A control and data acquisition system was implemented for the recently developed collinear laser spectroscopy setup.This system is dedicated to data recording,storage,processing,monitoring of the beam intensity and en...A control and data acquisition system was implemented for the recently developed collinear laser spectroscopy setup.This system is dedicated to data recording,storage,processing,monitoring of the beam intensity and energy,and visualization of various spectra.In comparison to the conventional resonance nuclear reaction system,the key technique is the precise synchronization of the detected counts with the actual scanning voltage(or probing laser frequency).The functions of the system were tested by measuring the hyperfine structure spectra of stable calcium(e.g.,^(40)Ca^(+))and radioactive potassium(e.g.,^(38)K)in the bunched and continuous modes,respectively.This system will be routinely applied and further improved in subsequent laser spectroscopy experiments on unstable isotopes at the Beijing Radioactive Ion-beam Facility(BRIF).展开更多
With the continuous development and expansion of automotive industry,car safety problems are widely concerned by most of us. In order to make it easier to adjust car' s real-time body posture,it is necessary to de...With the continuous development and expansion of automotive industry,car safety problems are widely concerned by most of us. In order to make it easier to adjust car' s real-time body posture,it is necessary to design a real-time data acquisition system,thus reducing the number of casualties in normal driving. A brief account of the development status of data acquisition system at home and abroad,and the concept,principle,function of virtual instrument platform are given. The advantages and disadvantages of the data acquisition system,based on LabVIEW in different methods of data acquisition,are analyzed and compared,and put forward some improvements and optimization,so the real-time data acquisition system can meet the requirement of adjusting the state of the vehicle,improving real-time of data acquisition and processing. Finally,it indicates the development direction and prospect of data acquisition system based on LabVIEW.展开更多
A data acquisition system for testing gas sensor array response to multi-gas is presented.The testing system is based on the character of the gas response of metal oxide semiconductor gas sensor array.The data acquisi...A data acquisition system for testing gas sensor array response to multi-gas is presented.The testing system is based on the character of the gas response of metal oxide semiconductor gas sensor array.The data acquisition is realized automatically through the real time controlling of the data acquisition card PCI1711.This system is highly attractive for electronic nose,which is a powerful tool for the discrimination of gases.展开更多
A newly developed digital data acquisition system,which is based on the digital pulse processor Pixie-16 modules by XIA LLC,was tested with the c-ray detector array of the China Institute of Atomic Energy using the cr...A newly developed digital data acquisition system,which is based on the digital pulse processor Pixie-16 modules by XIA LLC,was tested with the c-ray detector array of the China Institute of Atomic Energy using the cray source and in-beam c-rays.A comparison between this digital data acquisition system and the conventional analog data acquisition system was made.At a low count rate,both systems exhibit good and comparable energy resolutions.At a high count rate above 8.8 k/s,while the energy resolution obtained by the analog system deteriorates significantly,the energy resolution obtained by the digital system is nearly unchanged.Meanwhile,experimental data with higher statistics can be collected by the digital system.The advantage of this digital system over the conventional analog system can be ascribed to its excellent capability of handling pile-up pulses at higher count rates,and the fact that it has nearly no dead time in data transmission and conversion.展开更多
To satisfy high-precision,widc-rangc,and real-time neutron flux measurement requirements by the International Thermonuclear Experimental Reactor(ITF.R),a data acquisition and control system based on fission chamber de...To satisfy high-precision,widc-rangc,and real-time neutron flux measurement requirements by the International Thermonuclear Experimental Reactor(ITF.R),a data acquisition and control system based on fission chamber detectors and fast controller technology,has been developed for neutron flux monitor in ITER Equatorial Port#7.The signal processing units which arc based on a field programmable gate array and the PXI Express platform arc designed to realize the neutron flux measurement with I ms time resolution and a fast response less than 0.2 ms,together with real-time timestamps provided by a timing hoard.The application of the wide-range algorithm allows the system to measure up to 10^10cps with a relative error of less than 5%.Furthermore,the system is managed and controlled by a software based on the Experimental Physics and Industrial Control System,compliant with COntrol.Data Access and Communication architecture.展开更多
A field-programmable gate array(FPGA)based high-speed broadband data acquisition system is designed.The system has a dual channel simultaneous acquisition function.The maximum sampling rate is 500 MSa/s and bandwidth ...A field-programmable gate array(FPGA)based high-speed broadband data acquisition system is designed.The system has a dual channel simultaneous acquisition function.The maximum sampling rate is 500 MSa/s and bandwidth is200 MHz,which solves the large bandwidth,high-speed signal acquisition and processing problems.At present,the data acquisition system is successfully used in broadband receiver test systems.展开更多
This study reveals the successful design of the data acquisition system for pH sensors.The data acquisition system includes an instrumentation amplifier,a low pass filter and a calculation program.The instrumentation ...This study reveals the successful design of the data acquisition system for pH sensors.The data acquisition system includes an instrumentation amplifier,a low pass filter and a calculation program.The instrumentation amplifier used as the readout circuit has many advantages,including high input impedance,high gain,low output impedance,high CMRR and high bandwidth.The low pass filter is employed to cancel the circuit noise.The calculation program uses the two-point calibration method to calculate the sample concentration.Furthermore,this study employs Boolean function to cancel error signals.As indicated by experimental results,the readout circuit obtains the sensing signal and the calculation program calculates the pH value.Hence,this study successfully fabricates an effective data acquisition system for pH sensors.展开更多
