Utilization of Basalt Saw Mud as a Spherical Porous Functional Aggregate for the Preparation of Ordinary Structure Concrete

To promote the production and application of artificial aggregates,save natural sand resources and protect the ecological environment,we evaluated the feasibility of using spherical porous functional aggregates(SPFAs) formed by basalt saw mud under autoclave curing in ordinary structural concrete.In our work,two types of prewetted functional aggregates were taken as replacements for natural aggregates with different volume substitution rates(0%,5%,10%,15%,20%,25%,and 30%) in the preparation of ordinary structural concrete with water-to-binder ratios(W/B) of 0.48 and 0.33.The effects of the functional aggregate properties and content,W/B,and curing age on the fluidity,density,mechanical properties and autogenous shrinkage of ordinary concrete were analyzed.The experimental results showed that the density of concrete declined at a rate of not more than 5%,and the 28 d compressive strength could reach 31.0-68.2 MPa.Low W/B,long curing age and high-quality functional aggregates were conducive to enhancing the mechanical properties of SPFAs concrete.Through the rolling effects,SPFAs can optimize the particle gradation of aggregate systems and improve the fluidity of concrete,and the water stored inside SPFAs provides an internal curing effect,which prolongs the cement hydration process and considerably reduces the autogenous shrinkage of concrete.SPFAs exhibits high strength and high density,as well as being more cost-effective and ecological,and is expected to be widely employed in ordinary structural concrete.

Experimental investigation of the inhibition of deep-sea mining sediment plumes by polyaluminum chloride

Deep-sea sediment disturbance may occur when collecting polymetallic nodules,resulting in the creation of plumes that could have a negative impact on the ecological environment.This study aims to investigate the potential solution of using polyaluminum chloride(PAC)in the water jet.The effects of PAC are examined through a self-designed simulation system for deep-sea polymetallic nodule collection and sediment samples from a potential deep-sea mining area.The experimental results showed that the optimal PAC dose was found to be 0.75 g/L.Compared with the test conditions without the addition of PAC,the presence of PAC leads to a reduction in volume,lower characteristic turbidity,smaller diffusion velocity,and shorter settling time of the plume.This indicates that PAC inhibits the entire development process of the plume.The addition of PAC leads to the flocculation of mm-sized particles,resulting in the formation of cm-sized flocs.The flocculation of particles decreases the rate of erosion on the seabed by around 30%.This reduction in erosion helps to decrease the formation of plumes.Additionally,when the size of suspended particles increases,it reduces the scale at which they diffuse.Furthermore,the settling velocity of flocs(around 10^(-2) m/s)is much higher that of compared to sediment particles(around 10^(-5) m/s),which effectively reduces the amount of time the plume remains in suspension.

Integrated biomarker response to assess toxic impacts of iron and manganese on deep-sea mussel Gigantidas platifrons under a deep-sea mining activity scenario

Deep-sea mining activities can potentially release metals,which pose a toxicological threat to deep-sea ecosystems.Nevertheless,due to the remoteness and inaccessibility of the deep-sea biosphere,there is insufficient knowledge about the impact of metal exposure on its inhabitants.In this study,deep-sea mussel Gigantidas platifrons,a commonly used deep-sea toxicology model organism,was exposed to manganese(100,1000μg/L)or iron(500,5000μg/L)for 7 d,respectively.Manganese and iron were chosen for their high levels of occurrence within deep-sea deposits.Metal accumulation and a battery of biochemical biomarkers related to antioxidative stress in superoxide dismutase(SOD),catalase(CAT),malondialdehyde(MDA);immune function in alkaline phosphatase(AKP),acid phosphatase(ACP);and energy metabolism in pyruvate kinase(PK)and hexokinase(HK)were assessed in mussel gills.Results showed that deep-sea mussel G.platifrons exhibited a high capacity to accumulate Mn/Fe.In addition,most tested biochemical parameters were altered by metal exposure,demonstrating that metals could induce oxidative stress,suppress the immune system,and affect energy metabolism of deep-sea mussels.The integrated biomarker response(IBR)approach indicated that the exposure to Mn/Fe had a negative impact on deep-sea mussels,and Mn demonstrated a more harmful impact on deep-sea mussels than Fe.Additionally,SOD and CAT biomarkers had the greatest impact on IBR values in Mn treatments,while ACP and HK were most influential for the low-and high-dose Fe groups,respectively.This study represents the first application of the IBR approach to evaluate the toxicity of metals on deep-sea fauna and serves as a crucial framework for risk assessment of deep-sea mining-associated metal exposure.

