Analysis of the critical active species for methylene blue decoloration in a dielectric barrier discharge plasma system

In the paper, a hybrid gas–liquid dielectric barrier discharge(DBD) plasma system was set up to treat a methylene blue(MB) solution. The effects of the change of the carrier gas, the gas bubbling rate and different kinds of scavenger addition, including sodium carbonate(Na_2CO_3),para benzoquinone(p-BQ), triethylenediamine and sodium dihydrogen phosphate(NaH_2PO_4),on the MB decoloration were reviewed to clarify the critical active species for the dye decoloration in the DBD plasma system. The obtained results show that higher decoloration of the MB solution could be achieved when O2 was used as the carrier gas, which could be 100% after 20 min discharge treatment, and the result confirmed the crucial effect of O_3 in the MB decoloration. Based on the experiments of the scavenger addition, it could be concluded that O_2·^- and ~1O_2 were two other important reactive oxygen species(ROS) for the MB decoloration.The results of the higher chemical oxygen demand removal and faster disappearance of the characteristic peak of the MB from the UV–vis analysis under O_2 bubbling conditions also proved the critical effect of the ROS formed by O_2 on the MB decoloration.

Electrochemical and Photoelectrochemical Decoloration of Amaranth Dye Azo Using Composited Dimensional Stable Anodes

In this paper we report the results of our experimental work conducted to decoloration of a well-known highly toxic Amaranth dye by electrochemical and photoelectrochemical methods. Throughout this investigation were used two different Dimensional Stable Anode (DSA) electrodes, namely, IrO2-Ru2O-SnO2-TiO2/Ti and Ru2O-SnO2-TiO2/Ti. The experimental results show that IrO2-Ru2O-SnO2-TiO2/Ti electrode has higher performance on amaranth decoloration than Ru2O-SnO2-TiO2/Ti electrode, but with the disadvantage of higher energy consumption. For higher degradation of Amaranth dye with both DSA electrodes, the process was carried out via photoelectrochemical method. Our experimental results clearly shown the decrease in absorbance of all UV-Vis peaks due to the mineralization of the azo dye;also, it was noteworthy photoelectrochemical process consumes less energy under the same experimental conditions than electrochemical process. The IrO2-Ru2O-SnO2-TiO2/Ti electrode reaches a higher degradation degree of Amaranth solutions than Ru2O-SnO2-TiO2/Ti electrode using a photoelectrochemical technique.

Optimization of Protein Extraction and Decoloration Conditions for Tea Residues

To optimize alkaline method for extracting proteins from tea residue(TR), the effect of extraction conditions on tea protein extraction rate(TPER) was investigated. Single factor experiment showed the extraction temperature 80 °C, extraction time 100 min, p H value 13 and liquid–solid ratio 40:1 as the optimal extraction conditions. The orthogonal test revealed that the maximum TPER reached 29.71% under the following optimal combination of conditions: extraction temperature 70 °C, extraction time 60 min, p H 12 and liquid–solid ratio 50:1. For optimizing the purification of tea residue proteins, isoelectric point precipitation(p I), ammonium sulfate precipitation(a S) and isoelectric point plus ammonium sulfate precipitation(i PAS) were compared. The result showed that the highest protein precipitation rate(PPR) was 89.70% which was generated by using i PAS. Furthermore, powdered activated carbon was chosen as the most suitable decolorant for the extracted proteins.

Characteristics of gas-liquid pulsed discharge plasma reactor and dye decoloration efficiency

The pulsed high-voltage discharge is a new advanced oxidation technology for water treatment. Methyl Orange （MO） dye wastewater was chosen as the target object. Some investigations were conducted on MO decoloration including the discharge characteristics of the multi-needle reactor, parameter optimization, and the degradation mechanism. The following results were obtained. The color group of the azo dye MO was effectively decomposed by water surface plasma. The decoloration rate was promoted with the increase of treatment time, peak voltage, and pulse frequency. When the initial conductivity was 1700 μS/cm, the decoloration rate was the highest. The optimum distance between the needle electrodes and the water surface was 1 mm, the distance between the grounding electrode and the water surface was 28 mm, and the number of needle electrodes and spacing between needles were 24 and 7.5 mm, respectively. The decoloration rate of MO was affected by the gas in the reactor and varied in the order oxygen 〉 air〉 argon 〉 nitrogen, and the energy yield obtained in this investigation was 0.45 g/kWh.

