纵摇运动,采用全浪向波浪增阻预报方法SNNM计算波浪增阻,在此基础上开展高海况下的功率航速预报,并与模型试验结果进行对比分析。研究表明:当航速较低时,采用二维方法与三维方法预报的升沉运动结果的精度接近,随着速度的增加,二者的差异变大;当航速较高时,采用三维方法预报的纵摇结果比试验结果大,采用二维方法预报的纵摇结果比试验结果小;长波范围内采用SNNM方法预报的波浪增阻偏小,当谱峰周期为7 s和9 s时,采用SNNM方法近似预报的功率与试验值较为接近,但当谱峰周期变大时,近似预报结果偏小;整体来看,采用SNNM方法得到的航速预报值比试验值大。

Cooling performance analysis of radiant panel at different positions

The influence of the panel position on the cooling performance of a radiant panel is analyzed.The coupled simulation of convection and radiation is set up by a computational fluid dynamics（CFD）method.The simulations with different panel positions and different indoor heat sources are used to calculate the cooling capacity of the radiant panel and the indoor thermal environment.The simulation results are in good agreement with the experimental results.The results show that when the indoor heat source temperature is low,the convective heat flux is the main influence factor of the cooling capacity and the radiant panel should be placed on the wall or on the ceiling.Otherwise,when the indoor heat source temperature is high,the radiation heat flux is the main factor and the radiant panel should be placed as near to the heat sources as possible.

Experimental study and energy saving analysis of a novel radiant ceiling heating system

In order to have an in-depth understanding of the metal ceiling radiant panel with capillary tubes, a radiant ceiling heating system is constructed to study the actual heating performance and thermal comfort by experiments. In addition, the energy saving potential of the novel heating system is discussed in terms of the COP （coefficient of performance） of the ground source heat pump and the exergy efficiency of the radiant terminal. The results indicate that the heating system shows high thermal stability and thermal comfort. When the system reaches a stable condition, the radiant heat transfer accounts for 62.7% of the total heat transfer, and the total heat transfer can meet the heating demands of most buildings. Compared to a radiant floor heating system, it offers advantages in a shorter preheating time, a lower supply water temperature and a stronger heating capability. The COP of the ground source heat pump is increased greatly when the supply water temperature is 28 to 33 ℃, and the exergy efficiency of the metal ceiling with capillary tubes is 1.6 times that of the radiant floor when the reference temperature is 5 ℃ The novel radiant ceiling heating system shows a tremendous energy saving potential.

Experimental investigation on heat transfer characteristics of a new radiant floor system with phase change material

In order to improve the heat transfer characteristics of the traditional phase change material（PCM） floor, a new double-layer radiant floor system with PCM is proposed, which can store thermal or cold energy in the off-peak period and use them in the peak period. An experimental setup was developed to study the heat transfer characteristics of the new system under both cooling and heating modes. The experimental results show that the double-layer radiant floor system with PCM can meet both the cold and thermal requirements of users. Moreover, with the same duration of the thermal energy storage process, the increase of water temperature supplied to the system can improve the heat transfer characteristics of the system but lead to the discomfort of users. On the other hand, if the air temperature at the end of the thermal energy storage process is the same under different conditions, the increase of supplied water temperature will decrease the thermal energy storage time and ensure the comfort of users.

绿色高层建筑室内太阳辐射热量估算仿真研究

绿色建筑窗体太阳辐射热量预测实时性低且准确性差,为解决上述问题,提高研究的实用性,基于外环境数据处理,在相关性分析与聚类分析的基础上,提出一种数据处理与数据预测相融合的建筑室内太阳辐射热量预测算法,即PKM_SVR算法。算法首先对外环境数据进行预处理,然后在Dynamic Daylighting中构建房屋建筑主体;接着对室外环境数据进行匹配,通过选则窗体透射率,计算该状态下室内逐块辐射热量;然后对室内辐射热量与室外环境数据进行相关性分析与聚类处理,并将处理后的数据划分成训练、测试集;最后基于交叉验证的方法构建优化PKM_SVR室内辐射热量初始预测模型。仿真结果表明,十折交叉算法对模型优化效率最高,此时G=0.692、C=5.824,且R^(2)=0.925;对比仿真结果表明,较其它基线算法模型相比,PKM_SVR模型具有最低的RMSE指标参数,较ANN与SVM模型相比,分别降低了23.1%和31.3%,且具有较高的R^(2)指标参数,平均提升了10.7%。综上所述,PKM_SVR算法有效的提升了室内热量预测的准确率,具有重要的仿真价值。