Solidification/Stabilization of Chromium in Red Mud-based Geopolymer

Up to 1.5wt%of Cr(Ⅲ)salts(CrCl_(3),and Cr_(2)O_(3))and Cr(Ⅵ)salts(Na_(2)CrO_(4),and CaCr_(2)O_(7))were incorporated into red mud-based geopolymers,respectively.The solidification/stabilization,compressive strength,and durability of the Cr-containing geopolymers were investigated.The experimental results indicate that the red mud-based geopolymer could effectively solidify/stabilize different types of Cr salts with solidification/stabilization rates of above 99.61%.Geopolymers are environmentally safe when the dosage of CaCr_(2)O_(7)is≤1.0wt%,or the dosage of CrCl_(3),Cr_(2)O_(3),and Na_(2)CrO_(4)is≤1.5wt%,respectively.The effects of Cr salts on the compressive strength varies with the type and content of Cr salts.The freeze-thaw cycle is more destructive to geopolymer properties than sulfate attack or acid rain erosion.The solidification/stabilization of Cr is mainly attributed to the following reasons:a)The chemical binding of Cr is related to the formation of Cr-containing hydrates(eg,magnesiochromite((Mg,Fe)(Cr,Al)_(2)O_(4)))and doping into N-A-S-H gel and C-A-S-H gel framework;b)The physical effect is related to the encapsulation by the hydration products(e g,N-A-S-H gel and C-A-S-H gel).This study provides a reference for the treatment of hazardous Cr-containing wastes by solid waste-based geopolymers.

Predicting impact forces on pipelines from deep-sea fluidized slides:A comprehensive review of key factors

Deep-sea pipelines play a pivotal role in seabed mineral resource development,global energy and resource supply provision,network communication,and environmental protection.However,the placement of these pipelines on the seabed surface exposes them to potential risks arising from the complex deep-sea hydrodynamic and geological environment,particularly submarine slides.Historical incidents have highlighted the substantial damage to pipelines due to slides.Specifically,deep-sea fluidized slides(in a debris/mud flow or turbidity current physical state),characterized by high speed,pose a significant threat.Accurately assessing the impact forces exerted on pipelines by fluidized submarine slides is crucial for ensuring pipeline safety.This study aimed to provide a comprehensive overview of recent advancements in understanding pipeline impact forces caused by fluidized deep-sea slides,thereby identifying key factors and corresponding mechanisms that influence pipeline impact forces.These factors include the velocity,density,and shear behavior of deep-sea fluidized slides,as well as the geometry,stiffness,self-weight,and mechanical model of pipelines.Additionally,the interface contact conditions and spatial relations were examined within the context of deep-sea slides and their interactions with pipelines.Building upon a thorough review of these achievements,future directions were proposed for assessing and characterizing the key factors affecting slide impact loading on pipelines.A comprehensive understanding of these results is essential for the sustainable development of deep-sea pipeline projects associated with seabed resource development and the implementation of disaster prevention measures.

Machine learning for carbonate formation drilling: Mud loss prediction using seismic attributes and mud loss records

Due to the complexity and variability of carbonate formation leakage zones, lost circulation prediction and control is one of the major challenges of carbonate drilling. It raises well-control risks and production expenses. This research utilizes the H oilfield as an example, employs seismic features to analyze mud loss prediction, and produces a complete set of pre-drilling mud loss prediction solutions. Firstly, 16seismic attributes are calculated based on the post-stack seismic data, and the mud loss rate per unit footage is specified. The sample set is constructed by extracting each attribute from the seismic trace surrounding 15 typical wells, with a ratio of 8:2 between the training set and the test set. With the calibration results for mud loss rate per unit footage, the nonlinear mapping relationship between seismic attributes and mud loss rate per unit size is established using the mixed density network model.Then, the influence of the number of sub-Gausses and the uncertainty coefficient on the model's prediction is evaluated. Finally, the model is used in conjunction with downhole drilling conditions to assess the risk of mud loss in various layers and along the wellbore trajectory. The study demonstrates that the mean relative errors of the model for training data and test data are 6.9% and 7.5%, respectively, and that R2is 90% and 88%, respectively, for training data and test data. The accuracy and efficacy of mud loss prediction may be greatly enhanced by combining 16 seismic attributes with the mud loss rate per unit footage and applying machine learning methods. The mud loss prediction model based on the MDN model can not only predict the mud loss rate but also objectively evaluate the prediction based on the quality of the data and the model.