Neutral beam injection is one of the effective auxiliary heating methods in magnetic-confinementfusion experiments. In order to acquire the suppressor-grid current signal and avoid the grid being damaged by overheatin...Neutral beam injection is one of the effective auxiliary heating methods in magnetic-confinementfusion experiments. In order to acquire the suppressor-grid current signal and avoid the grid being damaged by overheating, a data acquisition and over-current protection system based on the PXI(PCI e Xtensions for Instrumentation) platform has been developed. The system consists of a current sensor, data acquisition module and over-current protection module. In the data acquisition module,the acquired data of one shot will be transferred in isolation and saved in a data-storage server in a txt file. It can also be recalled using NBWave for future analysis. The over-current protection module contains two modes: remote and local. This gives it the function of setting a threshold voltage remotely and locally, and the forbidden time of over-current protection also can be set by a host PC in remote mode. Experimental results demonstrate that the data acquisition and overcurrent protection system has the advantages of setting forbidden time and isolation transmission.展开更多
This work contributed to a detailed study on a better understanding of the Jominy test, adopted a proportion of study to create the Jominy test device, exhibited favorable conceptions for the development of a prototyp...This work contributed to a detailed study on a better understanding of the Jominy test, adopted a proportion of study to create the Jominy test device, exhibited favorable conceptions for the development of a prototype of the device, covering the four aspects of the project, being they: test device, test body heating system, test automation and instrumentation using embedded electronics and financial analysis for the elaboration of this project in Brazil. It was possible to observe in the results that the system is efficient, simple and functional, it was possible to obtain the first test carried out in the controlled environment the temperature data in degrees centigrade, the recorded data were automatically launched in Microsoft Excel by the PLX DAQ software, making the acquisition of the data. In the matter of preparing the test device, the drawings are presented in the 3D modeling software, cost tables of the materials used for assembly in Brazil. In terms of the heating system, a heating system was adopted that uses electromagnetic induction, the cost of materials related to the heating system design was also presented. Another relevant factor that contributes to the research and improvement of the prototype is the municipality, located in the Paraiba Valley region, located in the state of <span style="white-space:nowrap;">São </span>Paulo, consisting of a fertile and relevant scenario of regional, national, international and multinational statistics, thus concluding the effectiveness for the mainly metallurgical industries. The results obtained were satisfactory and consistent, when they were created for the Jominy test device with the ability to submit small pieces for testing and mainly essential in the didactic point of view for a higher education institution of engineering and technology.展开更多
The power communication network is a separate network from the power grid whose primary purpose is to ensure the power grid's safe operation.This paper expounds the composition of the comprehensive network managem...The power communication network is a separate network from the power grid whose primary purpose is to ensure the power grid's safe operation.This paper expounds the composition of the comprehensive network management architecture of the power communication data network and the implementation of the data acquisition module in the network management system through theoretical analysis,for the reference of relevant personnel,in order to better promote the collection of power grid communication network data.展开更多
Android smartphones largely dominate the smartphone market. For this reason, it is very important to examine these smartphones in terms of digital forensics since they are often used as evidence in trials. It is possi...Android smartphones largely dominate the smartphone market. For this reason, it is very important to examine these smartphones in terms of digital forensics since they are often used as evidence in trials. It is possible to acquire a physical or logical image of these devices. Acquiring physical and logical images has advantages and disadvantages compared to each other. Creating the logical image is done at the file system level. Analysis can be made on this logical image. Both logical image acquisition and analysis of the image can be done by software tools. In this study, the differences between logical image and physical image acquisition in Android smartphones, their advantages and disadvantages compared to each other, the difficulties that may be encountered in obtaining physical images, which type of image contributes to obtaining more useful and effective data, which one should be preferred for different conditions, and the benefits of having root authority are discussed. The practice of getting the logical image of the Android smartphones and making an analysis on the image is also included. Although root privileges are not required for logical image acquisition, it has been observed that very limited data will be obtained with the logical image created without root privileges. Nevertheless, logical image acquisition has advantages too against physical image acquisition.展开更多
