Simulation Study of Heat Flux Deposition Pattern on the Surface of HT-7 Toroidal Limiters

The heat flux deposition pattern on the toroidal limiters installed in HT-7 was simulated with ANSYS code. The simulation model was established with the ripple of the magnetic field. The heat deposition pattern and temperature distribution on the surface of the toroidal linfiters were obtained. A comparison of the results obtained with and without the shaped tiles, used to reduce the heat flux on the leading edge of the limiters, was made. The maximum heat load allowed at the leading edge was about 1.8 MW/m2 because of the poor power removing capacity on the ends of the limiters. This approach can also be applied to other devices with a limiter configuration in a circular cross-section shape.

Distribution and deposition of polycyclic aromatic hydrocarbons in precipitation in Guangzhou, South China

Polycyclic aromatic hydrocarbons （PAHs） were measured in precipitation from March to August 2005 in Guangzhou, South China. Fourteen PAHs were studied, and their total concentrations varied from 616.6 to 3486.7 ng/L in dissolved phase and from 403.8 to 3125.5 ng/L in particulate phase. The estimated deposition loading of PAHs was 3568 ug/m^2 during the monitoring period. The deposition of PAHs was a potential source for Pearl River comparing with the contents of surface water. In addition, the high concentration in precipitation here implied that PAHs pollution was a potential environmental problem in Guangzhou. Most precipitation concentrations of PAHs in March （the last month in winter in Guangzhou） were higher than in the other months （in rainy season）. PAHs inclined to be adsorbed to particulate phase with the increase of molecular weight in rainwater. Combustion of fossil fuel and biomass might be the major source of PAHs, while the direct leakage or volatilization from petroleum products might be insignificant.

Spatial distribution and deposition history of nonylphenol and bisphenol A in sediments from the Changjiang River(Yangtze River) Estuary and its adjacent East China Sea

Nonylphenol（NP） and bisphenol A（BPA） are endocrine disruptors causing harmful effects including feminization and carcinogenesis to various organisms,and consequently,their contamination in natural environment has received wide concerns.This study reports the distribution characteristics of NP and BPA in surface sediments and their deposition history based on a dated sediment core in the Changjiang River（Yangtze River） Estuary and its adjacent East China Sea.The contents of NP and BPA in surface sediments ranged from 1.56-35.8 and 0.72-13.2 ng/g（dry mass）,respectively,with high values recorded in the two mud zones,the Changjiang River Estuarine Mud Zone and the Zhejiang Coastal Mud Zone.High values in the Zhejiang Coastal Mud Zone suggest the possibility of long distance transport of both contaminants through the Changjiang riverine plume.The contents were not correlated with the distance from the pollution source,indicating other factors including particle deposition rate and sediment grain size obviously affecting the distribution pattern.NP was also detected in a sediment core at layers deposited from the year of 1971 to 2001 with contents of up to 20.9 ng/g（dry mass）.The deposition fluxes of NP varied from 0.68 to 17.9 ng/（cm^2 · a） with peaks and valleys reflecting the traces of economic development history in China during the previous three decades.BPA was detected at sediment layers deposited from 1973 to 2001 with contents of up to 3.66 ng/g.The fluxes of BPA varied from 0.62 to 3.13 ng/（cm^2 · a） showing a similar pattern as NP.The contents of NP and BPA also indicated potential risks on benthic organisms in the study area.

An assessment of variations in mercury deposition to Antarctica over the past 34,000 years

We performed a comparison analysis of the variations .in Mercury ( Hg) concentrations and the precipitation proxies ( e. g. , 18 O values and 10 Be concentrations) in the Dome C ice core. The results showed that there were significant correlations between Hg and δ 10O values, 10Be concentrations, indicating that the accumulation rate in Dome C is one of the key factors controlling the variations of Hg concentrations in the past 34 ,000 years, and implying that Hg concentrations in ice core can be used as another reliable proxy of precipitation rate in Antarctica. Based upon the high-resolution δ 18O values, we estimated the variations in mercury deposition flux to Antarctica over the past 34,000 years. The highest mercury deposition flux is about 3. 80 pg cm-2 yr-1 during the Last Glacial Maxium (LGM) as high as 3. 5 times of the mercury deposition flux ( about 1. 08 pg cm -2 yr -1) in Holocene due to the fluctuations in natural mercury emissions such as the oceanic biological emissions.

