Beam Line Design of Compact Laser Plasma Accelerator

A compact laser plasma accelerator that is a novel accelerator based on the interaction of ultra-intense laser and plasmas is being built now at Peking University. According to the results of experiments and numerical simulations, a beam line combining the advantages of quadrupole and analyzing magnets is designed to deliver proton beams with energy ranging from 1 to 44MeV, energy spread within ±5% and 10^6-8 protons per pulse. It turns out that the existence of space charge force of protons can be ignored for the increase of transverse and longitudinal envelopes even in the case of 10^9 protons in one pulse. To cope with the challenge to obtain a uniform distribution of protons at the final experiment target in laser acceleration, we manipulate the envelope beam waist in the Y direction to a proper position and obtain a relatively good distribution uniformity of protons with an energy spread of 0-±5%0.

Design Curves for Mooring Lines of Turret Mooring Systems

This paper presents a series of design curves to aid in the selection of turret mooring systems for tankers based Floating Production Storage and Offloading (FPSO) systems. These curves are appropriate to water depths ranging from 100 m to 600 m. The curves can be used as a preliminary design tool, allowing the designer to quickly evaluate alternative mooring system configurations, including the number of mooring lines, the characteristics of chain and wire rope to be deployed and the. initial tension. With a knowledge of the total environmental force and vessel motion characteristics, the designer can determine the appropriate system for closer evaluation.

Research on Flexible Transfer Line Schematic Design Using Hierarchical Process Planning

Flexible transfer line(FTL)is now widely used in ma ny manufacturing domains to realize efficiently,high quantity and economic prod uction.These manufacturing domains include automobile,tractor,internal-combu stion engine,and so on.In today’s competitive business environment,it is vit ally important for machine tool manufacturers to design flexible transfer line m ore effectively and efficiently according to a wider variety of customer demand s.This paper proposes an approach to a bidding-based flexible transfer line sc hematic design system.By analyzing manual FTL design process,the architecture o f flexible transfer line schematic design system(FTLSDS)is established.The syst em consists:of four processes:part feature modeling,process planning,FTL fac i lity layout and FTL evaluation. For FTL schematic design.a five-level proces s planning strategy named hierarchical process planning method is proposed.This method includes selection of manufacturing feature machining operation;part se t-up planning,feature sequencing,operation sequencing and process plan genera ting.The major decision relies on setup planning.According to the proceeding o f the hierarchical process planning,the structure of reasoning is proposed base d on blackboard.Under this paradigm,a cooperative effort between a hybrid coll ection of knowledge sources is possible.Total reasoning task can be divided int o some subtasks,and recursive-reasoning system is formed.It is convenient for process planning with step-by-step solution.Meanwhile,the blackboard is use d as the global data exchange area during all reasoning process.By using modula r technology,special purpose machine tools can be designed more efficiently and rapidly.The framework of machine modular design system to support machine requ irement design for FTL is established.By synthesizing the FTL evaluation criter ia.five evaluation criteria of flexible transfer 1ine schematic design are take n into account.An exampie is supplied to demonstrate and verify the validity an d feasibility of flexible transfer line schematic design approach.

Design of 1000-kV AC Single-Circuit Overhead Transmission Line

The UHVAC 1 000-kV transmission system is so far the one with the most advanced transmission technique applied and highest operation voltage.There are no guidelines or standards available for the design of 1 000-kV overhead transmission line in China.Study on key technologies and design schemes shall be carried out to ascertain the technical principles and construction standards for project construction,which are presented in this paper based on the Southeast Shanxi-Nanyang-Jingmen test and demonstration transmission line.A comparison and analysis of technical data and economic indices between UHV line and other lines are also described.

OpenRoads Designer软件在云华水库下游灌区总干渠设计中的应用

利用OpenRoads Designer软件,以云南省云龙县云华水库下游灌区工程为例,提出一套适用于线路工程的正向设计方法。实例证明:可精准统计结构工程量及土方开挖量,提高工作效率,降低手动计算的潜在出错率,为类似工程提供参考。

Compact Car-Body Surface Design with T-spline Surface

Creating proper B-spline surface models is a very challenging task for designers in car-body surface design.Due to the tensor-product structure of B-spline surface,some undesirable issues of the redundant control points addition,incomplete surface definition and the difficulty of trimming boundary alteration frequently occur,when designing the car-body surface with B-spline surfaces in local-feature-lines construction,full-boundary-merging and visual surface trimming.A more efficient approach is proposed to design the car-body surface by replacing B-spline surface with classical T-spline surface.With the local refinability and multilateral definition offered by Tspline surface,those designing issues related with B-spline surface can be overcomed.Finally,modeling examples of the door,hood and rear-window are given to demonstrate the advantage of T-spline surface over B-spline surface in car-body surface design.