In this paper, a hybrid neural-genetic fuzzy system is proposed to control the flow and height of water in the reservoirs of water transfer networks. These controls will avoid probable water wastes in the reservoirs a...In this paper, a hybrid neural-genetic fuzzy system is proposed to control the flow and height of water in the reservoirs of water transfer networks. These controls will avoid probable water wastes in the reservoirs and pressure drops in water distribution networks. The proposed approach combines the artificial neural network, genetic algorithm, and fuzzy inference system to improve the performance of the supervisory control and data acquisition stations through a new control philosophy for instruments and control valves in the reservoirs of the water transfer networks. First, a multi-core artificial neural network model, including a multi-layer perceptron and radial based function, is proposed to forecast the daily consumption of the water in a reservoir. A genetic algorithm is proposed to optimize the parameters of the artificial neural networks. Then, the online height of water in the reservoir and the output of artificial neural networks are used as inputs of a fuzzy inference system to estimate the flow rate of the reservoir inlet. Finally, the estimated inlet flow is translated into the input valve position using a transform control unit supported by a nonlinear autoregressive exogenous model. The proposed approach is applied in the Tehran water transfer network. The results of this study show that the usage of the proposed approach significantly reduces the deviation of the reservoir height from the desired levels.展开更多
Background The Gravitational Wave High-energy Electromagnetic Counterpart All-sky Monitor(GECAM)consists of 2 microsatellites,each of which contains 25 GRD(LaBr3)detectors and 8 CPD(plastic scintillator)detectors.Meth...Background The Gravitational Wave High-energy Electromagnetic Counterpart All-sky Monitor(GECAM)consists of 2 microsatellites,each of which contains 25 GRD(LaBr3)detectors and 8 CPD(plastic scintillator)detectors.Method silicon photomultiplier(SiPM)array is used to read each detector.The output signal of these detectors with SiPM array is very special and challenging to readout.In this study,a novel data acquisition(DAQ)algorithm for these detectors is designed and implemented,and the content of the output event packet is defined.Result and Conclusion The performances,including the event acquisition efficiency of this DAQ algorithm,are extensively verified through experimental tests.From the on-ground and in-flight tests,this algorithm has excellent performance despite the very limited resources and short development time of GECAM mission.展开更多
Background:Digital twin requires virtual reality mapping and optimization iteration between physical devices and virtual models.The mechanical movement data collection of physical equipment is essential for the implem...Background:Digital twin requires virtual reality mapping and optimization iteration between physical devices and virtual models.The mechanical movement data collection of physical equipment is essential for the implementation of accurate virtual and physical synchronization in a digital twin environment.However,the traditional approach relying on PLC(programmable logic control)fails to collect various mechanical motion state data.Additionally,few investigations have used machine visions for the virtual and physical synchronization of equipment.Thus,this paper presents a mechanical movement data acquisition method based on multilayer neural networks and machine vision.Methods:Firstly,various visual marks with different colors and shapes are designed for marking physical devices.Secondly,a recognition method based on the Hough transform and histogram feature is proposed to realize the recognition of shape and color features respectively.Then,the multilayer neural network model is introduced in the visual mark location.The neural network is trained by the dropout algorithm to realize the tracking and location of the visual mark.To test the proposed method,1000 samples were selected.Results:The experiment results shows that when the size of the visual mark is larger than 6mm,the recognition success rate of the recognition algorithm can reach more than 95%.In the actual operation environment with multiple cameras,the identification points can be located more accurately.Moreover,the camera calibration process of binocular and multi-eye vision can be simplified by the multilayer neural networks.Conclusions:This study proposes an effective method in the collection of mechanical motion data of physical equipment in a digital twin environment. Further studies are needed to perceive posture and shape data of physical entities under the multi-camera redundant shooting.展开更多
The emergence of power dispatching automation systems has greatly improved the efficiency of power industry operations and promoted the rapid development of the power industry.However,with the convergence and increase...The emergence of power dispatching automation systems has greatly improved the efficiency of power industry operations and promoted the rapid development of the power industry.However,with the convergence and increase in power data flow,the data dispatching network and the main station dispatching automation system have encountered substantial pressure.Therefore,themethod of online data resolution and rapid problemidentification of dispatching automation systems has been widely investigated.In this paper,we performa comprehensive review of automated dispatching of massive dispatching data from the perspective of intelligent identification,discuss unresolved research issues and outline future directions in this area.In particular,we divide intelligent identification over power big data into data acquisition and storage processes,anomaly detection and fault discrimination processes,and fault tracing for dispatching operations during communication.A detailed survey of the solutions to the challenges in intelligent identification over power big data is then presented.Moreover,opportunities and future directions are outlined.展开更多