Study on the Characteristics of Atmospheric Dry and Wet Deposition in the Upper Reaches of Baiyangdian

To study the characteristics of atmospheric dry and wet deposition in the upper reaches of Baiyangdian,two sampling sites in Baoding City were monitored for 1 year from September 2018 to August 2019.The results showed that the dry and wet deposition fluxes of total nitrogen(TN)during the monitoring period were 6.87 and 6.46 kg/(hm^(2)·a),respectively.The ratio of wet to dry deposition of TN was approximately 1∶1,with wet deposition being dominated by ammonium nitrogen deposition.The dry and wet deposition fluxes of total phosphorus(TP)were 0.228 and 0.125 kg/(hm^(2)·a),and it was dominated by dry deposition.The average concentration of TN in wet deposition exceeded the standard threshold for eutrophic waters,and its ecological effects on the Baiyangdian basin should be concerned.Wet deposition fluxes of nitrogen and phosphorus had a significantly positive correlation with rainfall,while their deposition concentrations were negatively correlated with rainfall.The dry deposition of atmospheric nitrogen and phosphorus was influenced by the amount of dustfall and climatic factors such as rainfall,temperature,and humidity,which mainly occurred from April to August.

Numerical Investigation of Heat Deposition Patterns on the Surface of HT-7 Actively Cooled Toroidal Limiter

Two water cooled toroidal limiters were used in HT-7 to exhaust power effectively since the spring campaign of 2004. The heat flux deposition pattern on their surfaces both in steady state and transient state, caused only by plasma displacement, were studied with ANSYS code. The ripple of the toroidal magnetic field was taken into account. The heat flux deposition appeared to be periodic. The ripple and the relative location of the limiter to the toroidal field （TF） coils, as well as the shift of the center of the last closed flux surface （LCFS）, had a vital influence upon the heat flux profile. The location with maximum temperature didn＇t coincide with that for the maximum heat flux in a transient state. The shift of the center of LCFS, caused by plasma displacement, made the heat flux on the limiter more uneven. The heat flux deposition pattern concerning the real shift of the center of LCFS at a transient state calls for further research.

Atmospheric particle-bound mercury in the northern Indo-Gangetic Plain region:Insights into sources from mercury isotope analysis and influencing factors

Lumbini is a world heritage site located in the southern plains region of Nepal, and is regarded as a potential site for evaluating transboundary air pollution due to its proximity to the border with India. In this study, 82 aerosol samples were collected between April 2013 and July 2014 to investigate the levels of particulate-bound mercury(PBM) and the corresponding seasonality, sources, and influencing factors.The PBM concentration in total suspended particulate(TSP) matter ranged from 6.8 pg m^(-3) to351.7 pg m^(-3)(mean of 99.7 ± 92.6 pg m^(-3)), which exceeded the ranges reported for remote and rural sites worldwide. The Hg content(PBM/TSP) ranged from 68.2 ng g^(-1) to 1744.8 ng g^(-1)(mean of 446.9 ±312.7 ng g^(-1)), indicating anthropogenic enrichment. The PBM levels were higher in the dry season(i.e.,winter and the pre-monsoon period) than in the wet season(i.e., the monsoon period). In addition, the δ^(202) Hg signature indicated that waste/coal burning and traffic were the major sources of Hg in Lumbini during the pre-monsoon period. Meanwhile, precipitation occurring during photochemical processes in the atmosphere may have been responsible for the observed Δ^(199) Hg values in the aerosol samples obtained during the monsoon period. The PBM concentration was influenced mostly by the resuspension of polluted dust during dry periods and crop residue burning during the post-monsoon period. The estimated PBM deposition flux at Lumbini was 15.7 lg m^(-2) yr^(-1). This study provides a reference dataset of atmospheric PBM over a year, which can be useful for understanding the geochemical cycling of Hg in this region of limited data.

