Structural Analysis for Qazzaz Metamorphic Core Complex,Northwestern Arabian Shield,Saudi Arabia

Identifying deformational mechanisms and associated structures at various scales,ranging from regional-scale structures to microscopic fabric,is crucial for the assessment of tectonic development.Thirty-three samples were taken from the Qazzaz metamorphic core complex to estimate the finite strain for felsic and mafic minerals.These samples included gneisses rocks,monzogranite,and metavolcano-sedimentary rocks for both the Thalbah and Bayda groups.Using the Rf/j and Fry methods,the axial ratios(XZ)range about 2.20 to 7.10 and 1.90 to 9.10,respectively.For various rock units,the strain measurements show moderate to highly deformation.Most of the observed samples show shallow WNW dipping along a N to WNW trend of finite strain(X).The short axes(Z)based to be subvertical foliation related with a subhorizontal foliation.The results demonstrate that contacts generated at semi-brittle to ductile deformation and that the strain of magnitude has the same value for different lithologic units.It concluded that nappe generation in orogens results from pure shear deformation.

Structural,^(40)Ar/^(39)Ar Geochronological and Rheological Feature Analysis of the Guoxuepu Shear Zone:Indications for the Jitang Metamorphic Complex in the Northern Lancangjiang Zone

The Jitang metamorphic complex is key to studying the tectonic evolution of the Northern Lancangjiang zone.Through structural-lithological mapping,structural analysis and laboratory testing,the composition of the Jitang metamorphic complex was determined.The macro-and microstructural analyses of the ductile detachment shear zone(Guoxuepu ductile shear zone,2–4 km wide)between the metamorphic complex and the overlying sedimentary cap show that the shear sense of the ductile shear zones is top-to-the-southeast.The presence of various deformation features and quartz C-axis electron backscatter diffraction(EBSD)fabric analysis suggests multiple deformation events occurring at different temperatures.The average stress is 25.68 MPa,with the strain rates(έ)ranging from 9.77×10^(−14)s^(−1)to 6.52×10^(−16)s^(−1).The finite strain of the Guoxuepu ductile shear zone indicates an elongated strain pattern.The average kinematic vorticity of the Guoxuepu ductile shear zone is 0.88,implying that the shear zone is dominated by simple shear.The muscovite selected from the protomylonite samples in the Guoxuepu ductile shear zone yields a 40Ar-39Ar age of 60.09±0.38 Ma.It is suggested that,coeval with the initial Indo–Eurasian collision,the development of strike-slip faults led to a weak and unstable crust,upwelling of lower crust magma,then induced the detachment of the Jitang metamorphic complex in the Eocene.

Multistage Extension and Age Dating of the Xiaoqinling Metamorphic Core Complex,Central China

Abstract There are two extensional systems in the Xiaoqinling metamorphic core complex (XMCC). One is the detachment fault system developed along the peripheries of the XMCC, which extended in an ESE-WNW direction and whose upper plate moved towards the WNW. The other extensional system includes the retrograde shear zones and normal faults developed within the XMCC, which represent the collapse of the XMCC. Ar-Ar and K-Ar dating shows that the extension of the detachment fault system continued from 135 to 123 Ma, i.e. in the late stage of its evolution at about 127 Ma. The collapse represented by the extensional system within the XMCC was operative during 120–106 Ma, and its main activity occurred about 116 Ma ago. These suggest that the XMCC experienced two extensional stages in its evolution, i.e., the syn-orogenic regional extension and post-orogenic collapse extension.