A trigger system is typically employed in active seismic testing to trigger and synchronize multichannel surface wave data acquisition.The effect of the trigger system on the dispersion image of surface waves is empir...A trigger system is typically employed in active seismic testing to trigger and synchronize multichannel surface wave data acquisition.The effect of the trigger system on the dispersion image of surface waves is empirically known to be negligible,however,theoretical explanation regarding the effect of the trigger system is insufficient.This study systematically examines the theory for surface wave dispersion analysis and proves that the effect of the trigger system on a dispersion image is negligible via a solid theoretical explanation.Subsequently,based on the new theoretical explanation,an alternative method that uses only the relative phase difference between sensors to extract dispersion characteristics with better conceptual clarity is proposed.Two active surface wave testing cases are considered to validate the theory and method.The results indicate that(1)an accurate trigger system is not necessary for surface wave data acquisition,and(2)it is unnecessary to assume that the impact point is the generation point of the surface waves for the experimental dispersion analysis.展开更多
The 3D digitalization and documentation of ancient Chinese architecture is challenging because of architectural complexity and structural delicacy.To generate complete and detailed models of this architecture,it is be...The 3D digitalization and documentation of ancient Chinese architecture is challenging because of architectural complexity and structural delicacy.To generate complete and detailed models of this architecture,it is better to acquire,process,and fuse multi-source data instead of single-source data.In this paper,we describe our work on 3D digital preservation of ancient Chinese architecture based on multi source data.We first briefly introduce two surveyed ancient Chinese temples,Foguang Temple and Nanchan Temple.Then,we report the data acquisition equipment we used and the multi-source data we acquired.Finally,we provide an overview of several applications we conducted based on the acquired data,including ground and aerial image fusion,image and LiDAR(light detection and ranging)data fusion,and architectural scene surface reconstruction and semantic modeling.We believe that it is necessary to involve multi-source data for the 3D digital preservation of ancient Chinese architecture,and that the work in this paper will serve as a heuristic guideline for the related research communities.展开更多
Our paper describes the organizing of database,remarks about SNGO(Surlari National Geomagnetic Observatory)and network infrastructure.Based on the geomagnetic data acquired and stored on the database server,we perform...Our paper describes the organizing of database,remarks about SNGO(Surlari National Geomagnetic Observatory)and network infrastructure.Based on the geomagnetic data acquired and stored on the database server,we perform the processing and analysis of geomagnetic parameters through different spectral,statistical and correlation methods.All these parameters are included in the geomagnetic database on server.The web interface for the database meets the different needs of handling the data collected,raw or processed.The server-side programming language used for design is php.This allow us to select different periods for which access to stored data,required for different search filters and different parameters or data from different time periods can be compared.For a more in-depth analysis of the stored data,through JavaScript programming language graphs for different parameters can be drawn.Access to the web interface can be done with or without authentication,depending on the need to ensure the security of certain data collected,stored and processed.The applications are scalable for different devices that will access it:mobile,tablets,laptops or desktops.展开更多
This paper proposes to adopt SCADA and PLC technology for the improvement of the performance of real time signaling&train control systems in metro railways.The main concern of this paper is to minimize the failure...This paper proposes to adopt SCADA and PLC technology for the improvement of the performance of real time signaling&train control systems in metro railways.The main concern of this paper is to minimize the failure in automated metro railways system operator and integrate the information coming from Operational Control Centre(OCC),traction SCADA system,traction power control,and power supply system.This work presents a simulated prototype of an automated metro train system operator that uses PLC and SCADA for the real time monitoring and control of the metro railway systems.Here,SCADA is used for the visualization of an automated process operation and then the whole opera-tion is regulated with the help of PLC.The PLC used in this process is OMRON(NX1P2-9024DT1)and OMRON’s Sysmac studio programming software is used for developing the ladder logic of PLC.The metro railways system has deployed infrastructure based on SCADA from the power supply system,and each station’s traction power control is connected to the OCC remotely which commands all of the stations and has the highest command priority.An alarm is triggered in the event of an emergency or system congestion.This proposed system overcomes the drawbacks of the current centralized automatic train control(CATC)system.This system provides prominent benefits like augmenting services which may enhance a network’s full load capacity and networkflexibility,which help in easy modification in the existing program at any time.展开更多
A remote monitoring system for a secondary heating pipe network is designed on the basis of the KingSCADA software.Remote data communication is implemented through the IP mapping technology.Remote data are sorted thro...A remote monitoring system for a secondary heating pipe network is designed on the basis of the KingSCADA software.Remote data communication is implemented through the IP mapping technology.Remote data are sorted through IOServer,and the remote monitoring of the pipe network unit port return is implemented accordingly.Using data such as water temperature and pressure of the water supply and return pipes,valve opening can be remotely adjusted to optimize the performances of the network to meet user needs in real time.The research results show that this remote monitoring system displays a reasonable degree of stability and efficiency in remote communication.展开更多
基金supported by the National Natural Science Foundation of China (Nos.12027809,U1967201,11875073,11875074 and 11961141003)National Key R&D Program of China (No.2018YFA0404403)the State Key Laboratory of Nuclear Physics and Technology,Peking University (Nos.NPT2019ZZ02,NPT2020KFY17).