Extending the Civilization Axis Line:The 2008Olympic Venue Designs

On July 14, the 2008 Summer Olympic Venue Design Competition concluded with a U.S.-China joint venture scooping the first prize. The event was held for the conceptual designs of two major venues for the Games ?the Olympic Green and the Wukesong Culture and Sports Center. A total of 87 plans were submitted since the contest was opened in April, 54 for the Olympic Green and 33 for the Wukesong Center.San Francisco-based Sasaki Associates won the top prize for the Olympic Green which was designed in partnership with Tianjin

Design Method for Road Reconstruction and Expansion

This article analyzes the method for designing routes in road reconstruction and expansion projects,using an actual engineering project as an example.This includes an overview of a specific road reconstruction and expansion project,an analysis of the preexisting road,the basic principles of the design road project,and an analysis of the design methods and steps.This study aims to offer some guidance for road reconstruction and expansion design.

Research on Rapid Response Schematic Design for Flexible Transfer Line CAPP-Based

To meet the market requirements for Flexible Transf er Line (FTL), which consists of modular NC machining tools of high quality and co st saving, the methodologies and technologies of client-oriented FTL rapid resp onse schematic design CAPP-based, one of the key techniques, are presented in t his paper. In order to achieve this purpose, an integrated system for integrated design of CAD/CAPP/FTL with box-type parts is realized. In this paper, firstly the theory of the conceptual design of FTL based on CAPP is established and the software architecture is developed. The global-domain pr oduct model is put forward to meet with data representation. After the manufactu ring feature is analyzed and decomposed for machining operations, the feature-b ased part unified data model object-oriented is built. Secondly the knowledge- based CAPP system data model is established. The process planning unit model is formed by work element (WE), which is tool-cell based function abstraction meth od, and has unified layers with respect to designing and manufacturing. With WEs through dynamic response and simultaneous structure in process planning, the pr inciple solution for CAPP function system can be implemented. Lastly the mapping from process domain to module design domain is built. The unidirectional select ion process based on fuzzy matching technology is easily dealt with computer. Th e algorithm of decision with fuzzy synthetic evaluation method and technology is applied to estimate the feasibility of the results in local working procedure o f modular NC machine tools and make decision of designs in overall FTL, which co nsists of many different factors. The example shows that the rapid response desi gn in bidding-based FTL scheme design is realized.

采用Process Designer的白车身焊装生产线工艺规划研究

白车身焊装生产线工艺规划是决定汽车整车生产周期的重要环节。以先进的数字化工厂技术软件——ProcessDesigner为平台,通过创建制造信息模型和工艺过程模型,实现对白车身焊装生产线的生产信息管理和工艺过程规划,构建了白车身焊装生产线工艺规划系统,并详细描述了其工艺规划实现的具体方法和步骤,最后以某型白车身底板焊装线为例,生成了基于规划系统的数字化三维工厂,对规划结果进行了验证。结果表明,利用该系统进行焊装工艺规划能显著缩短工艺规划时间,提高工艺规划的准确性。

LineMaze——一种新的布线算法

本文针对李氏迷路法在晚期布线存在的问题,首次提出线迷路算法LineMa-ze。LiaeMaze 与李氏迷路法具有相同的绕障碍能力,但前者具有更高的效率。

Lessons learned from the “5.12” Wenchuan Earthquake:evaluation of earthquake performance objectives and the importance of seismic conceptual design principles

Many different types of buildings were severely damaged or collapsed during the May 12, 2008 Great Wenchuan Earthquake. Based on survey data collected in regions that were subjected to moderate to severe earthquake intensities, a comparison between the observed building damage, and the three earthquake performance objectives and seismic conceptual design principles specified by the national ＂Code for Seismic Design of Buildings GB50011-2001,＂ was carried out. Actual damage and predicted damage for a given earthquake level for different types of structures is compared. Discussions on seismic conceptual design principles, with respect to multiple defense lines, strong column-weak beam, link beam of shear walls, ductility detailing of masonry structures, exits and staircases, and nonstructural elements, etc. are carried out. Suggestions for improving the seismic design of structures are also proposed. It is concluded that the seismic performance objectives for three earthquake levels, i.e., ＂no failure under minor earthquake level, ＂＂repairable damage under moderate earthquake level＂ and ＂no collapse under major earthquake level＂ can be achieved if seismic design principles are carried out by strictly following the code requirements and ensuring construction quality.

Simplified design of rock cavern concrete lining to resist shock loading

A simplified method was proposed for the design of concrete lining in underground rock cavern/tunnel against shock loading. The loading may result from the detonation of explosives on ground surface or ground penetration projectiles exploding adjacent to the cavern/tunnel. The resulting problem necessitates the solution of the dynamics of a beam loaded by a transient pressure uniformly distributed over the span. According to mechanical characteristics of the system with rock bolt and shotcrete, a dynamic support design method based on equivalent single degree of freedom （SDOF） was put forward. The SDOF method was applied to obtaining the maximum displacement at the mid-span of the beam, which is often the controlling factor in the blast-resistant design. In the formulation of the problem, the proposed method combines the phenomena of spalling and structural dynamics theory. An example is provided to demonstrate the applicability of this simplified method.