Extension of the Louzidian Metamorphic Core Complex and Development of Supradetachment Basins in Southern Chifeng,Inner Mongolia,China

The Louzidian metamorphic core complex (LMCC) in southern Chifeng is located on the northern margin of the North China craton. Structural analyses of the LMCC and its extensional detachment system indicate that the LMCC experienced two-stage extension. The ductile regime experienced top-to-northeast shearing extension and the brittle detachment fault underwent top-down-outwards slipping. Between these two stages, a semi-ductile regime recorded the transition from ductile to brittle. The hanging wall of the detachment fault is similar to those classic supradetachment basins in western North America. Analyses of provenance and paleocurrent directions in the basins show that there were two filling stages. In the early stage, materials came from the southwest margin of the basin and the hanging wall of the detachment system and were transported from southwest to northeast; while in the late stage, deposits were derived from the footwall of the detachment fault and transported outwards to the two sides of the core complex. Since the filling period of the basins is from the late Jurassic to the late Cretaceous and it is coeval with the extension, the two filling stages reflect the two-stage history of the detachment fault. The large-scale late Jurassic underplating in the deep crust of the Chifeng area led to thickening and heating of the middle-upper crust and trigged the extension at depths and volcanism on the surface. In the early Cretaceous the upper plate of the detachment fault moved northeastwards and sediments were transported from southwest to northeast, while in the late Cretaceous the core complex was uplifted rapidly, the original basin was separated by the uplifted core, and lower-plate-derived debris was deposited in the adjacent upper-plate basins of the detachment fault. Evidentially, the development of the supradetachment basins were controlled by the extension and in turn the fillings in the basins recorded information of the extension, which has provided new evidence for kinematic interpretation of the Louzidian core complex.

Application of General Shear Theory to the Study of Formation Mechanism of the Metamorphic Core Complex:A Case Study of Xiaoqinling in Central China

: The kinematic vorticity number and strain of the mylonitic zone related to the detachment fault increase from ESE to WNW along the moving direction of the upper plate of the Xiaoqinling metamorphic core complex (XMCC) and the geometry of quartz c-axis fabrics changes progressively from crossed girdles to single girdles in the same direction. Therefore, pure shear is dominant in the ESE part of the XMCC while simple shear becomes increasingly important towards WNW. However, the shear type does not change with the strain across the shear zone, thus the variation of shear type is of significance in indicating the formation mechanism. The granitic plutons within the XMCC came from the deep source and their emplacement was an active and forceful upwelling prior to the detachment faulting. The PTt path demonstrates that magmatism is an important cause for the formation of the XMCC. The formation mechanism of the XMCC is supposed to be active plutonism and passive detachment. Crustal thickening and magmatic doming caused necking extension with pure shear, and magmatic heating and doming resulted in detachment extension with simple shear and formed the XMCC.

The Liaonan Metamorphic Core Complex: Constitution, Structure and Evolution

The Liaonan metamorphic core complex （mcc） has a three-layer structure and is constituted by five parts, i.e. a detachment fault zone, an allochthonous upper plate and an supradetachment basin above the fault zone, and highly metamorphosed rocks and intrusive rocks in the lower plate. The allochthonous upper plate is mainly of Neoproterozoic and Paleozoic rocks weakly deformed and metamorphosed in pre-Indosinan stage. Above these rocks is a small-scale supradetachment basin of Cretaceous sedimentary and volcanic rocks. The lower plate is dominated by Archean TTG gneisses with minor amount of supracrustal rocks. The Archean rocks are intruded by late Mesozoic synkinematic monzogranitic and granitic plutons. Different types of fault rocks, providing clues to the evolution of the detachment fault zone, are well-preserved in the fault zone, e.g. mylonitic gneiss, mylonites, brecciated mylonites, microbreccias and pseudotachylites. Lineations in lower plate granitic intrusions have consistent orientation that indicate uniform top-to-NW shearing along the main detachment fault zone. This also provides evidence for the synkinematic characteristics of the granitic plutons in the lower plate. Structural analysis of the different parts in the mcc and isotopic dating of plutonic rocks from the lower plate and mylonitic rocks from detachment fault zone suggest that exhumation of the mcc started with regional crustal extension due to crustal block rotation and tangential shearing. The extension triggered magma formation, upwelling and emplacement. This event ended with appearance of pseudotachylite and fault gauges formed at the uppermost crustal level. U-Pb dating of single zircon grains from granitic rocks in the lower plate gives an age of 130±2.5 Ma, and biotite grains from the main detachment fault zone have ^40Ar-^39Ar ages of 108-119 Ma. Several aspects may provide constraints for the exhumation of the Liaonan mcc. These include regional extensional setting, cover/basement contact, temporal and spatial coupling of extension and magmatism, basin development and evolution of fault tectonites along detachment fault zone. We propose that the exhumation of the Liaonan mcc resulted from regional extension and thinning of crust or lithosphere in eastern North China, and accompanied with synkinematic intrusion of granitic plutons, formation of detachment fault zone, uplifting and exhumation of lower-plate rocks, and appearance of supradetachment basin.