Facile synthesis of composite polyferric magnesium-silicate-sulfate coagulant with enhanced performance in water and wastewater

The coagulation process is a widely applied technology in water and wastewater treatment.Novel composite polyferric mag-nesium-silicate-sulfate(PFMS)coagulants were synthesized using Na_(2)SiO_(3)·9H_(2)O,Fe_(2)(SO_(4))_(3),and MgSO_(4) as raw materials in this paper.The effects of aging time,Fe:Si:Mg,and OH:M molar ratios(M represents the metal ions)on the coagulation performance of the as-pre-pared PFMS were systematically investigated to obtain optimum coagulants.The results showed that PFMS coagulant exhibited good co-agulation properties in the treatment of simulated humic acid-kaolin surface water and reactive dye wastewater.When the molar ratio was controlled at Fe:Si:Mg=2:2:1 and OH:M=0.32,the obtained PFMS presented excellent stability and a high coagulation efficiency.The removal efficiency of ultraviolet UV254 was 99.81%,and the residual turbidity of the surface water reached 0.56 NTU at a dosage of 30 mg·L^(-1).After standing the coagulant for 120 d in the laboratory,the removal efficiency of UV254 and residual turbidity of the surface wa-ter were 88.12%and 0.68 NTU,respectively,which accord with the surface water treatment requirements.In addition,the coagulation performance in the treatment of reactive dye wastewater was greatly improved by combining the advantages of magnesium and iron salts.Compared with polyferric silicate-sulfate(PFS)and polymagnesium silicate-sulfate(PMS),the PFMS coagulant played a better decolor-ization role within the pH range of 7-13.

Treatment of Dye Wastewater by Using a Hybrid Gas/Liquid Pulsed Discharge Plasma Reactor

A hybrid gas/liquid pulsed discharge plasma reactor using a porous ceramic tube is proposed for dye wastewater treatment. High voltage pulsed discharge plasma was generated in the gas phase and simultaneously the plasma channel was permeated through the tiny holes of the ceramic tube into the water phase accompanied by gas bubbles. The porous ceramic tube not only separated the gas phase and liquid phase but also offered an effective plasma spreading channel. The effects of the peak pulse voltage, additive gas varieties, gas bubbling rate, solution conductivity and TiO2 addition were investigated. The results showed that this reactor was effective for dye wastewater treatment. The decoloration efficiency of Acid Orange II was enhanced with an increase in the power supplied. Under the studied conditions, 97% of Acid Orange II in aqueous solution was effectively decolored with additive oxygen gas, which was 51% higher than that with argon gas, and the increasing 02 bubbling rate also benefited the decoloration of dye wastewater. Water conductivity had a small effect on the level of decoloration. Catalysis of TiO2 could be induced by the pulsed discharge plasma and addition of TiO2 aided the decoloration of Acid Orange II.

Research on the Graft Copolymerization of EH-lignin with acrylamide

Lignin isolated from enzymatic hydrolyzed corn-stalks (EH-lignin) is a renewable natural polymer noted for its versatility and applicability in a vari-ety of uses. Graft copolymerization of EH-lignin with acrylamide (AM) and the application of this copolymer as a flocculant in dye wastewater treatment were studied in this article. The influ-ences of some factors on yield of copolymer and the grafting ratio were investigated and the structure of EH-lignin/AM graft copolymer was characterized by FT-IR. According to the yield and the grafting ratio, the optimum conditions for graft copolymerization were as follows: initiator K2S2O8-Na2S2O3 with a quantity 3 wt% of EH-lignin, mass ratio of AM to EH-lignin was 2~3, reaction time 4h and temperature at 50℃. It was found that the absorption capacity of graft copolymer to two azo-dyes was enhanced with the increase of grafting ratio. Furthermore, the residue concen-tration of EH-lignin/AM graft copolymer remained in the supernatant after flocculation was much lower than that of pure EH-lignin.