FASTLINE系统在双隧道船型上的应用

本文首先介绍了ＦＡＳＴＬＩＮＥ船舶线型设计和光顺系统。然后以特殊船型双隧道的“新黄测１ 号水文测量船”为例，重点对如何应用ＦＡＳＴＬＩＮＥ系统对特殊船型的船舶线型进行光顺设计作了介绍。最后文中比较了ＦＡＳＴＬＩＮＥ系统与其它系统的计算结果，并列出了系统光顺后的线型图。

汽车仪表板A line布置设计分析

随着科技进步发展,人们越来越多的对汽车内饰仪表板美观性要求不断提高,仪表板前延伸板最高点,即A line的设计越来越被重视,文章通过对汽车仪表板A line的布置考虑因素及对A line布置设计的方法进行剖析,深入研究了A line的设计影响因素,并分别对benchmark车型数值进行分析,总结了IP A line上下极限位置及趋势确定步骤和方法,优化提供给造型进行IP前延伸板设计的带宽,为汽车仪表板A line布置设计方法提出了新的见解。

Modification Method of Lightning Shielding Angle Calculation for Transmission Lines in Mountain Areas

Shielding angle is one of the main factors influencing lightning performance of transmission lines,which always stays in the focus of the design and the evaluation of lightning protection.A formula for the improved shielding angle is proposed for evaluating the lightning performance in different terrains.The digital elevation model(DEM) is used to obtain the micro-topography data,such as the slope gradient,slope aspect,etc.The following results are obtained by analyzing the influence of topography factors on the improved shielding angle:(1) improved shielding angle non-linearly increases with the increase of the slope gradient and the slope aspect,(2) improved shielding angle is more sensitive to the slope gradient than to the slope aspect,(3) the improved shielding angle in the mountain terrains is much greater than the designed shielding angle.This may be the reason why the designed shielding angle is limited into the rational range,while the shielding faults occur frequently.

CONCURRENT PRODUCT PORTFOLIO PLANNING AND MIXED PRODUCT ASSEMBLY LINE BALANCING

Reconfigurable products and manufacturing systems have enabled manufacturers to provide ＂cost effective＂ variety to the market. In spite of these new technologies, the expense of manufacturing makes it infeasible to supply all the possible variants to the market for some industries. Therefore, the determination of the right number of product variantsto offer in the product portfolios becomes an important consideration. The product portfolio planning problem had been independently well studied from marketing and engineering perspectives. However, advantages can be gained from using a concurrent marketing and engineering approach. Concurrent product development strategies specifically for reconfigurable products and manufacturing systems can allow manufacturers to select best product portfolios from marketing, product design and manufacturing perspectives. A methodology for the concurrent design of a product portfolio and assembly system is presented. The objective of the concurrent product portfolio planning and assembly system design problem is to obtain the product variants that will make up the product portfolio such that oversupply of optional modules is minimized and the assembly line efficiency is maximized. Explicit design of the assembly system is obtained during the solution of the problem. It is assumed that the demand for optional modules and the assembly times for these modules are known a priori. A genetic algorithm is used in the solution of the problem. The basic premise of this methodology is that the selected product portfolio has a significant impact on the solution of the assembly line balancing problem. An example is used to validate this hypothesis. The example is then further developed to demonstrate how the methodology can be used to obtain the optimal product portfolio. This approach is intended for use by manufacturers during the early design stages of product family design.

Design and Evaluation of Dadu Canal Lining for Sustainable Water Saving

Pakistan livelihood depends on agriculture and so for this on irrigation system. The irrigation system in Sindh province depends on three barrages. The canals off taking from these three barrages irrigate 5.5 million hectares of agriculture land. Sukkur Barrage, which is the oldest one, irrigates more than 2.0 million hectares of land. The Dadu Canal off taking from Sukkur barrage is an earthen canal. A huge amount of irrigation water is lost from the canal in the form of seepage from banks and bed. It is estimated that 40 to 50 per cent of water is lost between the canal head works to the farm-gate. The seepage from the canal creates twin problems of salinity and water logging consequently a large agriculture land has gone out of use, and this process is continued particularly in Sindh. Lining of Canals is considered an effective solution to this problem. But lining of canals in Sindh is a great issue as canals will need to be closed long enough to deprive the farmers at least one crop season and the farmers are unable to pay this price for canal. Therefore, in this study, the Dadu Canal is proposed to be redesigned as an adjacent lined canal which involves design of cross section for various lining options at locations where changes in the hydraulic conditions occur at cross regulators and fall structures. The proposed lining is preferred to be plain cement concrete lining which is selected after investigating local conditions. Quantity and cost estimation at selected RDs (Reduced Distance) proved feasible and significant in long term functioning of Dadu Canal.