Metamorphic Core Complexes and Its Significance in the Continental Crustal Evolution

Metamorphic core complexes are a basic structural pattern related to extensional tectonics. Several characteristics of different scales of metamorphic core complexes in the Fangshan and Yunmengshan (Beijing) , Zhongtiaoshan (Shanxi) , and Dengfong (Henan) are examined. A three-layer model for metam orphic core complexes is suggested . The conclusion is that metam orphic core complexes are the result of multiphase intracontinental crustal extensions and are an important tectonic pattern. which exposes the basement metam orphic rocks to the ground surface in the intracontinental cover .

Geochemistry and Petrogenesis of Neoarchean Metamorphic Mafic Rocks in the Wutai Complex

Neoarchean metamorphic mafic rocks in the lower and the middle Wutai Complex mainly comprise metamorphic gabbros, amphibolites and chlorite schists. They can be subdivided into three groups according to chondrite normalized REE patterns. Rocks in Group #1 are characterized by nearly flat REE patterns （Lan/Ybn=0.86-1.3）, the lowest total REEs （29-52 ppm）, and weak negative to positive Eu anomalies （Eun/Eun=0.84-1.02）, nearly flat primitive mantle normalized patterns and strong negative Zr（Hf） anomalies. Their geochemical characteristics in REEs and trace elements are similar to those of ocean plateau tholeiite, which imply that this group of rocks can represent remnants of Archean oceanic crust derived from a mantle plume. Rocks in Group #2 are characterized by moderate total REEs （34-116 ppm）, LREE-enriched （Lan/Ybn=1.76-4.34） chondrite normalized REE patterns with weak Eu anomalies （Eun/Eun=0.76-1.16）, and negative Nb, Ta, Zr（Hf）, Ti anomalies in the primitive mantle normalized spider diagram. The REE and trace element characteristics indicate that they represent arc magmas originating from a sub-arc mantle wedge metasomatized by slab-derived fluids. Rocks in Group #3 are characterized by the highest total REEs （61-192 ppm）, the strongest LREEs enrichment （Lan/Ybn=7.12-16） with slightly negative Eu anomalies （Eun/Eun=0.81-0.95） in the chondrite normalized diagram. In the primitive mantle normalized diagram, these rocks are characterized by large negative anomalies in Nb, Ta, Ti, negative to no Zr anomalies. They represent arc magmas originating from a sub-arc mantle wedge enriched in slab-derived melts. The three groups of rocks imply that the formation of the Neoarchean Wutai Complex is related to mantle plumes and island-arc interaction.

