Multichannel Adaptive Polarization Mode Dispersion Compensation with One Compensator in Dense Wavelength Division Multiplexing Transmission Systems

A simple two-section polarization mode dispersion(PMD) compensator is proposed for multichannel PMD compensation, which can compensate two or even more channels simultaneously. Because of the statistical characteristics and the frequency-dependence of PMD, for current single mode fiber with moderate PMD, the probability that all channels are severely degraded at the same time is extremely small, which makes it possible to compensate a dense wavelength division multiplexing(DWDM) transmission system with moderate PMD using this compensator. It is shown that the outage probability of a 40×43 Gb/s DWDM transmission system using this compensator is decreased significantly from 3.6×10-3 to 3.6×10-5.

Minimizing FWM Impact in DWDM ROF DP-DQPSK System for Optical

The demonstration of a higher data rate transmission system was amajor aspect to be considered by researchers in recent years. The most relevantaspect to be studied and analyzed is the need for a reliable system to handlenonlinear impairments and reduce them. Therefore, this paper examines theinfluence of Four-Wave Mixing (FWM) impairment on the proposed highdata rate Dual polarization–Differential Quadrature phase shift keying (DPDQPSK)system using the Optisystem software. In the beginning, the impactof varied input power on the proposed system’s performance was evaluated interms of QF and BER metrics. More power is used to improve system performance.However, increasing power would raise theFWMeffects. Accordingly,a−10dBminput power and the proposed system are used to reduce the impactof FWM. Additionally, a hybrid amplification method is proposed to enhancesystem performance by utilizing the major amplification methods of erbiumdopedfiber amplifier (EDFA): semiconductor optical amplifier (SOA) andRadio optical amplifier (ROA). The evaluation demonstrates that the OAEDFAoutperformed the other two key amplification techniques of (EDFASOA)and (EDFA-ROA) in improving Quality factor (QF) and Bit error rate(BER) system results for all distances up to 720 km. Consequently, the methodcontributes to minimizing the impact of FWM. In the future, other forms ofnonlinearity will be investigated and studied to quantify their impact on theproposed system.

Performance analysis of a hybrid optical CDMA/DWDM system against inter-symbol interference and four wave mixing

This paper reports the implementation and theoretical model for analyzing an optical CDMA/DWDM hybrid system to reduce two major problems,the Inter-Symbol Interference(ISI)and the Four-Wave Mixing(FWM)effects and improve the performance of optical subscriber access networks by using Zero Cross-Correlation(ZCC)optical codes,which helps to reduce the effect of the Multiple Access Interference(MAI).A squeezing method is used in the proposed hybrid system to completely suppress the ISI.In this method,the sequence interval of the signature code is squeezed into a duration of less than one-bit.The hybrid system is capable of accommodating 120 optical CDMA users carried by only 10 DWDM wavelengths spaced by 0.2 nm with 60 Gb/s/wavelength transmitted over 105.075 km of optical fiber.The result shows that the optimum interval of the code sequence is a quarter(i.e.,25%)of the bit duration.Moreover,the results reveal that the CDMA technology based on the spread spectrum is capable of increasing the nonlinear tolerance of the proposed hybrid system as the energy of bits is distributed over the chip sequence code.Also,the number of ones/weight and the positions between them have a significant effect on the performance of the proposed hybrid system.

AN EFFECTIVE MODEL TO EVALUATE BLOCKING PROBABILITY OF TIME-SLOTTED OPTICAL BURST SWITCHED NETWORKS

Time-slotted optical burst switched network is a potential technique to support IP over Wavelength Division Multiplexing (WDM) by introduce Time Division Multiplexing (TDM) channel to Optical Burst Switching (OBS) technology. This paper presents a framework to evaluate blocking performance of time-slot-ted OBS networks with multi-fiber wavelength channels. The proposed model is efficient for not only single class traffic such as individual circuit switch traffics or best-effort traffics but also mixed multi-class traffics. The effectiveness of the proposed model is validated by simulation results. The study shows that blocking per-formance of multi-fiber TS-OBS network is acceptable for future Internet services.

Waveguide Filter for Reducing Crosstalkin All Optical Networks

A novel filter structure which can reduce the crosstalk in cross-connection and switching in all optical networks based on dense wavelength division multiplexing (DWDM) is presented. The filter is constructed by dielectric waveguide with the waveguide boundary or the waveguide itself uncontinuous in transmitting direction. Using the concept of effective refractive index of plane waveguide system, we can get a special index profile along the wave propagation direction by alternatively changing the thickness of waveguide film or its refractive index. Having proved this kind of waveguides with filtering properties, the design principle of an example is given, which will be very useful to reduce the crosstalk in optical cross-connection and switching in all optical networks based on DWDM. This kind of filters can be easily connected with other related component.