文摘A control and data acquisition system was implemented for the recently developed collinear laser spectroscopy setup.This system is dedicated to data recording,storage,processing,monitoring of the beam intensity and energy,and visualization of various spectra.In comparison to the conventional resonance nuclear reaction system,the key technique is the precise synchronization of the detected counts with the actual scanning voltage(or probing laser frequency).The functions of the system were tested by measuring the hyperfine structure spectra of stable calcium(e.g.,^(40)Ca^(+))and radioactive potassium(e.g.,^(38)K)in the bunched and continuous modes,respectively.This system will be routinely applied and further improved in subsequent laser spectroscopy experiments on unstable isotopes at the Beijing Radioactive Ion-beam Facility(BRIF).
基金supported by Key Scientific Research Project of Henan Province(17A580003)Key Scientific and Technological Project of Henan Province(172102210022)Henan Polytechnic University Education Teaching Reform Research Projects(2015JG034)
文摘With the continuous development and expansion of automotive industry,car safety problems are widely concerned by most of us. In order to make it easier to adjust car' s real-time body posture,it is necessary to design a real-time data acquisition system,thus reducing the number of casualties in normal driving. A brief account of the development status of data acquisition system at home and abroad,and the concept,principle,function of virtual instrument platform are given. The advantages and disadvantages of the data acquisition system,based on LabVIEW in different methods of data acquisition,are analyzed and compared,and put forward some improvements and optimization,so the real-time data acquisition system can meet the requirement of adjusting the state of the vehicle,improving real-time of data acquisition and processing. Finally,it indicates the development direction and prospect of data acquisition system based on LabVIEW.
文摘A data acquisition system for testing gas sensor array response to multi-gas is presented.The testing system is based on the character of the gas response of metal oxide semiconductor gas sensor array.The data acquisition is realized automatically through the real time controlling of the data acquisition card PCI1711.This system is highly attractive for electronic nose,which is a powerful tool for the discrimination of gases.
基金supported by the National Key R&D Program of China(No.2018YFA0404403)the National Natural Science Foundation of China(Nos.12035001,12075006,11675003)the State Key Laboratory of Nuclear Physics and Technology,PKU(No.NPT2020KFY18)。
文摘A newly developed digital data acquisition system,which is based on the digital pulse processor Pixie-16 modules by XIA LLC,was tested with the c-ray detector array of the China Institute of Atomic Energy using the cray source and in-beam c-rays.A comparison between this digital data acquisition system and the conventional analog data acquisition system was made.At a low count rate,both systems exhibit good and comparable energy resolutions.At a high count rate above 8.8 k/s,while the energy resolution obtained by the analog system deteriorates significantly,the energy resolution obtained by the digital system is nearly unchanged.Meanwhile,experimental data with higher statistics can be collected by the digital system.The advantage of this digital system over the conventional analog system can be ascribed to its excellent capability of handling pile-up pulses at higher count rates,and the fact that it has nearly no dead time in data transmission and conversion.
文摘To satisfy high-precision,widc-rangc,and real-time neutron flux measurement requirements by the International Thermonuclear Experimental Reactor(ITF.R),a data acquisition and control system based on fission chamber detectors and fast controller technology,has been developed for neutron flux monitor in ITER Equatorial Port#7.The signal processing units which arc based on a field programmable gate array and the PXI Express platform arc designed to realize the neutron flux measurement with I ms time resolution and a fast response less than 0.2 ms,together with real-time timestamps provided by a timing hoard.The application of the wide-range algorithm allows the system to measure up to 10^10cps with a relative error of less than 5%.Furthermore,the system is managed and controlled by a software based on the Experimental Physics and Industrial Control System,compliant with COntrol.Data Access and Communication architecture.