Optimization of the operating conditions in a TiO_2/Fe_3O_4-SiO_2 photocatalytic reactor for the treatment of industrial wastewater containing Procion Red MX-5B

According to the design principle of the central composite experimental,the method of response surface analysis with three factors and three levels was adopted based on one factor test.A second-order quadratic equation for photocatalysis of Procion Red MX-5B was built.Response surface and contour were graphed with the decoloration rate of Procion Red MX-5B as the response value.Based on the analysis of the response surface plots and their corresponding contour plots,effects of pH value,irradiation time and catalyst loading were explored.By using this new method,the optimum decoloration condition was obtained as follows:pH value,1.3;irradiation time,49.9 min;catalyst loading,0.57 g/L.In the optimization,R-Squared and Adj R-Squared correlation coefficients for quadratic model were evaluated quite satisfactorily as 0.9310 and 0.8620,respectively.Under the optimum conditions established,the performance of 99.47% for color removal was experimentally reached.It was found that all factors considered have an important effect on the decolorization efficiency of Procion Red MX-5B.By the ANOVA analysis and model confirmation the optimal solution obtained using RSM was experimentally validated and credible with preferable instructional ability for experiments.

Decolorization of reactive dyes by laccase immobilized in alginate/gelatin blent with PEG

To achieve effective decolorization of reactive dyes,laccase immobilization was investigated.Laccase 0.2%(m/V)(Denilite IIS) was trapped in beads of alginate/gelatin blent with polyethylene glycol(PEG),and then the supporters were activated by cross-linking with glutaraldehyde.The results of repeated batch decolorization showed that gelatin and appropriate concentration of glutaraldehyde accelerated the decolorization of Reactive Red B-3BF(RRB);PEG had a positive effect on enzyme stability and led to an inc...

Influence of particle size and salinity on adsorption of basic dyes by agricultural waste: dried Seagrape (Caulerpa lentillifera)

Green macroalga Caulerpa lentillifera was found to have reasonable adsorption capacity for basic dyes, Astrazon Blue FGRL （AB）, Astrazon Red GTLN （AR）, and Astrazon Golden Yellow GL-E （AY）. The initial dye concentration was in the range of 100-1,800 mg/L. The dried algal sorbent was ground and sieved into 3 sizes： S （0.1-0.84 mm）, M （0.84-2.0 mm）, and L sizes （larger than 2.0 mm）. For all conditions examined in this work （at 25℃ in batch systems）, the adsorption reached equilibrium within the first hour. The kinetic data corresponded well with the pseudo second order kinetic model where the rate constant, k2, decreased as the sorbent size increased for all dyes. The adsorption isotherms followed both Langmuir and Freundlich models. Among three sorbent sizes, S size gave the highest adsorption capacity followed by M and L sizes. A reduction of sorbent size increased the specific surface area for mass transfer, and also increased the total pore volume, thus providing more active sites for adsorption. The adsorption of AB was adversely influenced by the protonation of algal surface at low pH. On the other hand, the adsorption of AR and AY could be due to weak electrostatic interaction, which was not significantly affected by pH. Increasing salinity of the system caused a decrease in adsorption capacity possibly due to the competition between Na^＋ and the dye cations for the binding sites on algal surface. Moreover, an increase in salinity generated a compressed electrical double layer on the algal surface which exerted repulsive force, retarding the adsorption of positive charged molecules such as the basic dyes.

Isolation and characterization of Pseudomonas otitidis WL-13 and its capacity to decolorize triphenylmethane dyes

Pseudomonas otitidis WL-13, which has a high capacity to decolorize triphenylmethane dyes, was isolated from activated sludge obtained from a wastewater treatment plant of a dyeing industry. This strain exhibited a remarkable color-removal capability when tested against several triphenylmethane dyes under both shaking and static conditions at high concentrations of dyes. More than 95% of Malachite Green and Brilliant Green was removed within 12 h at 500 μmol/L dye concentration under shaking conditions. Crystal Violet lost about 13% of its color under the same conditions tested. The rate of decolorization increased when the M9 medium was supplemented with yeast extract. The optimum pH and temperature for color removal were 7-9 and 35-40℃, respectively. The observed changes in the visible spectra and the inspection of bacterial growth indicated the color-removal by the adsorption of dye to the cells during incubation with strains.

Production of laccase by Coriolus versicolor and its application in decolorization of dyestuffs: (Ⅱ) Decolorization of dyes by laccase containing fermentation broth with or without self-immobilized mycelia

The capability of decolorization for commercial dyes by Coriolus versicolor fermentation broth containing laccase with or without immobilized mycelium was evaluated. With cell free fermentation broth containing laccase, high decolorization ratio was achieved for acid orange 7, but not for the other dyes concerned. The immobilized mycelium was proved to be more efficient than the cell free system. All the four dyestuffs studied were found being decolourized with certain extent by immobilized mycelium. The repeated batch decolorization was carried out with satisfactory results. The experimental data showed that the continuous decolorization of wastewater from a printing and dyeing industry was possible by using the self immobilized C. Versicolor.