From MEMS to NEMS： Smart Chips with Senses and Muscles

The last half-century was transformed by the electronic revolution that essentially reproduced the human brain and its computing capacity on a chip. But over time, scientists have realized that something was missing to give life, so to speak, to the small chip with a brain： One needed to awaken its senses and develop its muscles! This challenge was solved through MEMS （micro electro mechanical systems）. Indeed, MEMS today are equipped with the sense of sight, smell, hearing, taste and touch through microsensors. They are also capable of physical exertion through small muscles called microactuators. These new capabilities open wide fields of imagination and important specific applications.

An Arrangement of Channels and Transceivers in Optical Packet Switching Networks

Based on a media access and control（MAC）protocol,an arrangement of channels and transceivers in optical packet switching dense wavelength division multiplexing（DWDM）networks is proposed in this paper.In order to reduce the cost of nodes,fixed transmitters and receivers are used instead of tunable transmitters and receivers.Two fixed transmitters and many fixed receivers are used in each node in the scheme.The average waiting delay of this scheme is analyzed through mathematics and computer simulation.The result shows that the property of the scheme is almost the same as using tunable transmitter and receiver.Furthermore,if the tuning time of tunable transmitters is taken into account,the performance of the tunable transmitter scheme is poor than this scheme at the average waiting delay and throughput of the network.

Novel discretely tunable narrow linewidth fiber laser with uniform wavelength spacing

A novel configuration of the tunable fiber laser with uniform wavelength spacing in dense wavelength division multiplexing （DWDM） application is proposed. The ring type tunable fiber laser consists of an all-fiber comb filter which determines the wavelength spacing, and a piece of adjustable fiber grating to select the discrete lasing wavelength for DWDM application. The proposed all-fiber ring type tunable laser has potential application in the DWDM and other optical systems due to its advantages such as narrow linewidth, easv tuning, uniform wavelength interval, etc..

Generation of multi-wavelength light sources for optical communications in aperiodic optical superlattice

A method for generating multi-wavelength light source is theoretically investigated by optical parametric oscillation （OPO） in aperiodic optical superlattice （AOS）. The effects of domain errors caused by the ro om-temperature electric poling process are checked. The relationship between the linewidth and the block length is also discussed.

A cost-effective ultra-dense WDM PON system with speed of 12.5 Gbit/s and channel spacing of 12.5 GHz

A cost-effective ultra-dense wavelength-division-multiplexed passive optical network(UD-WDM PON) with speed of 12.5 Gbit/s and channel spacing of 12.5 GHz is proposed and demonstrated. The distributed feedback(DFB) lasers modulated in 4-level pulse amplitude modulation(4-PAM) format are used for downstream links, and the reflective semiconductor optical amplifiers(RSOAs) together with an optical frequency comb modulated in quadrature phase shift keying(QPSK) format are used for upstream links. We can achieve the error-free transmission of the upstream signals with speed of 12.5 Gbit/s even after 20 km single-mode fiber(SMF). The power penalty obtained by using the frequency comb generator instead of a tunable laser is around 0.5 d B. By using 11 DFB lasers and a set of intensity and phase modulators, it is possible to provide the seed light for 297 optical network units(ONUs) within the C-band.

High accuracy wavelength locking of a DFB laser using tunable polarization interference filter

A temperature-tunable polarization interference filter (PIF) made of YVO4 crystal has been presented and applied for wavelength locking of a distributed feedback (DFB) semiconductor laser in dense wavelength-division-multiplexing (DWDM) optical communication systems. This new design offers a flexible way to monitor and then lock an operating wavelength of DFB laser to any preselected point without dead spots. The results show that the laser wavelength can be locked with accuracy better than +0.01 nm with much relaxed requirement on temperature stability of the filter.

Simultaneous frequency transfer and time synchronization over a 430 km fiber backbone network using a cascaded system

Based on dense wavelength-division multiplexing technology, frequency transfer and time synchronization are simultaneously realized over a compensated cascaded fiber link of 430 km, which is a part of the Beijing- Shanghai optical fiber backbone network. The entire cascaded system consists of two stages with fiber links of 280 and 150 km, respectively. To keep high symmetry and low noise, specific bi-directional erbium-doped fiber amplifiers are used to compensate the large optical attenuation of each fiber link. When the compensation servo is active in every stage, the cascaded system achieves the stability of 1.94 × 10-13 at I s and 1.34 × 10-16 at 104 s, for frequency transfer. It is also verified that the actual results of the cascaded system are in good agreement with the theoretical ones calculated from error theory. Simultaneously, after calibration of each stage, time synchronization is also realized. The final accuracy of the whole system is within 94 ps.

Cross-phase modulation-induced penalties in multichannel DWDM optical transport networks

In dense wavelength division multiplexing (DWDM) optical transmission systems, cross-phase modulation (XPM) due to Kerr effect causes phase shift on each channel, which will ultimately be transformed to amplitude noise that leads to power penalties. In this letter, the XPM-induced penalty in multi-channel DWDM systems is investigated theoretically and an applied algorithm that can be practically used in engineering design is proposed.