文摘A field-programmable gate array(FPGA)based high-speed broadband data acquisition system is designed.The system has a dual channel simultaneous acquisition function.The maximum sampling rate is 500 MSa/s and bandwidth is200 MHz,which solves the large bandwidth,high-speed signal acquisition and processing problems.At present,the data acquisition system is successfully used in broadband receiver test systems.
文摘This study reveals the successful design of the data acquisition system for pH sensors.The data acquisition system includes an instrumentation amplifier,a low pass filter and a calculation program.The instrumentation amplifier used as the readout circuit has many advantages,including high input impedance,high gain,low output impedance,high CMRR and high bandwidth.The low pass filter is employed to cancel the circuit noise.The calculation program uses the two-point calibration method to calculate the sample concentration.Furthermore,this study employs Boolean function to cancel error signals.As indicated by experimental results,the readout circuit obtains the sensing signal and the calculation program calculates the pH value.Hence,this study successfully fabricates an effective data acquisition system for pH sensors.
基金supported by National Natural Science Foundation of China(No.11575240)Key Program of Research and Development of Hefei Science Center,CAS(grant 2016HSC-KPRD002)
文摘Neutral beam injection is one of the effective auxiliary heating methods in magnetic-confinementfusion experiments. In order to acquire the suppressor-grid current signal and avoid the grid being damaged by overheating, a data acquisition and over-current protection system based on the PXI(PCI e Xtensions for Instrumentation) platform has been developed. The system consists of a current sensor, data acquisition module and over-current protection module. In the data acquisition module,the acquired data of one shot will be transferred in isolation and saved in a data-storage server in a txt file. It can also be recalled using NBWave for future analysis. The over-current protection module contains two modes: remote and local. This gives it the function of setting a threshold voltage remotely and locally, and the forbidden time of over-current protection also can be set by a host PC in remote mode. Experimental results demonstrate that the data acquisition and overcurrent protection system has the advantages of setting forbidden time and isolation transmission.
文摘This work contributed to a detailed study on a better understanding of the Jominy test, adopted a proportion of study to create the Jominy test device, exhibited favorable conceptions for the development of a prototype of the device, covering the four aspects of the project, being they: test device, test body heating system, test automation and instrumentation using embedded electronics and financial analysis for the elaboration of this project in Brazil. It was possible to observe in the results that the system is efficient, simple and functional, it was possible to obtain the first test carried out in the controlled environment the temperature data in degrees centigrade, the recorded data were automatically launched in Microsoft Excel by the PLX DAQ software, making the acquisition of the data. In the matter of preparing the test device, the drawings are presented in the 3D modeling software, cost tables of the materials used for assembly in Brazil. In terms of the heating system, a heating system was adopted that uses electromagnetic induction, the cost of materials related to the heating system design was also presented. Another relevant factor that contributes to the research and improvement of the prototype is the municipality, located in the Paraiba Valley region, located in the state of <span style="white-space:nowrap;">São </span>Paulo, consisting of a fertile and relevant scenario of regional, national, international and multinational statistics, thus concluding the effectiveness for the mainly metallurgical industries. The results obtained were satisfactory and consistent, when they were created for the Jominy test device with the ability to submit small pieces for testing and mainly essential in the didactic point of view for a higher education institution of engineering and technology.
文摘The power communication network is a separate network from the power grid whose primary purpose is to ensure the power grid's safe operation.This paper expounds the composition of the comprehensive network management architecture of the power communication data network and the implementation of the data acquisition module in the network management system through theoretical analysis,for the reference of relevant personnel,in order to better promote the collection of power grid communication network data.
文摘Android smartphones largely dominate the smartphone market. For this reason, it is very important to examine these smartphones in terms of digital forensics since they are often used as evidence in trials. It is possible to acquire a physical or logical image of these devices. Acquiring physical and logical images has advantages and disadvantages compared to each other. Creating the logical image is done at the file system level. Analysis can be made on this logical image. Both logical image acquisition and analysis of the image can be done by software tools. In this study, the differences between logical image and physical image acquisition in Android smartphones, their advantages and disadvantages compared to each other, the difficulties that may be encountered in obtaining physical images, which type of image contributes to obtaining more useful and effective data, which one should be preferred for different conditions, and the benefits of having root authority are discussed. The practice of getting the logical image of the Android smartphones and making an analysis on the image is also included. Although root privileges are not required for logical image acquisition, it has been observed that very limited data will be obtained with the logical image created without root privileges. Nevertheless, logical image acquisition has advantages too against physical image acquisition.