Numerical modeling of metamorphic core complex formation:Implications for the destruction of the North China Craton

Widespread magmatism, metamorphic core complexes(MCCs), and significant lithospheric thinning occurred during the Mesozoic in the North China Craton(NCC). It has been suggested that the coeval exhumation of MCCs with uniform northwest-southeast shear senses and magmatism probably resulted from a decratonization event during the retreat of the paleo-Pacific Plate. Here we used two-dimensional finite element thermomechanical numerical models to investigate critical parameters controlling the formation of MCCs under far-field extensional stress. We observed three end-member deformation modes: the MCC mode, the symmetric-dome mode, and the pure-shear mode. The MCC mode requires a Moho temperature of ≥700 ℃ and an extensional strain rate of ≥5 × 10^(-16)s^(-1), implying that the lithosphere had already thinned when the MCC was formed in the Mesozoic. Considering that the widespread MCCs have the same northwest-southeast extension direction in the NCC, we suggest that the MCCs are surface expressions of both large-scale extension and craton destruction and that rollback of the paleo-Pacific slab might be the common driving force.

Mineral Chemistry and Geothermometry of Amphibole and Plagioclase in the Metabasites, Located at the Tanbour Metamorphic Complex in Southern Iran

Metabasite refers to metamorphosed basalts and other mafic igneous rocks (rich in iron and magnesium). When a mafic igneous rock is subjected to new pressure and temperature conditions during metamorphism, these chemical components will rearrange themselves to form new minerals. Metabasites can be found in many metamorphic belts including Sanandaj-Sirjan metamorphic belt of Iran. The study area is a Tanbour metamorphic complex in Eastern of Sirjan city, which is geologically located at the Sanandaj-Sirjan metamorphic belt in Southern Iran. Metabasite in this complex consists of greenschist, epidote amphibolite and amphibolite. Amphibole and plagioclase are the main minerals in the greenschist and amphibolite, and the a secondary mineral in some micaschist seen in the study area. The electron microprobe analysis was done on this mineralization in greenschist, epidote amphibolite and amphibolite, which showed that the amphiboles in greenschist was a member of the calcic group and Actinolite type, and the amphiboles in epidote amphibolite was a member of the calcic group and these amphiboles were tschermakite up to Ferro-Tschermakite + Ferro-Hornblende type. The amphibole in amphibolite is a member of the calcic group and this amphibole is Magnesio-Hornblende type. The plagioclases in the greenschist is pure albite (An 3.29 - 3.6), and in the epidote amphibolite is oligoclase (An 19.5 - 24.2), while in the amphibolites is oligoclase (An 16.9 - 26.6). The estimated P–T conditions are in favor of their metamorphism under epidote amphibolite (550°C and 8 kbar) and amphibolite (611°C - 652° Cand 10.5 kbar) facies.

Dating for Jifanggou metamorphic complex in central Jilin and its tectonic implications

Based on the results of four regional geological surveys of 1: 50000 including Shulan County map in Jilin,taking Shulan area as the study area,the authors re-delineated the rock type assemblages,e.g. metamorphic rhyolite,metamorphic tuffaceous breccia lava,sericite-quartz schist and tremolite altered rock,etc.,and the structural contacts between them. With the help of in-situ LA-ICP-MS U-Pb dating for zircons,it is concluded that the zircon crystallization ages of the metamorphic rhyolite,the metamorphic andesitic tuff breccia lava and the tremolite altered rock are 339. 1 ± 1. 3 Ma( n = 27,MSWD = 0. 78),351. 8 ± 1. 7 Ma( n = 21,MSWD = 0.82),and 362.0±1.8 Ma( n = 43,MSWD = 2.2) respectively. The metamorphic complex is actually a set of tectonic melange which comprises the rocks in different types,sources,times,or tectonic settings,and was formed by tectonism.

FEM simulation of formation of metamorphic core complex with ANSYS software

This study utilizes ANSYS to establish FEM's model of metamorphic core complex,and used thermal-structure analysis to simulate metamorphic core complex's temperature field and stress field.The metamorphic core complex formation mechanism is discussed.The simulation results show that the temperature field change appearing as the earth surface's temperature is the lowest,and the temperature of metamorphic core complex's nucleus is the highest.The temperature field is higher along with depth increase,and the stress field change appearing as the biggest stress occurs in the nucleus.The next stress field occurs at the top of the cover.