A strength model for cement-stabilized mud subjected to various curing temperatures and its early-stage quality control

The influence of curing temperature on the strength development of cement-stabilized mud has been well documented in terms of strength-increase rate and ultimate strength.However,the strength development model is not mature for the extremely early stages.In addition,there is a lack of studies on quality control methods based on early-stage strength development.This paper presents a strength model for cement-stabilized mud to address these gaps,considering various curing temperatures and early-stage behaviors.In this study,a series of laboratory experiments was conducted on two types of muds treated with Portland blast furnace cement and ordinary Portland cement under four different temperatures.The results indicate that elevated temperatures expedite strength development and lead to higher long-term strength.The proposed model,which combines a three-step conversion process and a hyperbolic model at the reference temperature,enables accurate estimate of the strength development for cement-treated mud with any proportions cured under various temperatures.With this model,a practical early quality control method is introduced for applying cement-stabilized mud in field projects.The back-analysis parameters obtained from a 36-h investigation at temperature of 60C demonstrated a sufficient accuracy in predicting strength levels in practical applications.

Synergistic CO_(2) mineralization using coal fly ash and red mud as a composite system

CO_(2) mineralization plays a critical role in the storage and utilization of CO_(2).Coal fly ash(CFA)and red mud(RM)are widely utilized as CO_(2) mineralizers.However,the inert calcium species in CFA limit its carbonation capacity,meanwhile the substantial Ca^(2+)releasing of RM is hindered by a covering layer of calcium carbonate.In this study,CO_(2) mineralization in a composite system of CFA and RM was investigated to enhance the carbonation capacity.Multiple analyzers were employed to characterize the raw materials and resulting mineralization products.The results demonstrated that a synergistic effect existed in the composite system of CFA and RM,resulting in improving CO_(2) mineralization rate and efficiency.The produced calcium carbonate was ectopically attached the surface of CFA in the composite system,thus slowing down its coverage on the surface of RM.This phenomenon facilitated further releasing Ca^(2+)from the internal RM,thereby enhancing CO_(2) mineralization efficiency.Meanwhile,the inclusion of RM significantly improved the alkalinity of the composite system,which not only promoted the dissolution of Ca^(2+)of the inert CaSO_(4)(H_(2)O)_(2) in CFA,but also accelerated CO_(2) mineralization rate.The investigation would be beneficial to CO_(2) mineralization using industrial solid wastes.

Multiparameter Numerical Investigation of Two Types of Moving Interactions Between the Deep-Sea Mining Vehicle Track Plate and Seabed Soil:Digging and Rotating Motions

To ensure the safe performance of deep-sea mining vehicles(DSMVs),it is necessary to study the mechanical characteristics of the interaction between the seabed soil and the track plate.The rotation and digging motions of the track plate are important links in the contact between the driving mechanism of the DSMV and seabed soil.In this study,a numerical simulation is conducted using the coupled Eulerian–Lagrangian(CEL)large deformation numerical method to investigate the interaction between the track plate of the DSMV and the seabed soil under two working conditions:rotating condition and digging condition.First,a soil numerical model is established based on the elastoplastic mechanical characterization using the basic physical and mechanical properties of the seabed soil obtained by in situ sampling.Subsequently,the soil disturbance mechanism and the dynamic mechanical response of the track plate under rotating and digging conditions are obtained through the analysis of the sensitivity of the motion parameters,the grouser structure,the layered soil features and the soil heterogeneity.The results indicate that the above parameters remarkably influence the interaction between the DSMV and the seabed soil.Therefore,it is important to consider the rotating and digging motion of the DSMV in practical engineering to develop a detailed optimization design of the track plate.