不同气候区典型城市室内辐射空调高透膜防结露特性

辐射供冷空调系统具有节能和舒适的优点,但结露问题限制其应用推广。在冷板外加红外高透膜,可以在升高红外高透膜与室内空气接触面温度的同时,保证空调系统的辐射制冷量,达到降低辐射空调结露的风险。构建了红外透射膜辐射制冷的传热模型,计算了高透膜红外透过率对露点温度及辐射冷量的影响,预测了不同气候区典型城市自然通风防结露的最小透过率及相应最大制冷量,从而评估不同气候区辐射制冷利用红外透射膜的潜力,最后评估了高透膜红外透过率对人体热舒适性的影响。研究结果表明:建立的辐射热传递模型可以准确预测室内膜面传热过程;在保证辐射冷量的前提下,透射膜可以提高不凝水露点温度阈值4~17℃;不同城市要求的最小透过率不同,呼和浩特最低为0.4,重庆最高为0.95。红外透射膜可作为一种新型方法用于辐射空调冷源壁面的防结露,研究可为透射膜的设计及选择提供参考。

辐射废锅内辐射屏水冷管热变形数值模拟研究

煤气化技术是煤炭清洁高效利用的有效途径,其中带辐射废锅的气流床气化工艺能够有效回收高温合成气显热,提高能源利用率。辐射废锅内部增设辐射屏水冷管,可在保持辐射废锅水冷壁整体结构紧凑的同时提高传热面积。为研究气化炉操作条件下辐射废锅内辐射屏水冷管的热变形,利用流体−结构耦合原理建立三维辐射屏模型进行模拟分析。模拟结果表明:在正常操作工况下,水冷管整体在距顶部5.30 m处温度达到最大值。在周向方向上,最靠近炉膛中心的1号水冷管表面温度成抛物线形分布,向火侧中间位置温度最高,向火侧和背侧最大温差达到60 K;在相邻水冷管的冷却作用下,2~5号水冷管表面温度成双峰状分布。水冷管的空间布置直接影响水冷管表面的温度分布。未加固定的辐射屏水冷管中最靠近炉膛中心的1号水冷管局部变形量最大为5.20 cm,π方向的最大偏移量为4.58 cm,超过相邻水冷管的间距,水冷管之间易发生碰撞。水冷管间增加固定后,水冷管发生整体变形,最大热变形量为3.28 cm,较未加固定的减小36.9%,π方向的相对偏移基本消失,水冷管之间的局部变形远小于管间距。增加固定可有效避免水冷管之间的碰撞。进口合成气温度和表面沉积的变化不同程度影响水冷管表面温度梯度和变形量,偏移方向均为水冷管的π/2侧。

Thermal comfort assessment and energy consumption analysis of ground-source heat pump system combined with radiant heating/cooling

A new ground source heat pump system combined with radiant heating/cooling is proposed, and the principles and the advantages of the system are analyzed. A demonstration of the system is applied to a rebuilt building： Xijindu exhibition hall, which is located in Zhenjiang city in China. Numerical studies on the thermal comfort and energy consumption of the system are carded out by using TRNSYS software. The results indicate that the system with the radiant floor method or the radiant ceiling method shows good thermal comfort without mechanical ventilation in winter. However, the system with either of the methods should add mechanical ventilation to ensure good comfort in summer. At the same level of thermal comfort, it can also be found that the annual energy consumption of the radiant ceiling system is less than that of the radiant floor system.