Biodecolorization and partial mineralization of Reactive Black 5 by a strain of Rhodopseudomonas palustris

A strain of photosynthetic bacterium, Rhodopseudomonas palustris W1, isolated from a lab-scale anaerobic moving bed biofilm reactor (MBBR) treating textile e?uent was demonstrated to decolorize Reactive Black 5 (RB5) effciently under anaerobic condition. By a series of batch tests, the suitable conditions for RB5 decolorization were obtained, namely, pH < 10, light presence, glutamine or lactate as carbon source with concentration more than 500 mg/L when lactate is selected, NH4Cl as a nitrogen source wi...

Quantitative structure-activity relationship study on the biodegradation of acid dyestuffs

Quantitative structure-biodegradability relationships （QSBRs） were established to develop predictive models and mechanistic explanations for acid dyestuffs as well as biological activities. With a total of four descriptors, molecular weight （MW）, energies of the highest occupied molecular orbital （EHOMO）, the lowest unoccupied molecular orbital （ELUMO）, and the excited state （EES）, calculated using quantum chemical semi-empirical methodology, a series of models were analyzed between the dye biodegradability and each descriptor. Results showed that EHOMO and Mw were the dominant parameters controlling the biodegradability of acid dyes. A statistically robust QSBR model was developed for all studied dyes, with the combined application of EHOMO and Mw. The calculated biodegradations fitted well with the experimental data monitored in a facultative-aerobic process, indicative of the reliable prediction and mechanistic character of the developed model.

Fenton Reagent Generated in Electrolysis Cell and Its Usage in Degradation and Decolorization of Dyes

The Electro-chemistry process to produce Fenton reagents has been described. The in situ oxidation of dyes, acid chrome and alizarin red(Fenton reagents) with electrogenerated hydroxyl radicals was investigated. The \{ I-V \} cyclic voltammograms were measured. The redox peaks of the dyes were not observed in the treated dye solutions instead of a couple of O_2/H_2O_2 redox peaks. The IR results indicate that acid chrome dye was decomposed into naphthylamine and phenol aminophenol sulfonic acid. The degradation and the decolorization of the dyes were comfirmed by the visible spectrum and the chemical analysis. The COD_ cr removing rate was close to 80%.

Efficient decolorization of dye-containing wastewater using mycelial pellets formed of marine-derived Aspergillus niger

In order to improve the efficient decolorization of dye-containing water by biosorbent and understand the biosorption mechanism, the self-immobilization mycelial pellets were prepared using a marine-derived fungus Aspergillus niger ZJUBE-1, and an azo dye, Congo red was chosen as a model dye to investigate batch decolorization efficiency by pellets. The pellets as biosorbent showed strong salt and acid tolerance in biosorption process. The results for dye adsorption showed that the biosorption process fitted well with models of pseudo-second-order kinetic and Langmuir isotherm, with a maximum adsorption capacity of 263.2 mg·g^(-1) mycelium. During 6 batches of continuous decolorization operation, the mycelial pellets could possess efficient decolorization abilities(>98.5%).The appearance of new peak in the UV–Vis spectral result indicated that the decolorization process may also contain biodegradation. The mechanism studies showed that efficient biosorption ability of pellets only relies on the active zone on the surface of the pellet, which can be enhanced by nutrition supplement or be shifted outward by a reculture process.

Decolorization on Indigo Dyeing Wastewater by Laccase from Coriolus versicolor

[ Object] The study aimed to discuss the decolorization on indigo dyeing wastewater by laccase from Coriolus versicolor. [ Method ] Firstly, the effects of temperature, pH, indigo concentration, HBT concentration, laccase dosage on the decolorization of indigo dyeing wastewater by laccase/HBT, and then the synergism of laccase and acid cellulase was analyzed. [Result] Using ABTS as the substrate, the kinetic parame- ters, K,, and Vmax, were 0.318 mmol/L and 0.035 5 mmol/（ L . min） respectively. The decolorization rate of indigo reached 96.5% when the lacca- se acted on indigo for 40 min with HBT as an introducer at temperature 50 ℃, pH =4.5, indigo concentration 100 mg/L, HBT concentration 0.1% and laccase dosage 100 lU/L. Due to the synergism of laccase and acid cellulase during the bio-finishing of blue jeans, the backstaining degree of blue jeans reduced by 85% when the amount of laccase added was 15 000 IU/kg. Menawhile, the synergism of the laccase and acid cellulase de- creased indigo concentration in wastewater by 83.8%. [ Conclusion ] The laccase from Coriolus versicolor had a good prospect in the bio-finishing of blue jeans and the decolorization of indigo dyeing wastewater.