文摘In this paper, a hybrid neural-genetic fuzzy system is proposed to control the flow and height of water in the reservoirs of water transfer networks. These controls will avoid probable water wastes in the reservoirs and pressure drops in water distribution networks. The proposed approach combines the artificial neural network, genetic algorithm, and fuzzy inference system to improve the performance of the supervisory control and data acquisition stations through a new control philosophy for instruments and control valves in the reservoirs of the water transfer networks. First, a multi-core artificial neural network model, including a multi-layer perceptron and radial based function, is proposed to forecast the daily consumption of the water in a reservoir. A genetic algorithm is proposed to optimize the parameters of the artificial neural networks. Then, the online height of water in the reservoir and the output of artificial neural networks are used as inputs of a fuzzy inference system to estimate the flow rate of the reservoir inlet. Finally, the estimated inlet flow is translated into the input valve position using a transform control unit supported by a nonlinear autoregressive exogenous model. The proposed approach is applied in the Tehran water transfer network. The results of this study show that the usage of the proposed approach significantly reduces the deviation of the reservoir height from the desired levels.
基金The authors would like to thank all colleagues for helpful suggestions and comments.This study was supported by the National Natural Science Foundation of China(Grant No.11803039 and 12173038)the Strategic Priority Research Program on Space Science,the Chinese Academy of Sciences(Grant No.XDA 15360100 and XDA 15360102).
文摘Background The Gravitational Wave High-energy Electromagnetic Counterpart All-sky Monitor(GECAM)consists of 2 microsatellites,each of which contains 25 GRD(LaBr3)detectors and 8 CPD(plastic scintillator)detectors.Method silicon photomultiplier(SiPM)array is used to read each detector.The output signal of these detectors with SiPM array is very special and challenging to readout.In this study,a novel data acquisition(DAQ)algorithm for these detectors is designed and implemented,and the content of the output event packet is defined.Result and Conclusion The performances,including the event acquisition efficiency of this DAQ algorithm,are extensively verified through experimental tests.From the on-ground and in-flight tests,this algorithm has excellent performance despite the very limited resources and short development time of GECAM mission.
基金This work was supported by the National Natural Science Foundation of China(grant nos.51775517 and 51905493)the Henan Provincial Science and Technology Research Project(nos.212102210074,202102210070,and 202102210396).
文摘Background:Digital twin requires virtual reality mapping and optimization iteration between physical devices and virtual models.The mechanical movement data collection of physical equipment is essential for the implementation of accurate virtual and physical synchronization in a digital twin environment.However,the traditional approach relying on PLC(programmable logic control)fails to collect various mechanical motion state data.Additionally,few investigations have used machine visions for the virtual and physical synchronization of equipment.Thus,this paper presents a mechanical movement data acquisition method based on multilayer neural networks and machine vision.Methods:Firstly,various visual marks with different colors and shapes are designed for marking physical devices.Secondly,a recognition method based on the Hough transform and histogram feature is proposed to realize the recognition of shape and color features respectively.Then,the multilayer neural network model is introduced in the visual mark location.The neural network is trained by the dropout algorithm to realize the tracking and location of the visual mark.To test the proposed method,1000 samples were selected.Results:The experiment results shows that when the size of the visual mark is larger than 6mm,the recognition success rate of the recognition algorithm can reach more than 95%.In the actual operation environment with multiple cameras,the identification points can be located more accurately.Moreover,the camera calibration process of binocular and multi-eye vision can be simplified by the multilayer neural networks.Conclusions:This study proposes an effective method in the collection of mechanical motion data of physical equipment in a digital twin environment. Further studies are needed to perceive posture and shape data of physical entities under the multi-camera redundant shooting.
文摘The emergence of power dispatching automation systems has greatly improved the efficiency of power industry operations and promoted the rapid development of the power industry.However,with the convergence and increase in power data flow,the data dispatching network and the main station dispatching automation system have encountered substantial pressure.Therefore,themethod of online data resolution and rapid problemidentification of dispatching automation systems has been widely investigated.In this paper,we performa comprehensive review of automated dispatching of massive dispatching data from the perspective of intelligent identification,discuss unresolved research issues and outline future directions in this area.In particular,we divide intelligent identification over power big data into data acquisition and storage processes,anomaly detection and fault discrimination processes,and fault tracing for dispatching operations during communication.A detailed survey of the solutions to the challenges in intelligent identification over power big data is then presented.Moreover,opportunities and future directions are outlined.