Analysis of Calcined Red Mud Properties and Related Mortar Performances

Red mud(RM)is a low-activity industrial solid waste,and its utilization as a resource is currently a hot topic.In this study,the micro characteristics of red mud at different calcination temperatures were analyzed using X-ray diffraction and scanning electron microscopy.The performance of calcined red mud was determined through mortar strength tests.Results indicate that high-temperature calcination can change the mineral composition and microstructure of red mud,and increase the surface roughness and specific surface area.At the optimal temperature of 700°C,the addition of calcined red mud still leads to a decrease in mortar strength,but its activity index and flexural coefficient increase by 16.2%and 11.9%with respect to uncalcined red mud,reaching values of 0.826 and 0.974,respectively.Compared with the control group,the synergistic activation of calcined red mud with slag can increase the compressive and flexural strength of the mortar by 12.9%and 1.5%,reaching 8.7 and 62.4 MPa,respectively.Correspondingly,the activity index and flexural coefficient of the calcined RM and GGBS(Ground Granulated Blast furnace Slag)mixtures also increase to 1.015 and 1.130,respectively.

Detection of a mud volcano in the Weitan Banks area of the northern South China Sea

Situated between the petroliferous Cenozoic Zhujiang(Pearl)River Mouth Basin and the mud volcano-rich Mesozoic Dongsha Basin in the middle sector of the northern South China Sea,the Weitan Banks area has been previously mapped as a basement high that is composed of Mesozoic magmatic rocks.In this study,we present several favorable indicators for petroleum geology that were detected from geophysical profiling and benthic sampling in the area.A conspicuous hill was discovered,named“Zhongwei Hill”,~80 m high above the~340 m deep seafloor and~1 km broad,in a depression with more than 7 km thick sedimentary strata.The Zhongwei Hill was seismically imaged with a mushroom-shaped structure and containing a cake-like crown,fluid flow pipes,and an~10 km broad anticline at depth.Thus,the hill represents a source-plumbing-eruption system.Shallow gas zones linked to deep fracture were found at or near the hill.Stratigraphic correlation indicates that the deep strata comprise the Jurassic and Paleogene strata,the major hosts of hydrocarbon source rocks.In addition to the hill,there are number of mounds from which three bottom water samples were collected and the samples are rich in dissolved methane with concentrations high up to~900 nmol/L,much higher than the background level(0.5–2 nmol/L).The benthic samples are rich in coarse sediment clastics,authigenic carbonate nodules,and deep-water habitats likely feeding on methanotrophic community.Given these observations and the context,we propose that the Zhongwei Hill represents a mud volcano,likely thermally driven,that seeps methane from Jurassic and Paleogene source layers,thus poses a favorable clue for significant hydrocarbon generation capacity in transitional zone of the Zhujiang River Mouth Basin and the Dongsha Basin.

Response and assembly of abundant and rare taxa in Zaopei under different combination patterns of Daqu and pit mud:from microbial ecology to Baijiu brewing microecosystem

The quality and aroma of strong-flavor Baijiu are mainly dependent on Daqu,pit mud(PM),and the interaction of both.However,little is known about how their combination patterns affect the microbiome and metabolome of Zaopei,especially the metabolic function of rare taxa.Here,an experiment on industrial size was designed to assess the effects of 6 combinations(3 kinds of Daqu×2 kinds of PM)on the composition and assembly of different taxa,as well as the flavor profile.The results showed that Zaopei's microbiota was composed of a few abundant taxa and enormous rare taxa,and rare bacterial and abundant fungal subcommunities were significantly affected by combination patterns.The assembly processes of abundant/rare taxa and bacterial/fungal communities were distinct,and environmental changes mediated the balance between stochastic and deterministic processes in rare bacteria assembly.Furthermore,specific combination patterns improved the flavor quality of Zaopei by enhancing the interspecies interaction,which was closely related to rare taxa,especially rare bacteria.These findings highlighted that rare bacteria might be the keystone in involving community interaction and maintaining metabolic function,which provided a scientific foundation for better understanding and regulating the brewing microbiota from the viewpoint of microbial ecology.