Comparison of decolorization of reactive azo dyes by microorganisms isolated from various sources

Azo dyes are among the oldest man made chemicals and they are still widely used in the textile, printing and the food industries. About 10%-15% of the total dyes used in the industry is released into the environment during the manufacturing and usage. Some dyes and some of their N substituted aromatic bio transformation products are toxic and/or carcinogenic and therefore these dyes are considered to be environmental pollutants and health hazards. These azo dyes are degraded by physico chemical and biological methods. Of these, biological methods are considered to be the most economical and efficient. In this work, attempts were made to degrade these dyes aerobically. The organisms which were efficient in degrading the following azo dyes Red RB, Remazol Red, Remazol Blue, Remazol Violet, Remazol Yellow, Golden Yellow, Remazol Orange, Remazol Black were isolated from three different sources viz., wastewater treatment plant, paper mill effluent treatment plant and tannery wastewater treatment plant. The efficiency of azo dye degradation by mixed cultures from each source was analyzed. It was found that mixed cultures from tannery treatment plant worked efficiently in decolorizing Remazol Red, Remazol Orange, Remazol Blue and Remazol Violet, while mixed cultures from the paper mill effluent worked efficiently in decolorizing Red RB, Golden Yellow and Remazol Yellow. The mixed cultures from wastewater treatment plant efficiently decolorized Remazol Black.

小麦秸秆发酵产生的真菌Pleurotus ostreatus IBL-02锰过氧化物酶的溶胶-凝胶固定化及其催化污水脱色(英文)

Solid state bio-processing of wheat straw was carried out through an indigenous fungal strain Pleurotus ostreatus IBL-02 under pre-optimized fermentation conditions. The maximum activity, 692±12 U/mL, of the industrially important manganese peroxidase (MnP) enzyme was recorded after five days of still culture incubation. The crude MnP was 2.1-fold purified with a specific activity of 860 U/mg after purification on a Sephadex-G-100 gel column. On native and SDS-PAGE electrophoresis gels, the purified MnP fraction was a single homogenous band of 45 kDa. An active fraction of MnP was immobilized using hydrophobic sol-gel entrapment comprising tetramethoxysilane (T) and propyltrimethoxysilane (P) at different T:P molar ratios. Characterization revealed that after 24 h incubation at varying pH and temperatures, the MnP fraction immobilized at a T:P ratio of 1:2 in the sol-gel retained 82% and 75% of its original activity at pH4 and 70 ℃, respectively. The optimally active fraction at a 1:2 T:P ratio was tested against MnSO4 as a substrate to determine the kinetic catalytic constants KM and Vmax . To explore the industrial applicability of P. ostreatus IBL-02 MnP, both the free and immobilized MnP were used for the decolorization of four different textile industrial effluents. A maximum of 100% decolorization was achieved for the different textile effluents within the shortest time period. A lower KM , higher Vmax , hyper-activation, and enhanced acidic and thermal resistance up to 70 ℃ were the novel catalytic features of the sol-gel immobilized MnP, suggesting that it may be a potential candidate for biotechnological applications particularly for textile bioremediation purposes.

Effects of glucose on the decolorization of Reactive Black 5 by yeast isolates

The cometabolic roles of glucose were investigated in decolorization of an azo dye, Reactive Black 5, by yeast isolates, Debaryomyces polymorphus and Candida tropicalis. The results indicated that the dye degradation by the two yeasts was highly associated with the yeast growth process and glucose presence in the medium. Color removal of 200 mg dye/L was increased from 76.4% to 92.7% within 60 h to 100% within 18-24 h with the increase of glucose from 5 to 10 g/L, although the activity of manganese dependent peroxidase （MnP） decreased by 2-8 times in this case. Hydrogen peroxide of 233.3 μg/L was detected in 6 h in D. polymorphus culture. The cometabolic functions of glucose and hydrogen peroxide could be also confirmed by the further color removals of 95.8% or 78,9% in the second cycle of decolorization tests in which 7 g glucose/L or 250 μg H202/L was superadded respectively together with 200 mg dye/L.