Optimization design of optical waveguide in mach-zehnder electro-optical polymer modulator

In order to reduce transmission loss of the optical waveguide in Mach-Zehnder (M-Z) electro-optical (EO) polymer modulator,the basic iterative formula of semi-vector finite-difference beam propagation method (FD-BPM) is obtained from the scalar wave equation. The transition waveguide is combined with S-type bend branch waveguide for the M-Z EO modulator in the branch waveguide. The effects of structure parameters such as ridge width,length of the branch waveguide and interferometer spacing on the transmission loss are systematically studied by using the semi-vector FD-BPM method. The structure is optimized as an S-sine bend branch waveguide,with rib width w=7μm,length of branch waveguide L=1200μm and interferometer spacing G=22 μm. The results show that the optimized structure can reduce transmission loss to 0.083 dB,which have a certain reference value to the design of optical waveguide in M-Z polymer modulator.

Upstream dispersion management of 25 Gb/s duobinary and PAM-4 signals to support 0–40 km differential reach

We extensively discuss 25 Gb/s per wavelength capacity in both IEEE and ITU-T standardization to support the increasing bandwidth requirement. In this Letter, we propose to use the optical dispersion compensation technique in an optical line terminal（OLT） combined with a bandwidth-limited electro-absorption modulated laser in an optical network unit to achieve 25 Gb/s capacity for the upstream link. We evaluate the positive and negative dispersion tolerances of 25 Gb/s electrical duo-binary（EDB） and pulse-amplitude modulation（PAM-4） signals. We achieve 39.5 and 31 d B upstream loss budgets for the 25 Gb/s EDB and PAM-4 signals by using-600 and-500 ps∕nm optical dispersion compensation in OLT, respectively, both supporting 0–40 km differential reach.

A PMD-supported 100-Gb/s optical frequency-domain IM-DD transmission system

A novel method for distortion-free optical pulse transmission is theoretically proposed and simulated, in which two time lenses formed by dispersion fibers and quadratic phase modulations are utilized. One is used as an optical inverse Fourier transformation （OIFT） device to transform the initial time-domain data to frequency-domain one at the transmitter and the other as an optical Fourier transformation （OFT） device to recover the data at the receiver. By using the unchanged spectral envelope in linear optical fiber communication, the initial data can be recovered. Through simulations, a 10× 100 Gb/s intensity-modulated direct-detection （IM-DD） dense wavelength division multiplexing （DWDM） system over 20000 km transmission without the compensation for polarization mode dispersion （PMD） and dispersion slope is achieved, which can be used to upgrade the current 100Gb/s IM-DD system to a 100-Gb/s one directly.

Rectangular optical filter based on high-order silicon microring resonators

The rectangular optical filter is one of the most important optical switching components in the dense wavelength divi- sion multiplexing （DWDM） fiber-optic communication system and the intelligent optical network. The integrated high- order silicon microring resonator （MRR） is one of the best candidates to achieve rectangular filtering spectrum re- sponse. In general, the spectrum response rectangular degree of the single MRR is very low, so it cannot be used in the DWDM system. Using the high-order MRRs, the bandwidth of flat-top pass band, the out-of-band rejection degree and the roll-off coefficient of the edge will be improved obviously. In this paper, a rectangular optical filter based on high- order MRRs with uniform couplers is presented and demonstrated. Using 15 coupled race-track MRRs with 10 pm in radius, the 3 dB flat-top pass band of 2 nm, the out-of-band rejection ratio of 30 dB and the rising and falling edges of 48 dB/nm can be realized successfully.

1.55-μm Si-based MOEMS optical tunable filter

A prototype 1.55-um Si-based micro-opto-electro-mechanical-systems (MOEMS) tunable filter is fabricated, employing surface micromachining technology. Full-width-at-half-maximum (FWHM) of the transmission spectrum is 23 nm. The tuning range is 30 nm under 50-V applied voltage. The device can be readily integrated with resonant cavity enhanced (RCE) detector and vertical cavity surface emitting laser (VCSEL) to fabricate tunable active devices.

Impact of polarization mode dispersion and nonlinearities on 2-channel DWDM chaotic communication systems

This paper has designed 2-channel dense wavelength division multiplexing （DWDM） chaotic sys- tem at the frequencies of 193.1 and 193,2THz, respec- tively. The optical chaotic signals were produced by using the semiconductor laser that is numerically modeled by employing laser rate equations. These two channels were multiplexed and then propagated through single mode optical fiber （SMF） of 80kin length with dispersion compensating fiber of 16 km length. Erbium doped fiber amplifier （EDFA） was used to compensate the power losses in the SMF. In lhis paper, we investigated the effects of polarization mode dispersion （PMD） and nonlinearities especially stimulated Raman scattering （SRS） on 2 channel DWDM chaotic communication system by varying the length of the SMF and value of differential group delay （DGD）.