Morphing the Rules:Advanced Adaptations of Mud in Nigerian Buildings

Mud is a ubiquitous building material in Nigeria,perhaps this is the reason why it is hardly seen as the outright building material that it is.The most popular contribution of mud to Nigerian architecture can only be seen in the ancient traditional huts all over the country.Although still a building material in the suburbs of the country,mud is seen as a relic of the past,a symbol of a primitive tale of Nigerian building construction.The primary effort here is to redefine mud as a“skin”with infinite possibilities of imagery and texture,rather than its typical application as a wall in Nigerian architecture.Mud is attempted to be expressed via a new geometric vocabulary by re-evaluating its surreptitious properties including its ability to behave like a formally defined NURBS(non-uniform rational basis spline)surface.The properties of mud and clay are unconventionally simulated in computer modelling and analysis software to understand the ways in which it can be optimized for advanced building applications.Streamlined calculations and algorithmic calculations serve as tools to discover the NURBS-propensity of mud.This provides a whole new low-cost construction opportunity for the building of irregularly flowing structures.

Formulating Dead Sea Mud in Cosmetic Products, Its Effects on Skin, and the Underlying Biological Mechanism: A Review

Research Background: The marketing of cosmetic products derived from Dead Sea (DS) mud has undergone significant evolution, transforming from simple souvenirs into a large-scale cosmetic industry offering a diverse array of products. DS mud is utilized both as pure mud for home spa treatments and as an active ingredient in cosmetic and cosmeceutical formulations. Its global appeal is largely due to its natural, health-oriented image, which aligns with consumer preferences and provides assurance regarding its use in skincare. Research Objectives: This review examines the published data related to the rationale for formulating DS mud in cosmetics, the biological and cosmetic effects of DS mud on the skin, and the speculated bio-mechanisms underlying these effects. Methods: We screened relevant literature on DS mud collected from the shores of the Dead Sea in Jordan and Israel. Publications on mineral muds excavated in different locations around the globe, as well as studies on the biological mechanisms of other DS minerals, were also reviewed as indications and supportive recommendations. Summarizing the vast collected data into a comprehensive review was undertaken to expose readers to the various aspects of DS mud in cosmetics. Results: The primary reason for formulating DS mud in skincare products is its deep cleansing and skin detoxification properties. Consequently, it is often incorporated into rinse-off masks, soaps, and scrubbing products. Additionally, DS mud is used in leave-on products and sheet masks. Cosmeceutical applications of DS mud, recommended for various skin conditions, offer complementary treatments to improve the quality of life for people with skin diseases. The physicochemical and biological effects of DS mud are driven by its rich mineral ion composition, including magnesium, calcium, sodium, potassium, zinc, and strontium—elements known to improve skin barrier function, enhance hydration, and reduce inflammation. The high salt concentration induces moderate ionic osmotic stress, stimulating cellular growth and hydration pathways. Moreover, DS mud’s anti-microbial properties further contribute to its therapeutic potential. Ongoing innovations in formulation techniques continue to expand the applications of DS mud, including blending it with other active ingredients, developing novel application methods, and refining manufacturing processes to improve product quality and efficacy. Conclusions: DS mud remains a valuable ingredient in modern skincare due to its rich mineral content and therapeutic properties. Ongoing research and technological advancements promise further innovations, reinforcing its status as a natural and effective component in the global cosmetics industry.

Real-Time Fracture Aperture Identification Using Mud Loss Data and Solution for LCM Combination

Managing server lost circulation is a major challenge of drilling operation in naturally fractured formations and it causes much nonproductive rig time. When encountered with loss, the fracture aperture intersecting the wellbore is not well-identified in time, which has a significant impact on the decision of drilling operation and the undesired result of loss curing. Therefore, the onset of fracture is identified in a timely manner and evaluated comprehensively to formulate an appropriate strategy over time. However, the mud loss date, which is the primary source of information retrieved from the drilling process, was not properly used in real-time prediction of fracture aperture. This article provides a detailed mathematical study to discuss the mechanism of mud invasion in the near-wellbore region and prediction of fracture aperture. The fracture aperture can be calculated from mud-loss data by solving a cubic equation with input parameters given by the well radius, the overpressure ratio, and the maximum mud-loss volume. It permits the proper selection of loss-circulation material (LCM) with respect to particle size distribution and fiber usage. The case study illustrates the applicability of this methodology with a discussion on LCM particle distribution in different scenarios and the result demonstrates the outcome of inappropriate LCM usage and the advantages of the novel fiber-based LCM treatment.