Excess polonium-210 in the coastal atmosphere originating from marine biogenic material

The depositional fluxes of atmospheric polonium-210 were measured at one site in Xiamen from August 2001 to March 2002. With predominant marine air mass, the depositional fluxes of atmospheric polonium-210 ranged from 0.01 to 0.09 Bq/（m^2· d）, with an average of 0.04 Bq/（m^2 · d）. The seasonal pattern showed elevated polonium-210 fluxes in summer and autumn rather than in winter. Atmospheric depositional fluxes of polonium-210 showed a good correlation with beryllium-7 （r^2 =0. 85） and lead-210 fluxes （r^2 =0.71 ）, indicating their similar removal mechanism from atmosphere. The relationship between the polonium-210 depositional fluxes and the precipitation amount demonstrated that the precipitation dominates the polonium-210 removal from the atmosphere. The observed high activity ratios of polonium-210 to lead-210 indicated the occurrence of excess polonium-210 in coastal atmosphere, which may originate from marine surface waters either by indirect （foam）, or mare likely, direct （ air - sea exchange） input of marine bingenic material into the atmosphere. This source is even more important than the in situ decay of lead-210.

Source and deposition of polycyclic aromatic hydrocarbons to Shanghai,China

Despite recent efforts to investigate the distribution and fate of polycyclic aromatic hydrocarbons （PAHs） in air, water, and soil, very little is known about their temporal change in wet deposition. As a result of increased attention to public health, a large-scale survey on the deposition flux and distribution of PAH contamination in rainwater was urgently conducted in Shanghai, China. In this study, 163 rainwater samples were collected from six sites, and 15 PAH compounds were detected by the use of a simple solid phase microextraction （SPME） technique coupled with gas chromatography-mass spectrometry. The dominant PAH species monitored were naphthalene, phenanthrene, anthracene, and fluoranthene. The concentration of total PAHs per event was between 74 and 980 ng/L, with an average value of 481 ng/L, which is at the high end of worldwide figures. The annual deposition flux of PAHs in rainwater was estimated to be 4148 kg/yr in the Shanghai area, suggesting rainfall as a major possible pathway for removing PAHs from the atmosphere. Diagnostic analysis by the ratios of An/178 and Fl/Fl＋Py suggested that combustion of grass, wood, and coal was the major contributor to PAHs in the Shanghai region. Back trajectory analysis also indicated that the pollutant sources could be from the southern part of China.

Dry deposition of PM_(10) over the Yellow Sea during Asian dust events from 2001 to 2007

Dry deposition velocities and fluxes of PM10 during Asian dust events over the Yellow Sea from 2001 to 2007 were investigated using observation data in Qingdao, China and Jeju, Korea. The dry deposition velocities of PM 10 during dust events over the Yellow Sea ranged from 0.19 to 8.17 cm/sec, with an average of 3.38 cm/sec. Dry deposition fluxes of PM10 during dust events over the Yellow Sea were in the range of 68.5-2647.1 mg/（m2.day）, with an average of 545.4 mg/（m2.day）, which is 2-10 times higher than those reported by other studies for both dust and non-dust periods. It was estimated that 2.6× 10^11-48.7 × 10^11 g dust particles deposit to the Yellow Sea during dust events through dry deposition every year. Compared with the results in previous studies, it was found that the dry deposition of PM10 over the Yellow Sea during dust events in the years with high frequency of dust could account for a large or overwhelming fraction of the annual total dry deposition. Backward air mass trajectory analysis showed that dust events influenced Jeju mainly originated from the desert regions located in Mongolia and Inner Mongolia, China. There were 119 backward trajectories influenced both Qingdao and Jeju during 15 dust events from 2001 to 2007, accounting for 61.3% of the total trajectories of 194, indicating that Qingdao and Jeju were usually on the same pathway of dust transport downwind from source areas.