城市下垫面辐射热作用过程差异分析

为了研究城市不同下垫面辐射热作用过程的差异,选取4种下垫面(草地、混凝土、铺面砖、沥青)为研究对象,测量不同下垫面反射的短波辐照度、向上的长波辐照度、地表热流强度以及空气温度、风速等环境参量。分析对比不同下垫面辐射热传递过程中的差异。结果表明:大气逆辐照度占下垫面吸收辐射热的65%以上,4种下垫面以长波辐射的形式释放热量均在75%以上;下垫面与空气间的换热主要以辐射换热的方式进行;夏季草地热稳定性最好,混凝土下垫面的热稳定性最差;冬季混凝土的热稳定性最好,铺面砖的热稳定性最差。

基于辐射型反射涂层的热控制墙体性能分析

为评估基于辐射型反射涂层的热控制墙体节能效果,解决相关评测体系缺失问题,建立墙体瞬态传热模型,探究复杂气候交变环境下墙体温度和热流的动态特性,以及辐射换热在被动式制冷过程中的热调控作用,基于热流和墙体传热系数提出一种新的评估模型进行性能评价.结果表明:在室内空调开启情况下,热控制墙体相比于普通墙体,其外表面温度平均下降10.74%,热流提升了281.54%;在夏热冬暖地区,建筑南侧涂覆辐射型反射涂层效果最佳,涂层可以降低建筑全年冷负荷87.8 MJ/m2;在夏热冬冷地区,建筑西面涂覆辐射型反射涂层可以降低建筑全年总负荷26.3 MJ/m2.所提出的性能评价指标能够刻画热控制墙体一天内的传热过程和传热特性,进而得到墙体的折合传热系数,对指导实际建筑施工、降低建筑全生命周期总能耗有重要意义.

热辐射特征参数对快堆锥形顶盖空间换热特性影响的研究

池式钠冷快堆的钠池内充满高温液态钠,其上方覆盖有氩气,高温液态钠主要通过辐射换热及对流换热的方式向快堆主容器上部结构及氩气空间传递热量,其换热特性及其影响因素十分复杂。辐射发射率及液态钠蒸发形成的气溶胶层对主容器上部结构的热工水力特性会造成一定影响。因此,为保证主容器上部结构在不同温度载荷下的安全性与稳定性,十分必要获取不同辐射发射率及不同气溶胶层分布下的温度分布。本研究建立大型池式钠冷快堆主容器上部锥形顶盖空间(以下简称“锥顶盖”)数值计算模型,开展数值模拟计算,得到不同发射率及气溶胶层厚度影响下锥顶盖的温度场。研究结果表明,发射率越高,锥顶盖斜肩及氩气空间温度越高;当气溶胶层存在于靠近钠液面的高度范围时(0~0.2 m),增加其厚度可使氩气空间局部温度升高,但对锥顶盖斜肩温度影响有限。发射率增高53%,则辐射换热量增加31.47%,格拉晓夫数(Gr)减少19.29%,辐射换热效果增强,自然对流效果减弱;气溶胶层高度由0增加到0~0.1 m时,对辐射换热量的吸收增加22.68%,格拉晓夫数(Gr)减少19.29%,气溶胶层高度由0~0.1 m增加到0~0.2 m时,透过气溶胶层的辐射换热量减少了0.04%,格拉晓夫数(Gr)增加了0.9%,辐射换热效果减弱,自然对流效果加强。

高原铁路站房地板辐射系统的分区供暖效果

为了解决高原铁路站房部分区域在强太阳辐射的影响下出现过热、地板辐射供暖系统能耗浪费的问题,以某高原铁路车站为研究对象,根据站房内太阳照射情况对地板辐射系统提出了分区供暖方案;利用建筑能耗模拟软件Energyplus对该铁路站房进行模拟分析,对比了地板辐射系统分区前后站房内的热环境和系统供暖量.结果表明:地板辐射系统采用统一的设计及运行控制方案供暖时,站房内太阳直射影响区的平均操作温度在日间最高可达27℃,与非直射影响区之间的温差超过5℃;在地板辐射系统分区供暖时,直射影响区的平均操作温度最高为26℃,室内温度分布更为均匀,局部过热现象得到缓解;在保证站房热舒适性的前提下,地板辐射系统的分区供暖方案能够使直射影响区整个供暖季的供暖量降低38.2%.