Growth and Diet Utilization Efficiencies of Overwinter Juvenile Mud Crabs Fed with Different Diets

[Objectives]To study the utilization efficiency of different diets for juvenile Scylla paramamosain.[Methods]Low-value fish,shrimp,clam and clamworm were fed to overwintering young mud crabs,and the performance of the feed was evaluated by growth,feed utilization and energy allocation.[Results]Shrimp-fed mud crabs showed the best growth performance,while fish-fed mud crabs showed the worst growth performance and converted the least protein and energy for growth.Shrimp-fed mud crabs molted more frequently,and the dry matter mass and energy of Exuviation were significantly higher than those of fish-fed mud crabs.The shrimp-fed crabs also had significantly higher food intake than those fish-fed crabs.The order of feed conversion efficiency(FCE)of fish-fed mud crabs was Polychaete>clam>shrimp>fish,while the order of FCE calculated with FCE-P and FCE-E was Polychaete>clam>shrimp>fish.Fish-fed mud crabs had the least energy intake and the least energy for growth,molting,excretion,metabolism,and feces.Among the four treatments,the mud crabs fed on Polychaete had the largest proportion of energy used for growth,while the mud crabs fed on fish had the largest proportion of energy used for molting.The proportion of energy consumed by mud crabs fed on Polychaete was the smallest,which may be the main reason for the higher FCE-P and FCE-E of mud crabs fed on Polychaete.[Conclusions]The results of this experiment showed that the utilization of low-value fish by mud crabs was the worst,suggesting that fish should not be used as control or reference food when studying the formula feed of mud crabs.

Recovery of yttrium from deep-sea mud

Deep-sea mud rich in rare earth yttrium has received lots of attention from the international community as a new resource for Y. A novel process, which mainly includes acid leaching, solvent extraction, and oxalic acid precipitation-roasting, is proposed for recovery of Y from deep-sea mud. A series of experiments were conducted to inspect the impacts of various factors during the process and the optimum conditions were determined. The results show that the Y of deep-sea mud totally exists in apatite minerals which can be decomposed by hydrochloric acid and sulfuric acid solution. The highest leaching efficiency of Y is 94.53% using hydrochloric acid and 84.38% using sulfuric acid under the conditions of H^＋concentration 2.0 mol/L, leaching time 60 min, liquid-solid ratio 4：1 and room temperature 25 ℃（only in case of sulfuric acid, when using hydrochloric acid, the leaching temperature should be 60 ℃）. Because of the much lower leaching temperature, sulfuric acid leaching is preferred. The counter current extraction and stripping tests were simulated by a cascade centrifugal extraction tank device. Using 10 vol% P204,15 vol% TBP and 75 vol% sulfonated kerosene as extractant, 98.79% Y^3＋ and 42.60% Fe^3＋ are extracted from sulfuric acid leaching liquor（adjusted to pH = 2.0） after seven-stage counter current extraction with O/A ratio of 1：1 at room temperature, while other metals ions such as Al^3＋, Ca^2＋, Mg^2＋and Mn^2＋ are almost not extracted. The Y^3＋ in loaded organic can be selectively stripped using 50 g/L sulfuric acid solution and the stripping efficiency reaches 99.86% after seven-stage counter current stripping with O/A ratio of 10：1 at room temperature, while only 2.26% co-extracted Fe^3＋ is stripped. The Y^3＋ of loaded strip liquor can be precipitated by oxalic acid to further separate Y^3＋ and Fe^3＋. The precipitation efficiency of Y^3＋ in loaded strip liquor can be 98.56% while Fe^3＋ is not precipitated under the conditions of oxalic acid solution concentration 200 g/L, quality ratio of oxalic acid to Y of 2, and precipitation time 0.5 h. And the precipitate was roasted at 850 ℃ for 3 h to obtain the oxide of Y in which the purity of Y_2 O_3/REO is 79.02% and the contents of major non-rare earth impurities are less than 0.21%.Over the whole process included acid leaching, solvent extraction, and oxalic acid precipitation-roasting,the yttrium yield is 82.04%.