Structural Analysis of Jianglang Metamorphic Core Complex in Western Margin of yangtze Crston,Sichuan Province

There is a belt of metamorphic core complexes in the western margin of the Yangtze craton . The geological setting of the belt is similar to that of the Cordilleran metamorphic core complexes . A typical one in this belt is the Jianglang metamorphic core complex , which has a configuration consisting of three layers : a core complex consisting of Mesoproterozoic schist sequence . a ductile middle slab consisting of Paleozoic meta- sedimentary -basalt characterized by the development of ' folding layer' and an upper cover consisting of Xikang Group which has suffered both buckling and flattening . A detachment fault developed along the contact boundary between the cover and basement causes the omission of Upper Sinian and Cambrian at the base of cover . A lot of normal ductile shear zones developed in the cover causes the thinning of it . All the features show that the early extension results in the thinning of crust , but the formation of the dome and exposure of basement rocks may be the results of superimposing of the E-W directed contraction and the following southward thrusting during Indosinian to Yanshanian orogeny . Syntectonic plutonism and pervasive thermo - metamor-phism in the cover suggest that the thermal uplift also causes the uplift of the MCC .

Zonal Metamorphic Complex in the Tongulack Mountain Ridge, Altai, Russia, and Explanation ofIts Origin with the Help of Thermal Modelling

A moderate pressure/high temperature zonal metamorphic complex in the Tongulack Mountain Ridge, Altai, Russia, is described, and the applicability of the models of magmatic intrusion and fluid flow to explanation of its origin discussed. The Precambrian complex was formed at 500–700°C and 3.0–5.5 kbars; it is a linear, 25–30 km wide, thermal anticline with a curved axis showing symmetric metamorphic zoning. The metamorphism was isochemical by its nature, as is corroborated by the chemical compositions of the rocks. Four zones can be recognized within the metamorphic complex: chloritic (on the peripheries), cordieritic, sillimanitic and staurolite-out (in the centre). The zones are separated by successive isograds: cordierite, staurolite-in or sillimanite and staurolite-out. It is argued that the origin of the metamorphic zoning can be explained best by a combined fluid-magmatic model; conductive heat flow from the intrusion predominated considerably over the fluid flux in heat transfer: the fluid flow rate was estimated as about 3 ? 10?9 g/cm2, ? s. The modern position of the axial region of the metamorphic belt is predicted to be lying roughly about 1.5 km above the roof of the intrusive body.

Late Caledonian Orogenic Extensional Deformation and Metamorphic Core Complexes in Xuefengshan Area,Southern China

ＬａｔｅＣａｌｅｄｏｎｉａｎＯｒｏｇｅｎｉｃＥｘｔｅｎｓｉｏｎａｌＤｅｆｏｒｍａｔｉｏｎａｎｄＭｅｔａｍｏｒｐｈｉｃＣｏｒｅＣｏｍｐｌｅｘｅｓｉｎＸｕｅｆｅｎｇｓｈａｎＡｒｅａ，ＳｏｕｔｈｅｒｎＣｈｉｎａ＊ＨｏｕＧｕａｎｇｊｉｕＳｕｏＳｈｕｔｉａｎＦ...

Tonian–Ediacaran Tectonometamorphic History of the Sa'al Complex,Sinai(Egypt):Implications for the Tectonostratigraphic Framework of the Northern Arabian–Nubian Shield