基金Natural Science Foundation of Hubei Province of China for Distinguished Young Scholars (2023AFA099)Natural Science Foundation of Hubei Province of China for Key Projects (Innovation Group) (2023AFA030)National Natural Science Foundation of China (52178471)。
文摘A trigger system is typically employed in active seismic testing to trigger and synchronize multichannel surface wave data acquisition.The effect of the trigger system on the dispersion image of surface waves is empirically known to be negligible,however,theoretical explanation regarding the effect of the trigger system is insufficient.This study systematically examines the theory for surface wave dispersion analysis and proves that the effect of the trigger system on a dispersion image is negligible via a solid theoretical explanation.Subsequently,based on the new theoretical explanation,an alternative method that uses only the relative phase difference between sensors to extract dispersion characteristics with better conceptual clarity is proposed.Two active surface wave testing cases are considered to validate the theory and method.The results indicate that(1)an accurate trigger system is not necessary for surface wave data acquisition,and(2)it is unnecessary to assume that the impact point is the generation point of the surface waves for the experimental dispersion analysis.
文摘The 3D digitalization and documentation of ancient Chinese architecture is challenging because of architectural complexity and structural delicacy.To generate complete and detailed models of this architecture,it is better to acquire,process,and fuse multi-source data instead of single-source data.In this paper,we describe our work on 3D digital preservation of ancient Chinese architecture based on multi source data.We first briefly introduce two surveyed ancient Chinese temples,Foguang Temple and Nanchan Temple.Then,we report the data acquisition equipment we used and the multi-source data we acquired.Finally,we provide an overview of several applications we conducted based on the acquired data,including ground and aerial image fusion,image and LiDAR(light detection and ranging)data fusion,and architectural scene surface reconstruction and semantic modeling.We believe that it is necessary to involve multi-source data for the 3D digital preservation of ancient Chinese architecture,and that the work in this paper will serve as a heuristic guideline for the related research communities.
基金the Romanian Ministry of Education and Research for financing the projects:“The realization of 3D geological/geophysical models for the characterization of some areas of economic and scientific interest in Romania”,with Contract No.49N/2019“Institutional capacities and services for research,monitoring and forecasting of risks in extra-atmospheric space”,acronym SAFESPACE,Contract No.16PCCDI/2018,within PNCDIII.
文摘Our paper describes the organizing of database,remarks about SNGO(Surlari National Geomagnetic Observatory)and network infrastructure.Based on the geomagnetic data acquired and stored on the database server,we perform the processing and analysis of geomagnetic parameters through different spectral,statistical and correlation methods.All these parameters are included in the geomagnetic database on server.The web interface for the database meets the different needs of handling the data collected,raw or processed.The server-side programming language used for design is php.This allow us to select different periods for which access to stored data,required for different search filters and different parameters or data from different time periods can be compared.For a more in-depth analysis of the stored data,through JavaScript programming language graphs for different parameters can be drawn.Access to the web interface can be done with or without authentication,depending on the need to ensure the security of certain data collected,stored and processed.The applications are scalable for different devices that will access it:mobile,tablets,laptops or desktops.
文摘This paper proposes to adopt SCADA and PLC technology for the improvement of the performance of real time signaling&train control systems in metro railways.The main concern of this paper is to minimize the failure in automated metro railways system operator and integrate the information coming from Operational Control Centre(OCC),traction SCADA system,traction power control,and power supply system.This work presents a simulated prototype of an automated metro train system operator that uses PLC and SCADA for the real time monitoring and control of the metro railway systems.Here,SCADA is used for the visualization of an automated process operation and then the whole opera-tion is regulated with the help of PLC.The PLC used in this process is OMRON(NX1P2-9024DT1)and OMRON’s Sysmac studio programming software is used for developing the ladder logic of PLC.The metro railways system has deployed infrastructure based on SCADA from the power supply system,and each station’s traction power control is connected to the OCC remotely which commands all of the stations and has the highest command priority.An alarm is triggered in the event of an emergency or system congestion.This proposed system overcomes the drawbacks of the current centralized automatic train control(CATC)system.This system provides prominent benefits like augmenting services which may enhance a network’s full load capacity and networkflexibility,which help in easy modification in the existing program at any time.
基金This work was supported by the Hebei Province Innovation Capability Enhancement Project(19244503D)the Hebei Province Key R&D Program Project(20374504D)the Hebei Province Higher Education Science and Technology Research and Development Project(ZD2020332).
文摘A remote monitoring system for a secondary heating pipe network is designed on the basis of the KingSCADA software.Remote data communication is implemented through the IP mapping technology.Remote data are sorted through IOServer,and the remote monitoring of the pipe network unit port return is implemented accordingly.Using data such as water temperature and pressure of the water supply and return pipes,valve opening can be remotely adjusted to optimize the performances of the network to meet user needs in real time.The research results show that this remote monitoring system displays a reasonable degree of stability and efficiency in remote communication.