Deep-sea rock mechanics and mining technology:State of the art and perspectives

The review covers the development and the state of the art in deep-sea mining rock mechanics,equipment and challenges.It begins by introducing the significance of deep-sea mining,the types and geographical distribution of deep-sea resources.Section 2 reviews the mechanical properties and fracture mechanism of seabed and related continental rocks,which contributes to the advancement of relevant technologies and theories.Deep-sea mining systems developed by coastal countries are presented in Section 3.Seabed mineral collection systems are critically assessed in Section 4.Subsea mining vehicle is reviewed by walking mechanism and controlling system in Section 5.In Section 6,the development of subsea lifting system is detailed by dividing it into hydraulic and pneumatic lifting modes,and some technical problems in the lifting system are described.An in-depth description of surface support systems is presented in Section 7,which includes the deep-sea mining ship,dynamic positioning system,heave compensation system,launch and retrieval system,mineral disposing system as well as the storage and transferring systems.Section 8 discusses the challenges in the deep-sea mining,in terms of natural occurrence conditions,international legal framework and cooperative mining,environmental protection and economic benefits,etc.Finally,a brief summary and some aspects of prospective research are presented in Section 9.

Interactions among deep-sea mussels and their epibiotic and endosymbiotic chemoautotrophic bacteria: Insights from multi-omics analysis

Endosymbiosis with Gammaproteobacteria is fundamental for the success of bathymodioline mussels in deep-sea chemosynthesis-based ecosystems. However, the recent discovery of Campylobacteria on the gill surfaces of these mussels suggests that these host-bacterial relationships may be more complex than previously thought. Using the cold-seep mussel(Gigantidas haimaensis) as a model, we explored this hostbacterial system by assembling the host transcriptome and genomes of its epibiotic Campylobacteria and endosymbiotic Gammaproteobacteria and quantifying their gene and protein expression levels. We found that the epibiont applies a sulfur oxidizing(SOX)multienzyme complex with the acquisition of sox B from Gammaproteobacteria for energy production and switched from a reductive tricarboxylic acid (rTCA) cycle to a Calvin-Benson-Bassham(CBB)cycle for carbon assimilation. The host provides metabolic intermediates, inorganic carbon, and thiosulfate to satisfy the materials and energy requirements of the epibiont, but whether the epibiont benefits the host is unclear. The endosymbiont adopts methane oxidation and the ribulose monophosphate pathway(Ru MP) for energy production, providing the major source of energy for itself and the host. The host obtains most of its nutrients, such as lysine, glutamine, valine,isoleucine, leucine, histidine, and folate, from the endosymbiont. In addition, host pattern recognition receptors, including toll-like receptors, peptidoglycan recognition proteins, and C-type lectins, may participate in bacterial infection, maintenance, and population regulation. Overall, this study provides insights into the complex host-bacterial relationships that have enabled mussels and bacteria to thrive in deep-sea chemosynthetic ecosystems.

Stress Path Analysis of Deep-Sea Sediments Under the Compression-Shear Coupling Load of Crawler Collectors

The mechanical properties of deep-sea sediments during the driving process of crawler collectors are essential factors in the design of mining systems.In this study,a crawler load is divided into a normal compression load and a horizontal shear load.Then,the internal stress state of sedimentary soil is examined through a theoretical calculation and finite element numerical simulation.Finally,the driving of crawlers is simulated by changing the relative spatial position between the load and stress unit,obtaining the stress path of the soil unit.Based on the calculation results,the effect of the horizontal shear load on the soil stress response is analyzed at different depths,and the spatial variation law of the soil stress path is examined.The results demonstrate that the horizontal shear load has a significant effect on the rotation of the principal stress,and the reverse rotation of the principal stress axis becomes obvious with the increase in the burial depth.The stress path curve of the soil is different at various depths.The spatial variation rule of the stress path of the shallow soil is complex,whereas the stress path curve of the deep soil tends to shrink as the depth increases.The stress path of the corresponding depth should be selected according to the actual research purpose and applied to the laboratory test.