The Sa'al Metamorphic Complex(SMC;southern Sinai)encompasses the oldest arc rocks in the Arabian–Nubian Shield,comprising two non-consanguineous metavolcanic successions(the Agramiya Group and the Post-Ra'ayan Formation)separated by the metasediments of the Ra'ayan Formation.It experienced three distinct deformational events(D_(1)–D_(3))and two low-medium grade regional metamorphic events(M_1–M_(2)).The Agramiya Group and the Ra'ayan Formation experienced all tectonometamorphic events(D_1–D_(3)and M_(1)–M_(2)),whereas the Post-Ra'ayan volcanic rocks were only affected by the D_(3)and M_(2)events.D_(1)is an extensional event and is connected to the late Rodinia break-up(~Tonian;900–870 Ma).The M_(1)metamorphism variably affected the older Agramiya Group,the rhyolitic tuffs experiencing lower to upper greenschist facies conditions and the basic and intermediate volcanic rocks undergoing amphibolite facies metamorphism.The Ra'ayan Formation metasediments experienced upper greenschist to amphibolite facies metamorphism.The upper greenschist facies M_(2)affected the youngest Post-Ra'ayan volcanic rocks and other stratigraphic successions.The compressive D_(2)and D_(3)events were coeval with the accretion of dismembered terranes in the assembly of Gondwana.D_(2)can be linked to the Tonian–Cryogenian arc-arc assembly(~880–760 Ma;in Elat and Sinai),whereas D_(3)and the accompanying M_(2)is constrained to 622–600 Ma(Ediacaran).

Phase equilibrium modelling of the amphibolite facies metamorphism in the Yelapa-Chimo Metamorphic Complex, Mexico

The Yelapa-Chimo Metamorphic Complex forms part of the Jalisco Block in western Mexico and exposes a wide range of Early Cretaceous metamorphic rocks;such as paragneiss,orthogneiss,amphibolites,and migmatites.However,the pressure-temperature(P-T)conditions of metamorphism and partial melting remain poorly studied in the region.To elucidate metamorphic P-T conditions,phase equilibrium modelling was applied to two sillimanite-garnet paragneisses,one amphibole-orthogneiss,and one amphibolite.Sillimanite-garnet paragneisses exhibit a lepidoblastic texture with a biotite+sillimanite+kyanite+garnet+quartz+plagioclase+K-feldspar mineral assemblage.Amphibole-orthogneiss and amphibolite display a nematoblastic texture with an amphibole+(1)plagioclase+quartz+(1)titanite assemblage and an amphibole+(2)plagioclase+(2)titanite+ilmenite retrograde mineral assemblage.Pseudosections calculated for the two sillimanite-garnet paragneiss samples show P-T peak conditions at~6-7.5 kbar and~725-740℃.The results for amphibole-orthogneiss and the amphibolite yield P-T peak conditions at~8.5-10 kbar and~690-710℃.The mode models imply that metasedimentary and metaigneous units can produce up to~20 vol%and~10 vol%of melt,respectively.Modelling within a closed system during isobaric heating suggests that melt compositions of metasedimentary and metaigneous units are likely to have direct implications for the petrogenesis of the Puerto Vallarta Batholith.Our new data indicate that the Yelapa-Chimo Metamorphic Complex evolved through a metamorphic gradient between~23-33℃km^-1and the metamorphic rocks formed at depths between~22 km and~30 km with a burial rate of~2.0 km Ma^-1.Finally,the P-T data for both metasedimentary and metaigneous rocks provide new constraints on an accretionary framework,which is responsible for generating metamorphism and partial melting in the YelapaChimo Metamorphic Complex during the Early Cretaceous.

Ontogeny and Metamorphic Patterns of Female Reproductive Organs of Ephedra sinica Stapf (Ephedraceae)

Ontogeny and metamorphic. development of female reproductive organs in Ephedra sinica Stapf were surveyed. At the end of April, female cones began to initialize from the vegetative buds. Pollination occurred in mid-May and seeds matured at the beginning of July. The ontogenetic pattern of female reproductive organs of E. sin ca is basically similar to that of E. distachya L. The foliar nature of the outer envelope of the ovule in Ephedra is corroborated. Reduction of ovule number as a tendency of speciation in the genus is substantiated by the occurrence of tri-ovulate cones coupled with comprehensive characters of the genus. The metamorphic patterns as well as the leaf nature of the outer envelope indicate that female cones of Ephedra are compound while the female reproductive units of the ovulate cone have been reduced from secondary reproductive shoots similar to those of cordaites by phylogenetic transformation, fusion and reduction. Each fertile bract together with its axillary female reproductive unit composed the Bract Scale and Seed Scale Complex of Ephedra.