Ozone concentrations, flux and potential effect on yield during wheat growth in the NorthwestShandong Plain of China

Ozone（O3） concentration and flux（Fo） were measured using the eddy covariance technique over a wheat field in the Northwest-Shandong Plain of China. The O3-induced wheat yield loss was estimated by utilizing O3exposure-response models. The results showed that：（1） During the growing season（7 March to 7 June, 2012）, the minimum（16.1 ppb V） and maximum（53.3 ppb V）mean O3 concentrations occurred at approximately 6：30 and 16：00, respectively. The mean and maximum of all measured O3 concentrations were 31.3 and 128.4 ppb V, respectively. The variation of O3 concentration was mainly affected by solar radiation and temperature.（2） The mean diurnal variation of deposition velocity（V d） can be divided into four phases, and the maximum occurred at noon（12：00）. Averaged V d during daytime（6：00–18：00） and nighttime（18：00–6：00） were 0.42 and 0.14 cm/sec, respectively. The maximum of measured V d was about1.5 cm/sec. The magnitude of V d was influenced by the wheat growing stage, and its variation was significantly correlated with both global radiation and friction velocity.（3） The maximum mean F o appeared at 14：00, and the maximum measured F o was-33.5 nmol/（m^2·sec）. Averaged F o during daytime and nighttime were-6.9 and-1.5 nmol/（m^2·sec）, respectively.（4） Using O3 exposure-response functions obtained from the USA, Europe, and China, the O3-induced wheat yield reduction in the district was estimated as 12.9% on average（5.5%–23.3%）. Large uncertainties were related to the statistical methods and environmental conditions involved in deriving the exposure-response functions.

Pollution characteristics of atmospheric dustfall and heavy metals in a typical inland heavy industry city in China

Through field sampling of atmospheric dustfall in regions of Zhuzhou City, China for a period of one year, the deposition fluxes of atmospheric dustfall and five heavy metals contained inside, including Cr, As, Cd, Hg and Pb, were analyzed. Meanwhile the enrichment factor and index methods were used to analyze the pollution characteristics of heavy metals of atmospheric dustfall in Zhuzhou. The annual deposition flux of atmospheric dustfall in Zhuzhou was 50.79 g/（m^2.year）, while the annual deposition fluxes of Cr, As, Cd, Hg and Pb were 9.80, 59.69, 140.09, 0.87 and 1074.91 mg/（m^2.year）, respectively. The pollution level of atmospheric dustfall in Zhuzhou was relatively lower compared with most other cities in China, but the deposition fluxes of As, Cd, Hg and Pb in atmospheric dustfall in Zhuzhou were much higher than that in most cities and regions around the world. Cd is the typical heavy metal element in atmospheric dustfall in Zhuzhou, and both the enrichment factor and pollution index of Cd were the highest. Cd, Hg, Pb and As in atmospheric dustfall were mainly from human activities. According to the single-factor index, Nemerow index and pollution load index analyses, the atmospheric dustfall in Zhuzhou could easily cause severe heavy metal pollution to urban soil, and the most polluting element was Cd, followed by Pb, As and Hg. Only the pollution level of Cr lay in the safety region and mainly originated from natural sources.

Improved atmospheric mercury simulation using updated gas-particle partition and organic aerosol concentrations

The gaseous or particulate forms of divalent mercury(HgⅡ) significantly impact the spatial distribution of atmospheric mercury concentration and deposition flux(FLX). In the new nested-grid GEOS-Chem model, we try to modify the HgⅡ gas-particle partitioning relationship with synchronous and hourly observations at four sites in China. Observations of gaseous oxidized Hg(GOM), particulate-bound Hg(PBM), and PM 2.5 were used to derive an empirical gas-particle partitioning coefficient as a function of temperature( T) and organic aerosol(OA) concentrations under different relative humidity(RH). Results showed that with increasing RH, the dominant process of HgⅡ gas-particle partitioning changed from physical adsorption to chemical desorption. And the dominant factor of HgⅡ gas-particle partitioning changed from T to OA concentrations. We thus improved the simulated OA concentration field by introducing intermediate-volatility and semi-volatile organic compounds(I/SVOCs) emission inventory into the model framework and refining the volatile distributions of I/SVOCs according to new filed tests in the recent literatures. Finally, normalized mean biases(NMBs) of monthly gaseous element mercury(GEM), GOM, PBM, WFLX were reduced from-33%–29%, 95%–300%, 64%–261%, 117%–122% to-13%–0%,-20%–80%,-31%–50%,-17%–23%. The improved model explains 69%–98% of the observed atmospheric Hg decrease during 2013–2020 and can serve as a useful tool to evaluate the effectiveness of the Minamata Convention on Mercury.