Metamorphism of the northern Liaoning Complex:Implications for the tectonic evolution of Neoarchean basement of the Eastern Block,North China Craton

As one of the areas where typical late Archean crust is exposed in the Eastern Block of the North China Craton, the northern Laioning Complex consists principally of tonalitic-trondhjemitic-granodioritic （TTG） gneisses, massive granitoids and supracrustal rocks. The supracrustal rocks, named the Qingyuan Group, consist of interbedded amphibolite, hornblende granulite, biotite granulite and BIF. Petrological evidence indicates that the amphibolites experienced the early prograde （M1）, peak （M2） and post-peak （M3） metamorphism. The early prograde assemblage （M1） is preserved as mineral inclusions, represented by actinotite ＋ hornblende - plagioclase ＋ epidote ＋ quartz 4- sphene, within garnet porphyroblasts. The peak assemblage （M2） is indicated by garnet ＋ clinopyroxene ＋ hornblende ＋ plagioclase ＋ quartz ＋ ilmenite, which occur as major mineral phases in the rock. The post-peak assemblage （M3） is characterized by the garnet 4- quartz symplectite. The P-T pseudosections in the NCFMASHTO system constructed by using THERMOCALC define the P-T conditions of M1, M2 and M3 at 490-550 C＋（4.5 kbar, 780 810 C/7.65- 8.40 kbar and 630-670 ＋C]8.15-9.40 kbar, respectively. As a result, an anticlockwise P-T path involving isobaric cooling is inferred for the metamorphic evolution of the amphibolites. Such a P-T path suggests that the late Archean metamorphism of the northern Liaoning Complex was related to the intrusion and underplating of mantle-derived magmas. The underplating of voluminous mantle-derived magmas leading to metamorphism with an anticlockwise P-T path involving isobaric cooling may have occurred in continental magmatic arc regions, above hot spots driven by mantle plumes, or in continental rift envi- ronments. A mantle plume model is favored because this model can reasonably interpret many other geological features of late Archean basement rocks from the northern Liaoning Complex in the Eastern Block of the North China Craton as well as their anticlockwise P-T paths involving isobaric cooling.

New Findings in High-Pressure and Ultrahigh-Pressure Metamorphic Belt of Tongbaishan-Dabieshan Regions, Central China

The Tongbai Dabieshan high pressure (HP) and ultrahigh pressure (UHP) belt is sandwiched between the Yangtze and the Sinokorean cratons. It connects the Qinling orogenic belt in the west and links toward the east to the Sulu ultrahigh pressure (UHP) belt. At present there is a consensus that the UHP metamorphic rocks are the products of the oblique collision between the Yangtze and Sinokorean cratons during the Triassic. However, there is still a lot of controversies about the formation and exhumation of the HP and UHP metamorphic belts. The present research work on the composition and the structural geometry and kinetics of the HP and UHP metamorphic belt has shown the following new results: (1) The overall structural geometry pattern of Dabieshan is similar to the metamorphic core complex developed in the western North America; (2) The discoveries of HP and UHP metamorphic rocks in the north of Dabieshan indicate that the significance of Shuihou Wuhe fault should be re evaluated; (3) A series of micro structural evidence, including the newly found retrograde granulite facies assemblages in the garnet pyroxenites, substantiate the extensional processes following the collision event; (4) The discovery of partial melting phenomena in the UHP metamorphic belts illuminates the relationship between the HP and UHP metamorphic rocks and their associated granite gneiss. All of these new findings will greatly improve our understanding of the formation and exhumation of the high pressure and ultrahigh pressure metamorphic belts.